aboutsummaryrefslogtreecommitdiff
path: root/drivers/edac/Kconfig
AgeCommit message (Collapse)Author
2009-01-06edac: driver for i5400 MCH (Seaburg)Mauro Carvalho Chehab
EDAC driver for i5400 MCH (Seaburg) This driver adds support for i5400 MCH chipset. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Ben Woodard <woodard@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-22powerpc/cell: add QPACE as a separate Cell platformBenjamin Krill
Since the QPACE (Chromodynamics Parallel Computing on the Cell Broadband Engine) platform doesn't use a iommu, doesn't have PCI devices and a MPIC much lesser setup and configurations are needed. So far all devices are detected as OF device. A notifier function is used to set the dma_ops for the of_platform bus. Further this patch splits the PPC_CELL_NATIVE into PPC_CELL_COMMON which are parts that are shared with the QPACE platform and the rest. Signed-off-by: Benjamin Krill <ben@codiert.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-10-30edac x38: new MC driver moduleHitoshi Mitake
I wrote a new module for Intel X38 chipset. This chipset is very similar to Intel 3200 chipset, but there are some different points, so I copyed i3200_edac.c and modified. This is Intel's web page describing this chipset. http://www.intel.com/Products/Desktop/Chipsets/X38/X38-overview.htm I've tested this new module with broken memory, and it seems to be working well. Signed-off-by: Hitoshi Mitake <mitake@clustcom.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25edac: i5100 new intel chipset driverArthur Jones
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29edac: new support for Intel 3100 chipsetAndrei Konovalov
Add Intel 3100 chipset support to e752x EDAC driver. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers/edac: i3000: 64bit buildJason Uhlenkott
Modified to run on x86_64 as well as x86 i3000_edac builds (and runs) fine on x86_64. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: add marvell mv64x60 driverDave Jiang
Marvell mv64x60 SoC support for EDAC. Used on PPC and MIPS platforms. Development and testing done on PPC Motorola prpmc2800 ATCA board. [akpm@linux-foundation.org: make mv64x60_ctl_name static] Signed-off-by: Dave Jiang <djiang@mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: add freescale mpc85xx driverDave Jiang
EDAC chip driver support for Freescale MPC85xx platforms. PPC based. Signed-off-by: Dave Jiang <djiang@mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07drivers-edac: add Cell MC driverBenjamin Herrenschmidt
Adds driver for the Cell memory controller when used without a Hypervisor such as on the IBM Cell blades. There might still be some improvements to do to this such as finding if it's possible to properly obtain more details about the address of the error but it's good enough already to report CE counts which is our main priority at the moment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26drivers/edac: fix pasemi kconfig dependsDoug Thompson
Fixed 'depends on PPC_PASEMI' in EDAC Kconfig. Module PASEMI depends ONLY on the PASEMI on PPC. Was previously enabled for ALL PPC Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Egor N. Martovetsky <egor@pasemi.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26edac is bust on mipsAndrew Morton
drivers/edac/edac_stub.c:15:22: asm/edac.h: No such file or directory was it even supposed to work? Cc: Douglas Thompson <dougthompson@xmission.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: new i82975x driverRanganathan Desikan
New EDAC driver for the i82975x memory controller chipset Used on ASUS motherboards [akpm@linux-foundation.org: fix multiple coding-style bloopers] Signed-off-by: <arvind@acarlab.com> Signed-off-by: Ranganathan Desikan <rdesikan@jetzbroadband.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: new pasemi driverEgor Martovetsky
NEW EDAC driver for the memory controllers on PA Semi PA6T-1682M. Changes since last submission: * Rebased on top of 2.6.22-rc4-mm2 with the EDAC changes merged there. * Minor checkpatch.pl cleanups * Renamed ctl_name * Added dev_name * edac_mc.h -> edac_core.h [akpm@linux-foundation.org: make printk more informative] Cc: Alan Cox alan@lxorguk.ukuu.org.uk Signed-off-by: Egor Martovetsky <egor@pasemi.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Thompson <dougthompson@xmission.com Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: add mips and ppc visibilityDouglas Thompson
1) Remove an old CVS ID string 2) change EDAC from a tristate option to a simple bool option 3) In addition to the X86 arch, PPC and MIPS also have drivers in the submission queue. This patch turns on the EDAC flag for those archs. Each driver will have its respective 'depends on ARCH' set. Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: add info kconfigDouglas Thompson
Kconfig - modified the help of EDAC Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: new inte 30x0 MC driverJason Uhlenkott
Here's a driver for the Intel 3000 and 3010 memory controllers, relative to today's Sourceforge code drop. This has only had light testing (I've yet to actually see it handle a memory error) but it detects my hardware correctly. Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: add new nmi rescanDave Jiang
Provides a way for NMI reported errors on x86 to notify the EDAC subsystem pending ECC errors by writing to a software state variable. Here's the reworked patch. I added an EDAC stub to the kernel so we can have variables that are in the kernel even if EDAC is a module. I also implemented the idea of using the chip driver to select error detection mode via module parameter and eliminate the kernel compile option. Please review/test. Thx! Also, I only made changes to some of the chipset drivers since I am unfamiliar with the other ones. We can add similar changes as we go. Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac-new-i82443bxgz-mc-driver: mark as brokenAndrew Morton
It will claim the PCI devices from under intel_agp.ko's feet. Greg is brewing some fix for that. Cc: Douglas Thompson <dougthompson@xmission.com> Cc: Tim Small <tim@buttersideup.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: new i82443bxgz MC driverTim Small
This is a NEW EDAC Memory Controller driver for the 440BX chipset (I82443BXGX) created and submitted by Timm Small Signed-off-by: Tim Small <tim@buttersideup.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19drivers/edac: new intel 5000 MC driverEric Wollesen
Eric Wollesen ported the Bluesmoke Memory Controller driver (written by Doug Thompson) for the Intel 5000X/V/P (Blackford/Greencreek) chipset to the in kernel EDAC model. This patch incorporates the module for the 5000X/V/P chipset family [m.kozlowski@tuxland.pl: edac i5000 parenthesis balance fix] Signed-off-by: Eric Wollesen <ericw@xmtp.net> Signed-off-by: Doug Thompson <norsk5@xmission.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Use menuconfig objects II - EDACJan Engelhardt
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10[S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-03-31[PATCH] edac_752x needs CONFIG_HOTPLUGRandy Dunlap
EDAC_752X uses pci_scan_single_device(), which is only available if CONFIG_HOTPLUG is enabled, so limit this driver with HOTPLUG. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Dave Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26[PATCH] EDAC: Kconfig dependency changesDave Peterson
- Add x86 dependency in drivers/edac/Kconfig for all current platform-specific modules. - Add PCI dependency to Radisys 82600 driver Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-09[PATCH] edac: mark as experimentalTim Small
EDAC is still causing a few problems and the code is relatively green. Mark it as experimental until thing settle down. Also, provide some documentation pointers in Kconfig help. Signed-off-by: Tim Small <tim@buttersideup.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[PATCH] x86_64: Remove rogue default y in EDAC KconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03[PATCH] EDAC config cleanupDave Jones
The AMD76x chipsets aren't used in 64-bit, so don't offer the driver to the user. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18[PATCH] EDAC: core EDAC support codeAlan Cox
This is a subset of the bluesmoke project core code, stripped of the NMI work which isn't ready to merge and some of the "interesting" proc functionality that needs reworking or just has no place in kernel. It requires no core kernel changes except the added scrub functions already posted. The goal is to merge further functionality only after the core code is accepted and proven in the base kernel, and only at the point the upstream extras are really ready to merge. From: doug thompson <norsk5@xmission.com> This converts EDAC to sysfs and is the final chunk neccessary before EDAC has a stable user space API and can be considered for submission into the base kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: doug thompson <norsk5@xmission.com> Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>