aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
AgeCommit message (Collapse)Author
2008-05-18m68k: macide doesnt check for MacGeert Uytterhoeven
The Macintosh IDE driver (macide) doesn't check whether it's actually running on Mac hardware, causing a crash if it isn't. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-14cs5520: disable VDMABartlomiej Zolnierkiewicz
Disable Virtual DMA support for now (it causes system hangs). Thanks to TAKADA Yoshihito for the help with debugging the problem. Reported-by: TAKADA Yoshihito <takada@mbf.nifty.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-14ide/Kconfig: couple of fixesBartlomiej Zolnierkiewicz
* Don't ask to enable no longer existing config options ("Use DMA by default when available" and "Special UDMA Feature"). * PIIX host driver doesn't support Victory66 chipset. * "ide0=cmd640_vlb" -> "cmd640.probe_vlb" * "ide=doubler" -> "gayle.doubler" * Amiga IDE doubler support is a feature for gayle host driver not a separate host driver. * Remove Andre's mail. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-14alim15x3: remove WDC_ALI15X3 config optionBartlomiej Zolnierkiewicz
There is "wdc_udma" module parameter now. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-14alim15x3: add "wdc_udma" module parameterBartlomiej Zolnierkiewicz
Add "wdc_udma" module parameter for allowing UDMA transfers on M1543C-E chipset for WDC disks. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-14alim15x3: remove stale warning about ATI RS100 northbridgeBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-14alim15x3: trivial cleanup for ali_set_pio_mode()Bartlomiej Zolnierkiewicz
Remove commented out code and stale comment. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-14make ide-iops.c:SELECT_MASK() staticAdrian Bunk
SELECT_MASK() can now become static. [bart: remove space between function name and open parenthesis] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-14SWARM IDE: Fix up following changes to ide_hwif_tMaciej W. Rozycki
Following recent changes to ide_hwif_t update the SWARM IDE driver to use hw_regs_t to initialize port mapping. Plus minor layout adjustments along the lines of other drivers. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-05m68k: Fix falconide `data_adr' typoGeert Uytterhoeven
commit 9567b349f7e7dd7e2483db99ee8e4a6fe0caca38 Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Mon Apr 28 23:44:36 2008 +0200 ide: merge ->atapi_*put_bytes and ->ata_*put_data methods introduced a typo (`data_adr' instead of `data_addr'), leading to a compile failure. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-04ide: IDE_HFLAG_SERIALIZE_DMA bugfixBartlomiej Zolnierkiewicz
Patch re-ordering could be harmful: commit 1fd1890594bd355a4217f5658a34763e77decee3 Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Sat Apr 26 22:25:24 2008 +0200 ide: add IDE_HFLAG_SERIALIZE_DMA host flag ... is buggy because ->init_dma method / ide_hwif_setup_dma() is called before IDE_HFLAG_SERIALIZE_DMA host flag is checked. Fix it by checking IDE_HFLAG_SERIALIZE[_DMA] after DMA initialization. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-05-01ide: fix early setup of hwif->host_flagsBartlomiej Zolnierkiewicz
On Thursday 01 May 2008, Jeremy Kerr wrote: > Hi all, > > On QS20 Cell machines, Linus' current git tree explodes on boot: > > SiI680: IDE controller (0x1095:0x0680 rev 0x02) at PCI slot > 0000:00:0a.0 > SiI680: BASE CLOCK == 133 > SiI680: 100% native mode on irq 51 > ide0: MMIO-DMA > ide1: MMIO-DMA > Unable to handle kernel paging request for data at address > 0xa000100081220080 > Faulting instruction address: 0xc000000000024748 > cpu 0x2: Vector: 300 (Data Access) at [c00000001e143420] > pc: c000000000024748: ._insw_ns+0x10/0x30 > lr: c000000000037fc4: .spiderpci_readsw+0x24/0x6c > sp: c00000001e1436a0 > msr: 9000000000001032 > dar: a000100081220080 > dsisr: 40000000 > current = 0xc00000003d060000 > paca = 0xc000000000623880 > pid = 1, comm = swapper > enter ? for help > [link register ] c000000000037fc4 .spiderpci_readsw+0x24/0x6c > [c00000001e1436a0] c00000000062ce63 (unreliable) > [c00000001e143730] c0000000000379d4 .iowa_readsw+0x78/0xa8 > [c00000001e1437c0] c000000000037a98 .iowa_insw+0x94/0xd4 > [c00000001e143850] c00000000022a190 .ata_input_data+0x298/0x2ec > [c00000001e143910] c00000000022b600 .try_to_identify+0x2c0/0x6d4 > [c00000001e1439d0] c00000000022bb54 .do_probe+0x140/0x35c > [c00000001e143a80] c00000000022bfbc .ide_probe_port+0x24c/0x670 > [c00000001e143b50] c00000000022d09c .ide_device_add_all+0x2ec/0x690 > [c00000001e143c00] c00000000022d4a4 .ide_device_add+0x64/0x74 > [c00000001e143c90] c00000000022f834 .ide_setup_pci_device+0x58/0x7c > [c00000001e143d30] c00000000038bdf8 > [c00000001e143e10] c000000000486fb0 .ide_scan_pcibus+0x8c/0x178 > [c00000001e143ea0] c000000000460c00 .kernel_init+0x1c4/0x344 > [c00000001e143f90] c000000000024a1c .kernel_thread+0x4c/0x68 > > It looks like we're trying to do PIO accesses (which appear to be > broken, but that's another issue) to this MMIO device. In > ata_input_data, we see that: > > u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; > > Gives mmio == 0. > > (what's the difference between hwif->mmio and ID_HFLAG_MMIO?) > > In the siimage driver, hwif->host flags is initially set up correctly > (host_flags includes IDE_HFLAG_MMIO), but we then *clear* this bit in > ide_init_port: > > hwif->host_flags = d->host_flags; > > where d is the struct ide_port_info for this chipset. In my case, > d->host_flags is 0x0. It looks like this will be the same for all of > the siimage chipsets. Don't over-write hwif->host_flags in ide_init_port(), some host drivers set IDE_HFLAG_MMIO or IDE_HFLAG_NO_IO_32BIT host flag early. Thanks to Jeremy Kerr for the excellent analysis of the bug. Reported-by: Jeremy Kerr <jk@ozlabs.org> Tested-by: Jeremy Kerr <jk@ozlabs.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-29alim15x3: disable init_hwif_ali15x3 for PowerPCAnton Vorontsov
We don't need init_hwif_ali15x3() on the PowerPC systems either. Before: ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 ALI15X3: 100% native mode on irq 19 ide0: BM-DMA at 0x1120-0x1127 ide1: BM-DMA at 0x1128-0x112f hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive hda: UDMA/66 mode selected ide0: Disabled unable to get IRQ 14. ide0: failed to initialize IDE interface ide1: Disabled unable to get IRQ 15. ide1: failed to initialize IDE interface After: ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at PCI slot 0001:03:1f.0 ALI15X3: 100% native mode on irq 19 ide0: BM-DMA at 0x1120-0x1127 ide1: BM-DMA at 0x1128-0x112f hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive hda: UDMA/66 mode selected ide0 at 0x1100-0x1107,0x110a on irq 19 ide1 at 0x1110-0x1117,0x111a on irq 19 hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ide0 works well, though I can't test ide1, it isn't traced out on the board. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-29ide: fix crash at boot with siimage driverBenjamin Herrenschmidt
Some change to the IDE layer are causing the siimage driver to crash at boot with a NULL dereference. This is due to the sil_dma_ops not containing all the necessary pointers. I suppose it used to just "override" the defaults while now, it needs to contain everything. [bart: while at it: sil_dma_ops should be const now (pointed out by Sergei)] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>, Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-29Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Skip I/O merges when disabled block: add large command support block: replace sizeof(rq->cmd) with BLK_MAX_CDB ide: use blk_rq_init() to initialize the request block: use blk_rq_init() to initialize the request block: rename and export rq_init() block: no need to initialize rq->cmd with blk_get_request block: no need to initialize rq->cmd in prepare_flush_fn hook block/blk-barrier.c:blk_ordered_cur_seq() mustn't be inline block/elevator.c:elv_rq_merge_ok() mustn't be inline block: make queue flags non-atomic block: add dma alignment and padding support to blk_rq_map_kern unexport blk_max_pfn ps3disk: Remove superfluous cast block: make rq_init() do a full memset() relay: fix splice problem
2008-04-29drivers: use non-racy method for proc entries creation (2)Denis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Neil Brown <neilb@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29block: replace sizeof(rq->cmd) with BLK_MAX_CDBFUJITA Tomonori
This is a preparation for changing rq->cmd from the static array to a pointer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29ide: use blk_rq_init() to initialize the requestFUJITA Tomonori
This converts ide to use blk_rq_init to initialize the request. This is a preparation for large command support, which needs to initialize the request in a proper way (that is, just doing a memset() will not work). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-28siimage: coding style cleanup (take 2)Sergei Shtylyov
Fix 18 errors and several warnings given by checkpatch.pl: - use of C99 // comments; - trailing whitespace; - 'switch' and 'case' not at the same indentation level; - no space before the open parenthesis of the 'if' and 'switch' statements; - space between function name and open parenthesis (though I have introduced such warnins in some places since the code looks prettier with the spaces); - including <asm/io.h> instead of <linux/io.h>; - line over 80 characters. In addition to these changes, also do the following: - make the arrays in sil_set_pio_mode() 'static', and make the arrays in sil_set_dma_mode() 'static const'; - change the string of the 'if' statements into the 'switch' statement in sil_pata_udma_filter(); - drop the needless '==' operators from the 'if' statements where a condition is a mere bit test; - remove needless initializer for the 'tmp' variable in init_chipset_siimage(); - beautify groups of the variable initializers and assignment operators; - add new line after variable definitions; - remove new line between the comment and the statements it refers to; - remove needless curly braces and parentheses; - fix typos, capitalize acronyms, etc. in the comments... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-cd: clean up cdrom_analyze_sense_data()Roel Kluin
[bart: fix handling of bio_sectors(failed_command->bio) == 0] Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-cd: fix test unsigned var < 0Roel Kluin
valid is unsigned and cannot be below 0. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]Alexander Smal
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28piix: add Asus Eee 701 controller to short cable listBartlomiej Zolnierkiewicz
Based on ata_piix patch by Dan McGee. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28remove the broken ETRAX_IDE driverAdrian Bunk
ETRAX_IDE was marked as broken last year with the comment "it doesn't even compile currently". Remove it since it won't get fixed in the near future. On Mon, Apr 14, 2008 at 02:50:19PM +0200, Mikael Starvik wrote: > You can remove it for now and we will resubmit a new if/when we get around > to fix it. [bart: ported it over IDE tree] Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: Jesper Nilsson <Jesper.Nilsson@axis.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->dma_prdtable field from ide_hwif_tBartlomiej Zolnierkiewicz
* Use 'hwif->dma_base + {4,8}' instead of hwif->dma_prdtable in {ide,scc}_dma_setup(). * Remove no longer needed ->dma_prdtable field from ide_hwif_t. While at it: * Use ATA_DMA_TABLE_OFS define. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->dma_vendor{1,3} fields from ide_hwif_tBartlomiej Zolnierkiewicz
* Use 'hwif->dma_base + {1,3}' instead of hwif->dma_vendor{1,3} in pdc202xx_new host driver. * Remove no longer needed ->dma_vendor{1,3} fields from ide_hwif_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28scc_pata: add ->dma_host_set and ->dma_start methodsBartlomiej Zolnierkiewicz
Add ->dma_host_set and ->dma_start methods (+ __scc_dma_end() helper) so scc_ide_{in,out}b() can be used directly. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: skip "VLB sync" if host uses MMIOBartlomiej Zolnierkiewicz
* Skip "VLB sync" in ata_{in,out}put_data() if host uses MMIO. * Use I/O ops directly in ata_vlb_sync() an drop no longer needed 'ide_drive_t *drive' argument. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ide_pad_transfer() helperBartlomiej Zolnierkiewicz
* Add ide_pad_transfer() helper (which uses ->{in,out}put_data methods internally so the transfer is also padded to drive+host requirements) and use it instead of ide_atapi_{write_zeros,discard_data}(). * Remove no longer needed ide_atapi_{write_zeros,discard_data}(). Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->INW and ->OUTW methodsBartlomiej Zolnierkiewicz
* Remove no longer used ->INW and ->OUTW methods. While at it: * scc_pata.c: scc_ide_{out,in}w() is called only in scc_tf_{load,read}() so inline it there. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: use IDE I/O helpers directly in ide_tf_{load,read}()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ns87415: add ->tf_read methodBartlomiej Zolnierkiewicz
Add ->tf_read method so out{b,w}(), in{b,w}() and superio_ide_inb() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28scc_pata: add ->tf_{load,read} methodsBartlomiej Zolnierkiewicz
Add ->tf_{load,read} methods so scc_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-h8300: add ->tf_{load,read} methodsBartlomiej Zolnierkiewicz
Add ->tf_{load,read} methods so outb()/inb() and mm_outw()/mm_inw() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-cris: add ->tf_{load,read} methodsBartlomiej Zolnierkiewicz
Add ->tf_{load,read} methods so cris_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ->tf_load and ->tf_read methodsBartlomiej Zolnierkiewicz
* Add ->tf_load and ->tf_read methods to ide_hwif_t and set the default methods in default_hwif_transport(). * Use ->tf_{load,read} instead o calling ide_tf_{load,read}() directly. * Make ide_tf_{load,read}() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: move ide_tf_{load,read} to ide-iops.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: factor out debugging code from ide_tf_load()Bartlomiej Zolnierkiewicz
Factor out debugging code from ide_tf_load() to ide_tf_dump() helper and update ide_tf_load() users accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ide_execute_pkt_cmd() helperBartlomiej Zolnierkiewicz
Add ide_execute_pkt_cmd() helper for executing PACKET command, then convert ATAPI device drivers to use it. As a nice side-effect this fixes ide-{floppy,tape,scsi} w.r.t. ide_lock taking (ide-cd was OK). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-{floppy,tape,scsi}: 400ns delay is required after executing the commandBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: always use ->OUTBSYNC method for executing commandsBartlomiej Zolnierkiewicz
Always use ->OUTBSYNC method for executing commands so the posting is done if needed (this affects only pmac and scc_pata host drivers at the moment). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28siimage: remove proc_reports_siimage()Bartlomiej Zolnierkiewicz
* proc_reports_siimage() is now only called by init_chipset_siimage() so inline it there. * Use array instead of switch statement for reporting clock modes. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28siimage: add sil_* I/O opsBartlomiej Zolnierkiewicz
Add sil_iowrite{8,16,32}() and sil_ioread{8,16}() helpers, then use them to merge code accessing configuration registers through PCI and MMIO together. [ because of this SATA initialization bits from setup_mmio_siimage() are moved to init_chipset_siimage() ] This also cuts code size a bit: text data bss dec hex filename 4437 164 0 4601 11f9 drivers/ide/pci/siimage.o.before 3979 164 0 4143 102f drivers/ide/pci/siimage.o.after While at it: * Use I/O ops directly instead of using ->IN{B,W} and ->OUT{B,W}. * Fixup CodingStyle in setup_mmio_siimage(). * Rename 'tmpbyte' variable to 'tmp' in init_chipset_siimage(). There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28siimage: do clocking register posting earlier in setup_mmio_siimage()Bartlomiej Zolnierkiewicz
Do clocking register posting earlier in setup_mmio_siimage() to match code in init_chipset_siimage(). This is a preparation for the next patch which merges PCI and MMIO code paths together. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->INS{W,L} and ->OUTS{W,L} methodsBartlomiej Zolnierkiewicz
* Use ins{w,l}()/outs{w,l}() and __ide_mm_ins{w,l}()/__ide_mm_outs{w,l}() directly in ata_{in,out}put_data() (by using IDE_HFLAG_MMIO host flag to decide which I/O ops are required). * Remove no longer needed ->INS{W,L} and ->OUTS{W,L} methods (ide-h8300, au1xxx-ide and scc_pata implement their own ->{in,out}put_data methods). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add IDE_HFLAG_MMIO host flag (take 2)Bartlomiej Zolnierkiewicz
* Add IDE_HFLAG_MMIO host flag and set it for hosts which use default_hwif_mmiops(). v2: * Fix kernel panic in pmac host driver (',' should be '|'). Thanks to Kamalesh for reporting it + testing the fix and to Andrew for hinting me about the source of the issue. Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-h8300: add ->{in,out}put_data methods (take 2)Bartlomiej Zolnierkiewicz
v2: * Update ->{in,out}_data methods to take 'struct request *rq' argument. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28au1xxx-ide: add ->{in,out}put_data methods (take 2)Bartlomiej Zolnierkiewicz
v2: * Update ->{in,out}_data methods to take 'struct request *rq' argument. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28scc_pata: add ->{in,out}put_data methods (take 2)Bartlomiej Zolnierkiewicz
v2: * Update ->{in,out}_data methods to take 'struct request *rq' argument (thanks to Stephen Rothwell for catching it). There should be no functional changes caused by this patch. Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: merge ->atapi_*put_bytes and ->ata_*put_data methodsBartlomiej Zolnierkiewicz
* Merge ->atapi_{in,out}put_bytes and ->ata_{in,out}put_data methods into new ->{in,out}put_data methods which take number of bytes to transfer as an argument and always do padding. While at it: * Use 'hwif' or 'drive->hwif' instead of 'HWIF(drive)'. There should be no functional changes caused by this patch (all users of ->ata_{in,out}put_data methods were using multiply-of-4 word counts). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 19:44:07 +0000