aboutsummaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)Author
2006-06-25[PATCH] CCISS: tidy up product table indentationBjorn Helgaas
Make each one fit on a line so it's easier to read. I re-ordered COMPAQ_CISSC/0x4091, which was out of order. I double-checked these, but it would be good if you'd also check them to make sure I didn't miss any. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] CCISS: run through LindentBjorn Helgaas
cciss is full of inconsistent style ("for (" vs. "for(", lines that end with whitespace, lines beginning with a mix of spaces & tabs, etc). This patch changes only whitespace. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] CCISS: remove parens around return valuesBjorn Helgaas
Typical Linux style is "return -EINVAL", not "return(-EINVAL)". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] CCISS: fix a few spelling errorsBjorn Helgaas
Fix a few spelling errors. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] CCISS: use ARRAY_SIZE without intermediatesBjorn Helgaas
It's easier to verify loop bounds if the array name is mentioned the for() statement that steps through the array. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] CCISS: announce cciss%d devices with PCI address/IRQ/DAC infoBjorn Helgaas
We already print "cciss: using DAC cycles" or similar for every adapter found: why not just identify the device we're talking about and include other useful information? Jeff Garzik <jeff@garzik.org>: Although this patch is correct, I would consider using dev_printk() rather than referencing pci_name() in printk() arguments. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] CCISS: request all PCI resourcesBjorn Helgaas
We should call pci_request_regions() to claim all resources the device decodes. Previously, we claimed only the I/O port range. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] CCISS: disable device when returning failureBjorn Helgaas
If something fails after we call pci_enable_device(), we should call pci_disable_device() before returning the failure. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] kthread: update loop.c to use kthreadSerge E. Hallyn
Update loop.c to use a kthread instead of a deprecated kernel_thread for loop devices. [akpm@osdl.org: don't change the thread's name] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] cpqarray section fixAndrew Morton
WARNING: drivers/block/cpqarray.o - Section mismatch: reference to .init.text: from .text between 'cpqarray_register_ctlr' (at offset 0xe98) and 'alloc_cpqarray_hba' WARNING: drivers/block/cpqarray.o - Section mismatch: reference to .init.text: from .text between 'cpqarray_register_ctlr' (at offset 0xe9c) and 'alloc_cpqarray_hba' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] nbd: kill obsolete changelog, add GPLPavel Machek
nbd abuses file header as a changelog (and obsolete one, too), and fails to mention GPL. This fixes it. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] random: change cpqarray to use add_disk_randomnessMatt Mackall
Disk devices should use add_disk_randomness rather than SA_SAMPLE_RANDOM Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] random: make CCISS use add_disk_randomnessMatt Mackall
Disk devices should use the add_disk_randomness API rather than SA_SAMPLE_RANDOM. Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] m68k: introduce irq controllerRoman Zippel
Introduce irq controller and use it to manage auto vector interrupts. Introduce setup_irq() which can be used for irq setup. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] drivers/block/loop.c: don't return garbage if LOOP_SET_STATUS not calledConstantine Sapuntzakis
While writing a version of losetup, I ran into the problem that the loop device was returning total garbage. It turns out the problem was that this losetup was only issuing the LOOP_SET_FD ioctl and not issuing a subsequent LOOP_SET_STATUS ioctl. This losetup didn't have any special status to set, so it left out the call. The deeper cause is that loop_set_fd sets the transfer function to NULL, which causes no transfer to happen lo_do_transfer. This patch fixes the problem by setting transfer to transfer_none in loop_set_fd. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] frv: initrd is grossly broken on frv (never built)Al Viro
The FRV arch doesn't currently support initrd, so it should be disabled automatically for the moment. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
2006-06-21[PATCH] ub: random cleanupsPete Zaitcev
Remove some silly messages and cast in stone "temporary" messages which we keep around. Also, I am hesitant to remove the initialization retries without having the hardware to test (anyone who was at KS04 has a spare?) Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] ub: atomic add_diskPete Zaitcev
<zaitcev> I am taling about this: "if (disk->flags & GENHD_FL_UP) del_gendisk(disk);" <zaitcev> If del_gendisk() undoes add_disk() like viro just said, why is it conditional? <viro> huh? <viro> add_disk() sets the damn flag <zaitcev> So, I should not need to check ever <viro> so the above is "if I've called add_disk(), call gendisk()" <viro> which might be what you want, of course <viro> but usually you know if you'd done add_disk() on that puppy anyway In ub, nobody upstream should ever see half-constructed disks before they were passed to add_disk. To that end, only add the struct lun to the list on the path of no return. With that fix in place, we do not need to test GENHD_FL_UP. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] USB: clean out an unnecessary NULL check from ubPete Zaitcev
Remove the check for NULL which makes no sense. Suggested by Al. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] CCISS: add device symlink to the block cciss block devices in sysfsGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
2006-06-17[NET]: Clean up skb_linearizeHerbert Xu
The linearisation operation doesn't need to be super-optimised. So we can replace __skb_linearize with __pskb_pull_tail which does the same thing but is more general. Also, most users of skb_linearize end up testing whether the skb is linear or not so it helps to make skb_linearize do just that. Some callers of skb_linearize also use it to copy cloned data, so it's useful to have a new function skb_linearize_cow to copy the data if it's either non-linear or cloned. Last but not least, I've removed the gfp argument since nobody uses it anymore. If it's ever needed we can easily add it back. Misc bugs fixed by this patch: * via-velocity error handling (also, no SG => no frags) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-10Merge ../linux-2.6James Bottomley
2006-06-06[SCSI] fix up request buffer reference in various scsi driversChristoph Hellwig
Various scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their queuecommand functions. Those fields are internal storage for the midlayer only and are used to restore the original payload after request_buffer and request_bufflen have been overwritten for EH. Using the buffer and bufflen fields means they do very broken things in error handling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] fix (unlikely) memory leak in DAC960 driverJesper Juhl
The Coverity checker found a memory leak (bug nr. 1245) in drivers/block/DAC960.c::DAC960_V2_ProcessCompletedCommand() The leak is pretty unlikely since it requires that the first of two successive kmalloc() calls fail while the second one succeeds. But it can still happen even if it's unlikely. If the first call that allocates 'PhysicalDeviceInfo' fails but the one that allocates 'InquiryUnitSerialNumber' succeeds, then we will leak the memory allocated to 'InquiryUnitSerialNumber' when the variable goes out of scope. A simple fix for this is to change the existing code that frees 'PhysicalDeviceInfo' if that one was allocated but 'InquiryUnitSerialNumber' was not, into a check for either pointer being NULL and if so just free both. This is safe since kfree() can deal with being passed a NULL pointer and it avoids the leak. While I was there I also removed the casts of the kmalloc() return value since it's pointless. I also updated the driver version since this patch changes the workings of the code (however slightly). This issue could probably be fixed a lot more elegantly, but the code is a big mess IMHO and I just took the least intrusive route to a fix that I could find instead of starting on a cleanup as well (that can come later). Please consider for inclusion. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-19Merge ../linux-2.6Paul Mackerras
2006-05-19[PATCH] powerpc: update iSeries viodasd device-tree entriesStephen Rothwell
These devices should have device_type block and a unique compatible entry. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-08[PATCH] USB: ub oops in block_ueventPete Zaitcev
In kernel 2.6.16, if a mounted storage device is removed, an oops happens because ub supplies an interface device (and kobject) to the block layer, but neglects to pin it. And apparently, the block layer expects its users to pin device structures. The code in ub was broken this way for years. But the bug was exposed only by 2.6.16 when it started to call block_uevent on close, which traverses device structures (kobjects actually). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-28[PATCH] powerpc: Use check_legacy_ioport() on ppc32 too.David Woodhouse
Some people report that we die on some Macs when we are expecting to catch machine checks after poking at some random I/O address. I'd seen it happen on my dual G4 with serial ports until we fixed those to use OF, but now other users are reporting it with i8042. This expands the use of check_legacy_ioport() to avoid that situation even on 32-bit kernels. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-17[PATCH] cciss: bug fix for crash when running hpacucliMike Miller
Fix a crash when running hpacucli with multiple logical volumes on a cciss controller. We were not properly initializing the disk->queue and causing a fault. Thanks to Hasso Tepper for reporting the problem. Thanks to Steve Cameron for root causing the problem. Most of the patch just moves things around. The fix is a one-liner. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Stephen Cameron <steve.cameron@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-31[PATCH] Don't pass boot parameters to argv_init[]OGAWA Hirofumi
The boot cmdline is parsed in parse_early_param() and parse_args(,unknown_bootoption). And __setup() is used in obsolete_checksetup(). start_kernel() -> parse_args() -> unknown_bootoption() -> obsolete_checksetup() If __setup()'s callback (->setup_func()) returns 1 in obsolete_checksetup(), obsolete_checksetup() thinks a parameter was handled. If ->setup_func() returns 0, obsolete_checksetup() tries other ->setup_func(). If all ->setup_func() that matched a parameter returns 0, a parameter is seted to argv_init[]. Then, when runing /sbin/init or init=app, argv_init[] is passed to the app. If the app doesn't ignore those arguments, it will warning and exit. This patch fixes a wrong usage of it, however fixes obvious one only. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] Replace 0xff.. with correct DMA_xBIT_MASKMatthias Gehre
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] drivers/block/*: use time_after() and friendsMarcelo Feitoza Parisi
They deal with wrapping correctly and are nicer to read. Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] drivers/block/acsi_slm.c: size_t can't be < 0Alexey Dobriyan
A size_t can't be < 0. (akpm: and rw_verify_area() already did that check) Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] drivers/block/paride/pd.c: fix an off-by-one errorAdrian Bunk
The Coverity checker found this off-by-one error. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] paride-pt: register_chrdev fixAndrew Morton
If the user specified `major=0' (odd thing to do), pt.c will use dynamic allocation. We need to pick up that major for subsequent unregister_chrdev(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] paride: register_chrdev fixAndrew Morton
If the user specified `major=0' (odd thing to do), pg.c will use dynamic allocation. We need to pick up that major for subsequent unregister_chrdev(). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28[PATCH] let BLK_DEV_RAM_COUNT depend on BLK_DEV_RAMAdrian Bunk
It's purely cosmetic, but with the patch there's no longer a BLK_DEV_RAM_COUNT setting in the .config if BLK_DEV_RAM=n. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] unused label in drivers/block/cciss.Eric Sesterhenn
this patch removes a warning about an unused label, by moving the label into the ifdef. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-27[PATCH] kzalloc() conversion in drivers/blockEric Sesterhenn
this patch converts drivers/block to kzalloc usage. Compile tested with allyesconfig. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-26[PATCH] mempool: use mempool_create_slab_pool()Matthew Dobson
Modify well over a dozen mempool users to call mempool_create_slab_pool() rather than calling mempool_create() with extra arguments, saving about 30 lines of code and increasing readability. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] mempool: use common mempool kmalloc allocatorMatthew Dobson
This patch changes several mempool users, all of which are basically just wrappers around kmalloc(), to use the common mempool_kmalloc/kfree, rather than their own wrapper function, removing a bunch of duplicated code. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] Update documentation for BLK_DEV_INITRD to match current usageH. Peter Anvin
Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Zdenek Pavlas <pavlas@nextra.cz> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] loop: potential kernel hang waiting for kthreadHerbert Poetzl
Check that kernel_thread() succeeded, so we don't wait for something which cannot happen. Signed-off-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] drivers/block/floppy.c: dont free_irq() from irq contextIngo Molnar
free_irq() should not be executed from softirq context. Found by the lock validator. The fix is to push fd_free_irq() into keventd. The code validates fine with this patch applied. (akpm: this is revolting, but so is floppy.c) [akpm@osdl.org: added flush_scheduled_work()] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/aoe-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/aoe-2.6: [PATCH] aoe [3/3]: update version to 22 [PATCH] aoe [2/3]: don't request ATA device ID on ATA error [PATCH] aoe [1/3]: support multiple AoE listeners [PATCH] aoe: do not stop retransmit timer when device goes down [PATCH] aoe [8/8]: update driver version number [PATCH] aoe [7/8]: update driver compatibility string [PATCH] aoe [6/8]: update device information on last close [PATCH] aoe [5/8]: allow network interface migration on packet retransmit [PATCH] aoe [4/8]: use less confusing driver name [PATCH] aoe [3/8]: increase allowed outstanding packets [PATCH] aoe [2/8]: support dynamic resizing of AoE devices [PATCH] aoe [1/8]: zero packet data after skb allocation
2006-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits) BUG_ON() Conversion in drivers/video/ BUG_ON() Conversion in drivers/parisc/ BUG_ON() Conversion in drivers/block/ BUG_ON() Conversion in sound/sparc/cs4231.c BUG_ON() Conversion in drivers/s390/block/dasd.c BUG_ON() Conversion in lib/swiotlb.c BUG_ON() Conversion in kernel/cpu.c BUG_ON() Conversion in ipc/msg.c BUG_ON() Conversion in block/elevator.c BUG_ON() Conversion in fs/coda/ BUG_ON() Conversion in fs/binfmt_elf_fdpic.c BUG_ON() Conversion in input/serio/hil_mlc.c BUG_ON() Conversion in md/dm-hw-handler.c BUG_ON() Conversion in md/bitmap.c The comment describing how MS_ASYNC works in msync.c is confusing rcu: undeclared variable used in documentation fix typos "wich" -> "which" typo patch for fs/ufs/super.c Fix simple typos tabify drivers/char/Makefile ...
2006-03-25[PATCH] BLK_DEV_INITRD: do not require BLK_DEV_RAM=yZdenek Pavlas
Initramfs initrd images do not need a ramdisk device, so remove this restriction in Kconfig. BLK_DEV_RAM=n saves about 13k on i386. Also without ramdisk device there's no need for "dry run", so initramfs unpacks much faster. People using cramfs, squashfs, or gzipped ext2/minix initrd images are probably smart enough not to turn off ramdisk support by accident. Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] block/floppy: fix section mismatch warningsSam Ravnborg
In latest -mm a number of section mismatch warnings are generated for floppy.o like the following: WARNING: drivers/block/floppy.o - Section mismatch: reference to \ .init.data: from .text between 'init_module' (at offset 0x6976) and \ 'cleanup_module' The warning are caused by a reference to floppy_init() which is __init from init_module() which is not declared __init. Declaring init_module() _init fixes this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>