aboutsummaryrefslogtreecommitdiff
path: root/drivers/base/bus.c
AgeCommit message (Collapse)Author
2006-07-12[PATCH] Driver core: bus.c cleanupsAdrian Bunk
This patch contains the following cleanups: - make the needlessly global bus_subsys static - #if 0 the unused find_bus() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-21[PATCH] Driver core: add generic "subsystem" link to all devicesKay Sievers
Like the SUBSYTEM= key we find in the environment of the uevent, this creates a generic "subsystem" link in sysfs for every device. Userspace usually doesn't care at all if its a "class" or a "bus" device. This provides an unified way to determine the subsytem of a device, regardless of the way the driver core has created it. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] Driver Core: remove unused exportsGreg Kroah-Hartman
Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] Driver core: bus device event delayKay Sievers
split bus_add_device() and send device uevents after sysfs population Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] driver core: driver_bind attribute returns incorrect valueRyan Wilson
The manual driver <-> device binding attribute in sysfs doesn't return the correct value on failure or success of driver_probe_device. driver_probe_device returns 1 on success (the driver accepted the device) or 0 on probe failure (when the driver didn't accept the device but no real error occured). However, the attribute can't just return 0 or 1, it must return the number of bytes consumed from buf or an error value. Returning 0 indicates to userspace that nothing was written (even though the kernel has tried to do the bind/probe and failed). Returning 1 indicates that only one character was accepted in which case userspace will re-try the write with a partial string. A more correct version of driver_bind would return count (to indicate the entire string was consumed) when driver_probe_device returns 1 and -ENODEV when driver_probe_device returns 0. This patch makes that change. Signed-off-by: Ryan Wilson <hap9@epoch.ncsc.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-14[SCSI] drivers/base/bus.c - export reprobeMoore, Eric
Adding support for exposing hidden raid components for sg interface. The sdev->no_uld_attach flag will set set accordingly. The sas module supports adding/removing raid volumes using online storage management application interface. This patch was provided to me by Christoph Hellwig. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-07[PATCH] drivers/base/bus.c warning fixesRussell King
drivers/base/bus.c:166: warning: `driver_attr_unbind' defined but not used drivers/base/bus.c:194: warning: `driver_attr_bind' defined but not used Looks like these two attributes and supporting functions want to be #ifdef HOTPLUG'd Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-04[PATCH] Driver core: only all userspace bind/unbind if CONFIG_HOTPLUG is enabledGreg Kroah-Hartman
Thanks to drivers making their id tables __devinit, we can't allow userspace to bind or unbind drivers from devices manually through sysfs. So we only allow this if CONFIG_HOTPLUG is enabled. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] Hold the device's parent's lock during probe and removeAlan Stern
This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-23[PATCH] Small fixes to driver coreAlan Stern
This patch (as603) makes a few small fixes to the driver core: Change spin_lock_irq for a klist lock to spin_lock; Fix reference count leaks; Minor spelling and formatting changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] fix klist semantics for lists which have elements removed on traversalJames Bottomley
The problem is that klists claim to provide semantics for safe traversal of lists which are being modified. The failure case is when traversal of a list causes element removal (a fairly common case). The issue is that although the list node is refcounted, if it is embedded in an object (which is universally the case), then the object will be freed regardless of the klist refcount leading to slab corruption because the klist iterator refers to the prior element to get the next. The solution is to make the klist take and release references to the embedding object meaning that the embedding object won't be released until the list relinquishes the reference to it. (akpm: fast-track this because it's needed for the 2.6.13 scsi merge) Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] klist: fix klist to have the same klist_add semantics as list_headJames Bottomley
at the moment, the list_head semantics are list_add(node, head) whereas current klist semantics are klist_add(head, node) This is bound to cause confusion, and since klist is the newcomer, it should follow the list_head semantics. I also added missing include guards to klist.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05[PATCH] Fix manual binding infinite loopGreg Kroah-Hartman
Fix for manual binding of drivers to devices. Problem is if you pass in a valid device id, but the driver refuses to bind. Infinite loop as write() tries to resubmit the data it just sent. Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the problem out. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-17[PATCH] Fix manual binding infinite loopGreg KH
Fix for manual binding of drivers to devices. Problem is if you pass in a valid device id, but the driver refuses to bind. Infinite loop as write() tries to resubmit the data it just sent. Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the problem out. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-29[PATCH] driver core: change bus_rescan_devices to return voidGreg Kroah-Hartman
No one was looking at the return value of bus_rescan_devices, and it really wasn't anything that anyone in the kernel would ever care about. So change it which enabled some counting code to be removed also. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29[PATCH] driver core: Add the ability to bind drivers to devices from userspaceGreg Kroah-Hartman
This adds a single file, "bind", to the sysfs directory of every driver registered with the driver core. To bind a device to a driver, write the bus id of the device you wish to bind to that specific driver to the "bind" file (remember to not add a trailing \n). If that bus id matches a device on that bus, and it does not currently have a driver bound to it, the probe sequence will be initiated with that driver and device. Note, this requires that the driver itself be willing and able to accept that device (usually through a device id type table). This patch does not make it possible to override the driver's id table. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29[PATCH] driver core: Add the ability to unbind drivers to devices from userspaceGreg Kroah-Hartman
This adds a single file, "unbind", to the sysfs directory of every device that is currently bound to a driver. To unbind the driver from the device, write anything to this file and they will be disconnected from each other. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29[PATCH] driver core: add bus_find_device & driver_find_device functionsCornelia Huck
Add bus_find_device() and driver_find_device() which allow searching for a device in the bus's resp. the driver's klist and obtain a reference on it. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-22[PATCH] driver core: Fix up the device_attach() error handling in ↵Greg Kroah-Hartman
bus_add_device() Don't error out if something "bad" happens when trying to bind a driver to a device. We want the sysfs attributes to be present for later when we try to tear down the device. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] driver core: fix error handling in bus_add_deviceHannes Reinecke
The error handling in bus_add_device() and device_attach() is simply non-existing. This patch propagates any error from device_attach to the upper layers to allow for a proper recovery. From: Hannes Reinecke <hare@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Fix up bus code and remove use of rwsem.mochel@digitalimplant.org
- Don't add devices to bus's embedded kset, since it's not used by anyone anymore. - Don't need to take the bus rwsem when calling {device,driver}_attach(), since those functions use the klists and the klists' spinlocks. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Add a klist to struct bus_type for its drivers.mochel@digitalimplant.org
- Use it in bus_for_each_drv(). - Use the klist spinlock instead of the bus rwsem. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Add a klist to struct bus_type for its devices.mochel@digitalimplant.org
- Use it for bus_for_each_dev(). - Use the klist spinlock instead of the bus rwsem. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Move device/driver code to drivers/base/dd.cmochel@digitalimplant.org
This relocates the driver binding/unbinding code to drivers/base/dd.c. This is done for two reasons: One, it's not code related to the bus_type itself; it uses some from that, some from devices, and some from drivers. And Two, it will make it easier to do some of the upcoming lock removal on that code.. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Add a semaphore to struct device to synchronize calls to its driver.mochel@digitalimplant.org
This adds a per-device semaphore that is taken before every call from the core to a driver method. This prevents e.g. simultaneous calls to the ->suspend() or ->resume() and ->probe() or ->release(), potentially saving a whole lot of headaches. It also moves us a step closer to removing the bus rwsem, since it protects the fields in struct device that are modified by the core. Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] sysfs: (driver/base) if show/store is missing return -EIODmitry Torokhov
sysfs: fix drivers/base so if an attribute doesn't implement show or store method read/write will return -EIO instead of 0. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] Driver Core: remove driver model detach_stateDavid Brownell
The driver model has a "detach_state" mechanism that: - Has never been used by any in-kernel drive; - Is superfluous, since driver remove() methods can do the same thing; - Became buggy when the suspend() parameter changed semantics and type; - Could self-deadlock when called from certain suspend contexts; - Is effectively wasted documentation, object code, and headspace. This removes that "detach_state" mechanism; net code shrink, as well as a per-device saving in the driver model and sysfs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-04[PATCH] drivers/base/bus.c: fix iteration in driver_detach()Roman Kagan
With 2.6.11 and 2.6.12-rc2 (and perhaps a few versions before) usb drivers for multi-interface devices, which do usb_driver_release_interface() in their disconnect(), make rmmod hang. It turns out to be due to a bug in drivers/base/bus.c:driver_detach(), that iterates over the list of attached devices with list_for_each_safe() under an assumption that device_release_driver() only releases the current device, while it may also call device_release_driver() for other devices on the same list. The following patch fixes it. Please consider applying. Signed-off-by: Roman Kagan <rkagan@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!