aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2008-10-23drm: fix leak of cliprects in drm_rmdraw()Zhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23i915: Disable MSI on GM965 (errata says it doesn't work)Keith Packard
Current Intel errata for the GM965 says that using MSI may cause interrupts to be delayed or lost. The only workaround offered is to not use it. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23drm: Set cliprects to NULL when changing drawable to having 0 cliprects.Zhenyu Wang
This avoids setting the cliprects pointer to a zero-sized allocation. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-23i915: Protect vblank IRQ reg access with spinlockKeith Packard
This uses the same spinlock as the user_irq code as it shares the same register, ensuring that interrupt registers are updated atomically. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm/i915: fix ioremap of a user address for non-root (CVE-2008-3831)Matthias Hopf
Olaf Kirch noticed that the i915_set_status_page() function of the i915 kernel driver calls ioremap with an address offset that is supplied by userspace via ioctl. The function zeroes the mapped memory via memset and tells the hardware about the address. Turns out that access to that ioctl is not restricted to root so users could probably exploit that to do nasty things. We haven't tried to write actual exploit code though. It only affects the Intel G33 series and newer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: make CONFIG_DRM depend on CONFIG_SHMEM.Dave Airlie
This can be removed later when DRM doesn't depend on shmem. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18radeon: fix PCI bus mastering support enables.Alex Deucher
Someone noticed these registers moved around for later chips, so we redo the codepaths per-chip. PCIE chips don't appear to require explicit enables. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18radeon: add RS400 family support.Alex Deucher
This adds support for the RS400 family of IGPs for Intel CPUs. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm/radeon: add support for RS740 IGP chipsets.Alex Deucher
This adds support for the HS2100 IGP chipset. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: GM45 has GM965-style MCH setup.Eric Anholt
Fixes tiling swizzling mode failures that manifest in glReadPixels(). Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Don't run retire work handler while suspendedKeith Packard
At leavevt and lastclose time, cancel any pending retire work handler invocation, and keep the retire work handler from requeuing itself if it is currently running. This patch restructures i915_gem_idle to perform all of these tasks instead of having both leavevt and lastclose call a sequence of functions. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Map status page cached for chips with GTT-based HWS location.Keith Packard
This should improve performance by avoiding uncached reads by the CPU (the point of having a status page), and may improve stability. This patch only affects G33, GM45 and G45 chips as those are the only ones using GTT-based HWS mappings. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Fix up ring initialization to cover G45 odditiesKeith Packard
G45 appears quite sensitive to ring initialization register writes, sometimes leaving the HEAD register with the START register contents. Check to make sure HEAD is reset correctly when START is written, and fix it up, screaming loudly. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Use non-reserved status page index for breadcrumbKeith Packard
Dwords 0 through 0x1f are reserved for use by the hardware. Move the GEM breadcrumb from 0x10 to 0x20 to keep out of this area. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: Increment dev_priv->irq_received so i915_gem_interrupts count works.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: kill drm_device->irqJesse Barnes
Like the last patch but adds a macro to get at the irq value instead of dereferencing pdev directly. Should make things easier for the BSD guys and if we ever support non-PCI devices. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: wbinvd is cache coherent.Dave Airlie
doing an ipi for the wbinvd case isn't necessary. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: add missing return in error path.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: fixup permissions on gem ioctls.Dave Airlie
init/entervt/leavevt should be root-only master ioctls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: Clean up many sparse warnings in i915.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: Use ioremap_wc in i915_driver instead of ioremap, since we always want WC.Eric Anholt
Fixes failure to map the ringbuffer when PAT tells us we don't get to do uncached on something that's already mapped WC, or something along those lines. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: G33-class hardware has a newer 965-style MCH (no DCC register).Eric Anholt
Fixes bad software fallback rendering in Mesa in dual-channel configurations. d9a2470012588dc5313a5ac8bb2f03575af00e99 Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: Avoid oops in GEM execbuffers with bad arguments.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18DRM: Return -EBADF on bad object in flink, and return curent name if it exists.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915 gem: install and uninstall irq handler in entervt and leavevt ioctls.Kristian Høgsberg
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Make use of sarea_priv conditional.Kristian Høgsberg
We fail ioctls that depend on the sarea_priv with EINVAL. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Use struct_mutex to protect ring in GEM mode.Eric Anholt
In the conversion for GEM, we had stopped using the hardware lock to protect ring usage, since it was all internal to the DRM now. However, some paths weren't converted to using struct_mutex to prevent multiple threads from concurrently working on the ring, in particular between the vblank swap handler and ioctls. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Add chip set ID param.Kristian Høgsberg
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: Add GEM ("graphics execution manager") to i915 driver.Eric Anholt
GEM allows the creation of persistent buffer objects accessible by the graphics device through new ioctls for managing execution of commands on the device. The userland API is almost entirely driver-specific to ensure that any driver building on this model can easily map the interface to individual driver requirements. GEM is used by the 2d driver for managing its internal state allocations and will be used for pixmap storage to reduce memory consumption and enable zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: Rework vblank-wait handling to allow interrupt reduction.Jesse Barnes
Previously, drivers supporting vblank interrupt waits would run the interrupt all the time, or all the time that any 3d client was running, preventing the CPU from sleeping for long when the system was otherwise idle. Now, interrupts are disabled any time that no client is waiting on a vblank event. The new method uses vblank counters on the chipsets when the interrupts are turned off, rather than counting interrupts, so that we can continue to present accurate vblank numbers. Co-author: Michel Dänzer <michel@tungstengraphics.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm/cred: wrap task credential accesses in the drm driver.David Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: David Airlie <airlied@redhat.com>
2008-10-18new chip name is GM45Jesse Barnes
Author: Zhenyu Wang <zhenyu.z.wang@intel.com> i915: official name for GM45 chipset Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18separate i915 suspend/resume functions into their own fileJesse Barnes
[Patch against drm-next. Consider this a trial balloon for our new Linux development model.] This is a big chunk of code. Separating it out makes it easier to change without churn on the main i915_drv.c file (and there will be churn as we fix bugs and add things like kernel mode setting). Also makes it easier to share this file with BSD. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18radeon: fix writeback across suspend/resume.Dave Airlie
Make writeback not get disabled on resume. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18drm: fix sysfs error path.Dave Airlie
Pointed out by Roel Kluin on dri-devel. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18FB_SIS=m, DRM_SIS=y is not a legal configuration.Adrian Bunk
Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18Add Intel ACPI IGD OpRegion supportMatthew Garrett
This adds the support necessary for allowing ACPI backlight control to work on some newer Intel-based graphics systems. Tested on Thinkpad T61 and HP 2510p hardware. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-10-18i915: Initialize hardware status page at device load when possible.Keith Packard
Some chips were unstable with repeated setup/teardown of the hardware status page. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Track progress inside of batchbuffers for determining wedgedness.Keith Packard
This avoids early termination for long-running commands. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Add support for MSI and interrupt mitigation.Eric Anholt
Previous attempts at interrupt mitigation had been foiled by i915_wait_irq's failure to update the sarea seqno value when the status page indicated that the seqno had already been passed. MSI support has been seen to cut CPU costs by up to 40% in some workloads by avoiding other expensive interrupt handlers for frequent graphics interrupts. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Use more consistent names for regs, and store them in a separate file.Jesse Barnes
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: Ignore X server provided mmio addressKeith Packard
It is already correctly detected by the kernel for use in suspend/resume. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18i915: remove settable use_mi_batchbuffer_startKeith Packard
The driver can know what hardware requires MI_BATCH_BUFFER vs MI_BATCH_BUFFER_START; there's no reason to let user mode configure this. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18SiS DRM: fix a pointer cast warningDavid Howells
Fix a pointer cast warning in the SIS DRM code. This was introduced in patch ce65a44de07f73ceda1749812b75086b7add408d. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18SiS DRM: fix the memory allocator if the SIS FB is built as a moduleDavid Howells
Fix the SIS DRM memory allocator if the SIS FB built as a module. The SIS DRM code initialises the mm allocation hooks, but _only_ if the SIS FB is not built as a module because it depends on CONFIG_FB_SIS, and that's unset if the SIS FB is not built in. It must check CONFIG_FB_SIS_MODULE as well. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-16misc: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-01drm/radeon: downgrade debug message from info to debug.Dave Airlie
If this triggers its bad, however some machines seem to have been triggering it for ages and we didn't know until we added the debug. So downgrade the debug now so people don't call this a regression. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-27Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: don't set the signal blocker on the master process. drm: don't call the vblank tasklet with irqs disabled. r300: Fix cliprect emit drm/radeon: r300_cmdbuf: Always emit INDX_BUFFER immediately after DRAW_INDEX radeon: fix some hard lockups on r3/4/500s
2008-08-25drm: don't set the signal blocker on the master process.Dave Airlie
There is a problem with debugging the X server and gdb crashes in the xkb startup code. This avoids the problem by allowing the master process to get signals. It should be safe as the signal blocker is mainly so that you can Ctrl-Z a 3D application without locking up the whole box. Ctrl-Z the X server isn't something many people do. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-08-25drm: don't call the vblank tasklet with irqs disabled.Thomas Hellstrom
If a specific tasklet shares data with irq context, it needs to take a private irq-blocking spinlock within the tasklet itself. Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-25 07:57:55 +0000