aboutsummaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)Author
2009-01-07HID: fix hid->hiddev initialization in hiddev_connect()Jiri Kosina
Commit 079034073fa ("HID: hiddev cleanup -- handle all error conditions properly") by mistake removed proper initialization of hid->hiddev pointer in hiddev_connect() in case usb_register_dev() succeeds for the hiddev node. Put it properly back in place. Reported-and-tested-by: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07USB: change interface to usb_lock_device_for_reset()Alan Stern
This patch (as1161) changes the interface to usb_lock_device_for_reset(). The existing interface is apparently not very clear, judging from the fact that several of its callers don't use it correctly. The new interface always returns 0 for success and it always requires the caller to unlock the device afterward. The new routine will not return immediately if it is called while the driver's probe method is running. Instead it will wait until the probe is over and the device has been unlocked. This shouldn't cause any problems; I don't know of any cases where drivers call usb_lock_device_for_reset() during probe. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-04Merge branch 'upstream-fixes' into for-nextJiri Kosina
Conflicts: drivers/hid/hid-ids.h
2009-01-04HID: fix error condition propagation in hid-sony driverJiri Kosina
sony_set_operational() only propagates return value from usb_control_msg(), which returns negative on error and number of transferred bytes otherwise. Reported-by: Marcin Tolysz <tolysz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: fix reference count leak hidrawOliver Neukum
The hidraw subsystem has a bug that prevents the close syscall from ever reaching the low level driver, leading to a resource leak. Fix by replacing postdecrement with predecrement. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add proper support for pensketch 12x9 tabletMatt Helsley
The Genius PenSketch 12x9 tablet has a puck (labeled a "Tablet Mouse") in addition to a pen. Without registering a quirk the tablet appears to be a single input device that reports the wrong axis information in /proc/bus/input/devices, and sends incorrect events (e.g. ABS_Z instead of ABS_Y). This information confuses the X evdev driver and makes the device impossible to use. The quirk fixes events and splits the device into multiple input event devices so that at least the puck is useful. Signed-off-by: Matt Helsley <matt.helsley@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: don't allow DealExtreme usb-radio be handled by usb hid driverAlexey Klimov
This device is already handled by radio-si470x driver, and we therefore want usbhid to ignore it. Patch places usb ids of that device in ignore section of hid-core.c Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: fix default Kconfig setting for TopSpeed driverJiri Kosina
Make default setting for TopSpeed driver compliant with the defaults of the other specialized HID drivers. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: driver for TopSeed Cyberlink quirky remoteLev Babiev
I recently picked up a Cyberlink branded remote control produced by TopSeed Tech Corp. Alas, it appears that this device is using non-standard mappings for some of it's keys (Usage page 0xffbc). Signed-off-by: Lev Babiev <harley@hosers.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: make boot protocol drivers depend on EMBEDDEDParag Warudkar
The usbmouse and usbkbd modules are not supposed to be used with regular USB mice and keyboards. Make them depend on EMBEDDED to prevent them from being built and loaded on non-EMBEDDED configs. Signed-off-by: Parag Warudkar <parag.lkml@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: hiddev cleanup -- handle all error conditions properlyOliver Neukum
This is a cleanup of hiddev and fixes the following issues: - thread safety by locking in read & ioctl, introducing a per device mutex - race between ioctl and disconnect, introducing a flag and locking in form of a per low level device mutex - race between open and other methods, making sure only successfully opened devices are put on the list, changing order of events - range checking both upper and lower limits of the minor range - make sure further calls to open fail for unplugged devices even if the device still has opened files - error checking for low level open - possible loss of wakeup events, using standard waiting macros - race in initialisation by moving registration after full initialisation Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: force feedback driver for GreenAsia 0x12 PIDLukasz Lubojanski
I have implemented Force Feedback driver for another "GreeAsia" based device (0e8f:0012 "GreenAsia Inc. USB Joystick"). The functionality was tested with MANTA Warior MM816 and SpeedLink Strike2 SL-6635 and fftest software - everything seems to work right. Signed-off-by: Lukasz Lubojanski <lukasz@lubojanski.info> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: switch specialized drivers from "default y" to !EMBEDDEDDavid Brownell
Fix the obnoxious "default y" for all the "special" HID code, which forces folk with EMBEDDED defined to manually override that inappropriate default for almost 20 choices. The general policy is against "default y"; it should apply here too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: set proper dev.parent in hidrawJiri Kosina
We need to properly set parent of the hidraw device (which is the corresponding physical device itself) in order to hidraw devices not end up under virtual device tree. Reported-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add dynids facilityJiri Slaby
Allow adding new devices to the hid drivers on the fly without a need of kernel recompilation. Now, one can test a driver e.g. by: echo 0003:045E:00F0.0003 > ../generic-usb/unbind echo 0003 045E 00F0 > new_id from some driver subdir. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: use GFP_KERNEL in hid_alloc_buffersJiri Slaby
We might sleep, so no problem to use GFP_KERNEL. While at it bring the function to coding style. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: usbhid, use usb_endpoint_xfer_intJiri Slaby
Use usb_endpoint_xfer_int() instead of direct use of constants. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: move usbhid flags to usbhid.hJiri Slaby
Move usbhid specific flags from global hid.h into local usbhid.h. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add n-trig digitizer supportRafi Rubin
Added quirks for the N-Trig digitizer. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add phys and name ioctls to hidrawJiri Kosina
The hiddev interface provides ioctl() calls which can be used to obtain phys and raw name of the underlying device. Add the corresponding support also into hidraw. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. CC: Jiri Kosina <jkosina@suse.cz> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: automatically call usbhid_set_leds in usbhid driverAlan Stern
This patch (as1146c) makes usbhid automatically call usbhid_set_leds() for any device that supports the keyboard boot protocol. In theory this should be perfectly safe. BIOSes send the LED output report as part of their normal device initialization, so any keyboard device supporting the boot protocol has to be able to handle it. As a side effect, the hid-dell and hid-bright drivers are no longer needed, and the Logitech keyboard driver can be removed from hid-lg. CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: non-input reports can also be numberedJiri Kosina
When computing the maximal buffer size needed, we must take into account that not only input reports can be numbered. Pointed out in bugzilla #10467 Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: ignore mouse interface for unibody macbooksJiri Kosina
The mouse interface on unibody macbooks is going to be handled by bcm59743 driver in 2.6.29. Reported-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-28HID: Apple ALU wireless keyboards are bluetooth devicesJan Scholz
While parsing 'hid_blacklist' in the apple alu wireless keyboard is not found. This happens because in the blacklist it is declared with HID_USB_DEVICE although the keyboards are really bluetooth devices. The same holds for 'apple_devices' list. This patch fixes it by changing HID_USB_DEVICE to HID_BLUETOOTH_DEVICE in those two lists. Signed-off-by: Jan Scholz <Scholz@fias.uni-frankfurt.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-23HID: remove setup mutex, fix possible deadlockJiri Slaby
It causes recursive locking warning and is unneeded after introduction of STARTED flag. * Resume vs. stop is effectively solved by DISCONNECT flag. * No problem in suspend vs. start -- urb is submitted even after open which is possible after connect which is called after start. * Resume vs. start solved by STARTED flag. * Suspend vs. stop -- no problem in killing urb and timer twice. Reported-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-20HID: add USB ID for another dual gameron adapterJiri Kosina
0x0810/0x0002 needs the very same handling as 0x0001. Reported-by: Steve Conklin <sconklin@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-20HID: unignore mouse on unibody macbooksJiri Kosina
In commit a96d6ef34, the mouse interfaces on the unibody macbooks were put into hid mouse ignore list. This was a little bit too premature though, as the corresponding bcm5974 changes are scheduled for 2.6.29. Remove these devices from the ignore list for now, in order to provide at least basic functionality with the HID driver. Will be reintroduced in 2.6.29 Reported-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-17HID: fix blacklist entries for greenasia/pantherlordJiri Kosina
Fix misplaced quirk entries for devices driven by hid-pl driver. The devices shouls be only blacklisted by generic HID driver, not completely ignored. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-14HID: don't grab devices with no inputJiri Slaby
Some devices have no input interrupt endpoint. These won't be handled by usbhid, but currently they are not refused and reside on hid bus. Perform this checking earlier so that we refuse to control such a device early enough (and not pass it to the hid bus at all). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: fix radio-mr800 hidquirksAlexey Klimov
This patch fixes radio-mr800 hidqurks. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: fix kworld fm700 radio hidquirksAlexey Klimov
This patch fixes kworld fm700 usb-radio hidqurks that handled by radio-si470x. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c The bug went in through the V4L/DVB tree by commit 6a13378a without HID maintainer being involved at all. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: fix start/stop cycle in usbhid driverJiri Slaby
`stop' left out usbhid->urb* pointers and so the next `start' thought it needs to allocate nothing and used the memory pointers previously pointed to. This led to memory corruption and device malfunction. Also don't forget to clear disconnect flag on start which was left set by the previous `stop'. This fixes echo DEVICE > /sys/bus/hid/drivers/DRIVER/unbind echo DEVICE > /sys/bus/hid/drivers/DRIVER/bind failures. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: use single threaded work queue for hid_compatAndi Kleen
Use single threaded work queue for hid_compat I doubt HID really needs to scale over multiple CPUs. So only use a single threaded workqueue for HID_COMPAT. This avoids some excessive thread use on systems with a larger number of CPUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: map macbook keys for "Expose" and "Dashboard"Henrik Rydberg
On macbooks there are specific keys for the user-space functions Expose and Dashboard, which currently has no counterpart in input.h. This patch adds KEY_SCALE and KEY_DASHBOARD, and maps the keyboard accordingly. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: support for new unibody macbooksHenrik Rydberg
The unibody MacBook 5 and MacBook Pro 5 come with a new version of the bcm5974 trackpad. This patch adds the USB device ids and all the appropriate quirks, including hid_blacklist. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13HID: fix locking in hidraw_open()Oliver Neukum
As open needs to sleep hidraw was wrong to call it with a spinlock held. Furthermore, open can of course fail which needs to be handled. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-11V4L/DVB (9337a): HID: Don't allow KWorld radio fm700 be handled by usb hid ↵Alexey Klimov
drivers This device is already handled by radio-si470x driver, and we therefore want usbhid to ignore it. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-01saner FASYNC handling on file closeAl Viro
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30HID: add quirk entry for no-name keyboard (0x13ba/0x0017)Alan Stern
This patch (as1157) adds a no-name PS/2-to-USB keyboard+mouse adapter to the hid-dell driver. (The device shows up with a Product string saying "Generic USB K/B", nothing more.) This will force an initial "Set-LEDs" report to be sent to the device, without which it won't send any keystroke information. Several bug reports mentioning this device have been filed in various forums; the patch should resolve them. This is just a temporary stop-gap for 2.6.28. A later patch for 2.6.29 will introduce a more generic mechanism for "Set-LEDs", making this change (and the entire hid-dell driver) unnecessary. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-27HID: sync on deleted io_retry timer in usbhid driverJiri Slaby
When suspending, make sure that the timer is not running any more. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-27HID: fix oops during suspend of unbound HID devicesJiri Slaby
Usbhid structure is allocated on start invoked only from probe of some driver. When there is no driver, the structure is null and causes null-dereference oopses. Fix it by allocating the structure on probe and disconnect of the device itself. Also make sure we won't race between start and resume or stop and suspend respectively. References: http://bugzilla.kernel.org/show_bug.cgi?id=11827 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Andreas Schwab <schwab@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add support for Sony Vaio VGX-TP1E HID: fix lock imbalance in hiddev HID: fix lock imbalance in hidraw HID: fix hidbus/appletouch device binding regression HID: add hid_type to general hid struct HID: quirk for OLED devices present in ASUS G50/G70/G71 HID: Remove "default m" for Thrustmaster and Zeroplus HID: fix hidraw_exit section mismatch HID: add support for another Gyration remote control Revert "HID: Invert HWHEEL mappings for some Logitech mice"
2008-10-23HID: Add support for Sony Vaio VGX-TP1EJiri Kosina
The Sony Vaio VGX-TP1E multimedia PC has a wireless keyboard with a touchpad. The mouse pointer is wrongly declared as constant non-data variable, which make HID code to completely ignore all the "Pointer" usages. Fix the report descriptor before it enters the parser to contain touchpad pointer description that is correctly parsable (declaring data rather than constant). Reported-by: Stefan Hundhammer <sh@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-23HID: fix lock imbalance in hiddevJiri Slaby
Don't forget to unlock_kernel() in hiddev_ioctl_usage(). Added in 7961df16819085b8a357720d89d0239036e6af2a (HID: Switch hiddev to unlocked_ioctl). Corresponing sparse warning: drivers/hid/usbhid/hiddev.c:515:10: warning: context imbalance in 'hiddev_ioctl_usage': wrong count at exit drivers/hid/usbhid/hiddev.c:515:10: context 'kernel_lock': wanted 0, got 1 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-23HID: fix lock imbalance in hidrawJiri Slaby
Add omitted unlock_kernel() to hidraw_ioctl(). Added in 979c407e3b89b606e810fa494ef316896eadbfad (HID: Push down BKL into ioctl handler in hidraw). Corresponing sparse warning: drivers/hid/hidraw.c:267:9: warning: context imbalance in 'hidraw_ioctl': wrong count at exit drivers/hid/hidraw.c:267:9: context 'kernel_lock': wanted 0, got 1 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-22HID: fix hidbus/appletouch device binding regressionJiri Slaby
The appletouch mouse devices are grabbed by the hid bus and not released even if apple driver says ENODEV (as expected) -- these are composite USB devices, for which we only ignore the mouse interface. This is currently not handled by hidbus code properly. Move the ignoring one level upper to forbid the hid layer to grab the device. Reported-by: Justin Mattock <justinmattock@gmail.com> Reported-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-22HID: add hid_type to general hid structJiri Slaby
Add type to the hid structure to distinguish to which device type (now only mouse) we are talking to. Needed for per device type ignore list support. Note: this patch leaves the type as unknown for bluetooth devices, there is not support for this in the hidp code. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-20HID: quirk for OLED devices present in ASUS G50/G70/G71Jiri Kosina
The new revision of OLED device (0x0b05/0x175b) found in ASUS G50/G70/G71 should be ignored the same way we currently do for 0x1726, so that asus_oled driver can make use of the device. Reported-by: Costin Grigoras <costin.grigoras@cern.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-19HID: Remove "default m" for Thrustmaster and ZeroplusAndi Kleen
No reason at all to make these obscure drivers default m Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>