| Age | Commit message (Collapse) | Author |
|---|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
buttons in FSO?]
Michael 'Mickey' Lauer wrote:
...
> The problem is (and this is the reason why I'm crossposting this to the
> kernel mailing list), the kernel is not swallowing the power button
> presses that triggers the resume, so you need some "real" programming
> (as opposed to the expressional complexity of our rules) in order to
> prevent falling asleep right after resume.
>
> Kernel-guys, can we change that?
suppress-resume-onkey-event.patch
This suppresses the key press and key release events from the
power button, in the case where the power button is the wake
event for the GTA01 or GTA02 device.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
This patch is the pcf50606 equivalent of the pcf50633 patch that
disables interrupts from the chip until after resume is complete.
In order to ensure no data is lost, the work function is called
post-resume to process any pending interrupts.
Most of the code was quite literally re-used from Andy Green's
original patch.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Uses bus_create_device_link to correctly create the gllin compat link.
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Subject: [PATCH] [janitor] make checkpatch.pl happy
|
|
I don't know what device the symlink should be linked
against on GTA01, somebody that does know needs to edit
it in where it says "FIXME"... I think the supplied method
can work OK otherwise.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
struct input_dev in include/linux/input.h used to have a union
cdev which contained the associated device struct pointer. This
got simplified out in 2.6.25, so this patch removes cdev from
our drivers that used it before.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
GTA01 -only
Restore power button functionality after resume operation
Per Werner's suggestion, run the PMU interrupt handler immediately after resume
to clear/handle any pending interrupts from that device. This appears to
resolve the dead-powerbutton-after-resume problem. This is not well-tested;
need feedback to see if there are any side-effects or other problems.
From BZ 1313
Signed-off-by: Mike Wester <mwester@dis.net>
|
|
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Hey,
the legacy application 'atd' from Russ Nelson/Nils Faerber, used by Qtopia, to
schedule alarms currently fails to start as the the above ioctl is failing.
The other drivers in drivers/rtc implement the above ioctl and we can
implement it too.
The code to mask/unmask the RTC alarm is copied from the set_alarm routine and
adapted to use the reg_set_bit_mask and reg_set_clear_mask.
It is compiling, so it must work. Please welcome me the lkml way ;)
Signed-Off-by: Holger Hans Peter Freyther <zecke@openmoko.org>
|
|
--- linux-2.6.22/drivers/i2c/chips/pcf50606.c.orig 2008-01-17 22:30:16.000000000 -0800
+++ linux-2.6.22/drivers/i2c/chips/pcf50606.c 2008-01-17 22:31:43.000000000 -0800
@@ -71,12 +71,19 @@
I2C_CLIENT_INSMOD_1(pcf50606);
-#define PCF50606_F_CHG_FAST 0x00000001 /* Charger Fast allowed */
-#define PCF50606_F_CHG_PRESENT 0x00000002 /* Charger present */
-#define PCF50606_F_CHG_FOK 0x00000004 /* Fast OK for battery */
-#define PCF50606_F_CHG_ERR 0x00000008 /* Charger Error */
-#define PCF50606_F_CHG_PROT 0x00000010 /* Charger Protection */
-#define PCF50606_F_CHG_READY 0x00000020 /* Charging completed */
+#define PCF50606_B_CHG_FAST 0 /* Charger Fast allowed */
+#define PCF50606_B_CHG_PRESENT 1 /* Charger present */
+#define PCF50606_B_CHG_FOK 2 /* Fast OK for battery */
+#define PCF50606_B_CHG_ERR 3 /* Charger Error */
+#define PCF50606_B_CHG_PROT 4 /* Charger Protection */
+#define PCF50606_B_CHG_READY 5 /* Charging completed */
+
+#define PCF50606_F_CHG_FAST (1<<PCF50606_B_CHG_FAST) /* Charger Fast allowed */
+#define PCF50606_F_CHG_PRESENT (1<<PCF50606_B_CHG_PRESENT) /* Charger present */
+#define PCF50606_F_CHG_FOK (1<<PCF50606_B_CHG_FOK) /* Fast OK for battery */
+#define PCF50606_F_CHG_ERR (1<<PCF50606_B_CHG_ERR) /* Charger Error */
+#define PCF50606_F_CHG_PROT (1<<PCF50606_B_CHG_PROT) /* Charger Protection */
+#define PCF50606_F_CHG_READY (1<<PCF50606_B_CHG_READY) /* Charging completed */
#define PCF50606_F_CHG_MASK 0x000000fc
#define PCF50606_F_PWR_PRESSED 0x00000100
@@ -1026,12 +1033,12 @@
static DEVICE_ATTR(chgmode, S_IRUGO | S_IWUSR, show_chgmode, set_chgmode);
static const char *chgstate_names[] = {
- [PCF50606_F_CHG_FAST] = "fast_enabled",
- [PCF50606_F_CHG_PRESENT] = "present",
- [PCF50606_F_CHG_FOK] = "fast_ok",
- [PCF50606_F_CHG_ERR] = "error",
- [PCF50606_F_CHG_PROT] = "protection",
- [PCF50606_F_CHG_READY] = "ready",
+ [PCF50606_B_CHG_FAST] = "fast_enabled",
+ [PCF50606_B_CHG_PRESENT] = "present",
+ [PCF50606_B_CHG_FOK] = "fast_ok",
+ [PCF50606_B_CHG_ERR] = "error",
+ [PCF50606_B_CHG_PROT] = "protection",
+ [PCF50606_B_CHG_READY] = "ready",
};
static ssize_t show_chgstate(struct device *dev, struct device_attribute *attr,
|
|
|
|
Moved shared PMU code from pcf50606.h and pcf50633.h (which prevented inclusion
of both at the same time) to pcf506xx.h
- include/linux/pcf50606.h (struct pmu_voltage_rail, enum pmu_event, pmu_cb):
moved to pcf506xx.h
- include/linux/pcf50633.h (struct pmu_voltage_rail, enum pmu_event, pmu_cb):
moved to pcf506xx.h
Signed off-by: Werner Almesberger <werner@openmoko.org>
|
|
This is a NXP PCF50606 power management unit driver.
The PCF50606 is used in the FIC/OpenMoko Neo1973 GTA01 GSM phone.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
