aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2006-09-25[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33xLennert Buytenhek
Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3816/1: iop3xx: rename config symbolsLennert Buytenhek
Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-31Merge branch 'merge'Paul Mackerras
2006-08-26[PATCH] i2c: tps65010 build fixesDavid Brownell
The tps65010.c driver in the main tree never got updated with build fixes since the last batch of I2C driver changes; and the genirq trigger flags were updated wierdly too. This also includes a minor tweak to reduce the frequency used to poll for unplug-the-AC-power on the TPS chips that don't provide relevant IRQs. It _would_ be nice to sense whether there's even a battery, but that'd normally be an HDQ/1-wire interface to a smart battery, and such APIs aren't standardized. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-08Merge branch 'merge'Paul Mackerras
2006-08-06[PATCH] SCX200_ACB: eliminate spurious timeout errorsDavid Woodhouse
While busy-waiting for completion, check the hardware after scheduling; don't schedule and then immediately check the _timeout_. If the yield() took a long time (as it does on my OLPC prototype board when it's busy), we'd report a timeout even though the hardware was now ready. This fixes it, and also switches the yield() for a cond_resched() because we don't actually want to be _that_ nice about it. I see nice tightly-packed SMBus transactions now, rather than waiting for milliseconds between successive phases. Actually, we shouldn't be busy-waiting here at all. We should be using interrupts. That's an exercise for another day though. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Christer Weinigel <wingel@nano-system.com> Cc: <Jordan.Crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-01Merge branch 'merge'Paul Mackerras
2006-07-31[POWERPC] powermac: Constify & voidify get_property()Jeremy Kerr
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-12[PATCH] pca9539: Honor the force parameterBen Gardner
The pca9539 driver doesn't honor the force parameter; it always does detection. This patch will skip detection if forced. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] i2c-algo-bit: Wipe out dead codeUwe Bugla
i2c-algo-bit: Wipe out dead code Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm driversMark M. Hoffman
Content-Disposition: inline; filename=i2c-algo-error-handling-fix.patch It is possible for i2c_add_adapter() to fail. Several I2C algorithm drivers ignore that fact. This (compile-tested only) patch fixes them. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] i2c-powermac: Fix master_xfer return valueJean Delvare
Fix the value returned by the i2c-powermac's master_xfer method. It should return the number of messages processed successfully, but instead returns the number of data bytes in the first (and only) processed message. Also explicitly mention the master_xfer convention so that future implementations get it right directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] scx200_acb: Fix the block transactionsJean Delvare
The scx200_acb i2c bus driver pretends to support SMBus block transactions, but in fact it implements the more simple I2C block transactions. Additionally, it lacks sanity checks on the length of the block transactions, which could lead to a buffer overrun. This fixes an oops reported by Alexander Atanasov: http://marc.theaimsgroup.com/?l=linux-kernel&m=114970382125094 Thanks to Ben Gardner for fixing my bugs :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] scx200_acb: Fix the state machineThomas Andrews
Fix the scx200_acb state machine: * Nack was sent one byte too late on reads >= 2 bytes. * Stop bit was set one byte too late on reads. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] i2c-iop3xx: Avoid addressing selfPeter Milne
Avoid addressing self when sending a slave address. Follows instruction in Intel 80331/80321 manuals. Ignoring this worked previously on 80321, but causes a hang on i2cdetect on 80331. Signed-off-by: Peter Milne <peter.milne@d-tacq.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] i2c: Fix 'ignore' module parameter handling in i2c-coreMark M. Hoffman
This patch fixes a bug in the handling of 'ignore' module parameters of I2C client drivers. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-02[PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30[PATCH] i2c-801: 64bit resource fixAndrew Morton
drivers/i2c/busses/i2c-i801.c: In function 'i801_probe': drivers/i2c/busses/i2c-i801.c:496: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'resource_size_t' Cc: Greg KH <greg@kroah.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] i2c-i801.c: don't pci_disable_device() after it was just enabledDaniel Ritz
Commit 02dd7ae2892e5ceff111d032769c78d3377df970 ("[PATCH] i2c-i801: Merge setup function") has a missing return 0 in the _probe() function. This means the error path is always executed and pci_disable_device() is called even when the device just got successfully enabled. Having the SMBus device disabled makes some systems (eg. Fujitsu-Siemens Lifebook E8010) hang hard during power-off. Intead of reverting the whole commit this patch fixes it up: - don't ever call pci_disable_device(), also not in the _remove() function to avoid hangs - fix missing pci_release_region() in error path Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
2006-06-22[PATCH] I2C: I2C controllers go into right place on sysfsDavid Brownell
I2C creates some sysfs nodes in the wrong places: not as children of parent controllers, but as their peers (!). This puts them into the right place always, instead of just when the adapter is on the platform bus. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-i801: Merge setup functionJean Delvare
i2c-i801: Merge setup function Merge i801_setup into i801_probe, as it doesn't make much sense to have them split. This lets us handle errors better. Christopher Hellwig had been suggesting this back in March 2003 when the driver was merged. Also drop two useless debug messages (revision and base address can be obtained from lspci, procfs or sysfs.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-i801: Better pci subsystem integrationJean Delvare
i2c-i801: Better pci subsystem integration Integrate the i2c-i801 driver better with the pci subsystem, by calling pci_{enable,disable}_device and requesting the I/O region by BAR rather than direct configuration space access. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-i801: CleanupsJean Delvare
i2c-i801: Cleanups Various cleanups to the i2c-i801 driver: * Fix documentation file and self file name references. * i801_setup can be marked __devinit. * Drop useless error local variable and label in i801_setup. * Avoid a double PCI configuration register write in some cases. * Use symbolic names for SMBHSTCFG bits. * Transmit the error code returned by i801_setup instead of forcing it to an arbitrary value. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-i801: Remove PCI function checkJean Delvare
i2c-i801: Remove PCI function check Remove the PCI function number check when probing devices. This check is redundant, each function has a separate PCI device ID, so checking for that ID is sufficient. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-i801: Remove force_addr parameterJean Delvare
i2c-i801: Remove force_addr parameter Remove the force_addr module parameter. It doesn't appear to ever have been needed, and PCI resources shouldn't be arbitrarily changed anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-i801: Fix block transaction poll loopsJean Delvare
i2c-i801: Fix block transaction poll loops Two of the three poll loops have the poll and sleep swapped, causing an extra sleep to occur after the polled condition is fulfilled. In practice, this doubles the amount of sleep time for every block transaction. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] scx200_acb: Mark scx200_acb_probe __initJean Delvare
In i2c bus driver scx200_acb, function scx200_acb_probe can be tagged __init. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] scx200_acb: Use PCI I/O resource when appropriateJordan Crouse
On the CS5535 and CS5536, the I/O resource is allocated through PCI, so use that instead of using the MSR backdoor. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c: Mark block write buffers as constKrzysztof Halasa
The attached patch marks i2c_smbus_write_block_data() and i2c_smbus_write_i2c_block_data() buffers as const. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-ocores: Minor cleanupsPeter Korsgaard
Minor cleanup to the i2c-ocores driver. Peter Korsgaard will maintain the i2c-ocores driver. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c: New bus driver for the OpenCores I2C controllerPeter Korsgaard
The following patch adds support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c: Suggest N for rare devices in KconfigJean Delvare
Improve the Kconfig help text of the follwing i2c drivers: * busses/i2c-pca-isa.c * chips/pcf8574.c * chips/pcf8591.c These are hard to detect and building them into the kernel results in long delays at boot. March 2006, thread "I2C_PCA_ISA causes boot delays" http://marc.theaimsgroup.com/?l=linux-kernel&m=114360399415744&w=2 April 2006, thread "i2c-related 1-minute hang during bootup" http://marc.theaimsgroup.com/?l=linux-kernel&m=114640992330721&w=2 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55Jean Delvare
Add support for the new nForce4 MCP51 (also known as nForce 410 or 430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes were required because the base I/O address registers have changed in these versions. Standard BARs are now being used, while the original nForce2 chips used non-standard ones. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] I2C: i2c-piix4: Document the IBM problem more clearlyJean Delvare
Properly document on which systems the i2c-piix4 SMBus driver will refuse to load. Hopefully this will make it clearer for users, which were often wondering why their destop or server systems were detected as laptops. Closes bug #6429. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] I2C: i2c-piix4: Remove the fix_hstcfg parameterRudolf Marek
This patch removes the fix_hstcfg option from the driver and related SMBus Interrupt Select register magic because now we know what are valid values for this register. This patch updates the documentation and adds new IRQ mode check so we are sure not to miss any new "unusual" value. The PCI quirk for users of fix_hstcfg was not developed because the chipset lacks of subsystem ID registers and DMI is stated "To be filled". Impact to existing systems is minimal because the problem showed up on motherboards like 10 years back. On the other hand users of newer Serverworks and HT1000 systems won't be misleaded by the message suggesting to try the fix_hstcfg any more. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] I2C: m41t00: Add support for the ST M41T81 and M41T85Mark A. Greer
This patch adds support for the ST m41t81 and m41t85 i2c rtc chips to the existing m41t00 driver. Since there is no way to reliably determine what type of rtc chip is in use, the chip type is passed in via platform_data. The i2c address and square wave frequency are passed in via platform_data as well. To accommodate the use of platform_data, a new header file include/linux/m41t00.h has been added. The m41t81 and m41t85 chips halt the updating of their time registers while they are being accessed. They resume when a stop condition exists on the i2c bus or when non-time related regs are accessed. To make the best use of that facility and to make more efficient use of the i2c bus, this patch replaces multiple i2c_smbus_xxx calls with a single i2c_transfer call. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c: cleanup m41t00Mark A. Greer
This patch does some cleanup to the m41t00 i2c/rtc driver including: - use BCD2BIN/BIN2BCD instead of BCD_TO_BIN/BIN_TO_BCD - use strlcpy instead of strncpy - some whitespace cleanup Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-22[PATCH] i2c-piix4: Add ATI IXP200/300/400 supportRudolf Marek
This patch adds the ATI IXP southbridges support to i2c-piix4, as it turned out those chips are compatible with it. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[POWERPC] Document I2C_MPC option for 86xx too.Jon Loeliger
The same I2C driver found on 85xx, etc., can be used for 86xx too. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-26[PATCH] scx200_acb: fix section mismatch warningRandy Dunlap
WARNING: drivers/i2c/busses/scx200_acb.o - Section mismatch: reference to .init.text: from .text after 'scx200_add_cs553x' (at offset 0x528) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-09[PATCH] scx200_acb: Fix for the CS5535 errataJordan Crouse
This is a fix for the CS5535 errata 111: When the SMBus controller tries to access a non-existing device, it sets the NEGACK bit, SMBus I/O offset 01h[4], to 1 after it detects no acknowledge at the ninth clock. The specification states that the bit can be cleared by writing a 1 to it, but under certain circumstances it is possible for this bit to not clear. Writing a 0 to the bit resets the internal state machine and clears the issue. Since all writable bits in ACBST are W1C bits (write-one-to-clear) the second write doesn't affect any other logic except the buggy NEGACK state machine. The second write clears an internal register which is responsible for "overwriting" the NEGACK bit in ACBST. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-09[PATCH] scx200_acb: Fix resource name use after freeJean Delvare
We can't pass a string on the stack to request_region. As soon as we leave the function that stack is gone and the string is lost. Let's use the same string we identify the i2c_adapter with instead, it's more simple, more consistent, and just works. This is the second half of fix to bug #6445. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-09[PATCH] scx200_acb: Fix return on init errorJean Delvare
The scx200_acb driver shouldn't return failure after initialization if it successfully registered at least one i2c_adapter, else we are leaking resources. The driver was OK in that respect up to 2.6.16, a recent change broke it. This is part of the fix to bug #6445. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-20[PATCH] i2c-i801: Fix resume when PEC is usedJean Delvare
Fix for bug #6395: Fail to resume on Tecra M2 with ADM1032 and Intel 82801DBM The BIOS of the Tecra M2 doesn't like it when it has to reboot or resume after the i2c-i801 driver has left the SMBus in PEC mode. The most simple fix is to clear the PEC bit after after every transaction. That's what this driver was doing up to 2.6.15 (inclusive). Thanks to Daniele Gaffuri for the very good report. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-19[PATCH] m41t00: fix bitmasks when writing to chipDavid Barksdale
Fix the bitmasks used when writing to the M41T00 registers. The original code used a mask of 0x7f when writing to each register, this is incorrect and probably the result of a copy-paste error. As a result years from 1980 to 1999 will be read back as 2000 to 2019. Signed-off-by: David Barksdale <amatus@ocgnet.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-14[PATCH] i2c-parport: Make type parameter mandatoryMark M. Hoffman
This patch forces the user to specify what type of adapter is present when loading i2c-parport or i2c-parport-light. If none is specified, the driver init simply fails - instead of assuming adapter type 0. This alleviates the sometimes lengthy boot time delays which can be caused by accidentally building one of these into a kernel along with several i2c slave drivers that have lengthy probe routines (e.g. hwmon drivers). Kconfig and documentation updated accordingly. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] i2c-sis96x: Remove an init-time log messageMark M. Hoffman
This patch removes an init-time kernel log message. http://marc.theaimsgroup.com/?l=linux-kernel&m=114232987208628&w=3 Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>