aboutsummaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)Author
2008-02-07i915: Fix GR register array size off-by-one bugJesse Barnes
Make sure we have enough room for all the GR registers or we'll end up clobbering the AR index register (which should actually be harmless unless the BIOS is making an assumption about it). Noticed-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits) drm: add initial r500 drm support radeon: setup the ring buffer fetcher to be less agressive. drm: fixup some of the ioctl function exit paths drm: the drm really should call pci_set_master.. i915: Add chipset id for Intel Integrated Graphics Device drm: cleanup DRM_DEBUG() parameters drm/i915: add support for E7221 chipset drm: don't cast a pointer to pointer of list_head mga_dma: return 'err' not just zero from mga_do_cleanup_dma() drm: add _DRM_DRIVER flag, and re-order unload. drm: enable udev node creation drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx. drm: move drm_mem_init to proper place in startup sequence drm: call driver load function after initialising AGP drm: Fix ioc32 compat layer drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't. i915: add suspend/resume support drm: update DRM sysfs support drm: Initialize the AGP structure's base address at init rather than enable. drm: move two function extern into the correct block ...
2008-02-07Merge branch 'for-2.6.25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits) [POWERPC] Add SPE registers to core dumps [POWERPC] Use regset code for compat PTRACE_*REGS* calls [POWERPC] Use generic compat_sys_ptrace [POWERPC] Use generic compat_ptrace_request [POWERPC] Use generic ptrace peekdata/pokedata [POWERPC] Use regset code for PTRACE_*REGS* requests [POWERPC] Switch to generic compat_binfmt_elf code [POWERPC] Switch to using user_regset-based core dumps [POWERPC] Add user_regset compat support [POWERPC] Add user_regset_view definitions [POWERPC] Use user_regset accessors for GPRs [POWERPC] ptrace accessors for special regs MSR and TRAP [POWERPC] Use user_regset accessors for SPE regs [POWERPC] Use user_regset accessors for altivec regs [POWERPC] Use user_regset accessors for FP regs [POWERPC] mpc52xx: fix compile error introduce when rebasing patch [POWERPC] 4xx: PCIe indirect DCR spinlock fix. [POWERPC] Add missing native dcr dcr_ind_lock spinlock [POWERPC] 4xx: Fix offset value on Warp board [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry ...
2008-02-07Char: mxser, add support for CP-114ULJiri Slaby
Add new card (0x1393:0x1143) support added in 1.11 original driver, also allow rate change in set_serial_info ioctl (as per 1.11 too). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, remove itJiri Slaby
(Old) mxser is obsoleted by mxser_new and scheduled for removal on Dec 2007. Remove it by renaming mxser_new to mxser. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, ioctl cleanupJiri Slaby
- remove dead MOXA_GET_CONF (always returned -ENXIO) - remove useless MOXA_GET_CUMAJOR (unused) - use get/put_user instead of copy_from/to_user for simple types - cleanup TIOCMIWAIT -- return -ERESTARTSYS on signal, move condition into separate function Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, simplify mxser_get_serial_infoJiri Slaby
Initialize temp structure directly with proper values without first zeroing it and setting later as suggested by Jan. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jan Engelhardt <jengelh@computergmbh.de> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, reorder mxser_cardinfo fieldsJiri Slaby
Reorder fields to save some memory and code on 64bit due to alignment as suggested by Jan. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jan Engelhardt <jengelh@computergmbh.de> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, 0 to NULL in pointerJiri Slaby
Don't test a pointer against 0. Use NULL instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser, remove special baudrate processingJiri Slaby
Let the special baudrate processing on the tty layer. Also remove set/get_special_rate ioctls introduced in commit f64c84a1668930d1ca2b7dbaa92146c2139cb508, since it is no longer needed. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Reviewed-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07mxser/mxser_new: first pass over termios reporting for the mxser cardsAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: riscom8, remove wakeup and hangup bottomhalvesJiri Slaby
Both of them may be called directly from the code, don't add special code and variables and schedule a work for them. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: serial167, remove bottomhalfJiri Slaby
- Cy_EVENT_OPEN_WAKEUP is simple wake_up - Cy_EVENT_HANGUP is wake_up + tty_hangup, which schedules its own work - Cy_EVENT_WRITE_WAKEUP is tty_wakeup which may be called directly too Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: stallion, remove bottomhalfJiri Slaby
- tty_hangup schedules a bottomhalf itself, tty_wakeup doesn't need it - call the CD code (part of work handler previously) directly from the code (it wakes somebody up or calls tty_hangup at worse) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: specialix, remove bottomhalvesJiri Slaby
- tqueue is used only for tty_wakeup, call it directly from the code - tqueue_hangup for tty_hangup, it schedules its own work, use it directly too Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: istallion, remove hangup bottomhalfJiri Slaby
tty_hangup schedules a work for hangup itself, no need to do it in the driver. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: esp, remove hangup and wakeup bottomhalvesJiri Slaby
There is no need to schedule a bottomhalf for either of them. One is fast and the another schedules a bottomhalf itself. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: riscom8, change rc_init_drivers prototypeJiri Slaby
Let compiler decide if the rc_init_drivers function will be inlined and mark it as __init, because it's called only from __init function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: stallion, fix compiler warningsJiri Slaby
Don't emit warnings on 64 bit platforms from min(). sizeof() on those is not uint, neither 2 pointers difference, cast it to uint by min_t in both cases. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: mxser_new, ioaddresses are ulongJiri Slaby
To not pass ulong address as int parameter, switch it to ulong. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: char/serial, remove SERIAL_TYPE_NORMAL redefinesJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: rocket, remove useless macrosJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: rocket, printk cleanupJiri Slaby
- add KERN_ level to each print - change some levels appropriately - add \n at the ends where missing - change two complex printks into dev_info, where the original info is printed automatically Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Char: rocket, switch long delay to sleepJiri Slaby
Don't busy wait for whole 1s when registering some rocket modems. Sleep instead since we are not in atomic. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07i8k: Inspiron E1705 fixFrank Sorenson
Needs the following in order to work correctly on my Inspiron E1705: Add DMI Product name to i8k for Dell MP061 hardware (Inspiron 9400/E1705) Signed-off-by: Frank Sorenson <frank@tuxrocks.com> Cc: Bradley Smith <bradjsmith@btinternet.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07I8K: allow i8k driver to be built on x86_64 systemsBradley Smith
Adds #if clause and additional inline assembly so that the driver builds on x86_64 systems. Signed-off-by: Bradley Smith <bradjsmith@btinternet.com> Cc: Frank Sorenson <frank@tuxrocks.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07MBCS: convert dmareadlock to mutexMatthias Kaehlcke
MBCS: Convert the semaphore dmareadlock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07MBCS: convert dmawritelock to mutexMatthias Kaehlcke
MBCS: Convert the semaphore dmawritelock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07MBCS: convert algolock to mutexMatthias Kaehlcke
MBCS: Convert the semaphore algolock to the mutex API Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drm: add initial r500 drm supportDave Airlie
This adds CP support for the r500 series of chips, and allows accel 2D support on these chips with a new radeon driver. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-07radeon: setup the ring buffer fetcher to be less agressive.Roland Scheidegger
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: fixup some of the ioctl function exit pathsDave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: the drm really should call pci_set_master..Dave Airlie
perhaps bonghits could turn on my bus-mastering because the drm certainly never bothered doing it before. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07i915: Add chipset id for Intel Integrated Graphics DeviceZhenyu Wang
This adds new chipset id in drm. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-02-07drm: cleanup DRM_DEBUG() parametersMárton Németh
As DRM_DEBUG macro already prints out the __FUNCTION__ string (see drivers/char/drm/drmP.h), it is not worth doing this again. At some other places the ending "\n" was added. airlied:- I cleaned up a few that this patch missed also Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm/i915: add support for E7221 chipsetCarlos Martín
E7221 chipset is a server version of the i915. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: don't cast a pointer to pointer of list_headLi Zefan
The casting is safe only when the list_head member is the first member of the structure. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07mga_dma: return 'err' not just zero from mga_do_cleanup_dma()Jesper Juhl
While reading some code I stumbled across the use of 'err' in drivers/char/drm/mga_dma.c::mga_do_cleanup_dma() and I think there's a small problem. The variable is only used inside #if __OS_HAS_AGP which is fine, but all that ever happens is an assignment to the variable - it is never actually used for anything. The variable is nicely initialized to zero which is also what the return statement at the end of function returns (always at the moment). It looks to me like that function should be returning 'err' instead of always just returning 0. Here's a patch to do that. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: add _DRM_DRIVER flag, and re-order unload.Dave Airlie
Allow drivers to addmaps that won't be removed by lastclose or unload. The unload needs to be re-ordered to avoid removing the hashs before the driver has removed the final maps. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: enable udev node creationDave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx.Eric Anholt
Fixes the getclient test and dritest -c. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: move drm_mem_init to proper place in startup sequenceDave Airlie
For TTM this needs to be called later. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: call driver load function after initialising AGPDave Airlie
needed to intel chipset flushing Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: Fix ioc32 compat layerIan Romanick
Previously any ioctls that weren't explicitly listed in the compat ioctl table would fail with ENOTTY. If the incoming ioctl number is outside the range of the table, assume that it Just Works, and pass it off to drm_ioctl. This make the fence related ioctls work on 64-bit PowerPC. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't.Eric Anholt
The i830 and newer intel 2D code adds the AGP base to map offsets already, because it wasn't doing the AGP enable which used to set dev->agp->base. Credit goes to Zhenyu for finding the issue. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07i915: add suspend/resume supportJesse Barnes
Add suspend/resume support to the i915 driver. Moves some of the initialization into the driver load routine, and fixes up places where we assumed no dev_private existed in some of the cleanup paths. This allows us to suspend/resume properly even if X isn't running. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: update DRM sysfs supportJesse Barnes
Make DRM devices use real Linux devices instead of class devices, which are going away. While we're at it, clean up some of the interfaces to take struct drm_device * or struct device * and use the global drm_class where needed instead of passing it around. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: Initialize the AGP structure's base address at init rather than enable.Eric Anholt
Not all drivers call enable (intel), but they would still like to use this member in driver code. Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-02-07drm: move two function extern into the correct blockDave Airlie
2008-02-07drm: run cleanfile across drm treeDave Airlie
Signed-off-by: Dave Airlie <airlied@linux.ie>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 18:20:53 +0000