aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/ide-probe.c
AgeCommit message (Collapse)Author
2008-10-17ide: remove IDE_AFLAG_NO_DOORLOCKINGBartlomiej Zolnierkiewicz
Just use IDE_DFLAG_DOORLOCKING instead. There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-16device create: ide: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-13ide: Implement disk shock protection support (v4)Elias Oltmanns
On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). Port resets are deferred whenever a device on that port is in the parked state. v3: Elias Oltmanns <eo@nebensachen.de> wrote: [...] > >> 1. Make sure that no negative value is being passed to > >> jiffies_to_msecs() in ide_park_show(). > >> 2. Drop the superfluous variable hwif in ide_special_rq(). > >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not > >> handling a (un)park request. > > > > Well, #3 should have been done differently because we donn't want to > > check for REQ_(UN)?PARK_HEADS more often than is necessary. > > While preparing the backport to 2.6.27, it has just occurred to me that > we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset() > because this flag must not be set after *any* sort of access to the > device. v4: Fix a memory leak due to a missing blk_put_request() in issue_park_cmd(). Additionally, we should plug the queue when enqueueing the unpark request because there is no guarantee that the park timeout has not expired by then. Even though the chance for that to happen is very slim, the request might end up hanging in the queue until the next I/O operation is queued up. While at it, clean up the code a little: - make issue_park_cmd() a function of type void since nobody cares for the return value anyway; - use blk_start_queueing() instead of __blk_run_queue() since we don't have to worry about recursion; - remove a superfluous pointer deference in task_no_data_intr(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org>, Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: Two fixes regarding memory allocationElias Oltmanns
In function ide_devset_execute() we should use __GFP_WAIT rather than GFP_KERNEL. Also, the allocation cannot possibly fail at that point. More importantly, there is a potential memory leak in the device probing code. The infrastructure seems rather complex and I hope I haven't messed anything up by trying to fix this. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> [bart: remove superfluous ide_lock taking] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: set IDE_AFLAG_DRQ_INTERRUPT in do_identify()Bartlomiej Zolnierkiewicz
Set IDE_AFLAG_DRQ_INTERRUPT in do_identify() instead of ATAPI device drivers *_setup() methods. While at it: - use ata_id_cdb_intr() There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove ide_host_alloc_all()Bartlomiej Zolnierkiewicz
* Remove no longer used ide_host_alloc_all(). * Add MAX_HOST_PORTS define and use it instead of MAX_HWIFS as the maximum number of host ports possible. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove [ata_]select_tBartlomiej Zolnierkiewicz
* Use 'drive->dn & 1' in ide_init_disk(). * remove [ata_]select_t. While at it: * Use ATA_DEVICE_OBS define in ide_port_init_devices_data(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: use 'drive->dn & 1' instead of drive->select.b.unitBartlomiej Zolnierkiewicz
* Call ide_port_init_devices() in ide_host_register() also if 'struct ide_port_info *d' is not available. * Init drive->dn in ide_port_init_devices() instead of ide_probe_port() so it is valid also in ->init_dev. * Pass device number to ide_dev_apply_params(). * Use 'drive->dn & 1' instead of drive->select.b.unit. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: add device flagsBartlomiej Zolnierkiewicz
Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13ide: remove unnecessary MAX_HWIFS checks from ide-probe.cBartlomiej Zolnierkiewicz
MAX_HWIFS is now always equal to the number of IDE major numbers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: add proper PCI PM support (v2)Bartlomiej Zolnierkiewicz
* Keep pointer to ->init_chipset method also in struct ide_host and set it in ide_host_alloc_all(). * Add ide_pci_suspend() and ide_pci_resume() helpers (default ->suspend and ->resume implementations). * ->init_chipset can no longer be marked __devinit. * Add proper PCI PM support to IDE PCI host drivers (rz1000.c and tc86c001.c are skipped for now since they need to be converted from using ->init_hwif to use ->init_chipset instead). v2: * Cleanup CONFIG_PM #ifdef-s per akpm's suggestion. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: use ata_id_is_cfa()Bartlomiej Zolnierkiewicz
Use ata_id_is_cfa() in do_identify() instead of open-coding check for CompactFlash devices (the inline helper also takes care of detecting CFs advertising themselves as ATA disks). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: remove SECTOR_WORDS defineBartlomiej Zolnierkiewicz
Just use SECTOR_SIZE instead. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: /proc/ide/hd*/settings reworkBartlomiej Zolnierkiewicz
* Add struct ide_devset, S_* flags, *DEVSET() & ide*_devset_*() macros. * Add 'const struct ide_devset **settings' to ide_driver_t. * Use 'const struct ide_devset **settings' in ide_drive_t instead of 'struct ide_settings_s *settings'. Then convert core code and device drivers to use struct ide_devset and co.: - device settings are no longer allocated dynamically for each device but instead there is an unique struct ide_devset instance per setting - device driver keeps the pointer to the table of pointers to its settings in ide_driver_t.settings - generic settings are kept in ide_generic_setting[] - ide_proc_[un]register_driver(), ide_find_setting_by_name(), ide_{read,write}_setting() and proc_ide_{read,write}_settings() are updated accordingly - ide*_add_settings() are removed * Remove no longer used __ide_add_setting(), ide_add_setting(), __ide_remove_setting() and auto_remove_settings(). * Remove no longer used TYPE_*, SETTING_*, ide_procset_t and ide_settings_t. * ->keep_settings, ->using_dma, ->unmask, ->noflush, ->dsc_overlap, ->nice1, ->addressing, ->wcache and ->nowerr ide_drive_t fields can now be bitfield flags. While at it: * Rename ide_find_setting_by_name() to ide_find_setting(). * Rename write_wcache() to set_wcache(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: remove CONFIG_IDEDISK_MULTI_MODEBartlomiej Zolnierkiewicz
Use multi PIO by default when available and remove no longer needed CONFIG_IDEDISK_MULTI_MODE (it should be safe nowadays, despite to what help entry has been saying). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: remove IDE_CHIPSET_* macrosBartlomiej Zolnierkiewicz
They just obfuscate the code. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: remove no longer needed BUG_ON()-s from init_irq()Bartlomiej Zolnierkiewicz
init_irq() is now called only during initial host registration so these BUG_ON()-s are no loner needed (+ the last one was done too late anyway). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: enhance ide_busy_sleep()Bartlomiej Zolnierkiewicz
* Make ide_busy_sleep() take timeout value as a parameter and also allow use of AltStatus Register if requested with altstatus parameter. Update existing users accordingly. * Convert ide_driveid_update() and actual_try_to_identify() to use ide_busy_sleep(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: fix EXABYTENEST handling in probe_for_drive()Bartlomiej Zolnierkiewicz
Fix EXABYTENEST handling in probe_for_drive() (so drive->present is checked for "nested" device) and cleanup enable_nest(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: use ATA_* defines instead of *_STAT and *_ERR onesBartlomiej Zolnierkiewicz
* ERR_STAT -> ATA_ERR * INDEX_STAT -> ATA_IDX * ECC_STAT -> ATA_CORR * DRQ_STAT -> ATA_DRQ * SEEK_STAT -> ATA_DSC * WRERR_STAT -> ATA_DF * READY_STAT -> ATA_DRDY * BUSY_STAT -> ATA_BUSY * MARK_ERR -> ATA_AMNF * TRK0_ERR -> ATA_TRK0NF * ABRT_ERR -> ATA_ABORTED * MCR_ERR -> ATA_MCR * ID_ERR -> ATA_IDNF * MC_ERR -> ATA_MC * ECC_ERR -> ATA_UNC * ICRC_ERR -> ATA_ICRC * BBD_ERR -> ATA_BBK Also: * ILI_ERR -> ATAPI_ILI * EOM_ERR -> ATAPI_EOM * LFS_ERR -> ATAPI_LFS * CD -> ATAPI_COD * IO -> ATAPI_IO Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: WIN_* -> ATA_CMD_*Bartlomiej Zolnierkiewicz
* Use ATA_CMD_* defines instead of WIN_* ones. While at it: * EXABYTE_ENABLE_NEXT -> ATA_EXABYTE_ENABLE_NEST * SETFEATURES_{EN,DIS}_WCACHE -> SETFEATURES_WC_{ON,OFF} * SETFEATURES_{EN,DIS}_AAM -> SETFEATURES_AAM_{ON,OFF} * SMART_* -> ATA_SMART_* * Remove stale comment from ide-proc.c. Partially based on earlier work by Chris Wedgwood. Acked-by: Chris Wedgwood <cw@f00f.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: use ata_id_current_chs_valid()Bartlomiej Zolnierkiewicz
Replace open-coded checks by ata_id_current_chs_valid(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: remove drive->driveidBartlomiej Zolnierkiewicz
* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling to ide_get_identity_ioctl(). * Use temporary buffer in ide_get_identity_ioctl() instead of accessing drive->id directly. * Add ide_id_to_hd_driveid() inline to convert raw id into struct hd_driveid format (needed on big-endian). * Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(), cleanup ide_fix_driveid() and switch ide to use use raw id. * Remove no longer needed drive->driveid. This leaves us with 3 users of struct hd_driveid in tree: - arch/um/drivers/ubd_kern.c - drivers/block/xsysace.c - drivers/usb/storage/isd200.c While at it: * Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: make drive->id an union (take 2)Bartlomiej Zolnierkiewicz
Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: cleanup ide_disk_init_mult_count()Bartlomiej Zolnierkiewicz
* Remove superfluous checks for drive->mult_req. * No need to zero drive's fields. * Move the common code out of #ifdef scope. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-09block: implement and use {disk|part}_to_dev()Tejun Heo
Implement {disk|part}_to_dev() and use them to access generic device instead of directly dereferencing {disk|part}->dev. To make sure no user is left behind, rename generic devices fields to __dev. This is in preparation of unifying partition 0 handling with other partitions. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-05ide: workaround for bogus gcc warning in ide_sysfs_register_port()Bartlomiej Zolnierkiewicz
Reported-by: "Steven Noonan" <steven@uplinklabs.net> Suggested-by: "Elias Oltmanns" <eo@nebensachen.de> Cc: mingo@elte.hu Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24ide: use proper printk() KERN_* levels in ide-probe.cBartlomiej Zolnierkiewicz
While at it: - fixup printk() messages in save_match() and hwif_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24ide: fix for EATA SCSI HBA in ATA emulating modeBartlomiej Zolnierkiewicz
IDE probing code used to skip devices attached to EATA SCSI HBA in ATA emulating mode but because of warm-plug support port I/O resources are no longer freed if no devices are detected on a port and the decision about the driver to use is left up to the user. Remove no longer valid EATA SCSI HBA quirk from do_identify(). Noticed-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24ide: add ide_pci_remove() helperBartlomiej Zolnierkiewicz
* Add 'unsigned long host_flags' field to struct ide_host. * Set ->host_flags in ide_host_alloc_all(). * Always set PCI dev's ->driver_data in ide_pci_init_{one,two}(). * Add ide_pci_remove() helper (the default implementation for struct pci_driver's ->remove method). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24ide: add ide_device_{get,put}() helpersBartlomiej Zolnierkiewicz
* Add 'struct ide_host *host' field to ide_hwif_t and set it in ide_host_alloc_all(). * Add ide_device_{get,put}() helpers loosely based on SCSI's scsi_device_{get,put}() ones. * Convert IDE device drivers to use ide_device_{get,put}(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24ide: add ->dev and ->host_priv fields to struct ide_hostBartlomiej Zolnierkiewicz
* Add 'struct device *dev[2]' and 'void *host_priv' fields to struct ide_host. * Set ->dev[] in ide_host_alloc_all()/ide_setup_pci_device[s](). * Pass 'void *priv' argument to ide_setup_pci_device[s]() and use it to set ->host_priv. * Set PCI dev's ->driver_data to point to the struct ide_host instance if PCI host driver wants to use ->host_priv. * Rename ide_setup_pci_device[s]() to ide_pci_init_{one,two}(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: small whitespace fixesPavel Machek
Small whitespace fixes for drivers/ide. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_host_free() helper (take 2)Bartlomiej Zolnierkiewicz
* Add ide_host_free() helper and convert ide_host_remove() to use it. * Fix handling of ide_host_register() failure in ide_host_add(), icside.c, ide-generic.c, falconide.c and sgiioc4.c. While at it: * Fix handling of ide_host_alloc_all() failure in ide-generic.c. * Fix handling of ide_host_alloc() failure in falconide.c (also return the correct error value if no device is found). v2: * falconide build fix. (From Stephen Rothwell) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: allocate ide_hwif_t instances dynamicallyBartlomiej Zolnierkiewicz
* Allocate ide_hwif_t instances dynamically and remove ide_hwifs[]. This cuts almost ~14kB from ide-probe.o (x86-32, MAX_HWIFS == 10): text data bss dec hex filename 9140 40 14084 23264 5ae0 drivers/ide/ide-probe.o.before 9169 40 44 9253 2425 drivers/ide/ide-probe.o.after * Remove no longer needed ide_init_port_data() call from ide_unregister(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_ports[]Bartlomiej Zolnierkiewicz
* Add ide_ports[] table keeping pointers to all initialized ports. * Set ide_ports[] entry for a given port in init_irq() and clear it ide_remove_port_from_hwgroup(). * Convert init_irq() to use ide_ports[] instead of ide_hwifs[] for grouping ports into hwgroup. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: move ide_remove_port_from_hwgroup() to ide-probe.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: fix IDE port slots reservation and freeing (take 2)Bartlomiej Zolnierkiewicz
* Make ide_find_port_slot() return port slot index. * Add ide_free_port_slot() helper. * Move ide_init_port_data() call and error printk() from ide_find_port_slot() to ide_host_alloc_all(). * Make ide_{find,free}_port_slot() take ide_cfg_mtx mutex and convert them use ide_indexes bitmap to keep track of reserved port slots. * Don't set hwif->chipset in ide_host_alloc_all() as it is no longer necessary. v2: * Pass the correct slot index to ide_init_port_data(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: fix ide_host_register() return valueBartlomiej Zolnierkiewicz
Fix ide_host_register() to fail only if all ports cannot be registered. While at it: * Use host->ports[] instead of ide_hwifs[] and remove idx[]. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_host_add() helperBartlomiej Zolnierkiewicz
Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(), then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some host drivers to use it. While at it: * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c, macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value. * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c and pmac.c * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c * -1 -> -ENOMEM in ide-pnp.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_host (take 3)Bartlomiej Zolnierkiewicz
* Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add struct ide_tp_ops (take 2)Bartlomiej Zolnierkiewicz
* Add struct ide_tp_ops for transport methods. * Add 'const struct ide_tp_ops *tp_ops' to struct ide_port_info and ide_hwif_t. * Set the default hwif->tp_ops in ide_init_port_data(). * Set host driver specific hwif->tp_ops in ide_init_port(). * Export ide_exec_command(), ide_read_status(), ide_read_altstatus(), ide_read_sff_dma_status(), ide_set_irq(), ide_tf_{load,read}() and ata_{in,out}put_data(). * Convert host drivers and core code to use struct ide_tp_ops. * Remove no longer needed default_hwif_transport(). * Cleanup ide_hwif_t from methods that are now in struct ide_tp_ops. While at it: * Use struct ide_port_info in falconide.c and q40ide.c. * Rename ata_{in,out}put_data() to ide_{in,out}put_data(). v2: * Fix missing convertion in ns87415.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add 'config' field to hw_regs_tBartlomiej Zolnierkiewicz
Add 'config' field to hw_regs_t and use it to set hwif->config_data in ide_init_port_hw(), then convert ide_legacy_init_one() to use hw->config. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ide_read_device() helperBartlomiej Zolnierkiewicz
Add ide_read_device() helper and convert do_probe() to use it instead of ->INB. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: use ->tf_load in actual_try_to_identify()Bartlomiej Zolnierkiewicz
Convert actual_try_to_identify() to use ->tf_load instead of ->OUTB. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->set_irq methodBartlomiej Zolnierkiewicz
Add ->set_irq method for setting nIEN bit of ATA Device Control register and use it instead of ide_set_irq(). While at it: * Use ->set_irq in init_irq() and do_reset1(). * Don't use HWIF() macro in ide_check_pm_state(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->read_altstatus methodBartlomiej Zolnierkiewicz
* Remove ide_read_altstatus() inline helper. * Add ->read_altstatus method for reading ATA Alternate Status register and use it instead of ->INB. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->read_status methodBartlomiej Zolnierkiewicz
* Remove ide_read_status() inline helper. * Add ->read_status method for reading ATA Status register and use it instead of ->INB. While at it: * Don't use HWGROUP() macro. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->exec_command methodBartlomiej Zolnierkiewicz
Add ->exec_command method for writing ATA Command register and use it instead of ->OUTBSYNC. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: factor out simplex handling from ide_pci_dma_base()Bartlomiej Zolnierkiewicz
* Factor out simplex handling from ide_pci_dma_base() to ide_pci_check_simplex(). * Set hwif->dma_base early in ->init_dma method / ide_hwif_setup_dma() and reset it in ide_init_port() if DMA initialization fails. * Use ->read_sff_dma_status instead of ->INB in ide_pci_dma_base(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>