aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid/hid-input.c
AgeCommit message (Collapse)Author
2007-07-09Merge branches 'debug-module-param' and 'upstream' into for-linusJiri Kosina
2007-07-09HID: handle cases of volume knobs generating relative valuesJiri Kosina
There are some devices (for example Dell Multimedia Keyboard SK-8135) that have a volume control knob which generates relative events instead of absolute. hid-input maps them to ABS_VOLUME. HUT pages don't restrict volume to absolute values. Adding REL_VOLUME doesn't seem feasible, nothing knows how to handle it. This patch translates relative ABS_VOLUME events into appropriate number of series of VOLUME_UP or VOLUME_DOWN events respectively, so that userspace sees the correct values in the end. kernel.org bugzilla 5233 Reported-by: Jochen Eisinger <jochen@penguin-breeder.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for logitech cordless desktop LX500 special mappingRyo Dairiki
This keyboard has wireless mouse which has left, middle, right buttons and 2-dimensional scrolling wheel. Unfornetuly, this wheel reports side scrolling events and 11 or 12 button events at the same time. I've wrote a patch to fix this mapping. I'm not sure if this mapping is proper for buttons, because , for example, there is no entry for "burn cd" in input.h. The patch also supress 11 and 12 button events from mouse when you scroll the wheel left and right. With this patch, only side scrolling events are reported. (This mouse has only 4 buttons and 2D wheel. There is no such buttons like 11 and 12.) Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: support for Petalynx Maxter remote controlJiri Kosina
Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from consumer page (reserved in HUT 1.12) for back and more keys. It also emits a few usages from LOGIVENDOR page, which need adding. Also, this device has broken report descriptor - the reported maximum is too low - it doesn't contain the range for 'back' and 'more' keys, so we need to bump it up before the report descriptor is being parsed. Besides all this, it also requires NOGET quirk. This patch does so. [1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=en Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: fix mismatch between hid-input HUT find/search mapping and the HUTHans de Goede
When comparing usb vs ps2 / testing the keycodes generated for the easy access keys on my trust (microsoft compatible) keyboard. I noticed the search key generated the keycode for find when connected through USB. This lead me to check the consumer page mappings in hid-input.c . And it turns out the the mapping for ID 0x221 deviates from the HUT standard document: http://www.usb.org/developers/devclass_docs/Hut1_12.pdf Currently it is incorrectly mapped to find, whereas it should be mapped to search. I also added missing bindings for ID 0x21f, the real find and for 0x222, goto. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: force hid-input for Microsoft SideWinder GameVoice deviceJiri Kosina
Microsoft SideWinder GameVoice driver is a trivial device with a few buttons (0x09 HID usage) and an audio connector, which just forwards the audio input into oridinary sound card present in the computer. Despite this fact, the only interface of this device reports itself as a Telephony/Headset type of HID device. This is apparently incorrect - the device itself doesn't provide any audio/telephony functionality. This is achieved in userland application which only needs to receive the button events from the HID driver. This patch establishes a new quirk which forces hid-input to claim a device it will otherwise leave untouched. Reported-by: Tomas Carnecky <tom@dbservice.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: input mapping for Chicony KU-0418 tactical padJiri Kosina
Chicony KU-0418 (aka Saitek PZ08AU gaming keyboard) has a separate "tactical pad" with 11 non-functional buttons - they generate usage codes from 0xff00 (MSVENDOR) usage page. Special case handling for this keyboard added, so no later clash with MSVENDOR mappings is going to occur. Pointed out in bugzilla #7352 Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-07-09HID: make debugging output runtime-configurableJiri Kosina
There have been many reports recently about broken HID devices, the diagnosis of which required users to recompile their kernels in order to be able to provide debugging output needed for coding a quirk for a particular device. This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it possible to control debugging output produced by HID code by supplying 'debug=1' module parameter. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09HID: add hooks for getkeycode() and setkeycode() methodsMarvin Raaijmakers
Provide hooks for getkeycode() and setkeycode() methods to input_dev. Signed-off-by: Marvin Raaijmakers <marvin.raaijmakers@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09HID: switch to using input_dev->dev.parentDmitry Torokhov
In preparation for struct class_device -> struct device input core conversion switch to using input_dev->dev.parent when specifying device position in sysfs tree. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-09HID: add input mappings for non-working keys on Logitech S510 remoteCharles Pillar
HID-input mapping for non-working S510 remote control buttons. Signed-off-by: Charles Pillar <pillarama@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-04-11USB HID: Logitech MX3000 keyboard needs report descriptor quirkJiri Kosina
Logitech MX3000 contains report descriptor which doesn't cover usages above 0x28c, but emits such usages. Report descriptor needs fixing in the very same way as with receivers shipped with S510 keyboards. This patch also adds a few mappings for multimedia keys that S510 didn't emit. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-04-11HID: enable dead keys on a belkin wireless keyboardChris Clayton
Belkin Wireless keyboard, model number F8E849KYBD, USB ID 1020:0006, FCCID: K7SF8E849KYBD emits usages 0x03a-0x03c from Consumer usage page. As of HUT v1.12, these are marked as reserved. If any conflict arises later, the mapping could be made conditional on VID/PID. Signed-off-by: Chris Clayton <chris2553@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-03-01HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle buttonJiri Kosina
Dongle shipped with Logitech DiNovo Edge (0x046d/0xc714) behaves in a weird non-standard way - it contains multiple reports with the same usage, which results in remapping of GenericDesktop.X and GenericDesktop.Y usages to GenericDesktop.Z and GenericDesktop.RX respectively, thus rendering the touchwheel unusable. The commit 35068976916fdef82d6e69ef1f8c9a1c47732759 solved this in a way that it didn't remap certain usages. This however breaks (at least) middle button of Logic3 / SpectraVideo (0x1267/0x0210), which in contrary requires the remapping. To make both of the harware work, allow remapping of these usages again, and introduce a quirk for Logitech DiNovo Edge "touchwheel" instead - we disable remapping for key, abs and rel events only for this hardware. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-03-01HID: fix broken Logitech S510 keyboard report descriptor; make extra keys workJiri Kosina
This patch makes extra keys (F1-F12 in special mode, zooming, rotate, shuffle) on Logitech S510 keyboard work. Logitech S510 keyboard sends in report no. 3 keys which are far above the logical maximum described in descriptor for given report. This patch introduces a HID quirk for this wireless USB receiver/keyboard in order to fix the report descriptor before it's being parsed - the logical maximum and the number of usages is bumped up to 0x104d). The values are in the "Reserved" area of consumer HUT, so HID_MAX_USAGE had to be changed too. In addition to proper extracting of the values from report descriptor, proper HID-input mapping is introduced for them. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUGJiri Kosina
CONFIG_INPUT_DEBUG is non-existent option, so remove anything depending on it. Also, as we have new CONFIG_HID_DEBUG, this should be used on places where ifdef DEBUG was used before. Suggested by Adrian Bunk. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05HID: API - fix leftovers of hidinput API in USB HIDJiri Kosina
hidinput_{open,close}() functions do not belong to usbhid, but to the generic HID layer. Move them, and fix hooks in struct hid_device, so that now the callbacks are done to transport-specific _open() functions, but not input_open() functions. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05HID: hid debug from hid-debug.h to hid layerJiri Kosina
hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-02-05hid: quirk for multi-input devices with unneeded output reportsAnssi Hannula
Add new quirk HID_QUIRK_SKIP_OUTPUT_REPORTS to skip output reports when enumerating reports on a hid-input device. Add this quirk and HID_QUIRK_MULTI_INPUT to 0810:0001. PantherLord Twin USB Joystick, 0810:0001 has separate input reports for 2 distinct game controllers in the same interface, so it needs HID_QUIRK_MULTI_INPUT. However, the device also contains one output report per controller which is used to control the force feedback function, and we do not want those to appear as separate input devices as well. The simplest approach seems to be to add a quirk to skip output reports on 0810:0001, and allow the force feedback driver to handle those. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-30HID: fix pb_fnmode and move it to generic HIDJiri Kosina
The apple powerbook people are used to switch the pb_fnmode setting at runtime through writing to sysfs, altering the module parameter value. This was broken for them in 2.6.20-rc1 when generic HID layer was introduced, as the pb_fnmode flag was made per-hiddevice, instead of global variable. This patch moves the pb_fnmode module parameter from usbhid module to hid module, but apart from that retains backward compatibility with respect to changing the mode through sysfs. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25HID: fix hid-input mapping for Firefly Mini Remote ControlSimon Bennett
Patch adds entries to the HID consumer page for the Firefly Mini IR remote control Signed-off-by: Simon Bennett <simon@levanta.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: hid/hid-input.c doesn't need to include linux/usb/input.hJiri Kosina
There is no reason for generic hid-input.c to include usb-specific input.h. As a sideeffect, this also fixes warning of redefinition of dbg() macro, when hid-input.c is compiled with DEBUG (as there is a clash between dbg() from hid.h and usb/input.h). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-21HID: proper LED-mapping for SpaceNavigatorSimon Budig
This change introduces a mapping for LED indicators between the HID specification and the Linux input subsystem. The previous code properly mapped the LEDs relevant for Keyboards, but garbeled the remaining ones. With this change all LED enums from the input system get mapped to more or less equivalent LED numbers from the HID specification. This patch also ensures that the unused bits in a HID report to the device are zeroed out. This makes the 3Dconnexion SpaceNavigator fully usable with the linux input system. Signed-off-by: Simon Budig <simon@budig.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-08HID: fix mappings for DiNovo Edge Keyboard - Logitech USB BT receiverAdrian Drzewiecki
This patch fixes mappings for the Logitech USB BT receiver that ships along with Logitech's DiNovo Edge keyboard. Without these changes, the "touchwheel" does not work as intended (a mouse) Signed-off-by: Adrian Drzewiecki <adriand@drze.net> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2006-12-14input/hid: Supporting more keys from the HUT Consumer PageFlorian Festi
On USB keyboards lots of hot/internet keys are not working. This patch adds support for a number of keys from the USB HID Usage Table (http://www.usb.org/developers/devclass_docs/Hut1_12.pdf). It also adds several new key codes. Most of them are used on real world keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE, NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes". I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a remote control in parallel and it makes sense to have them behave differently. Signed-off-by: Florian Festi <ffesti@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2006-12-08[PATCH] Generic HID layer - pb_fnmodeJiri Kosina
pb_fnmode parameter has to be passed to usbhid, both for compatibility reasons and also because it logically belongs there. Also removes empty hid-input.c file in drivers/usb/input. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-08[PATCH] Generic HID layer - USB APIJiri Kosina
- 'dev' in struct hid_device changed from struct usb_device to struct device and fixed all the users - renamed functions which are part of USB HID API from 'hid_*' to 'usbhid_*' - force feedback initialization moved from common part into USB-specific driver - added usbhid.h header for USB HID API users - removed USB-specific fields from struct hid_device and moved them to new usbhid_device, which is pointed to by hid_device->driver_data - fixed all USB users to use this new structure Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-08[PATCH] Generic HID layer - APIJiri Kosina
- fixed generic API (added neccessary EXPORT_SYMBOL, fixed hid.h to provide correct prototypes) - extended hid_device with open/close/event function pointers to driver-specific functions - added driver specific driver_data to hid_device Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-08[PATCH] Generic HID layer - code splitJiri Kosina
The "big main" split of USB HID code into generic HID code and USB-transport specific HID handling. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>