aboutsummaryrefslogtreecommitdiff
path: root/drivers/ieee1394/sbp2.c
AgeCommit message (Collapse)Author
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-12ieee1394: add preprocessor constant for invalid csr addressBen Collins
Replace occurrences of the magic value ~(u64)0 for invalid CSR address spaces by a named constant for better readability. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: fix deregistration of status fifo address spaceBen Collins
The proper designator of an invalid CSR address is ~(u64)0, not (u64)0. Use the correct value in initialization and deregistration. Also, scsi_id->sbp2_lun does not need to be initialized twice. (scsi_id was kzalloc'd.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: fix S800 transfers if phys_dma is offBen Collins
If sbp2 is forced to move data via ARM handler, the maximum packet size allowed for S800 transfers exceeds ohci1394's buffer size on platforms where PAGE_SIZE is 4096. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: remove ohci1394 specific constantBen Collins
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: log number of supported concurrent loginsBen Collins
Since this is useful information, promote it from a debug macro to a regular log message. The message appears only if the user set exclusive_login=0, therefore won't clutter the logs in normal use. Also update the comment on exclusive_login. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: remove manipulation of inquiry responseBen Collins
This code became ineffective a few Linux releases ago and is not required anyway. Note from Christoph Hellwig: scsi_cmnd.request_buffer is always a scatterlist these days. Checking random bites into it and then mangling the data in sbp2_check_sbp2_response will cause really bad memory corruption when you're not lucky enough to have the check not trigger by luck. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12ieee1394: support for slow links or slow 1394b phy portsBen Collins
Add support for the following types of hardware: + nodes that have a link speed < PHY speed + 1394b PHYs that are less than S800 capable + 1394b/1394a adapter cable between two 1394b PHYs Also, S1600 and S3200 are now supported if IEEE1394_SPEED_MAX is raised. A probing function is added to nodemgr's config ROM fetching routine which adjusts the allowable speed if an access problem was encountered. Pros and Cons of the approach: + minimum code footprint to support this less widely used hardware + nearly no overhead for unaffected hardware - ineffective before nodemgr began to read the ROM of affected nodes - ineffective if ieee1394 is loaded with disable_nodemgr=1 The speed map CSRs which are published to the bus are not touched by the patch. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Hakan Ardo <hakan@debian.org> Cc: Calculex <linux@calculex.com> Cc: Robert J. Kosinski <robk@cmcherald.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12sbp2: make TSB42AA9 workaround specific to Momobay CX-1Ben Collins
The workarounds are not required for DViCO Momobay FX-3A and AFAIR not for Momobay CX-2. These contain an TSB42AA9A but feature the same firmware_revision value as the older DViCO Momobay CX-1. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-05[PATCH] sbp2: fix check of return value of ↵Stefan Richter
hpsb_allocate_and_register_addrspace() From: Stefan Richter <stefanr@s5r6.in-berlin.de> I added a failure check in patch "sbp2: variable status FIFO address (fix login timeout)" --- alas for a wrong error value. This is a bug since Linux 2.6.16. Leads to NULL pointer dereference if the call failed, and bogus failure handling if call succeeded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> Cc: Ben Collins <bcollins@debian.org> Cc: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17[PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devicesStefan Richter
Re-enable posted writes for status FIFO. Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x and older, this also fixes an interoperability regression since 2.6.16: http://bugzilla.kernel.org/show_bug.cgi?id=6356 (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Vanei Heidemann <linux@javanei.com.br> Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17[PATCH] sbp2: add ability to override hardwired blacklistStefan Richter
In case the blacklist with workarounds for device bugs yields a false positive, the module load parameter can now also be used as an override instead of an addition to the blacklist. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17[PATCH] sbp2: add read_capacity workaround for iPodStefan Richter
Apple decided to copy some USB stupidity over to FireWire. The sector number returned by iPods from read_capacity is one too many. This may cause I/O errors, especially if the kernel is configured for EFI partition support. We use the same workaround as usb-storage but have to check for different model IDs. http://marc.theaimsgroup.com/?t=114233262300001 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409 Acknowledgements: Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>, additional data about affected and unaffected Apple hardware from Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17[PATCH] sbp2: consolidate workaroundsStefan Richter
Grand unification of the three types of workarounds we have so far. The "skip mode page 8" workaround is now limited to devices which pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no longer enabled for Initio bridges. Patch update in anticipation of more workarounds: - Add module parameter "workarounds". - Deprecate parameter "force_inquiry_hack". - Compose the blacklist of a compound type for better readability and extensibility. - Remove a now unused #define. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02[PATCH] sbp2: fix spinlock recursionStefan Richter
sbp2util_mark_command_completed takes a lock which was already taken by sbp2scsi_complete_all_commands. This is a regression in Linux 2.6.15. Reported by Kristian Harms at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187394 [ More complete commentary, as response to questions by Andrew: ] > This changes the call environment for all implementations of > ->Current_done(). Are they all safe to call under this lock? Short answer: Yes, trust me. ;-) Long answer: The done() callbacks are passed on to sbp2 from the SCSI stack along with each SCSI command via the queuecommand hook. The done() callback is safe to call in atomic context. So does Documentation/scsi/scsi_mid_low_api.txt say, and many if not all SCSI low-level handlers rely on this fact. So whatever this callback does, it is "self-contained" and it won't conflict with sbp2's internal ORB list handling. In particular, it won't race with the sbp2_command_orb_lock. Moreover, sbp2 already calls the done() handler with sbp2_command_orb_lock taken in sbp2scsi_complete_all_commands(). I admit this is ultimately no proof of correctness, especially since this portion of code introduced the spinlock recursion in the first place and we didn't realize it since this code's submission before 2.6.15 until now. (I have learned a lesson from this.) I stress-tested my patch on x86 uniprocessor with a preemptible SMP kernel (alas I have no SMP machine yet) and made sure that all code paths which involve the sbp2_command_orb_lock were gone through multiple times. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28sbp2: misc debug logging cleanupsStefan Richter
- move call of scsi_print_command from sbp2_send_command to the beginning of sbp2_queue_command to show also commands which are not sent - put sbp2's name into scsi_print_sense - use __FUNCTION__ in log messages - remove a few less useful log messages and comments Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28sbp2: proper treatment of DID_OKStefan Richter
Sbp2 relied on DID_OK to be defined as 0. Always shift DID_OK into the right position anyway, and explicitly return DID_OK together with CHECK_CONDITION. Also comment on some #if 0 code. The patch does not change current behaviour. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28sbp2: check for ARM failureStefan Richter
Sbp2 did not check for successful registration of the lower address range when CONFIG_IEEE1394_SBP2_PHYS_DMA was set. If hpsb_register_addrspace failed, a "login timed-out" would occur which is misleading. Now sbp2 logs a sensible error message. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28sbp2: prevent unloading of 1394 low-level driverStefan Richter
When a new SBP-2 unit is added, sbp2 now takes a reference on the 1394 low-level driver (ohci1394 or pcilynx). This prevents the 1394 host driver module from being unloaded, e.g. by an administrative routine cleanup of unused kernel modules or when another 1394 driver which depends on ohci1394 is unloaded. The reference is dropped when the SBP-2 unit was disconnected, when sbp2 is unloaded or detached from the unit, or when addition of the SBP-2 unit failed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-02-23sbp2: update 36byte inquiry workaround (fix compatibility regression)Stefan Richter
Since about Linux 2.6.14, sbp2's inquiry workaround did not work anymore due to changes in the SCSI layer. Update it to become effective again. Testing one of the two known affected bridges has shown that skip_ms_page_8 is required as well. Also, make force_inquiry_hack tunable via /sys/module/sbp2/parameters. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com> (cherry picked from 99496037c6744fd938ffb8ccfc8fc91762322ff8 commit)
2006-02-23sbp2: variable status FIFO address (fix login timeout)Stefan Richter
Let the ieee1394 core select a suitable 1394 address range for sbp2's status FIFO instead of using a fixed range. Since the core only selects addresses which are guaranteed to be out of the "physical range" as per OHCI 1.1, this patch also fixes an old bug: OHCI controllers which implement a writeable PhysicalUpperBound register included sbp2's status FIFO in the physical range. That way sbp2 was never notified of a succesful login and always failed after timeout. Affected OHCI host adapters include ALi and Fujitsu controllers. As another side effect of this patch, the status FIFO is no longer located in a range for which OHCI chips perform "posted writes". Each status write now requires a response subaction. But since large data transfers involve only few status writes, there is no measurable decrease of I/O throughput. What's more, the status FIFO is now safe from potential host bus errors. Nevertheless, posted writes could be re-enabled by extensions to the ARM features of the 1394 stack. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com> (cherry picked from b2d38cccad4ef80d6b672b8f89aae5fe2907b113 commit)
2006-02-23sbp2: fix another deadlock after disconnectionStefan Richter
If there were commands enqueued but not completed before an SBP-2 unit was unplugged (or an attempt to reconnect failed), knodemgrd or any process which tried to remove the device would sleep uninterruptibly in blk_execute_rq(). Therefore make sure that all commands are completed when sbp2 retreats. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com> (cherry picked from 61daa34c132c5d4ed8630e2c46e9bf2f0c7b3428 commit)
2006-02-18[PATCH] don't mangle INQUIRY if cmddt or evpd bits are setAl Viro
sbp2.c mangles INQUIRY response in a way that only applies to standard inquiry data (i.e. when both cmddt and evpd bits are 0). Leave other cases alone; e.g. when asking for VPD the length of reply is in byte 3, not 4 and byte 4 is the first byte of device serial number. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2005-12-13sbp2: remove duplicate code from sbp2_start_device()Stefan Richter
Use sbp2_remove_device() to free FIFO and ORB DMAs in a failure case. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-13sbp2: split sbp2_create_command_orb() for better readabilityStefan Richter
sbp2_create_command_orb() code cleanup: - add two helper functions to reduce nesting depth - omit the return value which was always ignored - remove unnecessary declaration from sb2.h Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-12sbp2: did not clean up after scsi_add_device() failedStefan Richter
If scsi_add_device() at the end of sbp2_start_device() fails, e.g. due to transport errors during SCSI inquiry, sbp2 needs to log out of the device and release all associated resources. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-12sbp2: delete sbp2scsi_direction_tableStefan Richter
DMA_BIDIRECTIONAL data direction may be handled properly by Linux in the future. For now, reject it instead to convert it to another direction. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-19sbp2: slimmer interface to scsi_modStefan Richter
- sbp2scsi_reset does not need to take host_lock - sbp2scsi_reset, as our device reset handler, does not need to stand in as bus reset or host reset handler - let scsi_mod use scsi_host_template.name instead of .info (sbp2 is not an emulation anway) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07kmalloc/kzalloc changes:Stefan Richter
dv1394, eth1394, ieee1394, ohci1394, pcilynx, raw1394, sbp2c, video1394: - use kzalloc - provide safer size arguments to kmalloc and kzalloc - omit some casts Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07Remove version strings from eth1394, ohci1394, sbp2.Stefan Richter
Their version information is not trustworthy. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07sbp2, ohci1394 cleanups:Stefan Richter
sbp2: various code formatting cleanups ohci1394: remove form feed characters Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07sbp2: Remove our tracking of device type,Ben Collins
since we no longer need to worry about it. Depends on patch "ieee1394: remove sbp2's TYPE_RBC and 10byte handling". Signed-off-by: Ben Collins <bcollins@debian.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07sbp2: Merge TYPE_RBC and 10byte removal patch from scsi maintainers.Ben Collins
Added more cleanups to remove unused code. Signed-off-by: Ben Collins <bcollins@debian.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07sbp2_command_orb_lock must be held when accessing the _orb_inuse list.Jody McIntyre
Fixes an oops in sbp2util_find_command_for_SCpnt after sbp2scsi_abort: https://bugzilla.novell.com/show_bug.cgi?id=113734 Signed-off-by: Jody McIntyre <scjody@steamballoon.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2005-09-30[PATCH] sbp2: default to serialize_io=1Jody McIntyre
Set serialize_io=1 by default. This is safer and required by seemingly more and more hardware. It causes little or no performance loss for S400 devices. Performance of S800 1394b devices may drop by 25...30%. Therefore make the parameter's description and dmesg message clearer about performance impact. Update description of the max_speed parameter too. IEEE1394_SPEED_MAX is currently S800. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@steamballoon.com> Cc: Ben Collins <bcollins@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30[PATCH] sbp2: fix deadlocks and delays on device removal/rmmodJody McIntyre
Fixes for deadlocks of the ieee1394 and scsi subsystems and long delays in futile error recovery attempts when SBP-2 devices are removed or drivers are unloaded. - Complete commands quickly with DID_NO_CONNECT if the 1394 node is gone or if the 1394 low-level driver was unloaded. - Skip unnecessary work in the eh_abort_handler and eh_device_reset_handler if the node or 1394 low-level driver is gone. - Let scsi's high-level shut down gracefully when sbp2 is being unloaded or detached from the 1394 unit. A call to scsi_remove_device is added for this purpose, which requires us to store a scsi_device pointer. - scsi_device pointer is obtained from slave_alloc hook and cleared by slave_destroy. This avoids usage of the pointer after the scsi device was deleted e.g. by the user via scsi_mod's sysfs interface. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@steamballoon.com> Cc: Ben Collins <bcollins@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[SCSI] Alter the scsi_add_device() API to conform to what users expectJames Bottomley
The original API returned either an ERR_PTR() or a refcounted sdev. Unfortunately, if it's successful, you need to do a scsi_device_put() on the sdev otherwise the refcounting is wrong. Everyone seems to expect that scsi_add_device() should be callable without doing the ref put, so alter the API so it is (we still have __scsi_add_device with the original behaviour). The only actual caller that needs altering is the one in firewire ... not because it gets this right, but because it acts on the error if one is returned. Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-27[PATCH] turn many #if $undefined_string into #ifdef $undefined_stringOlaf Hering
turn many #if $undefined_string into #ifdef $undefined_string to fix some warnings after -Wno-def was added to global CFLAGS Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-10[PATCH] Sync up ieee-1394Ben Collins
Lots of this patch is trivial code cleanups (static vars were being intialized to 0, etc). There's also some fixes for ISO transmits (max buffer handling). Aswell, we have a few fixes to disable IRM capabilites correctly. We've also disabled, by default some generally unused EXPORT symbols for the sake of cleanliness in the kernel. However, instead of removing them completely, we felt it necessary to have a config option that allowed them to be enabled for the many projects outside of the main kernel tree that use our API for driver development. The primary reason for this patch is to revert a MODE6->MODE10 RBC conversion patch from the SCSI maintainers. The new conversions handled directly in the scsi layer do not seem to work for SBP2. This patch reverts to our old working code so that users can enjoy using Firewire disks and dvd drives again. We are working with the SCSI maintainers to resolve this issue outside of the main kernel tree. We'll merge the patch once the SCSI layer's handling of the MODE10 conversion is working for us. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-20[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - ↵Yani Ioannou
drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-17merge by hand (fix up qla_os.c merge error)James Bottomley
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] Remove unnecessary locking around completion function callsJeff Garzik
The SCSI ->done() hook should not be called from inside a spinlock. Drivers that do this are mostly cut-n-paste from 2.2.x-era. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-16[PATCH] sbp2 slab corruption fixAlexandre Oliva
This fixed a problem that showed up in the Fedora development tree a few weeks before the Fedora Core 4 release, initially as slab corruption, later as hard crashes on boot up, when slab debugging was disabled for the release. More details on the history at https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158424 The problem is caused by sbp2's use of scsi_host->hostdata[0] to hold a scsi_id, without explicitly requesting space for it. Since hostdata is declared as a zero-sized array, we don't get any such space by default, so it must be explicitly requested. The patch below implements just that. Signed-off-by: Alexandre Oliva <aoliva@redhat.com> Cc: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-26[SCSI] git-scsi-misc-sbp2-warning-fixAndrew Morton
drivers/ieee1394/sbp2.c: In function `sbp2_check_sbp2_response': drivers/ieee1394/sbp2.c:2154: warning: unused variable `device_type' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-26[SCSI] TYPE_RBC cache fixes (sbp2.c affected)Al Viro
a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off c) relevant places in midlayer and sd.c taught to accept TYPE_RBC d) sd.c::sd_read_cache_type() looks into page 6 when dealing with TYPE_RBC - these guys have writeback cache flag there and are not guaranteed to have page 8 at all. e) sd_read_cache_type() got an extra sanity check - it checks that it got the page it asked for before using its contents. And screams if mismatch had happened. Rationale: there are broken devices out there that are "helpful" enough to go for "I don't have a page you've asked for, here, have another one". For example, PL3507 had been caught doing just that... f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions in there are gone now. Incidentally, I wonder if USB storage devices that have no mode page 8 are simply RBC ones. I haven't touched that, but it might be interesting to check... Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!