aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2009-04-03drm/radeon: load the right microcode on rs780Alex Deucher
Copy/paste error. The RV670 microcode should work ok, so it's not a show stopper. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03Merge branch 'drm-intel-next' of ../anholt-2.6 into drm-linusDave Airlie
2009-04-03drm: remove unused "can_grow" parameter from drm_crtc_helper_initial_configJesse Barnes
Cleanup some leftovers from the X port. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03drm: fix EDID backward compat checkJesse Barnes
EDIDs should be backward compatible, so don't bail if we see a version of 3 (which is out there now) and print a message if we see something newer, but allow it to be parsed. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03drm: sync the mode validation for INTERLACE/DBLSCANyakui_zhao
Check whether the INTERLACE/DBLSCAN is supported by output device. If not, the mode containing the flag of INTERLACE/DBLSCAN will be marked as unsupported. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03drm: fix typo in edid vendor parsing.Dave Airlie
Should be, edid_vendor[2] = (edid->mfg_id[1] & 0x1f) + '@'; Since vendor ID has only two bytes only, I am somewhat surprised why gcc doesn't complain this. Reported-by: Guo, Chaohong <chaohong.guo@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-02drm: Use pgprot_writecombine in GEM GTT mapping to get the right bits for !PAT.Jesse Barnes
Otherwise, the PAGE_CACHE_WC would end up getting us a UC-only mapping, and the write performance of GTT maps dropped 10x. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [anholt: cleaned up unused var] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: Add a spinlock to protect the active_listCarl Worth
This is a baby-step in the direction of having finer-grained locking than the struct_mutex. Specifically, this will enable new debugging code to read the active list for printing out GPU state when the GPU is wedged, (while the struct_mutex is held, of course). Signed-off-by: Carl Worth <cworth@cworth.org> [anholt: indentation fix] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: Fix SDVO TV supportZhenyu Wang
This brings SDVO TV support from 2D driver, including origin fix f1ca56e17d0 and later fix 2fcf4fcccfe. Also fix wrong modeline definitions for SDVO TV. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: Fix SDVO CREATE_PREFERRED_INPUT_TIMING commandZhenyu Wang
This brings fix commit acde0ef683 from 2D driver. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: Fix error in SDVO DTD and modeline convertZhenyu Wang
This brings fix commit 62c0c2f5549a from 2D driver. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: Fix SDVO command debug functionZhenyu Wang
Fix compile error of intel_sdvo_debug_response(), and explicit use KERN_DEBUG for printk. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: fix TV mode setting in property changeZhenyu Wang
Only set TV DAC in property change seems doesn't work, we have to setup whole crtc pipe which assigned to TV alone. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> [anholt: Note that this should also fix the oops at startup with new 2D] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: only set TV mode when any property changedZhenyu Wang
If there's no real property change, don't need to set TV mode again. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> [anholt: checkpatch.pl fix] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: clean up udelay usageArjan van de Ven
udelay() of 20 milliseconds really ought to just use mdelay(), that avoids the various wrap scenarios and also is more readable Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: add VGA hotplug support for 945+Jesse Barnes
Add VGA port hotplug detection to the i915 driver. When KMS is enabled, plugging in or removing a VGA cable from the VGA connector will generate a uevent, which indicates to userspace that it should re-probe outputs on this device (to determine modes, etc.). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [anholt: dropped extra PORT_HOTPLUG_STAT clear with ack from jbarnes] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: correctly set IGD device's gtt size for KMS.Shaohua Li
IGD device only has last 1 page used by GTT. This should match the AGP gart code. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: avoid hanging on to a stale pointer to raw_edid.Ma Ling
drm_get_edid will store edid into raw_edid, so when freeing edid memory, at the same time clean raw_edid pointer. Signed-off-by: Ma Ling <ling.ma@intel.com> [anholt: Note that raw_edid is not currently used anywhere] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: check for -EINVAL from vm_insert_pfnJesse Barnes
Indicates something is wrong with the mapping; and apparently triggers in current kernels. Signed-off-by: Jesse Barnes <jbarnes@virtuosugeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-01drm/i915: fix up tiling/fence reg setup on i8xx class hwDaniel Vetter
This fixes all the tiling problems with the 2d ddx. glxgears still doesn't work. Changes: - fix a copy&paste error in i8xx fence reg setup. It resulted in an at most a 512KB offset of the fence reg window, so was only visible sometimes. - add tests for stride and object size constrains (also for i915 and 1965 class hw). Userspace seems to have an of-by-one bug there, which changes the fence size by at most 512KB due to an overflow. - because i8xx hw is quite old (and therefore not as well-tested) I left 2 debug WARN_ONs in the i8xx fence reg setup code to hopefully catch any further overflows in the bit-fields. Lastly there's one small change to make the alignment checks more consistent. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=20289 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-29drm: detect hdmi monitor by hdmi identifier (v3)Ma Ling
Sometime we need to communicate with HDMI monitor by sending audio or video info frame, so we have to know monitor type. However if user utilize HDMI-DVI adapter to connect DVI monitor, hardware detection will incorrectly show the monitor is HDMI. HDMI spec tell us that any device containing IEEE registration Identifier will be treated as HDMI device. The patch intends to detect HDMI monitor by this rule. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm: drm_fops.c unlock missing on error pathDan Carpenter
drm_open_helper() from drm_fops.c had a missing mutex_unlock in a error path. This was caught by smatch (http://repo.or.cz/w/smatch.git/). Compile tested. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm: read EDID extensions from monitorMa Ling
Usually drm read basic EDID, that is enough for us, but since igital display were introduced i.e. HDMI monitor, sometime we need to interact with monitor by EDID extension information, EDID extensions include audio/video data block, speaker allocation and vendor specific data blocks. This patch intends to read EDID extensions from digital monitor for users. Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm: Use a little stash on the stack to avoid kmalloc in most DRM ioctls.Eric Anholt
The kmalloc was taking up about 1.5% of the CPU on an ioctl-heavy workload (x11perf -aa10text on 965). Initial results look like they have a corresponding improvement in performance for aa10text, but more numbers might not hurt. Thanks to ajax for pointing out this performance regression I'd introduced back in 2007. [airlied: well I introduced it sneakily inside Eric's patch] Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29drm/radeon: add regs required for occlusion queries supportMaciej Cencora
[airlied: cleaned up slightly for drm-next] Signed-off-by: Maciej Cencora <m.cencora@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-28drm/i915: check the return value from the copy from userDave Airlie
This produced a warning on my build, not sure why super-warning-man didn't notice this one, its much worse than the %z one. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-28drm: merge Linux master into HEADDave Airlie
Conflicts: drivers/gpu/drm/drm_info.c drivers/gpu/drm/drm_proc.c drivers/gpu/drm/i915/i915_gem_debugfs.c
2009-03-28Merge branch 'linus' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/sparc/kernel/time_64.c drivers/gpu/drm/drm_proc.c Manual merge to resolve build warning due to phys_addr_t type change on x86: drivers/gpu/drm/drm_info.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27i915: fix wrong 'size_t' format stringLinus Torvalds
For the fifteen bazillionth time. See also commits f06da264cfb0f9444d41ca247213e419f90aa72a and aeb565dfc3ac4c8b47c5049085b4c7bfb2c7d5d7 ("i915: Fix more size_t format string warnings" and "Fix annoying DRM_ERROR() string warning"). Grr-target: Eric Anholt <eric@anholt.net> Grr-target: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27drm/i915: Fix LVDS dither settingLi Peng
Update bdb_lvds_options structure according to its defination in 2D driver. Then we can parse and set 'lvds_dither' bit correctly on non-965 chips. Signed-off-by: Li Peng <peng.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Check for dev->primary->master before dereference.Chris Wilson
I've hit the occasional oops inside i915_wait_ring() with an indication of a NULL derefence of dev->primary->master. Adding a NULL check is consistent with the other potential users of dev->primary->master. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: TV detection fixZhenyu Wang
Check that the encoder has a real enabled crtc for TV detect, and fix missing TV type setting after detect. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: TV mode_set sync up with 2D driverZhenyu Wang
Fix TV control save register for untouched bits, and color knobs different definition for 945 and 965 chips. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Fix TV get_modes to return modes countZhenyu Wang
The get_modes hook must return the number of modes added. This also fixes TV mode's clock calculation int overflow issue, and use 0.01 precision for mode refresh validation. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Sync crt hotplug detection with intel video driverZhao Yakui
This covers: Use long crt hotplug activation time on GM45. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Sync mode_valid/mode_set with intel video driverZhao Yakui
This covers: Limit CRT DAC speed better. and also clears the border color in case it's set to some garbage, which would fix ugly outlines in the blank regions of the CRT. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> [anholt: replaced *drm_dev with *dev] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: TV modes' parameters sync up with 2D driverZhenyu Wang
This covers at least: TV: subcarrier fix for NTSC and PAL TV: fix timing parameters for PAL, 480p, 1080i Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27agp/intel: Add support for new intel chipset.Shaohua Li
This is a G33-like desktop and mobile chipset. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27i915/drm: Remove two redundant agp_chipset_flushesOwain G. Ainsworth
agp_chipset_flush() is for flushing the intel GMCH write cache via the IFP, these two uses are for when we're getting the object into the cpu READ domain, and thus should not be needed. This confused me when I was getting my head around the code. With thanks to airlied for helping me check my mental picture of how the flushes and clflushes are supposed to be used. Signed-off-by: Owain G. Ainsworth <oga@openbsd.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Display fence register state in debugfs i915_gem_fence_regs node.Chris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Add information on pinning and fencing to the i915 list debug.Eric Anholt
This was inspired by a patch by Chris Wilson, though none of it applied in any way due to the debugfs work and I decided to change the formatting of the new information anyway. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Consolidate gem object list dumpingBen Gamari
Here we eliminate a few functions in favor of using a single function to dump from all of the object lists. Signed-Off-By: Ben Gamari <bgamari@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Convert i915 proc files to seq_file and move to debugfs.Ben Gamari
Signed-off-by: Ben Gamari <bgamari@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm: Convert proc files to seq_file and introduce debugfsBen Gamari
The old mechanism to formatting proc files is extremely ugly. The seq_file API was designed specifically for cases like this and greatly simplifies the process. Also, most of the files in /proc really don't belong there. This patch introduces the infrastructure for putting these into debugfs and exposes all of the proc files in debugfs as well. Signed-off-by: Ben Gamari <bgamari@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27drm/i915: Fix lock order reversal in GEM relocation entry copying.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Keith Packard <keithp@keithp.com>
2009-03-27drm/i915: Fix lock order reversal with cliprects and cmdbuf in non-DRI2 paths.Eric Anholt
This introduces allocation in the batch submission path that wasn't there previously, but these are compatibility paths so we care about simplicity more than performance. kernel.org bug #12419. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Keith Packard <keithp@keithp.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Fix lock order reversal in shmem pread path.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Fix lock order reversal in shmem pwrite path.Eric Anholt
Like the GTT pwrite path fix, this uses an optimistic path and a fallback to get_user_pages. Note that this means we have to stop using vfs_write and roll it ourselves. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Make GEM object's page lists refcounted instead of get/free.Eric Anholt
We've wanted this for a few consumers that touch the pages directly (such as the following commit), which have been doing the refcounting outside of get/put pages. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-27drm/i915: Fix lock order reversal in GTT pwrite path.Eric Anholt
Since the pagefault path determines that the lock order we use has to be mmap_sem -> struct_mutex, we can't allow page faults to occur while the struct_mutex is held. To fix this in pwrite, we first try optimistically to see if we can copy from user without faulting. If it fails, fall back to using get_user_pages to pin the user's memory, and map those pages atomically when copying it to the GPU. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 23:36:42 +0000