aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)Author
2009-03-03Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] fix lots of ARM __devexit sillyness [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU [ARM] 5416/1: Use unused address in v6_early_abort [ARM] 5411/1: S3C64XX: Fix EINT unmask [ARM] at91: fix for Atmel AT91 powersaving [ARM] RiscPC: Fix etherh oops
2009-03-03[ARM] fix lots of ARM __devexit sillynessRussell King
`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o `pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-24Add i2c_board_info for RiscPC PCF8583Russell King
Add the necessary i2c_board_info structure to fix the lack of PCF8583 RTC on RiscPC. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it>
2009-02-24i2c: Make sure i2c_algo_bit_data.timeout is HZ-independentJean Delvare
i2c_algo_bit_data.timeout is supposed to be in jiffies, so drivers should use set this value in terms of HZ. Ultimately I think this field should be discarded in favor of i2c_adapter.timeout, but that's left for a future patch. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Lennert Buytenhek <kernel@wantstofly.org> Acked-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
2009-02-24i2c-dev: Clarify the unit of ioctl I2C_TIMEOUTJean Delvare
The unit in which user-space can set the bus timeout value is jiffies for historical reasons (back when HZ was always 100.) This is however not good because user-space doesn't know how long a jiffy lasts. The timeout value should instead be set in a fixed time unit. Given the original value of HZ, this unit should be 10 ms, for compatibility. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2009-02-24i2c: Timeouts reach -1Roel Kluin
With a postfix decrement these timeouts reach -1 rather than 0, but after the loop it is tested whether they have become 0. As pointed out by Jean Delvare, the condition we are waiting for should also be tested before the timeout. With the current order, you could exit with a timeout error while the job is actually done. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-02-24i2c: Fix misplaced parenthesesRoel Kluin
Fix misplaced parentheses. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26i2c: Move old eeprom driver to /drivers/misc/eepromWolfram Sang
Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26i2c: Move at24 to drivers/misc/eepromWolfram Sang
As drivers/i2c/chips is going to go away, move the driver to drivers/misc/eeprom. Other eeprom drivers may be moved here later, too. Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26i2c: Delete many unused adapter IDsJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-13powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/Anton Vorontsov
This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/ directory. The new location suggested by Kumar Gala: as the driver is 83xx specific it's placed into arch/powerpc/platforms/83xx/. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (123 commits) wimax/i2400m: add CREDITS and MAINTAINERS entries wimax: export linux/wimax.h and linux/wimax/i2400m.h with headers_install i2400m: Makefile and Kconfig i2400m/SDIO: TX and RX path backends i2400m/SDIO: firmware upload backend i2400m/SDIO: probe/disconnect, dev init/shutdown and reset backends i2400m/SDIO: header for the SDIO subdriver i2400m/USB: TX and RX path backends i2400m/USB: firmware upload backend i2400m/USB: probe/disconnect, dev init/shutdown and reset backends i2400m/USB: header for the USB bus driver i2400m: debugfs controls i2400m: various functions for device management i2400m: RX and TX data/control paths i2400m: firmware loading and bootrom initialization i2400m: linkage to the networking stack i2400m: Generic probe/disconnect, reset and message passing i2400m: host/device procotol and core driver definitions i2400m: documentation and instructions for usage wimax: Makefile, Kconfig and docbook linkage for the stack ...
2009-01-07USB: move isp1301_omap to drivers/usb/otgDavid Brownell
This moves the isp1301-omap driver from the drivers/i2c/chips directory (which will be shrinking) into a new drivers/usb/otg directory (which will grow, with more drivers and utilities). Note that OTG infrastructure needs to be initialized before either host or peripheral side USB support, and may be needed before for pure host or pure peripheral configurations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07i2c: Use snprintf to set adapter namesJean Delvare
Use snprintf instead of sprintf to set adapter names, it's safer. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-07Input: apanel - convert to new i2c bindingJean Delvare
Convert the apanel driver to the new i2c device driver binding model, as the legacy model is going away soon. In the new model, the apanel driver is no longer scanning all the i2c adapters, instead the relevant bus driver (i2c-i801) is instantiating the device as needed. One side benefit is that the apanel driver will now load automatically on all systems where it is needed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org>
2009-01-07i2c: Drop I2C_CLASS_ALLJean Delvare
I2C_CLASS_ALL is almost never what bus driver authors really want. These i2c classes are really only about which devices must be probed, not what devices can be present. As device drivers get converted to the new i2c device driver model, only a few device types will keep relying on probing. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Sonic Zhang <sonic.zhang@analog.com>
2009-01-07i2c: Get rid of remaining bus_id accessJean Delvare
Use dev_name(dev) instead of accessing dev.bus_id directly, as the latter is going away soon. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org>
2009-01-07i2c: Replace bus_id with dev_name(), dev_set_name()Kay Sievers
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-05Merge branch 'for-next' of git://git.o-hand.com/linux-mfdLinus Torvalds
* 'for-next' of git://git.o-hand.com/linux-mfd: (30 commits) mfd: Fix section mismatch in da903x mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd mfd: dm355evm msp430 driver mfd: Add missing break from wm3850-core mfd: Add WM8351 support mfd: Support configurable numbers of DCDCs and ISINKs on WM8350 mfd: Handle missing WM8350 platform data mfd: Add WM8352 support mfd: Use irq_to_desc in twl4030 code power_supply: Add Dialog DA9030 battery charger driver mfd: Dialog DA9030 battery charger MFD driver mfd: Register WM8400 codec device mfd: Pass driver_data onto child devices mfd: Fix twl4030-core.c build error mfd: twl4030 regulator bug fixes mfd: twl4030: create some regulator devices mfd: twl4030: cleanup symbols and OMAP dependency mfd: twl4030: simplified child creation code power_supply: Add battery health reporting for WM8350 ...
2009-01-05Merge branch 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-omap: fix type of irq handler function i2c-s3c2410: Change IRQ to be plain integer. i2c-s3c2410: Allow more than one i2c-s3c2410 adapter i2c-s3c2410: Remove default platform data. i2c-s3c2410: Use platform data for gpio configuration i2c-s3c2410: Fixup style problems from checkpatch.pl i2c-omap: Enable I2C wakeups for 34xx i2c-omap: reprogram OCP_SYSCONFIG register after reset i2c-omap: convert 'rev1' flag to generic 'rev' u8 i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle() i2c-omap: Clean-up i2c-omap i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds i2c-omap: Mark init-only functions as __init i2c-omap: Add support for omap34xx i2c-omap: FIFO handling support and broken hw workaround for i2c-omap i2c-omap: Add high-speed support to omap-i2c i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Fix up apparently-trivial conflict in drivers/i2c/busses/i2c-s3c2410.c
2009-01-05Merge branch 'i2c-next-s3c' into i2c-nextBen Dooks
2009-01-04mfd: move drivers/i2c/chips/menelaus.c to drivers/mfdDavid Brownell
ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: move drivers/i2c/chips/tps65010.c to drivers/mfdDavid Brownell
Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-22sh: sh_mobile i2c clock framework supportMagnus Damm
Add clock framework support to the sh_mobile i2c driver and adjust the processor specific code accordingly. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-17Merge branch 'mxc-pu-imxfb' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6 into devel
2008-12-16i2c-omap: fix type of irq handler functionBen Dooks
The probe function used a pointer to the interrupt handler to register as a 'void *', change it to the proper type of irq_handler_t. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16Merge branch 'i2c-for-ben' of ↵Ben Dooks
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into i2c-next
2008-12-16i2c-s3c2410: Change IRQ to be plain integer.Ben Dooks
Change the code to use a plain integer as the holder for the IRQ for the device and use platform_get_irq() to find it. This makes the code slightly neater, and easier to get the IRQ number. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16i2c-s3c2410: Allow more than one i2c-s3c2410 adapterBen Dooks
Newer SoCs such as the S3C6410 have 2 instances of this i2c controller block in and thus require the ability to create two seperate busses from this. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16i2c-s3c2410: Remove default platform data.Ben Dooks
The platform data should now always be present when the device is initialised, so we can remove the default platform data in the driver. All the device initialisation points in the board specific code should already have been changed to initialise this as necessary. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16i2c-s3c2410: Use platform data for gpio configurationBen Dooks
Add a callback to set the gpio configuration for the i2c device instead of a set include. This also allows the remvoal of the machine gpio and hardware files. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16i2c-s3c2410: Fixup style problems from checkpatch.plBen Dooks
Fixup the 36 warnings and errors generated from running checkpatch.pl on the driver. The warnings are too numerous to be listed here. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16i2c-s3c2410: fix check for being in suspend.Ben Dooks
As noted by Julia Lawall <julia@diku.dk>, we can never trigger the check for being in suspend due to the result of !readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN always being 0. Add suspend/resume hooks to stop i2c transactions happening until the driver has been resumed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16i2c-cpm: Detect and report NAK right away instead of timing outMike Ditto
Make the driver report an ENXIO error immediately upon NAK instead of waiting for another interrupt and getting a timeout. When reading from a device that is not present or declines to respond to, e.g., a non-existent register address, CPM immediately reports a NAK condition in the TxBD, but the driver kept waiting until a timeout, which takes 1 second and causes an ugly console error message. Signed-off-by: Mike Ditto <mditto@consentry.com> Acked-by: Jochen Friedrich <jochen@scram.de> [ben-linux@fluff.org: reordered description text] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-13Merge git://git.marvell.com/orion into develRussell King
2008-12-11i2c-highlander: Trivial endian casting fixesHarvey Harrison
Fixes sparse warnings: drivers/i2c/busses/i2c-highlander.c:95:26: warning: incorrect type in argument 1 (different base types) drivers/i2c/busses/i2c-highlander.c:95:26: expected restricted __be16 const [usertype] *p drivers/i2c/busses/i2c-highlander.c:95:26: got unsigned short [usertype] *<noident> drivers/i2c/busses/i2c-highlander.c:106:15: warning: incorrect type in assignment (different base types) drivers/i2c/busses/i2c-highlander.c:106:15: expected unsigned short [unsigned] [short] [usertype] <noident> drivers/i2c/busses/i2c-highlander.c:106:15: got restricted __be16 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-12-11i2c-pmcmsp: Fix endianness misannotationHarvey Harrison
tmp is used as host-endian and is loaded from a be64, fix the cast and the endian accessor used. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-11-29Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2008-11-28i2c-parport: Fix misplaced parport_release callJean Delvare
We shouldn't release the parallel port until we are actually done with it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-11-28i2c: Remove i2c clients in reverse orderJean Delvare
i2c clients should be removed in reverse order compared to the probe (actually: bind) order. This matters when several clients depend on each other. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2008-11-28i2c/isp1301_omap: Build fixesDavid Brownell
Build fixes for isp1301_omap; no behavior changes: - fix incorrect probe() signature (it changed many months ago) - provide missing functions on H3 and H4 boards - "sparse" fixes (static, NULL-vs-0) The H3 build bits subset some of the stuff that was previously in the OMAP tree but never went to mainline. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-11-27[ARM] pxa: don't pass a consumer clock name for devices with unique clocksRussell King
Where devices only have one consumer, passing a consumer clock ID has no real benefit. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-21i2c-omap: Enable I2C wakeups for 34xxKalle Jokiniemi
I2C_WE registers were not configured, which caused huge delays in I2C operations while cpu idle was enabled and omap entered WFI. This patch enables all I2C wakeup sources. Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-21i2c-omap: reprogram OCP_SYSCONFIG register after resetPaul Walmsley
The I2C controller clears its OCP_SYSCONFIG register after an OCP soft reset. Reprogram OCP_SYSCONFIG for maximum power savings on rev3.6 controllers and beyond. On 2430, this involves setting the module AUTOIDLE bit. On 3430, this includes module AUTOIDLE, wakeup enable, slave smart-idle, and considers only the module functional clock state for idle-ack. Boot-tested on 2430SDP and 3430SDP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-21i2c-omap: convert 'rev1' flag to generic 'rev' u8Paul Walmsley
i2c-omap discriminates only between "revision 1" or "greater than revision 1." A following patch introduces code that must also discriminate between rev2.x, rev3.6, and rev3.12 controllers. Support this by storing the full revision data from the I2C_REV register, rather than just a single bit. The revision definitions may need to be extended for other ES levels that aren't currently available here. rev3.6 is what's present on the 2430SDP here (unknown ES revision); rev3.12 is used on the 3430ES2 here. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-21i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()Paul Walmsley
omap_i2c_unidle() and omap_i2c_idle() are called recursively during omap_i2c_probe(). This is evidently unexpected and will wipe out the I2C interrupt enable register the second time that omap_i2c_idle() is called consecutively. Any I2C transactions following a probe of a bus with at least one device on it will then time out. Fix by moving omap_i2c_idle() further up in omap_i2c_probe(). Ensure the I2C controller is marked as idle before the probe starts. Also attempt to catch future reappearances of this bug early in development by warning in omap_i2c_{un,}idle() when they are called recursively. Problem reported by David Brownell <david-b@pacbell.net>. Tested on 3430SDP and 2430SDP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: David Brownell <david-b@pacbell.net> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by; Steve Sakoman <steve@sakoman.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-21i2c-omap: Clean-up i2c-omapTony Lindgren
Minor sparse, checkpatch and formatting clean-up. Also update copyrights. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-21i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx buildsPaul Walmsley
Skip compiling OMAP15xx I2C ISR for non-OMAP15xx builds. Saves 400 bytes of text for most OMAP builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-21i2c-omap: Mark init-only functions as __initPaul Walmsley
Mark functions called only at init time as __init. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>