aboutsummaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2009-06-16Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove some includings of blktrace_api.h mg_disk: seperate mg_disk.h again block: Introduce helper to reset queue limits to default values cfq: remove extraneous '\n' in blktrace output ubifs: register backing_dev_info btrfs: properly register fs backing device block: don't overwrite bdi->state after bdi_init() has been run cfq: cleanup for last_end_request in cfq_data
2009-06-16Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (38 commits) ps3flash: Always read chunks of 256 KiB, and cache them ps3flash: Cache the last accessed FLASH chunk ps3: Replace direct file operations by callback ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL() ps3: Correct debug message in dma_ioc0_map_pages() drivers/ps3: Add missing annotations ps3fb: Use ps3_system_bus_[gs]et_drvdata() instead of direct access ps3flash: Use ps3_system_bus_[gs]et_drvdata() instead of direct access ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdata ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devices block/ps3: remove driver_data direct access of struct device ps3vram: Make ps3vram_priv.reports a void * ps3vram: Remove no longer used ps3vram_priv.ddr_base ps3vram: Replace mutex by spinlock + bio_list block: Add bio_list_peek() powerpc: Use generic atomic64_t implementation on 32-bit processors lib: Provide generic atomic64_t implementation powerpc: Add compiler memory barrier to mtmsr macro powerpc/iseries: Mark signal_vsp_instruction() as maybe unused powerpc/iseries: Fix unused function warning in iSeries DT code ...
2009-06-16block: remove some includings of blktrace_api.hLi Zefan
When porting blktrace to tracepoints, we changed to trace/block.h for trace prober declarations. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16mg_disk: seperate mg_disk.h againunsik Kim
eec9462088a26c046d4db3100796a340a50890b8 fold mg_disk.h into mg_disk.c, but mg_disk platform driver needs private data for operation. This also make mg_disk.c as machine independent. Seperate only needed structure and defines to mg_disk.h Signed-off-by: unsik Kim <donari75@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-15ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdataGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Jim Paris <jim@jtan.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15block/ps3: remove driver_data direct access of struct deviceRoel Kluin
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. [Geert: Use ps3_system_bus_[gs]et_driver_data() for ps3_system_bus_device] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3vram: Make ps3vram_priv.reports a void *Geert Uytterhoeven
So we can kill a cast. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3vram: Remove no longer used ps3vram_priv.ddr_baseGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3vram: Replace mutex by spinlock + bio_listGeert Uytterhoeven
Remove the mutex serializing access to the cache. Instead, queue up new requests on a bio_list if the driver is busy. This improves sequential write performance by ca. 2%. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3fb/vram: Extract common GPU stuff into <asm/ps3gpu.h>Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: linux-fbdev-devel@lists.sourceforge.net Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3vram: GPU memory mapping cleanupGeert Uytterhoeven
- Make the IOMMU flags used for mapping main memory into the GPU's I/O space explicit, instead of relying on the default in the hypervisor, - Add missing calls to lv1_gpu_context_iomap(..., CBE_IOPTE_M) to unmap the memory during cleanup. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3vram: Correct exchanged gotos in ps3vram_probe() error pathJim Paris
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3vram: Use proc_create_data() instead of proc_create()Geert Uytterhoeven
Use proc_create_data() to avoid race conditions. Reported-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15ps3vram: Fix error path (return -EIO) for short read/writeGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jim Paris <jim@jtan.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-12Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits) microblaze: Don't use access_ok for unaligned microblaze: remove unused flat_stack_align() definition microblaze: Fix problem with early_printk in startup microblaze_mmu_v2: Makefiles microblaze_mmu_v2: Kconfig update microblaze_mmu_v2: stat.h MMU update microblaze_mmu_v2: Elf update microblaze_mmu_v2: Update dma.h for MMU microblaze_mmu_v2: Update cacheflush.h microblaze_mmu_v2: Update signal returning address microblaze_mmu_v2: Traps MMU update microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU microblaze_mmu_v2: Update linker script for MMU microblaze_mmu_v2: Add MMU related exceptions handling microblaze_mmu_v2: uaccess MMU update microblaze_mmu_v2: Update exception handling - MMU exception microblaze_mmu_v2: entry.S, entry.h microblaze_mmu_v2: Add CURRENT_TASK for entry.S microblaze_mmu_v2: MMU asm offset update microblaze_mmu_v2: Update tlb.h and tlbflush.h ...
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12virtio_blk: add missing __dev{init,exit} markingsMike Frysinger
The remove member of the virtio_driver structure uses __devexit_p(), so the remove function itself should be marked with __devexit. And where there be __devexit on the remove, so is there __devinit on the probe. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-12virtio: find_vqs/del_vqs virtio operationsMichael S. Tsirkin
This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations, and updates all drivers. This is needed for MSI support, because MSI needs to know the total number of vectors upfront. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ lguest/9p compile fixes)
2009-06-12virtio: add names to virtqueue struct, mapping from devices to queues.Rusty Russell
Add a linked list of all virtqueues for a virtio device: this helps for debugging and is also needed for upcoming interface change. Also, add a "name" field for clearer debug messages. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-06-10floppy: fix hibernationOndrej Zary
Based on Ingo Molnar's patch from 2006, this makes the floppy work after resume from hibernation, at least on my machine. This fix resets the floppy controller on resume. It was experimentally determined to bring the controller back to life - we don't really know why it works. floppy_init() does the same thing at boot/modprobe time. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-10ramdisk: remove long-deprecated "ramdisk=" boot-time parameterRobert P. J. Day
The "ramdisk" parameter was removed from the defunct rd.c file quite some time ago, in favour of the more specific "ramdisk_size" parameter so, for consistency, the same should be done here. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09Add serial number support for virtio_blk, V4ajohn cooper
This patch extracts the opaque data from pci i/o region 0 via the added VIRTIO_BLK_F_IDENTIFY field. By convention this data takes the form of that returned by an ATA IDENTIFY DEVICE command, however the driver (except for structure size) makes no interpretation of the data. The structure data is copied wholesale to userspace via a HDIO_GET_IDENTITY ioctl command (eg: hdparm -i <dev>). Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: decode unit attention in SCSI error handling codescameron@beardog.cca.cpqcorp.net
Make SCSI reset error handler decode unit attention ASC and after a target reset wait for a unit attention that indicates a reset occurred rather than just for any old unit attention. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: Remove no longer needed sendcmd reject processing codescameron@beardog.cca.cpqcorp.net
Now that the cciss SCSI error handling routines operate with interrupts enabled, we no longer need to maintain the list of command completions that sendcmd() might inadvertantly scoop up, since now it only runs at driver init time, and there won't be any other commands for it to scoop up. So we can remove that list and the code that adds to it and processes it. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: change SCSI error handling routines to work with interrupts enabled.scameron@beardog.cca.cpqcorp.net
Change cciss scsi error handling routines to work with interrupts enabled. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: separate error processing and command retrying code in ↵scameron@beardog.cca.cpqcorp.net
sendcmd_withirq_core() Separate the error processing from sendcmd_withirq_core from the code which retries commands. The rationale for this is that the SCSI error handling code can then be made to use sendcmd_withirq_core, but avoid retrying commands. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: factor out fix target status processing code from sendcmd functionsscameron@beardog.cca.cpqcorp.net
Factor out code to process target status of completed commands in sendcmd() and sendcmd_withirq_core(), and fix problem that bad target status was ignored in sendcmd_withirq_core. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: simplify interface of sendcmd() and sendcmd_withirq()scameron@beardog.cca.cpqcorp.net
Simplify interfaces of sendcmd() and sendcmd_withirq() so that they provide only one way to address commands instead of three ways. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: factor out core of sendcmd_withirq() for use by SCSI error handling codescameron@beardog.cca.cpqcorp.net
Factor the core of sendcmd_withirq out to provide a simpler interface which provides access to full error information. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-09cciss: Use schedule_timeout_uninterruptible in SCSI error handling codescameron@beardog.cca.cpqcorp.net
Use schedule_timeout_uninterruptible instead of schedule_timeout in the scsi error handling code when waiting between TUR polls since we are not interested in nor want to be interrupted by signals. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02cciss: use schedule_timeout_interruptible()Andrew Morton
Use schedule_timeout_interruptible() instead of open-coding the set and schedule parts. Cc: Mike Miller <mikem@beardog.cca.cpqcorp.net> Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02cciss: add cciss driver sysfs entriesAndrew Patterson
Add sysfs entries to the cciss driver needed for the dm/multipath tools. A file for vendor, model, rev, and unique_id is added for each logical drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY. Where X = the controller (or host) number and Y is the logical drive number. A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to /sys/block/cciss!cXdY/device is also created. A bus is created in /sys/bus/cciss. A link is created from the pci ccissX entry to /sys/bus/cciss/devices/ccissX. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02cciss: fix SCSI device reset handlerStephen M. Cameron
Fix the SCSI reset error handler to send a working, properly addressed reset message to the target device and add code to wait for the target device to become ready by polling it with Test Unit Ready. The existing reset code was broken in that it didn't bother to set the 8-byte LUN address to anything besides zero, so the command was addressed to the controller, which pretended to the driver that the command succeeded, while doing nothing. Ages ago I tested this code, but unbeknownst to me, my test was flawed, and what I thought was a tape drive getting reset was actually nothing of the sort. Unfortunately, there is still lots of Smartarray firmware that doesn't handle doing target resets right, and this code won't help in those cases, but it also shouldn't make things worse in those cases than they already are. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Cc: Mike Miller <mikem@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-02cciss: factor out core of sendcmd() for a more sane interfaceStephen M. Cameron
Factor out the core of sendcmd() to provide a simpler interface which exposes all the error information to the caller and make the original sendcmd use this new function. Rationale: The SCSI error handling routines need to send commands with interrupts turned off, but they also need access to the full error information. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Cc: Mike Miller <mikem@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-27aoe: Remove superfluous clearing of skb fields in new_skb().David S. Miller
This code uses alloc_skb() which clears them out for us. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22block: Use accessor functions for queue limitsMartin K. Petersen
Convert all external users of queue limits to using wrapper functions instead of poking the request queue variables directly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22block: Do away with the notion of hardsect_sizeMartin K. Petersen
Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22Merge branch 'master' into for-2.6.31Jens Axboe
Conflicts: drivers/ide/ide-io.c Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22xen-blkfront: beyond ARRAY_SIZE of info->shadowRoel Kluin
Do not go beyond ARRAY_SIZE of info->shadow Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-21microblaze: Kconfig: Enable drivers for MicroblazeMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-19block: set rq->resid_len to blk_rq_bytes() on issueTejun Heo
In commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f, while introducing rq->resid_len, the default value of residue count was changed from full count to zero. The conversion was done under the assumption that when a request fails residue count wasn't defined. However, Boaz and James pointed out that this wasn't true and the residue count should be preserved for failed requests too. This patchset restores the original behavior by setting rq->resid_len to blk_rq_bytes(rq) on request start and restoring explicit clearing in affected drivers. While at it, take advantage of the fact that rq->resid_len is set to full count where applicable. * ide-cd: rq->resid_len cleared on pc success * mptsas: req->resid_len cleared on success * sas_expander: rsp/req->resid_len cleared on success * mpt2sas_transport: req->resid_len cleared on success * ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take advantage of initial full count to simplify code Boaz Harrosh spotted bug in resid_len initialization. Fixed as suggested. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19ub: use __blk_end_request_all()Tejun Heo
ub_end_rq() always tries to complete full request. The @cmd_len parameter was there because rq->data_len used to be overwritten with residue count. Drop @cmd_len and use __blk_end_request_all(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19xen/blkfront: fix warning when deleting gendisk on unplug/shutdownIan Campbell
Currently blkfront gives a warning when hot unplugging due to calling del_gendisk() with interrupts disabled (due to blkif_io_lock). WARNING: at kernel/softirq.c:124 local_bh_enable+0x36/0x84() Modules linked in: xenfs xen_netfront ext3 jbd mbcache xen_blkfront Pid: 13, comm: xenwatch Not tainted 2.6.29-xs5.5.0.13 #3 Call Trace: [<c012611c>] warn_slowpath+0x80/0xb6 [<c0104cf1>] xen_sched_clock+0x16/0x63 [<c0104710>] xen_force_evtchn_callback+0xc/0x10 [<c0104e32>] check_events+0x8/0xe [<c0104d9b>] xen_restore_fl_direct_end+0x0/0x1 [<c0103749>] xen_mc_flush+0x10a/0x13f [<c0105bd2>] __switch_to+0x114/0x14e [<c011d92b>] dequeue_task+0x62/0x70 [<c0123b6f>] finish_task_switch+0x2b/0x84 [<c0299877>] schedule+0x66d/0x6e7 [<c0104710>] xen_force_evtchn_callback+0xc/0x10 [<c0104710>] xen_force_evtchn_callback+0xc/0x10 [<c012a642>] local_bh_enable+0x36/0x84 [<c022f9a7>] sk_filter+0x57/0x5c [<c0233dae>] netlink_broadcast+0x1d5/0x315 [<c01c6371>] kobject_uevent_env+0x28d/0x331 [<c01e7ead>] device_del+0x10f/0x120 [<c01e7ec6>] device_unregister+0x8/0x10 [<c015f86d>] bdi_unregister+0x2d/0x39 [<c01bf6f4>] unlink_gendisk+0x23/0x3e [<c01ac946>] del_gendisk+0x7b/0xe7 [<d0828c19>] blkfront_closing+0x28/0x6e [xen_blkfront] [<d082900c>] backend_changed+0x3ad/0x41d [xen_blkfront] We can fix this by calling del_gendisk() later in blkfront_closing, after releasing blkif_io_lock. Since the queue is stopped during the interrupts disabled phase I don't think there is any danger of an event occuring between releasing the blkif_io_lock and deleting the disk. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19xen/blkfront: allow xenbus state transition to Closing->Closed when not ↵Ian Campbell
Connected This situation can occur when attempting to attach a block device whose backend is an empty physical CD-ROM driver. The backend in this case will go directly from the Initialising state to Closing->Closed. Previously this would result in a NULL pointer deref on info->gd (xenbus_dev_fatal does not return as a1a15ac5 seems to expect) Cc: stable@kernel.org Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-18virtio_blk: get rid of unused variableJens Axboe
drivers/block/virtio_blk.c: In function 'blk_done': drivers/block/virtio_blk.c:53: warning: unused variable 'nr_bytes' Leftover from commit 1cde26f928863d90e9e7c1217880c8450464d305 Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-18virtio_blk: SG_IO passthru supportHannes Reinecke
Add support for SG_IO passthru to virtio_blk. We add the scsi command block after the normal outhdr, and the scsi inhdr with full status information aswell as the sense buffer before the regular inhdr. [hch: forward ported, added the VIRTIO_BLK_F_SCSI flags, some comments and tested the whole beast] [axboe: updated to use ->resid and not dual-path the byte count] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ checkpatch.pl tweak) Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-18virtio_blk: don't blindly derefence req->rq_diskChristoph Hellwig
request->rq_disk is only set for FS requests or BLOCK_PC requests originating from the generic block layer scsi ioctls. It's not set for requests origination from other soures or internal cache flush commands implemented by the patch I'll send after this. So instead of using it to get at the private data in do_virtblk_request setup queue->queuedata and use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11splice: implement default splice_read methodMiklos Szeredi
If f_op->splice_read() is not implemented, fall back to a plain read. Use vfs_readv() to read into previously allocated pages. This will allow splice and functions using splice, such as the loop device, to work on all filesystems. This includes "direct_io" files in fuse which bypass the page cache. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>