aboutsummaryrefslogtreecommitdiff
path: root/drivers/base/power/main.c
AgeCommit message (Collapse)Author
2009-03-30PM: Rework handling of interrupts during suspend-resumeRafael J. Wysocki
Use the functions introduced in by the previous patch, suspend_device_irqs(), resume_device_irqs() and check_wakeup_irqs(), to rework the handling of interrupts during suspend (hibernation) and resume. Namely, interrupts will only be disabled on the CPU right before suspending sysdevs, while device drivers will be prevented from receiving interrupts, with the help of the new helper function, before their "late" suspend callbacks run (and analogously during resume). In addition, since the device interrups are now disabled before the CPU has turned all interrupts off and the CPU will ACK the interrupts setting the IRQ_PENDING bit for them, check in sysdev_suspend() if any wake-up interrupts are pending and abort suspend if that's the case. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-24Driver core: Fix device_move() vs. dpm list ordering, v2Cornelia Huck
dpm_list currently relies on the fact that child devices will be registered after their parents to get a correct suspend order. Using device_move() however destroys this assumption, as an already registered device may be moved under a newly registered one. This patch adds a new argument to device_move(), allowing callers to specify how dpm_list should be adapted. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-22PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki
Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06driver core: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06PM: Simplify the new suspend/hibernation framework for devicesRafael J. Wysocki
PM: Simplify the new suspend/hibernation framework for devices Following the discussion at the Kernel Summit, simplify the new device PM framework by merging 'struct pm_ops' and 'struct pm_ext_ops' and removing pointers to 'struct pm_ext_ops' from 'struct platform_driver' and 'struct pci_driver'. After this change, the suspend/hibernation callbacks will only reside in 'struct device_driver' as well as at the bus type/ device class/device type level. Accordingly, PCI and platform device drivers are now expected to put their suspend/hibernation callbacks into the 'struct device_driver' embedded in 'struct pci_driver' or 'struct platform_driver', respectively. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16vsprintf: use new vsprintf symbolic function pointer formatBjorn Helgaas
Use the '%pF' format to get rid of an "#ifdef DEBUG" and make some printks atomic. This removes the last in-tree uses of print_fn_descriptor_symbol(). I marked print_fn_descriptor_symbol() deprecated and scheduled it for removal next year to give time for out-of-tree modules to be updated. parisc's print_fn_descriptor_symbol() is currently broken there (it needs to dereference the function pointer similar to ia64 and power). This patch shouldn't make anything worse, but it means we need to fix dereference_function_descriptor() instead of print_fn_descriptor_symbol() to get meaningful initcall_debug output. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16debug: use dev_WARN() rather than WARN_ON() in device_pm_add()Arjan van de Ven
device_pm_add() has a WARN_ON that is showing relatively high on kerneloops.org, but unfortunately the WARN_ON is less than useful in that it doesn't print any information about what device is causing the issue. This patch fixes this by turning the WARN_ON() into the newly introduces dev_WARN() which will print information about the device in question. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21PM: Remove WARN_ON from device_pm_addRafael J. Wysocki
PM: Remove WARN_ON from device_pm_add Fix message in device_pm_add() saying that the device will not be added to dpm_list, although in fact the device is going to be added to the list regardless of the ordering violation. Remove the WARN_ON(true) triggered in that situation, because it is hit by USB very often and spams the users' logs. This patch fixes bug #11263 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21PM: don't skip device PM init when CONFIG_PM_SLEEP isn't set and CONFIG_PM ↵Alan Stern
is set This patch (as1124) fixes a couple of bugs in the PM core. The new dev->power.status field should be initialized regardless of whether CONFIG_PM_SLEEP is enabled, and similarly dpm_sysfs_add() should be called whenever CONFIG_PM is enabled. The patch separates out the call to dpm_sysfs_add() from the call to device_pm_add(). As a result device_pm_add() can no longer return an error, so its return type is changed to void. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Romit Dasgupta <romit@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-12Suspend-related patches for 2.6.27Rafael J. Wysocki
ACPI PM: Add possibility to change suspend sequence There are some systems out there that don't work correctly with our current suspend/hibernation code ordering. Provide a workaround for these systems allowing them to pass 'acpi_sleep=old_ordering' in the kernel command line so that it will use the pre-ACPI 2.0 ("old") suspend code ordering. Unfortunately, this requires us to add a platform hook to the resuming of devices for recovering the platform in case one of the device drivers' .suspend() routines returns error code. Namely, ACPI 1.0 specifies that _PTS should be called before suspending devices, but _WAK still should be called before resuming them in order to undo the changes made by _PTS. However, if there is an error during suspending devices, they are automatically resumed without returning control to the PM core, so the _WAK has to be called from within device_resume() in that cases. The patch also reorders and refactors the ACPI suspend/hibernation code to avoid duplication as far as reasonably possible. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10Introduce new top level suspend and hibernation callbacksRafael J. Wysocki
Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-15Clean up 'print_fn_descriptor_symbol()' typesLinus Torvalds
Everybody wants to pass it a function pointer, and in fact, that is what you _must_ pass it for it to make sense (since it knows that ia64 and ppc64 use descriptors for function pointers and fetches the actual address from there). So don't make the argument be a 'unsigned long' and force everybody to add a cast. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-22Relax check on adding children of suspended devicesRafael J. Wysocki
Do not refuse to actually register children of suspended devices, but still warn about attempts to do that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19PM: Remove destroy_suspended_device()Rafael J. Wysocki
After 2.6.24 there was a plan to make the PM core acquire all device semaphores during a suspend/hibernation to protect itself from concurrent operations involving device objects. That proved to be too heavy-handed and we found a better way to achieve the goal, but before it happened, we had introduced the functions device_pm_schedule_removal() and destroy_suspended_device() to allow drivers to "safely" destroy a suspended device and we had adapted some drivers to use them. Now that these functions are no longer necessary, it seems reasonable to remove them and modify their users to use the normal device unregistration instead. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19PM: Make wakeup flags available whenever CONFIG_PM is setAlan Stern
The various wakeup flags and their accessor macros in struct dev_pm_info should be available whenever CONFIG_PM is enabled, not just when CONFIG_PM_SLEEP is on. Otherwise remote wakeup won't always be configurable for runtime power management. This patch (as1056b) fixes the oversight. David Brownell adds: More accurately, fixes the "regression" ... as noted sometime last summer, after 296699de6bdc717189a331ab6bbe90e05c94db06 introduced CONFIG_SUSPEND. But that didn't make the regression list for that kernel, ergo the delay in fixing it. [rjw: rebased] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19Driver core: Call device_pm_add() after bus_add_device() in device_add()Rafael J. Wysocki
Include dpm_sysfs_add() into device_pm_add(), in analogy with device_pm_remove(), and modify device_add() to call the latter after bus_add_device(), to avoid situations in which the PM core may attempt to suspend a device the registration of which has not been successful. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19PM: Handle device registrations during suspend/resumeRafael J. Wysocki
Modify the PM core to protect its data structures, specifically the dpm_active list, from being corrupted if a child of the currently suspending device is registered concurrently with its ->suspend() callback. In that case, since the new device (the child) is added to dpm_active after its parent, the PM core will attempt to suspend it after the parent, which is wrong. Introduce a new member of struct dev_pm_info, called 'sleeping', and use it to check if the parent of the device being added to dpm_active has been suspended, in which case the device registration fails. Also, use 'sleeping' for checking if the ordering of devices on dpm_active is correct. Introduce variable 'all_sleeping' that will be set to 'true' once all devices have been suspended and make new device registrations fail until 'all_sleeping' is reset to 'false', in order to avoid having unsuspended devices around while the system is going into a sleep state. Remove pm_sleep_rwsem which is not necessary any more. Special thanks to Alan Stern for discussions and suggestions that lead to the creation of this patch. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19power_state: remove it from driver corePavel Machek
power_state is scheduled for removal, and it is used only for debug prints by driver core. Remove it. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PM: fix new mutex-locking bug in the PM coreAlan Stern
This patch (as1041) fixes a bug introduced by the acquire-all-device-semaphores reversion. The error pathway of dpm_suspend() fails to reacquire a mutex it should be holding. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04PM: Do not acquire device semaphores upfront during suspendRafael J. Wysocki
Remove the code that acquires all device semaphores from the suspend code path as it causes multiple problems to appear (most notably, http://bugzilla.kernel.org/show_bug.cgi?id=10030) and revert the change introduced by commit 4145ed6dc597a9bea5f6ae8c574653b2de10620f depending on the code being removed. Remove pm_sleep_lock()/pm_sleep_unlock() from device_add() to avoid the issue reported at http://bugzilla.kernel.org/show_bug.cgi?id=9874. It should fix the regreesions reported at: http://bugzilla.kernel.org/show_bug.cgi?id=9874 http://bugzilla.kernel.org/show_bug.cgi?id=10030 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (26 commits) PM: Make suspend_device() static PCI ACPI: Fix comment describing acpi_pci_choose_state Hibernation: Handle DEBUG_PAGEALLOC on x86 ACPI: fix build warning ACPI: TSC breaks atkbd suspend ACPI: remove is_processor_present prototype acer-wmi: Add DMI match for mail LED on Acer TravelMate 4200 series ACPI: sparse fix, replace macro with static function ACPI: thinkpad-acpi: add tablet-mode reporting ACPI: thinkpad-acpi: minor hotkey_radio_sw fixes ACPI: thinkpad-acpi: improve thinkpad-acpi input device documentation ACPI: thinkpad-acpi: issue input events for tablet swivel events ACPI: thinkpad-acpi: make the video output feature optional ACPI: thinkpad-acpi: synchronize input device switches ACPI: thinkpad-acpi: always track input device open/close ACPI: thinkpad-acpi: trivial fix to documentation ACPI: thinkpad-acpi: trivial fix to module_desc typo intel_menlo: extract return values using PTR_ERR ACPI video: check for error from thermal_cooling_device_register ACPI thermal: extract return values using PTR_ERR ...
2008-02-21PM: Remove unbalanced mutex_unlock() from dpm_resume()Rafael J. Wysocki
Remove an unnecessary unlocking of dpm_list_mtx in the error path in drivers/base/power/main.c:dpm_suspend() . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21driver-core: fix kernel-doc function parametersRandy Dunlap
Fix drivers/base/ missing kernel-doc parameters: Warning(linux-2.6.24-git12//drivers/base/driver.c:133): No description found for parameter 'drv' Warning(linux-2.6.24-git12//drivers/base/driver.c:133): No description found for parameter 'kobj' Warning(linux-2.6.24-git12//drivers/base/driver.c:133): No description found for parameter 'fmt' Warning(linux-2.6.24-git12//drivers/base/power/main.c:530): No description found for parameter 'state' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21PM: Make suspend_device() staticAdrian Bunk
suspend_device() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-02PM: Export device_pm_schedule_removalRafael J. Wysocki
Move the declaration of device_pm_schedule_removal() to device.h and make it exported, as it will be used directly by some drivers for unregistering device objects during suspend/resume cycles in a safe way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24PM: Acquire device locks on suspendRafael J. Wysocki
This patch reorganizes the way suspend and resume notifications are sent to drivers. The major changes are that now the PM core acquires every device semaphore before calling the methods, and calls to device_add() during suspends will fail, while calls to device_del() during suspends will block. It also provides a way to safely remove a suspended device with the help of the PM core, by using the device_pm_schedule_removal() callback introduced specifically for this purpose, and updates two drivers (msr and cpuid) that need to use it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28create /sys/.../power when CONFIG_PM is setDaniel Drake
The CONFIG_SUSPEND changes in 2.6.23 caused a regression under certain configuration conditions (SUSPEND=n, USB_AUTOSUSPEND=y) where all USB device attributes in sysfs (idVendor, idProduct, ...) silently disappeared, causing udev breakage and more. The cause of this is that the /sys/.../power subdirectory is now only created when CONFIG_PM_SLEEP is set, however, it should be created whenever CONFIG_PM is set to handle the above situation. The following patch fixes the regression. Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12PM: merge device power-management source filesAlan Stern
This patch (as993) merges the suspend.c and resume.c files in drivers/base/power into main.c, making some public symbols private. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11PM: Remove pm_parent from struct dev_pm_infoRafael J. Wysocki
The pm_parent member of struct dev_pm_info (defined in include/linux/pm.h) is only used to check if the device's parent is in the right state while the device is being suspended or resumed. However, this can be done just as well with the help of the parent pointer in struct device, so pm_parent can be removed along with some code that handles it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11Power Management: use mutexes instead of semaphoresMatthias Kaehlcke
The Power Management code uses semaphores as mutexes. Use the mutex API instead of the (binary) semaphores. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27define platform wakeup hook, use in pci_enable_wake()David Brownell
This defines a platform hook to enable/disable a device as a wakeup event source. It's initially for use with ACPI, but more generally it could be used whenever enable_irq_wake()/disable_irq_wake() don't suffice. The hook is called -- if available -- inside pci_enable_wake(); and the semantics of that call are enhanced so that support for PCI PME# is no longer needed. It can now work for devices with "legacy PCI PM", when platform support allows it. (That support would use some board-specific signal for for the same purpose as PME#.) [akpm@linux-foundation.org: Make it compile with CONFIG_PM=n] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-11[PATCH] PM: use kobject_name() to access kobject namesDmitry Torokhov
Noone should use kobj.name directly since it may contain garbage. Objects with longer names have them stored in separately allocated memory pointed to by kobj->k_name. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-10-28[PATCH] one less word in struct deviceDavid Brownell
This saves a word from "struct device" ... there's a refcounting mechanism stub that's rather ineffective (the values are never even tested!), which can safely be deleted. With this patch it uses normal device refcounting, so any potential users of the pm_parent mechanism will be more correct. (That mechanism is actually unusable for now though; it does nothing.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/main.c | 26 +++----------------------- include/linux/pm.h | 1 - 2 files changed, 3 insertions(+), 24 deletions(-)
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!