aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2008-07-11Added Targa Visionary 1000 IDE adapter to pata_sis.cKai Krakow
This enables short 40-wire detection for my laptop thus enabling UDMA/100. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11libata-acpi: filter out DIPM enableTejun Heo
Some BIOSen enable DIPM via _GTF which causes command timeouts under certain configuration. This didn't occur on 2.6.25 because 2.6.25 defaulted to SRST, so _GTF wasn't executed during boot probe, so ahci host reset disabled DIPM and as _GTF wasn't executed after SRST, DIPM wasn't enabled. On 2.6.26, hardreset is used during probe and after probe _GTF is executed enabling DIPM and thus the failures. This patch could theoretically disable DIPM on machines which used to have it enabled on 2.6.25 but AFAIK ahci is currently the only driver which uses SATA ACPI hierarchy (_SDD) and as the host reset would have always disabled DIPM, this shouldn't happen. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-05ahci: give another shot at clearing all bits in irq_statTejun Heo
Commit ea0c62f7cf70f13a67830471b613337bd0c9a62e tried to clear all bits in irq_stat but it didn't actually achieve that as irq_stat was anded with port_map right after read. This patch makes ahci driver always use the unmasked value to clear irq_status. While at it, add explanation on the peculiarities of ahci IRQ clearing. This was spotted by Linus Torvalds. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04sata_mv: safer logic for limit_warningsMark Lord
There is a miniscule chance that two separate host controllers might be in sata_mv at the same time and manage to decrement the static limit_warnings variable below zero. Fix the comparison to deal with it. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04libata-sff: improve HSM violation reportingTejun Heo
Improve SFF HSM violation reporting such that each HSM violation can be distinguished using ehi_desc. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ahci: always clear all bits in irq_statTejun Heo
Some AHCI controllers (ICH7 was reported) set pending bit in HOST_IRQ_STAT for non-existent ports and when it's not cleared falls into IRQ storm. Always clear full irq_stat instead of only the bits that are handled. As nothing changes for recognized ports, the risk of breaking things is pretty low. Reported and verified by Philipp Thomas in the following suse bugzilla. https://bugzilla.novell.com/attachment.cgi?id=215692 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Philipp Thomas <pth@novell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04sata_sil24: add DID for another adaptec flavorTejun Heo
There's another DID used for Adaptec card. Add it. Reported by Travis Read. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Travis Read <ics@dark.net.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04block: add blk_queue_update_dma_padFUJITA Tomonori
This adds blk_queue_update_dma_pad to prevent LLDs from overwriting the dma pad mask wrongly (we added blk_queue_update_dma_alignment due to the same reason). This also converts libata to use blk_queue_update_dma_pad instead of blk_queue_dma_pad. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <htejun@gmail.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-27sata_uli: hardreset is brokenTejun Heo
sata_uli can't do hardresets reliably and lock up. This went unnoticed till now as softreset was the default and hardreset was only used after softreset failed. Reported by Christian Casteyde in bz#10860. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christian Casteyde <casteyde.christian@free.fr> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: BAST: Remove old IDE driver pcmcia ide kingston compactflash's have a new manufacturer id pcmcia: add another pata/ide ID pcmcia: add an pata/ide ID ide: increase timeout in wait_drive_not_busy() palm_bk3710: fix resource management
2008-06-20pcmcia: add another pata/ide IDKristoffer Ericson
Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters <w1ll14@gmail.com> Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-20pcmcia: add an pata/ide IDMatt Reimer
Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-18ahci: sis can't do PMPTejun Heo
From: Piter PUNK <piterpunk@slackware.com> SiS AHCIs say they can do PMP but can't and fail detection if SRST w/ pmp==15 is used. Turn off PMP support. tj: added patch description, adapted patch to #upstream-fixes and renamed board_ahci_sis to board_ahci_nopmp. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18ata_piix: add TECRA M4 to broken suspend listTejun Heo
TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driverBen Dooks
Add HAVE_PATA_PLATFORM to select the pata platform driver to ensure that we do not end up with a long 'depends on' list when other users of this driver turn up. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18sata_mv: warn on PIO with multiple DRQsMark Lord
Chip errata sometimes prevents reliable use of PIO commands which involve more than a single DRQ (data request). In normal operation, libata should not generate such PIO commands (uses DMA instead), but they could be sent in via SG_IO from userspace. A full workaround might be to break up such commands into sequences of single DRQ ones, but that's just way too complex for something that doesn't normally happen in real life. So, allow the attempt (it often works, despite the errata), but log the event for reference when somebody screams. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18sata_mv: enable async_notify for 60x1 Rev.C0 and higherMark Lord
The early chipsets cannot safely handle Async Notification (AN), but 6041/6081 chip revision "C0" (and newer) can handle it. So allow AN for "C0" and higher. This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18libata: don't check whether to use DMA or not for no data commandsTejun Heo
There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-18ahci: jmb361 has only one portTejun Heo
JMB361 has only one port but reports it has two causing longish probe failure on the second one. Quirk it. Reported by Gajo Petrovic in bz 10911. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Gajo Petrovic <gajo01@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-13ahci: Workaround HW bug for SB600/700 SATA controller PMP supportShane Huang
There is one bug in ATI SATA PMP of SB600 and SB700 old revision, which leads to soft reset failure. This patch can fix the bug. Signed-off-by: Shane Huang <shane.huang@amd.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-13ahci: workarounds for mcp65Tejun Heo
MCP65 ahci can do NCQ but doesn't set the CAP bit and rev A0 and A1 can't do MSI but have MSI capability. Implement AHCI_HFLAG_YES_NCQ and apply appropriate workarounds. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-05libata: fix G5 SATA broken on -rc5Hugh Dickins
Fix G5 SATA irq 18: nobody cared, reported on -rc5 by Olaf Hering: fixlet to a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Tested-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-04libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctlAlan Cox
- Make ata_sff_altstatus private so nobody uses it by mistake - Drop the 400nS delay from it Add ata_sff_irq_status - encapsulates the IRQ check logic This function keeps the existing behaviour for altstatus using devices. I actually suspect the logic was wrong before the changes but -rc isn't the time to play with that ata_sff_sync - ensure writes hit the device Really we want an io* operation for 'is posted' eg ioisposted(ioaddr) so that we can fix the nasty delay this causes on most systems. - ata_sff_pause - 400nS delay Ensure the command hit the device and delay 400nS - ata_sff_dma_pause Ensure the I/O hit the device and enforce an HDMA1:0 transition delay. Requires altstatus register exists, BUG if not so we don't risk corruption in MWDMA modes. (UDMA the checksum will save your backside in theory) The only other complication then is devices with their own handlers. rb532 can use dma_pause but scc needs to access its own altstatus register for internal errata workarounds so directly call the drivers own altstatus function. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-04sata_mv: PHY_MODE4 cleanupsMark Lord
The handling for PHY_MODE4 was originally just cloned from the Marvell proprietary driver (with their blessing). But we can do better than that. Tidy things up with some judicious mask definitions, to improve maintainability. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-04[libata] ata_piix: more acer short cable quirksColin Ian King
Add ICH6 on ACER Aspire 1694WLMi to list of laptops that use short cables rather than 80 wire OriginalAuthor: Tiago Sousa OriginalLocation: http://launchpadlibrarian.net/11627664/new.ich_laptop.short.cables.diff Bug: #187121 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-04[libata] ACPI: Properly handle bay devices in dock stationsHolger Macht
* Differentiate between bay devices in dock stations and others: - When an ACPI_NOTIFY_EJECT_REQUEST appears, just signal uevent to userspace (that is when the optional eject button on a bay device is pressed/pulled) giving the possibility to unmount file systems and to clean up. Also, only send uevent in case we get an EJECT_REQUEST without doing anything else. In other cases, you'll get an add/remove event because libata attaches/detaches the device. - In case of a dock event, which in turn signals an ACPI_NOTIFY_EJECT_REQUEST, immediately detach the device, because it may already have been gone * In case of an ACPI_NOTIFY_DEVICE/BUS_CHECK, evaluate _STA to check if the device has been plugged or unplugged. If plugged, hotplug it, if unplugged, just signal event to userspace (initial patch by Matthew Garrett <mjg59@srcf.ucam.org>) * Call ACPI _EJ0 for detached devices Signed-off-by: Holger Macht <hmacht@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.cpeerchen
Change the partial Device IDs of nvidia MCP7B AHCI controller in ahci.c, as the actual PCI IDs deployed in the field differed from the forecasted ones preemptively placed in the driver. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30[libata] sata_fsl: Fix broken driver, add port multiplier (PMP) supportAshish Kalra
The following commit (4c9bf4e799ce06a7378f1196587084802a414c03): libata: replace tf_read with qc_fill_rtf for non-SFF drivers Broke the sata_fsl.c driver in 2.6.26-rc. I know the following patch fixes the issue, it clearly also adds port multipler support. The current 2.6.26-rc driver is broken. On boot with debug enabled we get something like (w/o this patch): spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 .. continues for ever. This change fixes this as a side effect of adding port multiplier support. Signed-off-by: Ashish Kalra <ashish.kalra@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30libata: SRST can't be trusted on PMP sil3726Tejun Heo
As in sil4726, SRST can't be trusted on sil3726 causing detection problems under certain configuraitons. I thought it was from the Config Disk device but apparently not. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30libata: fix libata-scsi kernel-doc notationRandy Dunlap
Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30ata: Convert to static DEFINE_SPINLOCK(lock)Pradeep Singh Rautela
Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh <rautelap@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30ata_piix: fix macbook ich8m problemsTejun Heo
ICH8M on macbooks are peculiar in that some of them lock up when the second port is enabled, some return bogus values on SIDPR access while yet others hang on SIDPR access. Also, the ich8m_apple_sata entry was wrongly added below generic ich8m entry making it virtually useless. This patch works around macbook ich8m problems by * moving ich8m_apple_sata entry above generic ich8m entry * dropping PIIX_FLAG_SIDPR from ich8m_apple_sata * adding subsystem 106b:00a1 as ich8m_apple_sata Reported and tested by MATSUBAYASHI. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: MATSUBAYASHI 'Shaolin' Kohji <shaolin@rhythmaning.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: implement SoC guideline SATA_S11Mark Lord
The 5182 System-On-Chip (SOC) variant wants certain lower bits to be cleared on any write to the PHY_MODE3 register. If/when support is added for other SOC variants, we'll need some way to uniquely identify the 5182, and not perform this workaround for the others. But for now, it is the only SOC variant we support here. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: workaround for 60x1 errata sata13Mark Lord
The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: nuke unreleased GenIIe revisionsMark Lord
The only public release of the 6042/7042 chips was/is revision "B0". Remove code that attempted to deal with earlier, non-released revs. This matches the logic of the current Marvell "proprietary" driver. Also, bump up the sata_mv version number, to reflect this batch of erratas. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: PHY_MODEx errata fixesMark Lord
Fix and update the errata handling for the PHY_MODEx registers. This improves receiver noise tolerance, among other things. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: move SOC_FLAG to hprivMark Lord
Convert the System-on-Chip flag from a host flag to an hpriv flag, for better consistency with other chip-rev flags, and for easier use in errata fixes etc. Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency of naming/use (everything else SOC-related already uses "SOC"). There are no functionality changes in this patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19drivers/ata: trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19Fixups to ATA ACPI hotplugMatthew Garrett
The libata-acpi.c code currently accepts hotplug messages from both the port and the device. This does not match the behaviour of the bay driver, and may result in confusion when two hotplug requests are received for the same device. This patch limits the hotplug notification to removable ACPI devices, which in turn allows it to use the _STA method to determine whether the device has been removed or inserted. On removal, devices are marked as detached. On insertion, a hotplug scan is started. This should avoid lockups caused by the ata layer attempting to scan devices which have been removed. The uevent sending is moved outside the spinlock in order to avoid a warning generated by it firing when interrupts are disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: ignore SIMG4726 config pseudo deviceTejun Heo
I was hoping ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM could keep it happy but no even this doesn't work under certain configurations and it's not like we can do anything useful with the cofig device anyway. Replace ATA_HORKAGE_SKIP_PM with ATA_HORKAGE_DISABLE and use it for the config device. This makes the device completely ignored by libata. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19sata_sil24: don't use NCQ if marvell 4140 PMP is attachedTejun Heo
When 4140 PMP is attached to sil24, NCQ commands to fan out port 1 and 2 (0 based) often stall if commands are in progress to other ports. I've tried a number of things but can't tell what's going on. It never happens w/ ahci and reportedly sata_mv which can issue NCQ commands to multiple devices simultaneously like sil24 does. Disable NCQ for devices behind 4140 PMP for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: don't schedule LPM action seperately during probingTejun Heo
There's no reason to schedule LPM action after probing is complete causing another EH iteration. Just schedule it together with probing itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: make sure PMP notification is turned off during recoveryTejun Heo
PMP notification during reset can make some controllers fail reset processing and needs to be turned off during resets. PMP attach and full-revalidation path did this via sata_pmp_configure() but the quick revalidation wasn't. Move the notification disable code right above fan-out port recovery so that it's always turned off. This fixes obscure reset failures. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: increase PMP register access timeout to 3sTejun Heo
This timeout was set low because previously PMP register access was done via polling and register access timeouts could stack up. This is no longer the case. One timeout will make all following accesses fail immediately. In rare cases both marvell and SIMG PMPs need almost a second. Bump it to 3s. While at it, rename it to SATA_PMP_RW_TIMEOUT. It's not specific to SCR access. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: ignore recovered PHY errorsTejun Heo
No reason to get overzealous about recovered comm and data errors. Some PHYs habitually sets them w/o no good reason and being draconian about these soft error conditions doesn't seem to help anybody. If need ever rises, we might need to add soft PHY error condition, say AC_ERR_MAYBE_ATA_BUS and use it only to determine whether speed down is necessary but I don't think that's very likely to happen. It's far more likely we'll get timeouts or fatal transmission errors if recovered errors are so prominent that they hamper operation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: kill hotplug related race conditionTejun Heo
Originally, whole reset processing was done while the port is frozen and SError was cleared during @postreset(). This had two race conditions. 1: hotplug could occur after reset but before SError is cleared and libata won't know about it. 2: hotplug could occur after all the reset is complete but before the port is thawed. As all events are cleared on thaw, the hotplug event would be lost. Commit ac371987a81c61c2efbd6931245cdcaf43baad89 kills the first race by clearing SError during link resume but before link onlineness test. However, this doesn't fix race #2 and in some cases clearing SError after SRST is a good idea. This patch solves this problem by cross checking link onlineness with classification result after SError is cleared and port is thawed. Reset is retried if link is online but all devices attached to the link are unknown. As all devices will be revalidated, this one-way check is enough to ensure that all devices are detected and revalidated reliably. This, luckily, also fixes the cases where host controller returns bogus status while harddrive is spinning up after hotplug making classification run before the device sends the first FIS and thus causes misdetection. Low level drivers can bypass the logic by setting class explicitly to ATA_DEV_NONE if ever necessary (currently none requires this). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: move reset freeze/thaw handling into ata_eh_reset()Tejun Heo
Previously reset freeze/thaw handling lived outside of ata_eh_reset() mainly because the original PMP reset code needed the port frozen while resetting all the fan-out ports, which is no longer the case. This patch moves freeze/thaw handling into ata_eh_reset(). @prereset() and @postreset() are now called w/o freezing the port although @prereset() an be called frozen if the port is frozen prior to entering ata_eh_reset(). This makes code simpler and will help removing hotplug event related races. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: reorganize ata_eh_reset() no reset method pathTejun Heo
Reorganize ata_eh_reset() such that @prereset() is called even when no reset method is available and if block is used instead of goto to skip actual reset. This makes no reset case behave better (readiness wait) and future changes easier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19libata: fix sata_link_hardreset() @online out parameter handlingTejun Heo
The @online out parameter is supposed to set to true iff link is online and reset succeeded as advertised in the function description and callers are coded expecting that. However, sata_link_reset() didn't behave this way on device readiness test failure. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19sata_promise: other cleanupsMikael Pettersson
Minor coding-style fixes for sata_promise: - remove stray blank lines - fix checkpatch.pl errors; warnings about long lines remain, but I don't intend to address those at this time - remove two inline directives: neither is essential and both functions are trivially inlinable anyway by virtue of being static and having a single unique call site - fix comment in pdc_interrupt(): the bits in PDC_INT_SEQMASK denote SEQIDs not tags, the distinction becomes important when NCQ gets implemented Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>