aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2007-10-16ide: unexport ide_tune_dmaAdrian Bunk
static code mustn't be exported. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove ->ide_dma_check (take 2)Bartlomiej Zolnierkiewicz
* Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide-pmac: add PIO autotune fallback to ->ide_dma_checkBartlomiej Zolnierkiewicz
Since ide-pmac allows separate PIO and DMA timings, and ide-pmac always sets ->autotune this change shouldn't have any other effect than bringing ide-pmac driver in-line with other host drivers wrt ->ide_dma_check implementation. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide-cris: add PIO autotune fallback to ->ide_dma_checkBartlomiej Zolnierkiewicz
Since ide-cris allows separate PIO and DMA timings, and ide-cris always sets ->autotune this change shouldn't have any other effect than bringing ide-cris driver in-line with other host drivers wrt ->ide_dma_check implementation. Cc: Mikael Starvik <starvik@axis.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16sl82c105: add PIO autotune fallback to ->ide_dma_checkBartlomiej Zolnierkiewicz
Since sl82c105 re-programs DMA/PIO timings for DMA enable/disable, and sets ->autotune this change shouldn't have any other effect than bringing sl82c105 driver in-line with other host drivers wrt ->ide_dma_check implementation. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16cs5530/sc1200: add PIO autotune fallback to ->ide_dma_checkBartlomiej Zolnierkiewicz
* Add PIO autotune fallback to ->ide_dma_check. Since cs5530/sc1200 allow separate PIO and DMA timings, and cs5530/sc1200 always set ->autotune this change shouldn't have any other effect than bringing these drivers in-line with other host drivers wrt ->ide_dma_check implementations. * Fix ->ide_dma_check to return "-1" if DMA cannot be set. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove ide_use_fast_pio()Bartlomiej Zolnierkiewicz
Remove ide_use_fast_pio() and just re-tune PIO unconditionally if DMA tuning has failed in ->ide_dma_check. All host drivers using ide_use_fast_pio() set drive->autotune so PIO is always tuned anyway and in some cases we _really_ need to re-tune PIO because PIO and DMA timings are shared. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: remove drive->init_speed zeroingBartlomiej Zolnierkiewicz
Several host drivers used to reset drive->init_speed in their ->ide_dma_check implementations which resulted in incorrect init speed being reported to the user, fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16au1xxx-ide: use ide_tune_dma()Bartlomiej Zolnierkiewicz
* Remove needless setting of drive->using_dma from auide_dma_check(). * Split off auide_mdma_filter() from auide_dma_check(). * Use ide_tune_dma() in auide_dma_check(), this fixes following issues: - device's DMA capability bit not being checked - device not being checked against generic DMA blacklist - transfer mode not being set on device/host * Add PIO autotune fallback to auide_dma_check(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16it8213/piix/slc90e66: remove {it8213,piix,slc90e66}_dma_2_pio()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16atiixp: DMA setup fixesBartlomiej Zolnierkiewicz
* Fix handling of unsupported/invalid modes in atiixp_set_dma_mode(). * ATI controllers allow separate PIO and DMA timings so remove programming of PIO modes from atiixp_set_dma_mode(). Also remove no longer needed atiixp_dma_2_pio() helper. * SWDMA timings are not programmed by atiixp_set_dma_mode() and if SWDMA mode is chosen atiixp_dma_host_on() erroneously enables UDMA, just disable support for SWDMA modes for now. * Enable support for MWDMA0 mode. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16sc1200: always tune PIOBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16cs5530: always tune PIOBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide-cris: always tune PIOBartlomiej Zolnierkiewicz
Acked-by: Mikael Starvik <starvik@axis.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16slc90e66: always tune PIOBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16aec62xx: always tune PIOBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16sis5513: always tune PIOBartlomiej Zolnierkiewicz
* Always set ->autotune in init_hwif_sis5513(), this means practically no change in behavior since PIO was always tuned in ->ide_dma_check and >autotune was always set for ->dma_base == 0 case. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16sis5513: DMA setup fixesBartlomiej Zolnierkiewicz
* Add sis_ata133_get_base() helper function for obtaining the address of the drive control registers on chipset_family == ATA_133 chipsets. * Add three helper functions for programming PIO/MWDMA timings: - sis_ata16_program_timings() (for ATA_16/33/66/100a chipset families) - sis_ata100_program_timings() (for ATA_100/133a chipset families) - sis_ata133_program_timings() (for ATA_133 chipset family) MWDMA timings are taken from datasheets and they match ATA spec. * Add generic helper function sis_program_timings() and use it in ->set_pio_mode and ->set_dma_mode methods (previously the driver depended on BIOS to program the correct MWDMA timings). * Remove redundant !chipset_family check from init_hwif_sis5513() (init_chipset_sis5513() guarantees that we will never get here if chipset_family cannot be determined). * SWDMA seems to be unsupported by SiS chipsets (no info about SWDMA in datasheets and for SWDMA0 mode timing requirements are impossible to fulfill) so remove ->swdma_mask from init_hwif_sis5513() and handling of SWDMA modes from sis_set_dma_mode(). * Enable DMA support for chipset_family == ATA_16. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16hpt366: always tune PIOBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide-cs: Add additional id string (corsair, 1GB)Kristoffer Ericson
This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16ide: fix serverworks.c UDMA regressionTony Battersby
The patch described by the following excerpt from ChangeLog-2.6.22 makes it impossible to use UDMA on a Tyan S2707 motherboard (SvrWks CSB5): commit 2d5eaa6dd744a641e75503232a01f52d0768884c Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Thu May 10 00:01:08 2007 +0200 ide: rework the code for selecting the best DMA transfer mode (v3) ... This one-line patch against 2.6.23 fixes the problem. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16IDE: sg chaining supportJens Axboe
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16remove ide_get_error_location()Adrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16block: convert blkdev_issue_flush() to use empty barriersJens Axboe
Then we can get rid of ->issue_flush_fn() and all the driver private implementations of that. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-13alim15x3: remove redundant m5229_revision checkBartlomiej Zolnierkiewicz
init_dma_ali15x3() guarantees that hwif->dma_base will never be set for m5229_revision < 0x20 so remove redundant m5229_revision >= 0x20 check from init_hwif_common_ali15x3(). While at it remove incorrect comment. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13sc1200: fix ->dma_base equal zero handlingBartlomiej Zolnierkiewicz
Set hwif->atapi_dma/{ultra,mwdma}_mask and drive->autodma after checking that ->dma_base exists. If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. OTOH hwif->set_{pio,dma}_mode hooks should be set even if hwif->dma_base == 0. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13cs5520: fix ->dma_base equal zero handlingBartlomiej Zolnierkiewicz
Set hwif->ide_dma_{check,on} and hwif->autodma to 1 after checking that ->dma_base exists. If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13sgiioc4: add missing ->dma_base checkBartlomiej Zolnierkiewicz
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13cs5535: add missing ->dma_base checkBartlomiej Zolnierkiewicz
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide: remove CONFIG_IDEDMA_IVB config optionBartlomiej Zolnierkiewicz
Devices which don't set word 93 validation bit should be now handled by ide-iops.c::ivb_list[] and for debugging purposes cable detection can be completely overriden with "idex=ata66" parameter. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide: change master/slave IDENTIFY orderBartlomiej Zolnierkiewicz
Need to probe slave device first to make it release PDIAG- (this is required for correct device side cable detection). Based on libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c. Thanks to Craig for testing this patch. Cc: Craig Block <chblock3@yahoo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide: move ide_config_drive_speed() calls to upper layers (take 2)Bartlomiej Zolnierkiewicz
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13pdc202xx_new: check ide_config_drive_speed() return valueBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13cs5535: check ide_config_drive_speed() return valueBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13amd74xx/via82cxxx: check ide_config_drive_speed() return valueBartlomiej Zolnierkiewicz
* Check ide_config_drive_speed() return value. * While at also call ide_config_drive_speed() if the transfer mode is XFER_PIO_SLOW (this case happens iff the transfer mode has already been set on the device by ide-proc.c::set_xfer_rate()) and remove redundant setting of ->{init,current}_speed. * Bump driver version. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13au1xxx: fix au1xxx_set_pio_mode()Bartlomiej Zolnierkiewicz
Set transfer mode on the device before programming the host controller for the new timings (matches what auide_tune_chipset() is doing wrt DMA modes). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13icside: use ide_tune_dma()Bartlomiej Zolnierkiewicz
* Add "good DMA drives" hack for icside to ide-dma.c::ide_find_dma_mode() (in the long-term it should be either removed or generalized for all hosts). * Use ide_tune_dma() in icside.c::icside_dma_check(). This results in the following changes in behavior: - pre-EIDE SWDMA modes are now also respected - drive->autodma is checked instead of hwif->autodma (doesn't really matter as icside sets both to "1") * Make ide-dma.c::__ide_dma_good_drive() static and drop "__" prefix. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: fix PIO setup and enable autotuneBenjamin Herrenschmidt
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: use ide_tune_dma() (take 2)Bartlomiej Zolnierkiewicz
* Add missing initialization of hwif->autodma and drive->autodma to pmac_ide_setup_dma(). * Use ide_tune_dma() in pmac_ide_dma_check(). While at it: * Fix pmac_ide_dma_check() return value if DMA mode is not programmed (should be "-1" otherwise ide_set_dma() will try to enable DMA). * Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if ->ide_dma_check returns "0"). v2: * No reason to blacklist all ide_floppy devices and the old code was always enabling DMA anyway (without even programming controller/device if the device was ide_floppy). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: remove pmac_ide_do_setfeature() (take 2)Bartlomiej Zolnierkiewicz
Use ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove the latter, also ide-iops.c::__ide_wait_stat() could be static again. Since for IDE PMAC host driver IDE_CONTROL_REG is always true, device's ->quirk_list is always zero and ->ide_dma_host_{on,off} are nops than the only changes in behavior are: * if PIO mode is set then ->dma_off_queitly is called to disable DMA * if setting transfer mode fails ide_dump_status() is called to dump status v2: * IDE PMAC controllers allow separate PIO and DMA timings and PPC userland depends on this fact, and calls "hdparm -p" without calling "hdparm -d". Therefore to compensate for DMA being disabled by ide_config_drive_speed() for PIO modes: - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver - add handling of the new flag to ide-io.c::do_special() Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()Bartlomiej Zolnierkiewicz
Upper layers are responsible for controlling nIEN so don't clear nIEN after command execution in pmac_ide_do_setfeature(). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: use __ide_wait_stat()Bartlomiej Zolnierkiewicz
* Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature(). While at it do following changes to match __ide_wait_stat() call in ide_config_drive_speed(): * Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT. * Check DRQ_STAT bit (shouldn't be set for good device status). Also remove no longer needed wait_for_ready() from ide-iops.c. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()Bartlomiej Zolnierkiewicz
Don't check for good device status before executing the command in pmac_ide_do_setfeature() (ide_config_drive_speed() doesn't do this). It is a job of upper layers to guarantee that the device is ready to accept new command before we get here. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide: add __ide_wait_stat() helperBartlomiej Zolnierkiewicz
* Split off checking of the status register from ide_wait_stat() to __ide_wait_stat() helper. * Use the new helper in ide_config_drive_speed(). The only change in the functionality is that the function now fails if after 20 sec (WAIT_CMD) device is still busy (BUSY_STAT bit is set) while previously instead of failing the function continued with checking for the correct device status (which would give the device additional 10 usec to clear BUSY_STAT bit). * Remove stale comment for ide_config_drive_speed(). * Remove duplicate comment for ide_wait_stat() from <linux/ide.h>. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: remove pmac_ide_{m,u}dma_enable() (take 2)Bartlomiej Zolnierkiewicz
* Fix pmac_ide_dma_check() to use pmac_ide_tune_chipset() and remove no longer necessary pmac_ide_{m,u}dma_enable(). * While at it remove some dead code from pmac_ide_dma_check() (leftovers from conversion to use ide_max_dma_mode()). There should be no functionality changes caused by this patch. v2: * Fix compile by replacing "id" with "drive->id" in pmac_ide_dma_check() (Noticed by Ben). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: remove control register messing from pmac_ide_dma_check()Bartlomiej Zolnierkiewicz
pmac_ide_do_setfeature() contains matching nIEN setting/clearing so this Device Control register messing in pmac_ide_dma_check() is totally unnecessary. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: fix set_timings_mdma()Bartlomiej Zolnierkiewicz
* Move adjusting of cycle time for devices providing explicit DMA cycle time from pmac_ide_mdma_enable() to set_timings_mdma(). * Remove no longer needed drive_cycle_time argument. * BUG() if unsupported speed argument value is passed (shouldn't happen). * Matching access/recovery timings always exist so remove redundant check. * Make set_timings_mdma() void. * Update pmac_ide_tune_chipset()'s comment. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: pmac_ide_tune_chipset() fixesBartlomiej Zolnierkiewicz
* Don't check check for pmif == NULL (it should never be NULL if we got here). * Make a local copy of the timings and set the pmif->timings[] only after setting the transfer mode on the device (otherwise SELECT_DRIVE() call in pmac_ide_do_setfeature() will program new timings before the transfer mode is set on the device - this was pointed out by Sergei). This change makes pmac_ide_tune_chipset() behavior match this of pmac_ide_{m,u}dma_enable(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide-pmac: don't check kauai_lookup_timing() return valueBartlomiej Zolnierkiewicz
kauai_lookup_timing() should always return non-zero return value: * BUG() in kauai_lookup_timing() if the timing info cannot be found. * Remove code checking for zero return value from all callers. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13ide: unexport ide_acpi_set_stateAdrian Bunk
This patch removes the unused EXPORT_SYMBOL_GPL(ide_acpi_set_state) Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 23:56:43 +0000