| Age | Commit message (Collapse) | Author |
|---|
|
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
[SCSI] Remove full sg table memset()
[SCSI] ide-scsi: remove usage of sg_last()
Fix loop terminating conditions in fill_sg().
[BLOCK] Clear sg entry before filling in blk_rq_map_sg()
IA64: iommu uses sg_next with an invalid sg element
cciss: disable DMA refetch on Smart Array P600
swiotlb: fix map_sg failure handling
SPARC64: fix iommu sg chaining
[SCSI] ide-scsi: use scsi_sg_count() instead of ->use_sg
|
|
The Coverity checker spotted that we have already oops'ed if "disk"
was NULL.
Since "disk" being NULL seems impossible at this point this patch
removes the NULL check.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This fixes a problem with the way cciss was filling out the "errors" field
of the request structure upon completion of requests. Previously, it just
put a 1 or a 0 in there and used the negation of this as the uptodate
parameter to one of the functions in the block layer, being a block device.
For the SG_IO ioctl, this was not sufficient, and we noticed that, for
example, sg_turs from sg3_utils did not correctly detect problems due to
cciss having set rq->errors incorrectly.
Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch disables DMA refetch in the PCI bridge. We have disabled DMA
prefetch for quite some time. Testing with XEN revealed another ASIC bug. If
dom0 resides on a P600 the board can can an MCA bi accessing invalid memory
addresses. Apparently, we need to disable both prefetch and refetch.
My understanding is a refetch operation should not occur but it is a valid
thing to do if prefetched data is no longer available for whatever reason.
Please consider this patch for inclusion.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
--------------------------------------------------------------------------------
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
|
|
New scatter/gather list chaining [sg_next()] treats 'page' member of
struct scatterlist with low bit set [0x01] as a chain pointer to
another struct scatterlist [array]. The CCISS driver request function
passes an uninitialized, temporary, on-stack scatterlist array to
blk_rq_map_sq(). sg_next() interprets random data on the stack as a
chain pointer and eventually tries to de-reference an invalid pointer,
resulting in:
[<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170
PGD 6090c3067 PUD 0
Oops: 0000 [1] SMP
last sysfs file: /block/cciss!c0d0/cciss!c0d0p1/dev
CPU 6
Modules linked in: ehci_hcd ohci_hcd uhci_hcd
Pid: 1, comm: init Not tainted 2.6.23-rc6-mm1 #3
RIP: 0010:[<ffffffff8031dd70>] [<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170
RSP: 0018:ffff81060901f768 EFLAGS: 00010206
RAX: 000000040b161000 RBX: ffff81060901f7d8 RCX: 000000040b162c00
RDX: 0000000000000000 RSI: ffff81060b13a260 RDI: ffff81060b139600
RBP: 0000000000001400 R08: 00000000fffffffe R09: 0000000000000400
R10: 0000000000000000 R11: 000000040b163000 R12: ffff810102fe0000
R13: 0000000000000001 R14: 0000000000000001 R15: 00001e0000000000
FS: 00000000026108f0(0063) GS:ffff810409000b80(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000010000001e CR3: 00000006090c6000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process init (pid: 1, threadinfo ffff81060901e000, task ffff810409020800)
last branch before last exception/interrupt
from [<ffffffff8031de0a>] blk_rq_map_sg+0x10a/0x170
to [<ffffffff8031dd70>] blk_rq_map_sg+0x70/0x170
Stack: 000000018068ea00 ffff810102fe0000 0000000000000000 ffff810011400000
0000000000000002 0000000000000000 ffff81040b172000 ffffffff803acd3d
0000000000003ec1 ffff8106090d5000 ffff8106090d5000 ffff810102fe0000
Call Trace:
[<ffffffff803acd3d>] do_cciss_request+0x15d/0x4c0
[<ffffffff80298968>] new_slab+0x1c8/0x270
[<ffffffff80298ffd>] __slab_alloc+0x22d/0x470
[<ffffffff8027327b>] mempool_alloc+0x4b/0x130
[<ffffffff8032b21e>] cfq_set_request+0xee/0x380
[<ffffffff8027327b>] mempool_alloc+0x4b/0x130
[<ffffffff8031ff98>] get_request+0x168/0x360
[<ffffffff80331b0d>] rb_insert_color+0x8d/0x110
[<ffffffff8031cfd8>] elv_rb_add+0x58/0x60
[<ffffffff8032a329>] cfq_add_rq_rb+0x69/0xa0
[<ffffffff8031c1ab>] elv_merged_request+0x5b/0x60
[<ffffffff803224fd>] __make_request+0x23d/0x650
[<ffffffff80298ffd>] __slab_alloc+0x22d/0x470
[<ffffffff80270000>] generic_write_checks+0x140/0x190
[<ffffffff8031f012>] generic_make_request+0x1c2/0x3a0
<etc>
Kernel panic - not syncing: Attempted to kill init!
This patch initializes the tmp_sg array to zeroes. Perhaps not the ultimate
fix, but an effective work-around. I can now boot 23-rc6-mm1 on an HP
Proliant x86_64 with CCISS boot disk.
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
drivers/block/cciss.c | 1 +
1 file changed, 1 insertion(+)
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
The recent bio work and subsequent fixups created unused variables.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As bi_end_io is only called once when the reqeust is complete,
the 'size' argument is now redundant. Remove it.
Now there is no need for bio_endio to subtract the size completed
from bi_size. So don't do that either.
While we are at it, change bi_end_io to return void.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
drivers/block/cciss.c | 104285 -> 104168 (-117 bytes)
drivers/block/cciss.o | 277400 -> 277124 (-276 bytes)
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
There's a memory leak in the cciss driver.
in alloc_cciss_hba() we may leak sizeof(ctlr_info_t) bytes if a
call to alloc_disk(1 << NWD_SHIFT) fails.
This patch should fix the issue.
Spotted by the Coverity checker.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This corrects the following compile error introduced by the merge of the
new bsg layer in commit e245befce7af0a1e1347079ed62695b059594bd4:
caglar@zangetsu linux-2.6 $ make
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
LD drivers/block/built-in.o
CC [M] drivers/block/cciss.o
drivers/block/cciss.c: In function `cciss_ioctl':
drivers/block/cciss.c:1173: warning: passing arg 2 of `scsi_cmd_ioctl' from incompatible pointer type
drivers/block/cciss.c:1173: warning: passing arg 3 of `scsi_cmd_ioctl' makes pointer from integer without a cast
drivers/block/cciss.c:1173: warning: passing arg 4 of `scsi_cmd_ioctl' makes integer from pointer without a cast
drivers/block/cciss.c:1173: error: too few arguments to function `scsi_cmd_ioctl'
...
make[2]: *** [drivers/block/cciss.o] Hata 1
make[1]: *** [drivers/block] Hata 2
make: *** [drivers] Hata 2
Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds support for the Smart Array P700m SAS controller. This new
controller will ship Fall 2007.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Fix an Oops in the cciss driver caused by system shutdown while a filesystem
on a cciss device is still active. The cciss_remove_one function only
properly removes the device if the device has been cleanly released by its
users, which is not the case when the pci_driver.shutdown method is called.
This patch adds a new cciss_shutdown function to better match the pattern
used by various SCSI drivers: deactivate device interrupts and flush caches.
It also alters the cciss_remove_one function to match and readds the
__devexit annotation that was removed when cciss_remove_one was serving as
the pci_driver.shutdown method.
Signed-off-by: Gerald Britton <gbritton@alum.mit.edu>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make cciss unconditionally include scsi/scsi.h, because of the use of
SCSI_IOCTL_GET_IDLUN and SCSI_IOCTL_GET_BUS_NUMBER.
Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Set rq->errors more correctly in cciss driver. Previously we had set it
synonymously with the meaning of the last parameter of end_that_last_request
and complete_buffers (the "uptodate" parameter) and had gotten away with it
for all this time because nobody ever looked at rq->errors.
SCSI_IOCTL_SEND_COMMAND looks at rq->errors, so now it matters that it be
right.
Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For all of you that think cciss should be a scsi driver here is the patch that
you have been waiting for all these years. This patch actually adds the SG_IO
ioctl to cciss. The primary purpose is for clustering and high-availibilty.
But now anyone can exploit this ioctl in any manner they wish.
Note, SCSI_IOCTL_SEND_COMMAND doesn't work with this patch due to rq->errors
being set incorrectly. Subsequent patch fixes that.
Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reformat some error handling code to reduce line lengths a bit.
Signed-off-by: Stephen M. Cameron <steve.cameron@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We must unregister from SCSI before we unmap device resources and unhook
the IRQ handler. Otherwise, SCSI may send us more requests, and we won't
be able to handle them.
I see the following oops during every reboot of my HP DL360:
...
Unmounting local filesystems...done.
Rebooting... Completed flushing cache on controller 0
BUG: unable to handle kernel paging request at virtual address f8808040
printing eip:
c02dc72b
*pde = 02120067
*pte = 00000000
Oops: 0002 [#1]
SMP
Modules linked in:
CPU: 1
EIP: 0060:[<c02dc72b>] Not tainted VLI
EFLAGS: 00010046 (2.6.21-rc6 #1)
EIP is at SA5_submit_command+0xb/0x20
eax: f8808000 ebx: f7a00000 ecx: f79f0000 edx: 37a00000
esi: f79f0000 edi: 00000000 ebp: 00000000 esp: dd717a44
ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068
Process khelper (pid: 1427, ti=dd716000 task=c2260a70 task.ti=dd716000)
Stack: c02df2c0 f7a00000 f7a00000 00d41008 c02df691 00000000 00000010 00000002
00000001 f79f0000 f7fff844 c1398420 00000000 00000000 00001000 230a3020
69666564 5420656e 50434f49 465f544b 4853554c 44414552 0a312009 66656423
Call Trace:
[<c02df2c0>] start_io+0x80/0x120
[<c02df691>] do_cciss_request+0x331/0x350
[<c014242a>] mempool_alloc+0x2a/0xe0
[<c020ad71>] blk_alloc_request+0x61/0x80
[<c020b02e>] get_request+0x15e/0x1e0
[<c01595e0>] cache_alloc_refill+0xb0/0x1e0
[<c021049d>] as_update_rq+0x2d/0x80
[<c0210d28>] as_add_request+0x68/0x90
[<c0207f99>] elv_insert+0x119/0x160
[<c020bd0b>] __make_request+0xcb/0x320
[<c0122ee0>] lock_timer_base+0x20/0x50
[<c0123096>] del_timer+0x56/0x60
[<c020a7b8>] blk_remove_plug+0x38/0x70
[<c020a815>] __generic_unplug_device+0x25/0x30
[<c020a835>] generic_unplug_device+0x15/0x30
...
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds initialization of drv->cylinders back into the failing case in
cciss_geometry_inquiry. I inadvertently removed it in one my 2TB updates.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds support for the struct pci_driver shutdown method to cciss.
We require notification of an impending reboot or shutdown so that we can
flush the battery backed write cache (BBWC) on the Smart Array controller.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch changes the way we determine if a logical volume is larger than
2TB.
The original test looked for a total_size of 0. Originally we added 1 to the
total_size. That would make our read_capacity return size 0 for >2TB lv's.
We assumed that we could not have a lv size of 0 so it seemed OK until we were
in a clustered system. The backup node would see a size of 0 due to the
reservation on the drive. That caused the driver to switch to 16-byte CDB's
which are not supported on older controllers. After that everything was
broken.
It may seem petty but I don't see the value in trying to determine if the LBA
is beyond the 2TB boundary. That's why when we switch we use 16-byte CDB's
for all read/write operations. Please consider this for inclusion.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the
CONFIG_PROC_FS block.
drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch fixes a stupid bug. Sometime during the 2tb enhancement I ended up
replacing the macros XFER_READ and XFER_WRITE with h->cciss_read and
h->cciss_write respectively. It seemed to work somehow at least on x86_64 and
ia64. I don't know how. But people started complaining about command timeouts
on older controllers like the 64xx series and only on ia32. This resolves the
issue reproduced in our lab. Please consider this for inclusion.
Thanks,
mikem
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This patch sets a default raid level on a volume that either does not support
reading the geometry or reports an invalid geometry for whatever reason. We
were always setting some values for heads and sectors but never set a raid
level. This caused lots of problems on some buggy firmware. Please consider
this for inclusion.
Thanks,
mikem
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] Fixup cciss error handling
[PATCH] Allow as-iosched to be unloaded
[PATCH 2/2] cciss: remove calls to pci_disable_device
[PATCH 1/2] cciss: map out more memory for config table
[PATCH] Propagate down request sync flag
Resolve trivial whitespace conflict in drivers/block/cciss.c manually.
|
|
Run this:
#!/bin/sh
for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do
echo "De-casting $f..."
perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f
done
And then go through and reinstate those cases where code is casting pointers
to non-pointers.
And then drop a few hunks which conflicted with outstanding work.
Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Karsten Keil <kkeil@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Steven French <sfrench@us.ibm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Remove calls to pci_disable_device except in fail_all_cmds. The
pci_disable_device function does something nasty to Smart Array controllers
that pci_enable_device does not undo. So if the driver is unloaded it
cannot be reloaded.
Also, customers can disable any pci device via the ROM Based Setup Utility
(RBSU). If the customer has disabled the controller we should not try to
blindly enable the card from the driver. Please consider this for
inclusion.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Map out more memory for our config table. It's required to reach offset
0x214 to disable DMA on the P600. I'm not sure how I lost this hunk.
Please consider this for inclusion.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The previous cciss commit removed the err_out_disable_pdev label, but
there was still a user of that. Fix that up.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This patch removes calls to pci_disable_device except in fail_all_cmds. The
pci_disable_device function does something nasty to Smart Array controllers
that pci_enable_device does not undo. So if the driver is unloaded it cannot be
reloaded.
Also, customers can disable any pci device via the ROM Based Setup Utility
(RBSU). If the customer has disabled the controller we should not try to
blindly enable the card from the driver. Please consider this for inclusion.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
This patch maps out more memory for our config table. It's required to reach
offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk.
Please consider this for inclusion.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
A pretty simple cleanup for cciss_interrupt_mode.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add the support for a large number of logical volumes. We will soon have
hardware that support up to 1024 logical volumes.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Remove the no longer used revalidate_allvol function. It was replaced by
rebuild_lun_table.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change our open to test for drv->heads like we do in other places in the
driver. Mostly for consistency.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change the blk_queue_max_sectors from 512 to 2048. This helps increase
performance.
[akpm@osdl.org: s/sector_size/max_sectors/]
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Unconditionally disable DMA prefetch on the P600 controller. An ASIC bug may
result in prefetching beyond the end of physical memory.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change the SSID on the E500 as a workaround for a firmware bug. It looks like
the original patch was backed out between rc2 and rc4.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds. Most Smart Array
controllers can support up to 1024 commands but the E200 family can only
support 128. To prevent annoying "fifo full" messages we define nr_cmds on a
per controller basis by adding it the product table.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add the support to fire up on any HP RAID class device that has a valid cciss
signature.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change the cciss version number to 3.6.14 to reflect the following
functionality changes added by the rest of the set. They include:
- Support to fire up on any HP RAID class controller
- Increase nr_cmds to 512 for most controllers by adding it to the product table
- PCI subsystem ID fix fix was pulled
- Disable DMA prefetch for the P600 on IPF platforms
- Change from 512 to 2048 sector_size for performance
- Fix in cciss_open for consistency
- Remove the no longer used revalidate_allvol function
- Bug fix for busy configuring
- Support for more than 16 logical volumes
- Cleanups in cciss_interrupt_mode
- Fix for iostats, it's been broken for several kernel releases
Signed-off-by: Mike Miller <mike.miller@hp.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
cciss needs to call disk_stat_add() for iostat to work.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix printk format warnings:
drivers/block/cciss.c:2000: warning: long long int format, long unsigned int arg (arg 2)
drivers/block/cciss.c:2035: warning: long long int format, long unsigned int arg (arg 2)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
CCISS was producing warnings about shifts being greater than the size of
the type and pointers being of incompatible type. Turns out this is
because it's calling do_div on a 32-bit quantity. Upon further
investigation, the sector_t total_size is being assigned to an int, and
then we're calling do_div on that int. Obviously, sector_div is called for
here, and I took the chance to refactor the code a little.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
|
|
kbuild explicitly includes this at build time.
Signed-off-by: Dave Jones <davej@redhat.com>
|
