aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2008-03-29libata: ATA_EHI_LPM should be ATA_EH_LPMTejun Heo
EH actions are ATA_EH_* not ATA_EHI_*. Rename ATA_EHI_LPM to ATA_EH_LPM. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-29pata_sil680: only enable MMIO on Cell bladesBenjamin Herrenschmidt
There have been reported regressions of the SIL 680 driver when using MMIO, so this makes it only try MMIO on Cell blades where it's known to be necessary (the host bridge doesn't do PIO on these). We'll try to find the root problem with MMIO separately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-24[libata] ahci: SB600 workaround is suspect... play it safe for nowJeff Garzik
At least one report claims that a878539ef994787c447a98c2e3ba0fe3dad984ec failed to solve lockups, whereas the old limit-to-32-bit trick worked. Restore the 32-bit limit, but also leave the 255-sector limit in place, because we know that's needed as well. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-24sata_promise: fix hardreset hotplug events, take 2Mikael Pettersson
A Promise SATA controller will signal hotplug events when a hard reset (COMRESET) is done on a port. These events aren't masked by the driver, and the unexpected interrupts will cause a sequence of failed reset attempts util libata's EH finally gives up. This has not been a common problem so far, but the pending libata hardreset-by-default changes makes it a critical issue. The solution is to disable hotplug events before a reset, and to reenable them afterwards. (Promise's driver does this too.) This patch adds SATA-specific versions of ->freeze() and ->thaw() that also disable and enable hotplug events. PATA ports continue to use the old versions of ->freeze() and ->thaw(). Accesses to the hotplug register must be serialised via host->lock. We rely on ap->lock == &ap->host->lock and that libata takes this lock before ->freeze() and ->thaw(). Document this requirement. The interrupt handler is adjusted so its hotplug register accesses are inside the region protected by host->lock. Tested on various chips (SATA300TX4, SATA300TX2plus, SATAII150TX4, FastTrack TX4000) with various combinations of SATA and PATA disks, with and without the pending hardreset-by-default changes. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-24libata: improve HPA error handlingTejun Heo
There's no point in retrying and eventually failing device detection when the device rejects READ_NATIVE_MAX[_EXT]. Disable HPA unlocking if READ_NATIVE_MAX[_EXT] is rejected as done when SET_MAX[_EXT] is rejected. This allows some old drives to work even if they aren't blacklisted. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-24libata: assume no device is attached if both IDENTIFYs are abortedTejun Heo
This is to fix bugzilla #10254. QSI cdrom attached to pata_sis as secondary master appears as phantom device for the slave. Interestingly, instead of not setting DRQ after IDENTIFY which triggers NODEV_HINT, it aborts both IDENTIFY and IDENTIFY PACKET which makes EH retry. Modify EH such that it assumes no device is attached if both flavors of IDENTIFY are aborted by the device. There really isn't much point in retrying when the device actively aborts the commands. While at it, convert NODEV detection message to ata_dev_printk() to help debugging obscure detection problems. This problem was reported by Jan Bücken. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jan Bücken <jb.faq@gmx.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-24pata_it821x: use raw nbytes in check_atapi_dmaTejun Heo
pata_it821x needs to look at raw request size in check_atapi_dma(). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-24libata: implement ata_qc_raw_nbytes()Tejun Heo
Implement ata_qc_raw_nbytes() which determines the raw user-requested size of a PC command. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-18ACPI: fix ATA_ACPI buildLen Brown
drivers/ata/libata-acpi.c fails to build drivers/built-in.o: In function `ata_acpi_associate': (.text+0x7106a): undefined reference to `register_hotplug_dock_device' When CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m But if dock is selected from ata_acpi, dock will =y when ata_acpi=y, avoiding this problem. http://bugzilla.kernel.org/show_bug.cgi?id=10272 Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-17ahci: Add Marvell 6121 SATA supportJose Alberto Reguero
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17pata_ali: use atapi_cmd_type() to determine cmd type instead of transfer sizeTejun Heo
pata_ali was using qc->nbytes to determine whether a command is data transfer type or not. As now qc->nbytes can be extended by padding and draining buffers, these tests are not useful anymore. Use atapi_cmd_type() instead. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17ahci: implement skip_host_reset parameterTejun Heo
Under certain circumstances (SSP turned off by the BIOS) and for debugging purposes, skipping global controller reset is helpful. Add a kernel parameter for it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17ahci: request all PCI BARsTejun Heo
ahci is often implemented with accompanying SFF compatible interface and legacy IDE driver may attach to the legacy IO ports when the controller is already claimed by ahci and vice-versa. This patch makes ahci use pcim_iomap_regions_request_all() so that all IO regions are claimed on attach. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-17libata-acpi: improve dock event handlingTejun Heo
Improve ACPI hotplug handling such that dock event is handled properly. * Register handlers for dock events. * Directly detach device on EJECT_REQUEST instead of signaling hotplug event. This prevents libata from accessing severed controller and/or device. * While at it, use named constants for ACPI events and move uevent signaling inside host lock. Original patch and testing by Holger Macht. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Holger Macht <hmacht@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10[libata] Add support for the RB500 PATA CompactFlashFlorian Fainelli
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10ahci: logical-bitwise and confusion in ahci_save_initial_config()Roel Kluin
logical-bitwise & confusion Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10libata: don't allow sysfs read access to force paramTejun Heo
Buffer for force param is deallocated after initialization, so trying to read it via sysfs results in oops. Don't allow read access to the param node. Spotted by Eric Sesterhenn. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10ahci: add the Device IDs for nvidia MCP7B AHCIpeerchen
Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10libata-sff: handle controllers w/o ctl registerTejun Heo
SFF incorrectly assumed that ctl register is available for all controllers while some old SFF controllers don't have ctl register. Make SFF handle controllers w/o ctl register by conditionalizing ctl register access and softreset method. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10libata: allow LLDs w/o any reset methodTejun Heo
Some old SFF controllers don't have any way to reset the channel. Currently, this isn't supported and libata EH causes an oops. Allow LLDs w/o any reset method and just assume ATA class in such cases. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-10ata: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05ahci: work around ATI SB600 h/w quirkJeff Garzik
This addresses the recent ATI SB600 errata, where the hardware does not like 256-length PRD entries during FPDMA (aka NCQ). It hurts performance on SB600, but it is more important to get a correct patch eliminating the data corruption/lockups, and then later on tune for performance. We simply limit each command to a maximum of 255 sectors, on SB600. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-05pata_hpt*, pata_serverworks: fix UDMA maskingAlan Cox
When masking, mask out the modes that are unsupported not the ones that are supported. This makes life happier. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-04block: separate out padding from alignmentTejun Heo
Block layer alignment was used for two different purposes - memory alignment and padding. This causes problems in lower layers because drivers which only require memory alignment ends up with adjusted rq->data_len. Separate out padding such that padding occurs iff driver explicitly requests it. Tomo: restorethe code to update bio in blk_rq_map_user introduced by the commit 40b01b9bbdf51ae543a04744283bf2d56c4a6afa according to padding alignment. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-04block: restore the meaning of rq->data_len to the true data lengthFUJITA Tomonori
The meaning of rq->data_len was changed to the length of an allocated buffer from the true data length. It breaks SG_IO friends and bsg. This patch restores the meaning of rq->data_len to the true data length and adds rq->extra_len to store an extended length (due to drain buffer and padding). This patch also removes the code to update bio in blk_rq_map_user introduced by the commit 40b01b9bbdf51ae543a04744283bf2d56c4a6afa. The commit adjusts bio according to memory alignment (queue_dma_alignment). However, memory alignment is NOT padding alignment. This adjustment also breaks SG_IO friends and bsg. Padding alignment needs to be fixed in a proper way (by a separate patch). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
2008-02-29[libata] wrap kmap_atomic(KM_IRQ0) with local_irq_save/restore()Jeff Garzik
Interrupts must be disabled if using kmap_atomic(KM_IRQ0), but that was not the case in a few code paths coming directly from ATA driver interrupt handlers (which use spin_lock rather than spin_lock_irqsave). Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-28sata_svw: Add support for HT1100 SATA controllerAnantha Subramanyam
This patch adds support (including ATAPI DMA) for HT1100 (aka BCM11000) SATA controller. Signed-off-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-25Revert "power_state: get rid of write-only variable in SATA"Jeff Garzik
This reverts commit 559bbe6cbd0d8c68d40076a5f7dc98e3bf5864b2. Michael S. Tsirkin reports that this changes breaks suspend/resume. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-25make atapi_dmadir staticAdrian Bunk
atapi_dmadir can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24libata-core: fix kernel-doc warningRandy Dunlap
Fix libata-core kernel-doc warning: Warning(linux-2.6.25-rc2-git6//drivers/ata/libata-core.c:168): No description found for parameter 'ap' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24sata_fsl: fix build with ATA_VERBOSE_DEBUGAnton Vorontsov
This patch fixes build and few warnings when ATA_VERBOSE_DEBUG is defined: CC drivers/ata/sata_fsl.o drivers/ata/sata_fsl.c: In function ‘sata_fsl_fill_sg’: drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 3 has type ‘void *’ drivers/ata/sata_fsl.c:338: warning: format ‘%x’ expects type ‘unsigned int’, but argument 4 has type ‘struct prde *’ drivers/ata/sata_fsl.c: In function ‘sata_fsl_qc_issue’: drivers/ata/sata_fsl.c:459: error: ‘csr_base’ undeclared (first use in this function) drivers/ata/sata_fsl.c:459: error: (Each undeclared identifier is reported only once drivers/ata/sata_fsl.c:459: error: for each function it appears in.) drivers/ata/sata_fsl.c: In function ‘sata_fsl_freeze’: drivers/ata/sata_fsl.c:525: error: ‘csr_base’ undeclared (first use in this function) make[2]: *** [drivers/ata/sata_fsl.o] Error 1 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24[libata] ahci: AMD SB700/SB800 SATA support 64bit DMAShane Huang
SB700 SATA controller can support 64 bit DMA, the previous commit badc2341579511a247f5993865aa68379e283c5c was added with careless reference to SB600, which should be modified by this patch. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24libata-pmp: clear hob for pmp register accessesMark Lord
>> Mark Lord wrote: >>> Tejun, I've added PMP to sata_mv, and am now trying to get it >>> to work with a Marvell PM attached. >>> >>> And the behaviour I see is very bizarre. >>> >>> After hard+soft resets, the PM signature is found, >>> and libata interrogates the PM registers. >>> >>> It successfully reads register 0, and then register 1. >>> But all subsequent registers read out (incorrectly) as zeros. ... This behavior has been confirmed by Marvell with a SATA analyzer. The Marvell port-multiplier apparently likes to see clean HOB information when accessing PMP registers. Since sata_mv uses PIO shadow register access, this doesn't happen automatically, as it might in a more purely FIS-based driver (eg. ahci). One way to fix this is to flag these commands with ATA_TFLAG_LBA48, forcing libata to write out the HOB fields with known (zero) values. Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24libata: automatically use DMADIR if drive/bridge requires itTejun Heo
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24power_state: get rid of write-only variable in SATAPavel Machek
power_state is scheduled for removal, and libata uses it in write-only mode. Remove it. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24pata_atiixp: Use 255 sector limitAlan Cox
AHCI needs sorting too but this deals with the old interface Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-20libata: fix kernel-doc parameter warningRandy Dunlap
Fix libata kernel-doc parameter: Warning(linux-2.6.25-rc2-git3//drivers/ata/libata-scsi.c:845): No description found for parameter 'rq' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20sata_mv: remove iounmap in mv_platform_remove and use devm_iomapSaeed Bishara
this will fix crash bug when doing rmmod to the driver, this is because the port_stop function get called later and it could access the device's registers. Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20libata: implement libata.force module parameterTejun Heo
This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20sata_mv: use hpriv->base instead of the host->iomapSaeed Bishara
this fixes crash bug as the iomap table is not valid for integrated controllers. Signed-off-by: Saeed Bishara <saeed@marvell.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20sata_mv: Define module alias for platform deviceMartin Michlmayr
The sata_mv driver can be loaded as a platform device, as is done by various Orion (ARM) based devices. The driver needs to define a module alias for the platform driver so udev will load it automatically. Tested with Debian on a QNAP TS-209. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20ata: fix sparse warnings in pata_legacy.cHarvey Harrison
Use ld_qdi and ld_winbond to avoid shadowing static int variables qdi and winbond. The ld_ prefix refers to legacy_data. drivers/ata/pata_legacy.c:777:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:811:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:848:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:882:21: warning: symbol 'qdi' shadows an earlier one drivers/ata/pata_legacy.c:128:12: originally declared here drivers/ata/pata_legacy.c:1040:21: warning: symbol 'winbond' shadows an earlier one drivers/ata/pata_legacy.c:129:12: originally declared here Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-19libata: implement drain buffersJames Bottomley
This just updates the libata slave configure routine to take advantage of the block layer drain buffers. It also adjusts the size lengths in the atapi code to add the drain buffer to the DMA length so the driver knows it can rely on it. I suspect I should also be checking for AHCI as well as ATA_DEV_ATAPI, but I couldn't see how to do that easily. tj: * atapi_drain_needed() added such that draining is applied to only misc ATAPI commands. * q->bounce_gfp used when allocating drain buffer. * Now duplicate ATAPI PIO drain logic dropped. * ata_dev_printk() used instead of sdev_printk(). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19libata: eliminate the home grown dma padding in favour ofJames Bottomley
that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19libata: update ATAPI overflow drainingTejun Heo
For misc ATAPI commands which transfer variable length data to the host, overflow can occur due to application or hardware bug. Such overflows can be ignored safely as long as overflow data is properly drained. libata HSM implementation has this implemented in __atapi_pio_bytes() and recently updated for 2.6.24-rc but it requires further improvements. Improve drain logic such that... * Report overflow errors using ehi desc mechanism instead of printing directly. * Properly calculate the number of bytes to be drained considering actual number of consumed bytes for partial draining. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19ide/libata: ST310211A has buggy HPA tooMikko Rapeli
Signed-off-by: Mikko Rapeli <mikko.rapeli@teleca.com> Tested-by: Bart Champagne <bart@as35701.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-15ata: fix sparse warning in pata_acpi.cHarvey Harrison
drivers/ata/pata_acpi.c:80:2: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-15ata: fix sparse warning in pata_marvell.cHarvey Harrison
drivers/ata/pata_marvell.c:88:2: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-15ata: fix sparse warning in pata_jmicron.cHarvey Harrison
drivers/ata/pata_jmicron.c:118:2: warning: returning void-valued expression Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>