aboutsummaryrefslogtreecommitdiff
path: root/drivers/char/Kconfig
AgeCommit message (Collapse)Author
2006-10-03[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.Yoichi Yuasa
As per feature-removal-schedule.txt. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-09-30[PATCH] BLOCK: Make it possible to disable the block layer [try #6]David Howells
Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-29[PATCH] Remove old drivers/char/s3c2410_rtc.cBen Dooks
This can now be removed, since there is now a drivers/rtc/rtc-s3c.c driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (108 commits) sh: Fix occasional flush_cache_4096() stack corruption. sh: Calculate shm alignment at runtime. sh: dma-mapping compile fixes. sh: Initial vsyscall page support. sh: Clean up PAGE_SIZE definition for assembly use. sh: Selective flush_cache_mm() flushing. sh: More intelligent entry_mask/way_size calculation. sh: Support for L2 cache on newer SH-4A CPUs. sh: Update kexec support for API changes. sh: Optimized readsl()/writesl() support. sh: Report movli.l/movco.l capabilities. sh: CPU flags in AT_HWCAP in ELF auxvt. sh: Add support for 4K stacks. sh: Enable /proc/kcore support. sh: stack debugging support. sh: select CONFIG_EMBEDDED. sh: machvec rework. sh: Solution Engine SH7343 board support. sh: SH7710VoIPGW board support. sh: Enable verbose BUG() support. ...
2006-09-27[PATCH] mspec driverJes Sorensen
Implement the special memory driver (mspec) based on the do_no_pfn approach. The driver is currently used only on SN2 hardware with special fetchop support but could be beneficial on other architectures using the uncached mode. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27sh: Kill off the rest of the legacy rtc mess.Paul Mundt
With the new RTC class driver, we can get rid of most of the old left over cruft. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-08-25[POWERPC] Only offer CONFIG_BRIQ_PANEL if CONFIG_PPC_CHRP is enabledPaul Mackerras
since only the briQ has a briQ front panel, and the briQ is a CHRP and is only supported if CONFIG_PPC_CHRP is set. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31[POWERPC] briq_panel Kconfig fixAndrew Morton
drivers/char/briq_panel.c:28:22: error: asm/prom.h: No such file or directory Cc: Jeremy Kerr <jk@ozlabs.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-13[POWERPC] iseries: A new iSeries consoleStephen Rothwell
This driver uses the hvc_console.c infrastructure that is used by the pSeries virtual and RTAS consoles. This will allow us to make viocons.c obsolete and is another step along the way to a combined kernel (as viocons could not coexist with CONFIG_VT). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-07-07[POWERPC] Add support for briq front panelBenjamin Herrenschmidt
This adds the driver for the Briq front panel. This is a cleaned up version of a driver that has been floating around for some time now, initially written by Karsten Jeppesen <karsten@jeppesens.com> and cleaned up by jk and myself. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-29[PATCH] GPIO for SCx200 & PC-8736x: x86-onlyDave Jones
AFAICT, this is x86 only, so the patch below is needed to stop this new option showing up on PPC, IA64, etc.. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27[PATCH] chardev: GPIO for SCx200 & PC-8736x: add proper Kconfig, Makefile ↵Jim Cromie
entries Replace the temp makefile hacks with proper CONFIG entries, which are also added to Kconfig. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] VT binding: Make VT binding a Kconfig optionAntonino A. Daplas
To enable this feature, CONFIG_VT_HW_CONSOLE_BINDING must be set to 'y'. This feature will default to 'n' to minimize users accidentally corrupting their virtual terminals. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Add new generic HW RNG coreMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26[PATCH] Remove old HW RNG supportMichael Buesch
This patch series replaces the old non-generic Hardware Random Number Generator support by a fully generic RNG API. This makes it possible to register additional RNGs from modules. With this patch series applied, Laptops with a bcm43xx chip (PowerBook) have a HW RNG available now. Additionally two new RNG drivers are added for the "ixp4xx" and "omap" devices. (Written by Deepak Saxena). This patch series includes the old patches by Deepak Saxena. The old x86-rng driver has beed split. The userspace RNG daemon can later be updated to select the RNG through /sys/class/misc/hw_random/ for convenience. For now it is sufficient to use cat and echo -n on the sysfs attributes. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] add "select GPIO_VR41XX" for TANBAC_TB0229Yoichi Yuasa
TANBAC_TB0229 requires GPIO_VR41XX. This patch adds "select GPIO_VR41XX" for TANBAC_TB0229. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-15[PATCH] Final rio polishAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11[PATCH] RTC subsystem: VR41XX driverYoichi Yuasa
This patch updates VR4100 series RTC driver. * This driver supports new RTC subsystem. * Simple set time/read time test worked fine. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-29Merge ../linux-2.6Paul Mackerras
2006-03-28[PATCH] powerpc: add hvc backend for rtasArnd Bergmann
Current Cell hardware is using the console through a set of rtas calls. This driver is needed to get console output on those boards. Signed-off-by: Arnd Bergmann <abergman@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28[PATCH] powerpc: hvc_console updatesRyan S. Arnold
These are some updates from both Ryan and Arnd for the hvc_console driver: The main point is to enable the inclusion of a console driver for rtas, which is currrently needed for the cell platform. Also shuffle around some data-type declarations and moves some functions out of include/asm-ppc64/hvconsole.h and into a new drivers/char/hvc_console.h file. Signed-off-by: "Ryan S. Arnold" <rsa@us.ibm.com> Signed-off-by: Arnd Bergmann <abergman@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27[PATCH] RTC subsystem: ARM cleanupAlessandro Zummo
This patch removes from the ARM subsytem some of the rtc-related functions that have been included in the RTC subsystem. It also fixes some naming collisions. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] isicom: select FW_LOADERmaximilian attems
The isicom driver uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: maximilian attems <maks@sternwelten.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] rio driver rework continued #5Alan Cox
Final polish. There is no more save_flags/cli type locking left. We also no longer use the pcicopy function and file so they can go. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] powerpc: dont allow old RTC to be selectedAnton Blanchard
Now powerpc uses the generic RTC stuff we should not enable the old RTC. Doing so will result in hangs at boot. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-08[PATCH] synclink_gt is PCI-onlyAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-01[PATCH] s390: hangcheck timer supportJan Glauber
Remove useless s390 define from hangcheck-timer, remove wrong definition of a TOD second and other s390 ifdefs. Use monotonic_clock instead. Add hangcheck-timer option, copied from drivers/char/Kconfig. This is ugly but unless we have a big Kconfig cleanup we cannot include drivers/char/Kconfig... Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15ftape: remove some outdated information from Kconfig filesAdrian Bunk
This patch removes some outdated information about the ftape driver like pointers to no longer existing webpages from Kconfig files. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-10[PATCH] TTY layer buffering revampAlan Cox
The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] Disable rio on 64-bit platformsAlexey Dobriyan
Do it via Kconfig rather than via #error. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] i386: GPIO driver for AMD CS5535/CS5536Ben Gardner
A simple driver for the CS5535 and CS5536 that allows a user-space program to manipulate GPIO pins. The CS5535/CS5536 chips are Geode processor companion devices. Signed-off-by: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] new driver synclink_gtPaul Fulghum
New character device driver for the SyncLink GT and SyncLink AC families of synchronous and asynchronous serial adapters Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] frv: suppress configuration of certain features for FRVDavid Howells
Suppress configuration of certain features for the FRV arch as they can't be built for FRV at the moment: (*) RTC (*) HISAX_* (*) PARPORT_PC (*) VGA_CONSOLE (*) BINFMT_ELF Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: cleanup KconfigMartin Schwidefsky
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-22[SPARC]: introduce a SPARC Kconfig symbolAdrian Bunk
Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[SPARC]: Fix RTC build failure.Adrian Bunk
On sparc and sparc64, the rtc driver doesn't compile with PCI support disabled. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-12[PATCH] raw driver: Kconfig fixAndrew Morton
CONFIG_MAX_RAW_DEVS should appear immediately after CONFIG_RAW_DRIVER. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] powerpc: kill ppc64 rtc.c, use genrtc insteadBenjamin Herrenschmidt
This moves the rtas RTC callbacks to rtas-rtc.c in arch/powerpc/kernel, and kills the rest of arch/ppc64/kernel/rtc.c which was just a duplicate of the genrtc functionality. Also enable build of genrtc for CONFIG_PPC64 (it just works are we already have the required callbacks) and enable it in all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-30[PATCH] Telecom Clock Driver for MPCBL0010 ATCA computer bladeMark Gross
Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] CONFIG_IA32Brian Gerst
Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] gratuitous includes of asm/serial.hviro@ZenIV.linux.org.uk
Removed gratuitous includes of asm/serial.h in synklinkmp and ip2main. Allows to remove the rest of "broken on sparc32" in drivers/char - this stuff doesn't break the build anymore. Since it got zero testing, it almost certainly won't work there, though... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] Clean up the old digi support and rescue itAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[SPARC64]: Kconfig fix (GEN_RTC dependencies)Al Viro
Yet another architecture not coverd by GEN_RTC - sparc64 never picked it until now and it doesn't have asm/rtc.h to go with it, so it wouldn't compile anyway (or have these ioctls in the user-visible headers, for that matter). FWIW, I'm very tempted to introduce ARCH_HAS_GEN_RTC and have it set in arch/*/Kconfig for architectures that know what to do with this stuff - for something supposedly generic the list of architectures where it doesn't work is getting too long... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05[MOXA]: Fix this driver properly.Al Viro
Actually, proper fix of that breakage is embarrassingly simple - it's yet another gratitious leftover include of asm/segment.h, so incremental to the previos would be removal of that BROKEN and removal of bogus include from mxser.c itself. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-05Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Linus Torvalds
2005-09-05[PATCH] fix warning of TANBAC_TB0219 in drivers/char/KconfigYoichi Yuasa
$ make menuconfig scripts/kconfig/mconf arch/i386/Kconfig drivers/char/Kconfig:847:warning: 'select' used by config symbol 'TANBAC_TB0219' refer to undefined symbol 'PCI_VR41XX' Here is a patch for this warning fix. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] mips: add TANBAC VR4131 multichip moduleYoichi Yuasa
This patch has added TANBAC VR4131 multichip module in arch/mips/Kconfig Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02[SPARC32]: More dependencies falloutAl Viro
More stuff that got exposed to sparc32 build due to inclusion of drivers/char/Kconfig in arch/sparc/Kconfig needs to be excluded. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-23[PATCH] Kconfig fix (sparc32 drivers/char dependencies)Al Viro
since sparc32 Kconfig includes drivers/char/Kconfig (instead of duplicating its parts) we need several new dependencies there to exclude the stuff broken on sparc32 and not excluded by existing dependencies. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23[PATCH] Kconfig fix (m32r genrtc)Al Viro
genrtc is not for m32r; marked as such. Probably ought to put that into arch/* - list of "don't build it on <platform>" is getting too long. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>