aboutsummaryrefslogtreecommitdiff
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2010-02-14firewire: ohci: retransmit isochronous transmit packets on cycle lossClemens Ladisch
In isochronous transmit DMA descriptors, link the skip address pointer back to the descriptor itself. When a cycle is lost, the controller will send the packet in the next cycle, instead of terminating the entire DMA program. There are two reasons for this: * This behaviour is compatible with the old IEEE1394 stack. Old applications would not expect the DMA program to stop in this case. * Since the OHCI driver does not report any uncompleted packets, the context would stop silently; clients would not have any chance to detect and handle this error without a watchdog timer. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Pieter Palmers notes: "The reason I added this retry behavior to the old stack is because some cards now and then fail to send a packet (e.g. the o2micro card in my dell laptop). I couldn't figure out why exactly this happens, my best guess is that the card cannot fetch the payload data on time. This happens much more frequently when sending large packets, which leads me to suspect that there are some contention issues with the DMA that fills the transmit FIFO. In the old stack it was a pretty critical issue as it resulted in a freeze of the userspace application. The omission of a packet doesn't necessarily have to be an issue. E.g. in IEC61883 streams the DBC field can be used to detect discontinuities in the stream. So as long as the other side doesn't bail when no [packet] is present in a cycle, there is not really a problem. I'm not convinced though that retrying is the proper solution, but it is simple and effective for what it had to do. And I think there are no reasons not to do it this way. Userspace can still detect this by checking the cycle the descriptor was sent in." Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, comment)
2010-02-01firewire: net: fix panic in fwnet_write_completeStefan Richter
In the transmit path of firewire-net (IPv4 over 1394), the following race condition may occur: - The networking soft IRQ inserts a datagram into the 1394 async request transmit DMA. - The 1394 async transmit completion tasklet runs to finish cleaning up (unlink datagram from list of pending ones, release skb and outbound 1394 transaction object) --- before the networking soft IRQ had a chance to proceed and add the datagram to the list of pending datagrams. This caused a panic in the 1394 async transmit completion tasklet when it dereferenced unitialized list heads: http://bugzilla.kernel.org/show_bug.cgi?id=15077 The fix is to add checks in the tx soft IRQ and in the tasklet to determine which of these two is the last referrer to the transaction object. Then handle the cleanup of the object by the last referrer rather than assuming that the tasklet is always the last one. There is another similar race: Between said tasklet and fwnet_close, i.e. at ifdown. However, that race is much less likely to occur in practice and shall be fixed in a separate update. Reported-by: Илья Басин <basinilya@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-27firewire: ohci: fix crashes with TSB43AB23 on 64bit systemsStefan Richter
Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26firewire: core: fix use-after-free regression in FCP handlerStefan Richter
Commit db5d247a "firewire: fix use of multiple AV/C devices, allow multiple FCP listeners" introduced a regression into 2.6.33-rc3: The core freed payloads of incoming requests to FCP_Request or FCP_Response before a userspace driver accessed them. We need to copy such payloads for each registered userspace client and free the copies according to the lifetime rules of non-FCP client request resources. (This could possibly be optimized by reference counts instead of copies.) The presently only kernelspace driver which listens for FCP requests, firedtv, was not affected because it already copies FCP frames into an own buffer before returning to firewire-core's FCP handler dispatcher. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-01-26firewire: core: add_descriptor size checkStefan Richter
Presently, firewire-core only checks whether descriptors that are to be added by userspace drivers to the local node's config ROM do not exceed a size of 256 quadlets. However, the sum of the bare minimum ROM plus all descriptors (from firewire-core, from firewire-net, from userspace) must not exceed 256 quadlets. Otherwise, the bounds of a statically allocated buffer will be overwritten. If the kernel survives that, firewire-core will subsequently be unable to parse the local node's config ROM. (Note, userspace drivers can add descriptors only through device files of local nodes. These are usually only accessible by root, unlike device files of remote nodes which may be accessible to lesser privileged users.) Therefore add a test which takes the actual present and required ROM size into account for all descriptors of kernelspace and userspace drivers. Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire, ieee1394: update Kconfig helpStefan Richter
Update the Kconfig help texts of both stacks to encourage a general move from the older to the newer drivers. However, do not label ieee1394 as "Obsolete" yet, as the newer drivers have not been deployed as default stack in the majority of Linux distributions yet, and those who start doing so now may still want to install the old drivers as fallback for unforeseen issues. Since Linux 2.6.32, FireWire audio devices can be driven by the newer firewire driver stack too, hence remove an outdated comment about audio devices. Also remove comments about library versions since the 2nd generation of libraw1394 and libdc1394 is now in common use; details on library versions can be read at the wiki link from the help texts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: ohci: always use packet-per-buffer mode for isochronous receptionStefan Richter
This is a minimal change meant for the short term: Never set the ohci->use_dualbuffer flag to true. There are two reasons to do so: - Packet-per-buffer mode and dual-buffer mode do not behave the same under certain circumstances, notably if several packets are covered by a single fw_cdev_iso_packet descriptor. http://marc.info/?l=linux1394-devel&m=124965653718313 Therefore the driver stack should not silently choose one or the other mode but should leave the choice to the high-level driver (regardless if kernel driver or userspace driver). Or simply always only offer packet-per-buffer mode, since a considerable number of controllers, even current ones, does not offer dual-buffer support. - Even under circumstances where packet-per-buffer mode and dual-buffer mode behave exactly the same --- notably when used through libraw1394, libdc1394, as well as the current two kernel drivers which use isochronous reception (firewire-net and firedtv) --- we are still faced with the problem that several OHCI 1.1 controllers have bugs in dual-buffer mode. Although it looks like we have identified most of those buggy controllers by now, we cannot be quite sure about that. So, use packet-per-buffer by default from now on. This change should be followed up by a more complete solution: Either extend the in-kernel API and the userspace ABI by a choice between the two IR modes or remove all dual-buffer related code from firewire-ohci. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: cdev: fix another memory leak in an error pathStefan Richter
If copy_from_user in an FW_CDEV_IOC_SEND_RESPONSE ioctl failed, the fw_request pointed to by the inbound_transaction_resource is no longer referenced and needs to be freed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-12-29firewire: fix use of multiple AV/C devices, allow multiple FCP listenersClemens Ladisch
Control of more than one AV/C device at once --- e.g. camcorders, tape decks, audio devices, TV tuners --- failed or worked only unreliably, depending on driver implementation. This affected kernelspace and userspace drivers alike and was caused by firewire-core's inability to accept multiple registrations of FCP listeners. The fix allows multiple address handlers to be registered for the FCP command and response registers. When a request for these registers is received, all handlers are invoked, and the Firewire response is generated by the core and not by any handler. The cdev API does not change, i.e., userspace is still expected to send a response for FCP requests; this response is silently ignored. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (changelog, rebased, whitespace)
2009-12-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: handle receive packets with a data length of zero
2009-12-11firewire: ohci: handle receive packets with a data length of zeroJay Fenlason
Queueing to receive an ISO packet with a payload length of zero silently does nothing in dualbuffer mode, and crashes the kernel in packet-per-buffer mode. Return an error in dualbuffer mode, because the DMA controller won't let us do what we want, and work correctly in packet-per-buffer mode. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: stable@kernel.org
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: Use hweight32 firewire: cdev: reduce stack usage by ioctl_dispatch firewire: ohci: 0 may be a valid DMA address firewire: core: WARN on wrong usage of core transaction functions firewire: core: optimize Topology Map creation firewire: core: clarify generate_config_rom usage firewire: optimize config ROM creation firewire: cdev: normalize variable names firewire: normalize style of queue_work wrappers firewire: cdev: fix memory leak in an error path
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: pass correct iso xmit timestamps to core firewire: ohci: Make cycleMatch ISO transmission work
2009-11-21firewire: ohci: pass correct iso xmit timestamps to coreJay Fenlason
Here is the final set of patches I used to get ffado to work with the new firewire stack. With these patches, I was able to start ardour and record from and playback to my PreSonus Inspire1394 from a (mostly) Fedora 12 system. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Until now, firewire-ohci exposed only the transmit cycle of the last transmitted packet at each isochronous transmit complete event. This made it impossible for FFADO (FireWire audio drivers in userspace) to synchronize audio-out streams. The fix is to store the timestamp of each packet in the iso xmit event. As a bonus, the transfer status is stored too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-11-18firewire: ohci: Make cycleMatch ISO transmission workJay Fenlason
Calling the START_ISO ioctl with a nonnegative cycle paramater has never worked. Last night I got around to figuring out why. Most of this patch is a big comment explaining why we enable an interrupt source then don't actually do anything when we get one. As the comment says, we should do more, but we don't have a way to tell userspace what happened. . . Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited comment)
2009-10-31firewire: cdev: reduce stack usage by ioctl_dispatchStefan Richter
Replace a hardcoded buffer size by a sizeof union {}. This shrinks the stack-allocated ioctl argument buffer from 256 to 40 bytes. (This is not much, but subsequent stack usage particularly by the queue_iso ioctl handler adds up.) The new form is also easier to keep up to date than a hardcoded size if more ioctls are added. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31firewire: ohci: 0 may be a valid DMA addressStefan Richter
I was told that there are obscure architectures with non-coherent DMA which may DMA-map to bus address 0. We shall not use 0 as a magic number of uninitialized bus address variables. The packet->payload_length > 0 test cannot be used either (except in at_context_queue_packet) because local requests are not DMA-mapped regardless of payload_length. Hence add a state flag to struct fw_packet. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-31firewire: core: WARN on wrong usage of core transaction functionsStefan Richter
In the code path which creates request packets, clearly mark a switch branch which must never be reached with a WARN. In the code path which creates response packets, replace a BUG by a friendlier to debug WARN. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: provide fallback if mgt_ORB_timeout is missing ieee1394: add documentation entry to MAINTAINERS ieee1394: update URLs in debugging-via-ohci1394.txt
2009-10-14firewire: core: optimize Topology Map creationStefan Richter
The Topology Map of the local node was created in CPU byte order, then a temporary big endian copy was created to compute the CRC, and when a read request to the Topology Map arrived it had to be converted to big endian byte order again. We now generate it in big endian byte order in the first place. This also rids us of 1000 bytes stack usage in tasklet context. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: core: clarify generate_config_rom usageStefan Richter
Move the static config ROM buffer into the scope of the two callers of generate_config_rom(). That way the ROM length can be passed over as return value rather than through a pointer argument. It also becomes more obvious that accesses to the config ROM buffer have to be serialized and how this is accomplished. And firewire-core.ko shrinks a bit as well. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: optimize config ROM creationStefan Richter
The config ROM image of the local node was created in CPU byte order, then a temporary big endian copy was created to compute the CRC, and finally the card driver created its own big endian copy. We now generate it in big endian byte order in the first place to avoid one byte order conversion and the temporary on-stack copy of the ROM image (1000 bytes stack usage in process context). Furthermore, two 1000 bytes memset()s are replaced by one 1000 bytes - ROM length sized memset. The trivial fw_memcpy_{from,to}_be32() helpers are now superfluous and removed. The newly added __compute_block_crc() function will be folded into fw_compute_block_crc() in a subsequent change. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: cdev: normalize variable namesStefan Richter
Unify some names: - "e" for pointers to subtypes of struct event, - "event" for struct members and pointers to struct event, - "r" for pointers to subtypes of struct client_resource, - "resource" for struct members and pointers to struct client_resource, - other names for struct members and pointers to other types. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: normalize style of queue_work wrappersStefan Richter
A few stylistic changes to unify some code patterns in the subsystem: - The similar queue_delayed_work helpers fw_schedule_bm_work, schedule_iso_resource, and sbp2_queue_work now have the same call convention. - Two conditional calls of schedule_iso_resource are factored into another small helper. - An sbp2_target_get helper is added as counterpart to sbp2_target_put. Object size of firewire-core is decreased a little bit, object size of firewire-sbp2 remains unchanged. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: sbp2: provide fallback if mgt_ORB_timeout is missingStefan Richter
The Unit_Characteristics entry of an SBP-2 unit directory is not mandatory as far as I can tell. If it is missing, we would probably fail to log in into the target because firewire-sbp2 would not wait for status after it sent the login request. The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it is executed exactly once before login, rather than 0..n times depending on the target's config ROM. With targets with one or more Unit_Characteristics entries, the result is the same as before. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-14firewire: cdev: fix memory leak in an error pathStefan Richter
If copy_from_user in an FW_CDEV_IOC_SEND_RESPONSE ioctl failed, an inbound_transaction_resource instance is no longer referenced and needs to be freed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-04headers: remove sched.h from poll.hAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: remove a workaround for Momobay FX-3A firewire: sbp2: remove a workaround for Momobay FX-3A firewire: sbp2: fix status reception firewire: core: fix topology map response handler firewire: core: fix race with parallel PCI device probe firewire: core: header file cleanup firewire: ohci: fix Self ID Count register mask (safeguard against buffer overflow) ieee1394: raw1394: Do not leak memory on failed trylock.
2009-09-15driver model: constify attribute groupsDavid Brownell
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
2009-09-12firewire: sbp2: remove a workaround for Momobay FX-3AStefan Richter
The inquiry delay does more harm than good in tests on a recent kernel. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: sbp2: fix status receptionStefan Richter
Per SBP-2 clause 5.3, a target shall store 8...32 bytes of status information. Trailing zeros after the first 8 bytes don't need to be stored, they are implicit. Fix the status write handler to clear all unwritten status data. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: core: fix topology map response handlerStefan Richter
This register is 1 kBytes large. Adjust topology_map.length to prevent registration of other response handlers in this region and to make sure that we respond to requests to the upper half of the register. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: core: fix race with parallel PCI device probeStefan Richter
The config ROM buffer received from generate_config_rom is a globally shared static buffer. Extend the card_mutex protection in fw_add_card until after the config ROM was copied into the card driver's buffer. Otherwise, parallelized card driver probes may end up with ROM contents that were meant for a different card. firewire-ohci's card->driver->enable hook is safe to be called within the card_mutex. Furthermore, it is safe to reorder card_list update versus card enable, which simplifies the code a little. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: core: header file cleanupStefan Richter
fw_card_get, fw_card_put, fw_card_release are currently not exported for use outside the firewire-core. Move their definitions/ declarations from the subsystem header file to the core header file. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: ohci: fix Self ID Count register mask (safeguard against buffer ↵Stefan Richter
overflow) The selfIDSize field of Self ID Count is 9 bits wide, and we are only interested in the high 8 bits. Fix the mask accordingly. The previously too large mask didn't do damage though because the next few bits in the register are reserved and therefore zero with presently existing hardware. Also, check for the maximum possible self ID count of 252 (according to OHCI 1.1 clause 11.2 and IEEE 1394a-2000 clause 4.3.4.1, i.e. up to four self IDs of up to 63 nodes, even though IEEE 1394 up to edition 2008 defines only up to three self IDs per node). More than 252 self IDs would only happen if the self ID receive DMA unit malfunctioned, which would likely be caught by other self ID buffer checks. However, check it early to be sure. More than 253 quadlets would overflow the Topology Map CSR. Reported-By: PaX Team Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix freeing of unallocated memory firewire: ohci: fix Ricoh R5C832, video reception firewire: ohci: fix Agere FW643 and multiple cameras firewire: core: fix crash in iso resource management
2009-09-05firewire: sbp2: fix freeing of unallocated memoryStefan Richter
If a target writes invalid status (typically status of a command that already timed out), firewire-sbp2 attempts to put away an ORB that doesn't exist. https://bugzilla.redhat.com/show_bug.cgi?id=519772 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: ohci: fix Ricoh R5C832, video receptionStefan Richter
In dual-buffer DMA mode, no video frames are ever received from R5C832 by libdc1394. Fallback to packet-per-buffer DMA works reliably. http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476 Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: ohci: fix Agere FW643 and multiple camerasStefan Richter
An Agere FW643 OHCI 1.1 card works fine for video reception from one camera but fails early if receiving from two cameras. After a short while, no IR IRQ events occur and the context control register does not react anymore. This happens regardless whether both IR DMA contexts are dual-buffer or one is dual-buffer and the other packet-per-buffer. This can be worked around by disabling dual buffer DMA mode entirely. http://sourceforge.net/mailarchive/message.php?msg_name=4A7C0594.2020208%40gmail.com (Reported by Samuel Audet.) In another report (by Jonathan Cameron), an FW643 works OK with two cameras in dual buffer mode. Whether this is due to different chip revisions or different usage patterns (different video formats) is not yet clear. However, as far as the current capabilities of firewire-core's isochronous I/O interface are concerned, simply switching off dual-buffer on non-working and working FW643s alike is not a problem in practice. We only need to revisit this issue if we are going to enhance the interface, e.g. so that applications can explicitly choose modes. Reported-by: Samuel Audet <samuel.audet@gmail.com> Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: core: fix crash in iso resource managementStefan Richter
This fixes a regression due to post 2.6.30 commit "firewire: core: do not DMA-map stack addresses" 6fdc03709433ccc2005f0f593ae9d9dd04f7b485. As David Moore noted, a previously correct sizeof() expression became wrong since the commit changed its argument from an array to a pointer. This resulted in an oops in ohci_cancel_packet in the shared workqueue thread's context when an isochronous resource was to be freed. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-02drivers: Kill now superfluous ->last_rx storesEric Dumazet
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02netdev: drivers should make ethtool_ops constStephen Hemminger
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert pseudo drivers to netdev_tx_tStephen Hemminger
These are all drivers that don't touch real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: core: do not DMA-map stack addresses
2009-07-02firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)Stefan Richter
Increase the command ORB data structure to transport up to 16 bytes long CDBs (instead of 12 bytes), and tell the SCSI mid layer about it. This is notably necessary for READ CAPACITY(16) and friends, i.e. support of large disks. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-25firewire: core: do not DMA-map stack addressesStefan Richter
The DMA mapping API cannot map on-stack addresses, as explained in Documentation/DMA-mapping.txt. Convert the two cases of on-stack packet payload buffers in firewire-core (payload of lock requests in the bus manager work and in iso resource management) to slab-allocated memory. There are a number on-stack buffers for quadlet write or quadlet read requests in firewire-core and firewire-sbp2. These are harmless; they are copied to/ from card driver internal DMA buffers since quadlet payloads are inlined with packet headers. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>