aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid/hid-ids.h
AgeCommit message (Collapse)Author
2009-08-08HID: ignore Philips IEEE802.15.4 RF DongleHenning Glawe
This usb device claims to be of HID class, but is in fact a 802.15.4 lowpan transceiver, therefore the generic HID driver cannot operate this device. A separate driver for this device will be written for this using the new 802.15.4 stack. Signed-off-by: Henning Glawe <glaweh@debian.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08HID: ignore all recent SoundGraph iMON devicesJarod Wilson
After some inspection of the Windows iMON driver, several additional device IDs were added to the lirc_imon driver. At least a few of these have been seen in the wild, and require manual quirking to keep the usbhid driver from binding to them. Rather than list out every single device, ignore the entire device ID range, 0x0034 - 0x0046. Some of these may not advertise themselves as HID devices, but no harm done to such devices anyway. Does the right thing in brief testing w/my 0x0045 device. Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: driver for Twinhan USB 6253:0100 remote controlBruno Premont
Add explicit key mappings for TwinHan USB HID remote control. All dummy Ctrl, Alt, Meta, ... key press/release events generated by the remote are silenced by "unmapping" them. This makes Power and Volume keys single-key and strips the regular (even while idle) key release events for Ctrl, Alt, Meta, ... Signed-off-by: Bruno Premont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: add force feedback support for Logitech WingMan Formula Force GPJiri Kosina
Add force feedback support for Logitech WingMan Formula Force GP (0x046d/0xc293). Reported-by: wylda@volny.cz Tested-by: wylda@volny.cz Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-15HID: force feedback support for SmartJoy PLUS PS2/USB adapterJussi Kivilinna
This driver adds force feedback support for SmartJoy PLUS PS2/USB adapter. I made this driver one device spesific instead of making generic 'wisegroup-ff' because I have another Wisegroup PS2/USB adapter that doesn't work same way as SmartJoy PLUS. If another device that is compatible pops up, this driver could be then renamed to something more generic. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-13HID: Wacom Graphire Bluetooth driverBastien Nocera
Based on the work by Andrew Zabolotny, an HID driver for the Bluetooth Wacom tablet. This is required as it uses a slightly different protocols from what's currently support by the drivers/input/wacom* driver, and those only support USB. A user-space patch is required to activate mode 2 of the Wacom tablet, as hidp does not support hid_output_raw_report. Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-11HID: add NOGET quirk for devices from CH ProductsAlan Stern
This patch (as1240) adds the NOGET quirk for three devices from CH Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim yoke. Without these quirks, the devices haven't worked for many kernel releases. Sometimes replugging them after boot-up would get them to work and sometimes they wouldn't work at all. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sean Hildebrand <silverwraithii@gmail.com> Reported-by: Sid Boyce <sboyce@blueyonder.co.uk> Tested-by: Sean Hildebrand <silverwraithii@gmail.com> Tested-by: Sid Boyce <sboyce@blueyonder.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-04-17HID: Add support for the G25 force feedback wheel in native modeChristophe Borivant
Add Product Id 0xc299 for the Logitech G25 force feedback wheel The Logitech G25 force feedback wheel, is first recognize by the kernel with the product id "0xc294". In this mode, we can't use all the axes and buttons of the wheel. Using a userland utility, it is possible to make the wheel switch to native mode -- http://svn.vdrift.net/viewvc.cgi/trunk/tools/G25manage/?root=VDrift In native mode, the wheel change its id number to "0xc299". The packet that needs to be sent to the wheel to swtich to native mode and change its PID is { 0xf8, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00 } Signed-off-by: Christophe Borivant <christophe.borivant@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30HID: add support for Kye/Genius Ergo 525VJiri Kosina
This device sends several buttons in a separate field, which is wrongly described in the report descriptor. Fix it in the following way: - change led usage page to button - report size 8 count 1 becomes report size 1 count 8 - the button usage range changed to 4-7 (the mouse has three buttons in a different field already). Reported-by: Tomas Hanak <tomas.hanak@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30HID: Support Apple mini aluminum keyboardRyan Finnie
New USB device ids and quirks for the "mini" Apple USB aluminum keyboards released Tuesday, model A1242. Note that while I own the ANSI (0x021d) version and cannot verify that the ISO (0x021e) and JIS (0x021f) versions exist, previous releases have followed the triple id convention for awhile now, and the device ids fit perfectly between USB_DEVICE_ID_APPLE_GEYSER4_* and USB_DEVICE_ID_APPLE_ALU_*. Signed-off-by: Ryan Finnie <ryan@finnie.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30HID: support for Kensington slimblade deviceJiri Kosina
0x47d/0x2041 device sends two extra buttons in 0xff00 usage page and therefore requires special handling. Reported-by: Jason Noble <nobleja@polezero.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30HID: DragonRise game controller force feedback driverRichard Walmsley
Adds force feedback support for USB DragonRise Inc. game controllers. These devices are mass produced in China and distributed under several vendors. Signed-off-by: Richard Walmsley <richwalm@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-02-17HID: blacklist Powercom USB UPSMichael Tokarev
For quite some time users with various UPSes from Powercom were forced to play magic with bind/unbind in /sys in order to be able to see the UPSes. The beasts does not work as HID devices, even if claims to do so. cypress_m8 driver works with the devices instead, creating a normal serial port with which normal UPS controlling software works. The manufacturer confirmed the upcoming models with proper HID support will have different device IDs. In any way, it's wrong to have two completely different modules for one device in kernel. Blacklist the device in HID (add it to hid_ignore_list) to stop this mess, finally. Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-29HID: add antec-branded soundgraph imon devices to blacklistJarod Wilson
hid_ignore_list additions for the Antec-branded SoundGraph iMon VFD and LCD devices (0x15c2:0x0044 and 0x0045). These devices are driven by lirc. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04Merge branch 'upstream-fixes' into for-nextJiri Kosina
Conflicts: drivers/hid/hid-ids.h
2009-01-04HID: add proper support for pensketch 12x9 tabletMatt Helsley
The Genius PenSketch 12x9 tablet has a puck (labeled a "Tablet Mouse") in addition to a pen. Without registering a quirk the tablet appears to be a single input device that reports the wrong axis information in /proc/bus/input/devices, and sends incorrect events (e.g. ABS_Z instead of ABS_Y). This information confuses the X evdev driver and makes the device impossible to use. The quirk fixes events and splits the device into multiple input event devices so that at least the puck is useful. Signed-off-by: Matt Helsley <matt.helsley@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: don't allow DealExtreme usb-radio be handled by usb hid driverAlexey Klimov
This device is already handled by radio-si470x driver, and we therefore want usbhid to ignore it. Patch places usb ids of that device in ignore section of hid-core.c Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: driver for TopSeed Cyberlink quirky remoteLev Babiev
I recently picked up a Cyberlink branded remote control produced by TopSeed Tech Corp. Alas, it appears that this device is using non-standard mappings for some of it's keys (Usage page 0xffbc). Signed-off-by: Lev Babiev <harley@hosers.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add n-trig digitizer supportRafi Rubin
Added quirks for the N-Trig digitizer. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: automatically call usbhid_set_leds in usbhid driverAlan Stern
This patch (as1146c) makes usbhid automatically call usbhid_set_leds() for any device that supports the keyboard boot protocol. In theory this should be perfectly safe. BIOSes send the LED output report as part of their normal device initialization, so any keyboard device supporting the boot protocol has to be able to handle it. As a side effect, the hid-dell and hid-bright drivers are no longer needed, and the Logitech keyboard driver can be removed from hid-lg. CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-20HID: add USB ID for another dual gameron adapterJiri Kosina
0x0810/0x0002 needs the very same handling as 0x0001. Reported-by: Steve Conklin <sconklin@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: support for new unibody macbooksHenrik Rydberg
The unibody MacBook 5 and MacBook Pro 5 come with a new version of the bcm5974 trackpad. This patch adds the USB device ids and all the appropriate quirks, including hid_blacklist. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-11V4L/DVB (9337a): HID: Don't allow KWorld radio fm700 be handled by usb hid ↵Alexey Klimov
drivers This device is already handled by radio-si470x driver, and we therefore want usbhid to ignore it. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-30HID: add quirk entry for no-name keyboard (0x13ba/0x0017)Alan Stern
This patch (as1157) adds a no-name PS/2-to-USB keyboard+mouse adapter to the hid-dell driver. (The device shows up with a Product string saying "Generic USB K/B", nothing more.) This will force an initial "Set-LEDs" report to be sent to the device, without which it won't send any keystroke information. Several bug reports mentioning this device have been filed in various forums; the patch should resolve them. This is just a temporary stop-gap for 2.6.28. A later patch for 2.6.29 will introduce a more generic mechanism for "Set-LEDs", making this change (and the entire hid-dell driver) unnecessary. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-23HID: Add support for Sony Vaio VGX-TP1EJiri Kosina
The Sony Vaio VGX-TP1E multimedia PC has a wireless keyboard with a touchpad. The mouse pointer is wrongly declared as constant non-data variable, which make HID code to completely ignore all the "Pointer" usages. Fix the report descriptor before it enters the parser to contain touchpad pointer description that is correctly parsable (declaring data rather than constant). Reported-by: Stefan Hundhammer <sh@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-20HID: quirk for OLED devices present in ASUS G50/G70/G71Jiri Kosina
The new revision of OLED device (0x0b05/0x175b) found in ASUS G50/G70/G71 should be ignored the same way we currently do for 0x1726, so that asus_oled driver can make use of the device. Reported-by: Costin Grigoras <costin.grigoras@cern.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-17HID: add support for another Gyration remote controlJiri Kosina
There is a slightly different Gyration remote control, which requires the quirks we already have in place for the 0x0002 PID, plus KEY_MEDIA mapping is different. Reported-by: Marc Randolph <mrand@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-17Revert "HID: Invert HWHEEL mappings for some Logitech mice"Dan Nicholson
This reverts commit 740f370dc61dc478d891d7d47660bb3ae39ddb4f. It turned out to be correct in the first place: a positive value should be sent when the wheel is moved to the right, and a negative value when moved to the left. This is the behavior expected by the Xorg evdev driver. I must have had a remapping somewhere else in my system when originally testing this. Testing on another system shows that the unpatched kernel is correct. Here is a bug report from Mandriva that brought the problem to my attention: https://qa.mandriva.com/show_bug.cgi?id=44309#c19 Signed-off-by: Dan Nicholson <dbn.lists@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-16HID: blacklist additional SoundGraph iMon LCD modelsJarod Wilson
hid_ignore_list additions for more SoundGraph iMon LCD devices Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: add support for Bright ABNT2 brazilian deviceMauro Carvalho Chehab
This keyboard needs to reset the LEDS during probe. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: Don't let Avermedia Radio FM800 be handled by usb hid driversMauro Carvalho Chehab
Based on an original patch from Alexey Klimov <klimov.linux@gmail.com>, against kernel version 2.6.27. This device is already handled by radio-mr800 driver, and we therefore want usbhid not to touch it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: fix numlock led on Dell device 0x413c/0x2105Mauro Carvalho Chehab
This keyboard needs to re-sync numlock after probing. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: add appletv IR receiver quirkPeter Korsgaard
Similar to the existing IRCONTROL4 handling Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move zeroplus FF processingJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move thrustmaster FF processingJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move pantherlord FF processingJiri Slaby
Move the force feedback processing into a separate module. [jkosina@suse.cz: fix Kconfig texts a little bit] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: ignore iBuddy devicesRemi Cattiau
iBuddy devices claim to be HID devices, but they are not. Add them to the blacklist. Signed-off-by: Remi Cattiau <remi@cattiau.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: add support for Super Dual Box Pro USB PS2/PS2 adapterJiri Kosina
This seems to be the very same device, as already supported Smartjoy dual Plus, but with slightly different vendor ID. Let's support this one too. Reported-by: David Ashley <dashxdr@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move logitech FF processingJiri Slaby
Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move gyration quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move belkin quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move chicony quirksJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move microsoft quirksJiri Slaby
Move them from the core code to a separate driver. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move ignore quirksJiri Slaby
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output warning when ENODEV is error code in usbhid and try ordinal input in hidp when that error is returned. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14HID: move ids into separate fileJiri Slaby
Move ids from hid-quirks.c into separate file, since it will be needed in more than one place. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>