aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2010-03-15drm/nouveau: add module option to disable TV detectionBen Skeggs
Intended to be used as a workaround in cases where we falsely detect that a TV is connected when it's not. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-15drm/nouveau: Never evict VRAM buffers to system.Francisco Jerez
VRAM->system is a synchronous operation: it involves scheduling a VRAM->TT DMA transfer and stalling the CPU until it's finished so that we can unbind the new memory from the translation tables. VRAM->TT can always be performed asynchronously, even if TT is already full and we have to move something out of it. Additionally, allowing VRAM->system behaves badly under heavy memory pressure because once we run out of TT, stuff starts to be moved back and forth between VRAM and system, and the TT contents are hardly renewed. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: fix connector table parsing for some cardsBen Skeggs
The connector table index in the DCB entry for each output type is an index into the connector table, and does *not* necessarily match up with what was previously called "index" in the connector table entries themselves. Not real sure what that index is exactly, renamed to "index2" as we still use it to prevent creating multiple TV connectors. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: add a memory barrier to pushbuf submissionMaarten Maathuis
- This is useful for vram pushbuffers that are write combined. - pre-nv50 has one too (in WRITE_PUT). Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: print a message very early during suspendMaarten Maathuis
- In case of suspend lockups it's nice to know it happened in nouveau. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay.Francisco Jerez
The calculated values were a little bit off (~16 clocks), the only effect it could have had is a slightly offset image with respect to the blob on analog outputs (bug 26790). Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMIBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: add option to allow override of dcb connector table typesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: Improve PGRAPH interrupt handling.Marcin Kościelnicki
This makes nouveau recognise and report more kinds of PGRAPH errors, as well as prevent GPU lockups resulting from some of them. Lots of guesswork was involved and some part of this is probably incorrect. Some potential-lockuop situations are handled by just resetting a whole PGRAPH subunit, which doesn't sound like a "proper" solution, but seems to work just fine... for now. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: Make ctxprog wait until interrupt handler is done.Marcin Kościelnicki
This will fix races between generated ctxprogs and interrupt handler. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nouveau: Fix fbcon corruption with font width not divisible by 8Marcin Kościelnicki
NV50 is nice and has a switch that autoaligns stuff for us. Pre-NV50, we need to align input bitmap width manually. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-03-10drm/nv50: Remove redundant/incorrect ctxvals initialisation.Marcin Kościelnicki
11c/004 offset corresponds to PGRAPH reg 0x400828, and is initialised earlier anyway by both our ctxprog generator and blob ctxvals. It's actually incorrect with the generator, since we use different layout on pre-NVA0. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: use ALIGN instead of open coding itMatt Turner
CC: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: report unknown connector state if lid closedBen Skeggs
This is in preference to disconnected. If there's no other outputs connected this will cause LVDS to be programmed even with the lid closed rather than having X fail to start because of no available outputs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: support version 0x20 displayport tablesBen Skeggs
Not entirely identical to 0x21, the per-encoder table header lacks the third init table pointer. However, our current parsing of the table should work just fine. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: Fix noaccel/nofbaccel option descriptions.Marcin Kościelnicki
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nv50: Implement ctxprog/state generation.Marcin Kościelnicki
This removes dependence on external firmware for NV50 generation cards. If the generated ctxprogs don't work for you for some reason, please report it. Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: use dcb connector types throughout the driverBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nv50: enable hpd on any connector we know the gpio line forBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: use dcb connector table for creating drm connectorsBen Skeggs
This makes this code common to both the nv04 and nv50 paths. For the moment, we keep the previous behaviour with HDMI/eDP connectors and report them as DVI-D/DP instead. This will be fixed once the rest of the code has been fixed to deal with those types. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: construct a connector table for cards that lack a real oneBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: check for known dcb connector typesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: parse dcb gpio/connector tables after encodersBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: reorganise bios header, add dcb connector type enumsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: merge nvbios and nouveau_bios_infoBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_tableBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_tableBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: allow retrieval of vbios image from debugfsBen Skeggs
It's very useful to be able to access this without additional tools for debugging purposes. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: fix missing spin_unlock in failure pathLuca Barbieri
Found by sparse. Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: fix i2ctable bounds checkingMarcin Slusarz
i2c_entries seems to be the number of i2c entries, so with index equal to this number, we could read invalid data from i2ctable. Fix it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: fix nouveau_i2c_find bounds checkingMarcin Slusarz
Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: fix pramdac_table range checkingMarcin Slusarz
get_tmds_index_reg reads some value from stack when mlv happens to be equal to size of pramdac_table array. Fix it. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: new gem pushbuf interface, bump to 0.0.16Ben Skeggs
This commit breaks the userspace interface, and requires a new libdrm for nouveau to operate again. The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for compatibility purposes are now gone, and replaced with the new ioctl which allows for multiple push buffers to be submitted (necessary for hw index buffers in the nv50 3d driver) and relocations to be applied on any buffer. A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed for userspace modesetting have also been removed. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-02-25drm/nv50: make pushbuf dma object cover entire vmBen Skeggs
This allows us to submit push buffers from any memtype to the hardware. We'll need this ability for VRAM index buffers at some point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: remove PUSHBUF_CAL macroBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nv50: switch to indirect push buffer controlsBen Skeggs
PFIFO on G80 and up has a new mode where the main ring buffer is simply a ring of pointers to indirect buffers containing the actual command/data packets. In order to be able to implement index buffers in the 3D driver we need to be able to submit data-only push buffers right after the cmd packet header, which is only possible using the new command submission method. This commit doesn't make it possible to implement index buffers yet, some userspace interface changes will be required, but it does allow for testing/debugging of the hardware-side support in the meantime. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25drm/nouveau: protect channel create/destroy and irq handler with a spinlockMaarten Maathuis
The nv50 pgraph handler (for example) could reenable pgraph fifo access and that would be bad when pgraph context is being unloaded (we need the guarantee a ctxprog isn't running). Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: fix vram ptes on IGPs to point at stolen system memoryBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: fix instmem binding on IGPs to point at stolen system memoryBen Skeggs
This also modifies the unused PRAMIN PT entries to be all zeroes, can't really recall why I used 9/0 initially, just that it didn't work for some reason. It was likely masking a bug elsewhere that's since been fixed. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: improve vram page table constructionBen Skeggs
This commit changes nouveau to construct PTEs which look very much like the ones the binary driver creates. I presume that filling multiple PTEs identically with length flags and the physical address of the start of a block of VRAM is a hint to the memory controller that it need not perform additional page table lookups for that range of addresses. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: more efficient clearing of gpu page table entriesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nv50: make nv50_mem_vm_{bind,unbind} operate only on vramBen Skeggs
GART is handled elsewhere, no reason to have the code for it here too. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-23drm/nouveau: Fix up pre-nv17 analog load detection.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-16drm/nouveau: Force TV encoder DPMS reinit after resume.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-16drm/nouveau: use mutex for vbios lockBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-11nouveau: fix state detection with switchable graphicsMatthew Garrett
Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-11drm/nouveau: move dereferences after null checksMarcin Slusarz
Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10drm/nv50: make the pgraph irq handler loop like the pre-nv50 versionMaarten Maathuis
Unset the bit that indicates that a ctxprog can continue at the end. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10drm/nv50: delete ramfc object after disabling fifo, not beforeMaarten Maathuis
ramfc is zero'ed upon destruction, so it's safer to do things in the right order. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-10drm/nv50: avoid unloading pgraph context when ctxprog is runningMaarten Maathuis
- We need to disable pgraph fifo access before checking the current channel, otherwise we could still hit a running ctxprog. - The writes to 0x400500 are already handled by pgraph->fifo_access and are therefore redundant, moreover pgraph fifo access should not be reenabled before current context is set as invalid. So remove them altogether. Signed-off-by: Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 17:55:17 +0000