aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/busses/Kconfig
AgeCommit message (Collapse)Author
2010-03-07Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c: Add support for Xilinx XPS IIC Bus Interface i2c: omap: Add support for 16-bit registers i2c-pnx: fix setting start/stop condition powerpc: doc/dts-bindings: update doc of FSL I2C bindings i2c-mpc: add support for the MPC512x processors from Freescale i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: use __devinit[data] for initialization functions and data i2c/imx: don't add probe function to the driver struct i2c: Add support for Ux500/Nomadik I2C controller
2010-03-07Merge branch 'next-i2c-xilinx' into next-i2cBen Dooks
2010-03-07i2c: Add support for Xilinx XPS IIC Bus InterfaceRichard Röjfors
This patch adds support for the Xilinx XPS IIC Bus Interface. The driver uses the dynamic mode, supporting to put several I2C messages in the FIFO to reduce the number of interrupts. It has the same feature as ocores, it can be passed a list of devices that will be added when the bus is probed. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07i2c-mpc: add support for the MPC512x processors from FreescaleWolfgang Grandegger
As I2C interrupts must be enabled for the MPC512x by the setup function as well, "fsl,preserve-clocking" is handled in a slighly different way. Also, the old settings are now reported calling dev_dbg(). For the MPC512x the clock setup function of the MPC52xx can be re-used. Furthermore, the Kconfig help has been updated and corrected. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07i2c: Add support for Ux500/Nomadik I2C controllersrinidhi kasagar
This adds support for ST-Ericsson's I2C block found in Ux500 and Nomadik 8815 platforms. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-07mfd: Fix lpc_sch related depends/selects, fix build errorRandy Dunlap
LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-07i2c: convert i2c-isch to platform_deviceDenis Turischev
Convert i2c-isch to platform_device for the lpc mfd core to add it at probe time. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-03-02i2c-parport-light: Add SMBus alert supportJean Delvare
Add support for the SMBus alert mechanism to the i2c-parport-light driver. The ADM1032 evaluation board at least is properly wired for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
2010-03-02i2c-parport: Add SMBus alert supportJean Delvare
Add support for the SMBus alert mechanism to the i2c-parport driver. The ADM1032 evaluation board at least is properly wired for this. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
2010-03-02i2c-i801: Add Intel Cougar Point device IDsSeth Heasley
Add the Intel Cougar Point (PCH) SMBus controller device IDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-02-27MIPS: I2C: Add driver for Cavium OCTEON I2C ports.Rade Bozic
Signed-off-by: Rade Bozic <rade.bozic.ext@nsn.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: rade.bozic.ext@nsn.com Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-06i2c-voodoo3: DeleteJean Delvare
Superseded by tdfxfb. I2C/DDC support used to live in a separate driver but this caused driver conflicts. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
2009-11-07i2c-piix4: Modify code name SB900 to Hudson-2Crane Cai
Change SB900 to its formal code name Hudson-2. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-24Merge branch 'origin' into for-linusRussell King
Conflicts: MAINTAINERS
2009-09-18i2c: Clearly mark ACPI drivers as suchJean Delvare
Now that we have ACPI-based SMBus controller drivers, and we will start telling users to use them instead of native drivers when I/O resources conflict, I think it would be good to clearly mark ACPI drivers as such in Kconfig. This is exactly the same as we just did for hwmon drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Crane Cai <crane.cai@amd.com>
2009-09-18i2c: Add driver for SMBus Control Method InterfaceCrane Cai
This driver supports the SMBus Control Method Interface. It needs BIOS declare ACPI control methods which described in SMBus Control Method Interface Spec. http://smbus.org/specs/smbus_cmi10.pdf Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-18i2c-piix4: Add AMD SB900 SMBus device IDCrane Cai
Add new SMBus device ID for AMD SB900. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-10[ARM] pxa: update dependancy of pxa i2c moduleHaojian Zhuang
PXA I2C module is also used in Marvell PXA168 and PXA910 series. Update the module dependancy of PXA I2C. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-25i2c: fix build bug in i2c-designware.cIngo Molnar
This build error triggers on x86: drivers/built-in.o: In function `i2c_dw_init': i2c-designware.c:(.text+0x4e37ca): undefined reference to `clk_get_rate' drivers/built-in.o: In function `dw_i2c_probe': i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to `clk_get' i2c-designware.c:(.devinit.text+0x51f76): undefined reference to `clk_enable' i2c-designware.c:(.devinit.text+0x520ff): undefined reference to `clk_disable' i2c-designware.c:(.devinit.text+0x52108): undefined reference to `clk_put' Because this new driver uses the clk_*() facilities which is an ARM-only thing currently. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-24i2c: driver for the Synopsys DesignWare I2C controllerBaruch Siach
The i2c Linux driver for the DesignWare i2c block of Synopsys, which is meant for AMBA Peripheral Bus. This i2c block is used on SoC chips like the ARM9 based PVG610. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16i2c-stu300: Make driver depend on MACH_U300Linus Walleij
This makes the stu300 driver for the ST Micro ST DDC I2C bus driver depend on MACH_U300, new platforms reusing this I2C driver will need to add in a similar dependency. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> [ben-linux@fluff.org: re-aranged subject line] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16i2c: ST DDC I2C U300 bus driver v3Linus Walleij
This adds support for the ST Microelectronics DDC I2C bus driver. This bus is used in the U300 architecture recently added to RMK:s ARM tree. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Ben Dooks <ben-linux@fluff.org> Reviewed-by: Jean Delvare <khali@linus-fr.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-15i2c-viapro: Add new PCI device ID for VX855Harald Welte
The south bridge of the VIA VX855 chipset has a different PCI Device ID so i2c-viapro.c needs to be updated with this. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-13i2c: Blackfin TWI: make sure we don't end up with a CLKDIV=0Michael Hennerich
Make sure we don't end up with an invalid CLKDIV=0 in case someone specifies 20kHz SCL or less (5 * 1024 / 20 = 0x100). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> [ben-linux@fluff.org: shortened subject line] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-12i2c: Enable i2c-s3c2410 for S3C64XX tooMark Brown
This controller is also present on the S3C64xx series processors so enable the driver in Kconfig for those platforms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-13i2c-voodoo3: Deprecate in favor of tdfxfbJean Delvare
Support for I2C/DDC was recently added to the tdfxfb driver, which means that the i2c-voodoo3 driver can be deprecated. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
2009-04-07i2c: xtensa s6000 i2c driverOskar Schirmer
Support for the s6000 on-chip i2c controller. Signed-off-by: Oskar Schirmer <os@emlix.com> Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07i2c: iMX/MXC supportDarius Augulis
Implementation of I2C Adapter/Algorithm Driver for I2C Bus integrated in Freescale's i.MX/MXC processors. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-28i2c-piix4: Add support for the Broadcom HT1100 chipsetFlavio Leitner
Add support for the Broadcom HT1100 LD chipset (SMBus function.) Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-28i2c-algo-pca: Add PCA9665 supportMarco Aurelio da Costa
Add support for the PCA9665 I2C controller. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-22i2c-i801: Add support for Intel Ibex PeakSeth Heasley
Adds the Intel Ibex Peak (PCH) SMBus Controller Device IDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-14i2c: Only build Tyan SMBus mux drivers on x86Jean Delvare
The two Tyan SMBus mux drivers (i2c-amd756-s4882 and i2c-nforce2-s4985) are only useful on specific x86 motherboards, so there is no point in letting them be built on other architectures. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-14i2c-viapro: Add VX800/VX820 supportRudolf Marek
Thanks to new datasheets published on http://linux.via.com.tw we can now add support for VX800/VX820 chipsets. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-14i2c: Renesas Highlander FPGA SMBus supportPaul Mundt
This adds support for the SMBus adapter found in the various FPGAs on the Renesas Highlander platforms. Particularly the R0P7780LC0011RL and R0P7785LC0011RL FPGAs. Functionality is fairly restricted, in that only byte and block data transfers are supported. Normal/fast mode and IRQ/polling are also supported. Primarily used for various RTCs and thermal sensors. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllersJochen Friedrich
This driver uses the port of 2.4 code from Vitaly Bordug <vitb@kernel.crashing.org> and the actual algorithm used by the i2c driver of the DBox code on cvs.tuxboc.org from Felix Domke (tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and CPM2 (MPC8272). Signed-off-by: Jochen Friedrich <jochen@scram.de> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14i2c: Add Intel SCH SMBus supportAlek Du
New i2c bus driver for the Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L). Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14i2c: Group bus drivers by typeJean Delvare
The list of I2C/SMBus bus drivers is growing and it is sometimes difficult for the users to figure out what drivers they should enable. By grouping the drivers by type, I hope to make the selection easier. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14i2c-bfin-twi: Update the dependenciesMike Frysinger
Since only a few Blackfins lack TWI, just list them in a depends statement. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14i2c: Remove 3 deprecated bus driversAdrian Bunk
This patch contains the scheduled removal of i2c-i810, i2c-prosavage and i2c-savage4. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14i2c-nforce2: Add support for multiplexing on the Tyan S4985Jean Delvare
Just like the Tyan S4882, the S4985 uses a multiplexer to give access to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985 driver adds support for this. It is heavily based on the older i2c-amd756-s4882 driver. As more mainboards will use multiplexer chips, we will have to find a way to support them without having to write a new specfic driver for each. The recent changes to the i2c subsystem should help us, and the new gpio subsystem might help, too. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22i2c: New driver for the SuperH Mobile I2C bus controllerMagnus Damm
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master only driver for the I2C block included in processors such as sh7343, sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22i2c-bfin-twi: Just let i2c-bfin-twi driver depends on BLACKFINBryan Wu
Simply use "depends on BLACKFIN" (which is technically correct) and just document which machines have the device. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22i2c-bfin-twi: Add platform_resource interface to support multi-port TWI ↵Bryan Wu
controllers - Dynamic alloc the resource of TWI driver data according to board information - TWI register read/write accessor based on dynamic regs_base - Support TWI0/TWI1 for BF54x Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22i2c: Remove trailing whitespaces in busses/KconfigWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22i2c: Renesas SH7760 I2C master driverManuel Lauss
Driver for I2C interfaces in master mode on SH7760. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22i2c-ibm_iic: Support building as an of_platform driverSean MacLennan
This patch allows the i2c-ibm_iic driver to be built either as an ocp driver or an of_platform driver. This allows it to run under the powerpc arch but maintains backward compatibility with the ppc arch. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-04-22i2c: Add platform driver on top of the new pca-algorithmWolfram Sang
Tested on a blackfin. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-03-27plat-orion: make i2c-mv64xxx available for all Orion familiesLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-23i2c-bfin-twi: Disable BF54x support for nowBryan Wu
The i2c-bfin-twi driver doesn't support BF54x for now due to missing header definitions causing the build to fail. Exclude it for now, it will be enabled again later. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24i2c-i801: Add support for the ICH10Gaston, Jason D
Add the Intel ICH10 SMBus Controller DeviceID's and updates Tolapai support. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 18:46:21 +0000