aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/core
AgeCommit message (Collapse)Author
2009-04-08RDMA/cma: Create cm id even when IB port is downYossi Etigin
When doing rdma_resolve_addr(), if the relevant IB port is down, the function fails and the cm_id is not bound to the correct device. Therefore, application does not have a device handle and cannot wait for the port to become active. The function fails because the underlying IPoIB interface is not joined to the broadcast group and therefore the SA does not have a multicast record to take a Q_Key from. The fix is to use lazy Q_Key resolution - cma_set_qkey() will set id_priv->qkey if it was not set, and will be called just before the Q_Key is really required. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-04-01RDMA/cma: Use rate from IPoIB broadcast when joining IPoIB multicast groupsYossi Etigin
When joining an IPoIB multicast group, use the same rate as in the broadcast group. Otherwise, if the RDMA CM creates this group before IPoIB does, it might get a different rate. This will cause IPoIB to fail joining to the same group later on, because IPoIB uses strict rate selection. Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-24Merge branches 'cxgb3', 'endian', 'ipath', 'ipoib', 'iser', 'mad', 'misc', ↵Roland Dreier
'mlx4', 'mthca', 'nes' and 'sysfs' into for-next
2009-03-04IB: Remove useless ibdev_is_alive() tests from sysfs codeRoland Dreier
Some attribute show functions test ibdev_is_alive() to make sure that it's OK to access device state. However, the sysfs attributes will not be registered until the device is fully initialized, and they'll be unregistered before anything is torn down, so ibdev_is_alive() doesn't do anything useful. Remove it. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03IB/sa_query: Fix AH leak due to update_sm_ah() raceJack Morgenstein
Our testing uncovered a race condition in ib_sa_event(): spin_lock_irqsave(&port->ah_lock, flags); if (port->sm_ah) kref_put(&port->sm_ah->ref, free_sm_ah); port->sm_ah = NULL; spin_unlock_irqrestore(&port->ah_lock, flags); schedule_work(&sa_dev->port[event->element.port_num - sa_dev->start_port].update_task); If two events occur back-to-back (e.g., client-reregister and LID change), both may pass the spinlock-protected code above before the scheduled work updates the port->sm_ah handle. Then if the scheduled work ends up running twice, the second operation will then find a non-NULL port->sm_ah, and will simply overwrite it in update_sm_ah -- resulting in an AH leak. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03IB/mad: Fix ib_post_send_mad() returning 0 with no generate send compRalph Campbell
If ib_post_send_mad() returns 0, the API guarantees that there will be a callback to send_buf->mad_agent->send_handler() so that the sender can call ib_free_send_mad(). Otherwise, the ib_mad_send_buf will be leaked and the mad_agent reference count will never go to zero and the IB device module cannot be unloaded. The above can happen without this patch if process_mad() returns (IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED). If process_mad() returns IB_MAD_RESULT_SUCCESS and there is no agent registered to receive the mad being sent, handle_outgoing_dr_smp() returns zero which causes a MAD packet which is at the end of the directed route to be incorrectly sent on the wire but doesn't cause a hang since the HCA generates a send completion. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27IB/mad: initialize mad_agent_priv before putting on listsRalph Campbell
There is a potential race in ib_register_mad_agent() where the struct ib_mad_agent_private is not fully initialized before it is added to the list of agents per IB port. This means the ib_mad_agent_private could be seen before the refcount, spin locks, and linked lists are initialized. The fix is to initialize the structure earlier. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-02-27IB/mad: Fix null pointer dereference in local_completions()Ralph Campbell
handle_outgoing_dr_smp() can queue a struct ib_mad_local_private *local on the mad_agent_priv->local_work work queue with local->mad_priv == NULL if device->process_mad() returns IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_REPLY and (!ib_response_mad(&mad_priv->mad.mad) || !mad_agent_priv->agent.recv_handler). In this case, local_completions() will be called with local->mad_priv == NULL. The code does check for this case and skips calling recv_mad_agent->agent.recv_handler() but recv == 0 so kmem_cache_free() is called with a NULL pointer. Also, since recv isn't reinitialized each time through the loop, it can cause a memory leak if recv should have been zero. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
2009-02-25IB: Remove sysfs files before unregistering deviceRoland Dreier
Move the ib_device_unregister_sysfs() call from ib_dealloc_device() to ib_unregister_device(). The old code allows device unregister to proceed even if some sysfs files are open, which leaves a window where userspace can open a file before a device is removed but then end up reading the file after the device is removed, which leads to various kernel crashes either because the device data structure is freed or because the low-level driver code is gone after module removal. By not returning from ib_unregister_device() until after all sysfs entries are removed, we make sure that data structures and/or module code is not freed until after all sysfs access is done. Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-17IB: Remove __constant_{endian} usesHarvey Harrison
The base versions handle constant folding just fine, use them directly. The replacements are OK in the include/ files as they are not exported to userspace so we don't need the __ prefixed versions. This patch does not affect code generation at all. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-06infiniband: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-29RDMA/addr: Fix build breakage when IPv6 is disabledRoland Dreier
Commit 38617c64 ("RDMA/addr: Add support for translating IPv6 addresses") broke the build when CONFIG_IPV6=n, because the ib_addr module unconditionally attempted to call ipv6_chk_addr() and other IPv6 functions that are not defined when IPv6 is disabled. Fix this by only building IPv6 support if CONFIG_IPV6 is turned on, and add a Kconfig dependency to prevent the ib_addr code from being built in when IPv6 is built modular. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-24RDMA/cma: Add IPv6 supportAleksey Senin
Handle AF_INET6 cases where required, and use struct sockaddr_storage wherever an IPv6 address might be stored. Signed-off-by: Aleksey Senin <aleksey@alst60.(none)> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-24RDMA/addr: Add support for translating IPv6 addressesAleksey Senin
Add support for translating AF_INET6 addresses to the IB address translation service. This requires using struct sockaddr_storage instead of struct sockaddr wherever an IPv6 address might be stored, and adding cases to handle IPv6 in addition to IPv4 to the various translation functions. Signed-off-by: Aleksey Senin <aleksey@alst60.(none)> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-01saner FASYNC handling on file closeAl Viro
As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-29net: replace %p6 with %pI6Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28infiniband: use %p6 for printing message idsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Reject dynamic memory add/remove when ehca adapter is present IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter IPoIB: Set netdev offload features properly for child (VLAN) interfaces IPoIB: Clean up ethtool support mlx4_core: Add Ethernet PCI device IDs mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC mlx4_core: Multiple port type support mlx4_core: Ethernet MAC/VLAN management mlx4_core: Get ethernet MTU and default address from firmware mlx4_core: Support multiple pre-reserved QP regions Update NetEffect maintainer emails to Intel emails RDMA/cxgb3: Remove cmid reference on tid allocation failures IB/mad: Use krealloc() to resize snoop table IPoIB: Always initialize poll_timer to avoid crash on unload IB/ehca: Don't allow creating UC QP with SRQ mlx4_core: Add QP range reservation support RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
2008-10-22Merge branches 'cma', 'cxgb3', 'ehca', 'ipoib', 'mad', 'mlx4' and 'nes' into ↵Roland Dreier
for-next
2008-10-20x86: sysfs: kill owner field from attributeParag Warudkar
Tejun's commit 7b595756ec1f49e0049a9e01a1298d53a7faaa15 made sysfs attribute->owner unnecessary. But the field was left in the structure to ease the merge. It's been over a year since that change and it is now time to start killing attribute->owner along with its users - one arch at a time! This patch is attempt #1 to get rid of attribute->owner only for CONFIG_X86_64 or CONFIG_X86_32 . We will deal with other arches later on as and when possible - avr32 will be the next since that is something I can test. Compile (make allyesconfig / make allmodconfig / custom config) and boot tested. akpm: the idea is that we put the declaration of sttribute.owner inside `#ifndef CONFIG_X86'. But that proved to be too ambitious for now because new usages kept on turning up in subsystem trees. [akpm: remove the ifdef for now] Signed-off-by: Parag Warudkar <parag.lkml@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <htejun@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16device create: infiniband: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-14IB/mad: Use krealloc() to resize snoop tableRoland Dreier
Use krealloc() instead of kmalloc() followed by memcpy() when resizing the MAD module's snoop table. Also put parentheses around the new table size to avoid calculating the wrong size to allocate, which fixes a bug pointed out by Haven Hash <haven.hash@isilon.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-10RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()Julien Brunel
In case of error, the function ucma_alloc_multicast() returns a NULL pointer, but never returns an ERR pointer. So after a call to this function, an IS_ERR test should be replaced by a NULL test. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match bad_is_err_test@ expression x, E; @@ x = ucma_alloc_multicast(...) ... when != x = E IS_ERR(x) // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-09Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', ↵Roland Dreier
'mlx4', 'mthca' and 'nes' into for-next
2008-09-30IB/cm: Correctly free cm_device structureHefty, Sean
commit 110cf374 ("infiniband: make cm_device use a struct device and not a kobject.") introduced a memory leak, since it deleted cm_release_dev_obj(), which was where cm_dev was freed. Fix this by freeing the leaked structure after calling device_unregister(). Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20IB/mad: Don't discard BMA responses in kernelMichael Brooks
This fixes the problem of incoming BMA responses being dropped due to a bad "is response" check. Fix the test to use the ib_response_mad() predicate, which correctly handles BMA MADs. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=988>. Signed-off-by: Michael Brooks <michael.brooks@qlogic.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-07Merge branches 'cma', 'cxgb3', 'ipath', 'ipoib', 'mad' and 'mlx4' into for-linusRoland Dreier
2008-08-07IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULLJulien Brunel
In case of error, the function ib_create_send_mad() returns an ERR pointer, but never returns a NULL pointer. So testing the return value for error should be done with IS_ERR, not by comparing with NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @correct_null_test@ expression x,E; statement S1, S2; @@ x = ib_create_send_mad(...) <... when != x = E if ( ( - x@p2 != NULL + ! IS_ERR ( x ) | - x@p2 == NULL + IS_ERR( x ) ) ) S1 else S2 ...> ? x = E; // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cma: Remove padding arrays by using struct sockaddr_storageRoland Dreier
There are a few places where the RDMA CM code handles IPv6 by doing struct sockaddr addr; u8 pad[sizeof(struct sockaddr_in6) - sizeof(struct sockaddr)]; This is fragile and ugly; handle this in a better way with just struct sockaddr_storage addr; [ Also roll in patch from Aleksey Senin <alekseys@voltaire.com> to switch to struct sockaddr_storage and get rid of padding arrays in struct rdma_addr. ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24RDMA/ucm: BKL is not needed for ib_ucm_open()Roland Dreier
Remove explicit cycle_kernel_lock() call and document why the code is safe. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24RDMA/ucma: BKL is not needed for ucma_open()Roland Dreier
Remove explicit lock_kernel() calls and document why the code is safe. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: MAINTAINERS: Remove Glenn Streiff from NetEffect entry mlx4_core: Improve error message when not enough UAR pages are available IB/mlx4: Add support for memory management extensions and local DMA L_Key IB/mthca: Keep free count for MTT buddy allocator mlx4_core: Keep free count for MTT buddy allocator mlx4_code: Add missing FW status return code IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg mlx4_core: Add module parameter to enable QoS support RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes IPoIB: Include err code in trace message for ib_sa_path_rec_get() failures IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one() IB/ehca: Release mutex in error path of alloc_small_queue_page() IB/ehca: Use default value for Local CA ACK Delay if FW returns 0 IB/ehca: Filter PATH_MIG events if QP was never armed IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event
2008-07-24Merge branches 'bkl-removal', 'cma', 'ehca', 'for-2.6.27', 'mlx4', 'mthca' ↵Roland Dreier
and 'nes' into for-linus
2008-07-22RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributesDotan Barak
Remove IB_ACCESS_LOCAL_WRITE from qp.qp_access_flags because this attribute is only used to set remote permissions. Signed-off-by: Dotan Barak <dotanba@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one()Ralph Campbell
If update_sm_ah() fails, it leaves the port's sm_ah as NULL. Then if the device or module is removed, ib_sa_remove_one() will dereference a NULL pointer when it calls kref_put(). Fix this by testing if sm_ah is NULL before dropping the reference. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT eventAmir Vadai
Consumers that want to re-use their QPs in new connections need to know when the QP has exited the timewait state. Report the timewait event through the rdma_cm. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE eventOr Gerlitz
Add an RDMA_CM_EVENT_ADDR_CHANGE event can be used by rdma-cm consumers that wish to have their RDMA sessions always use the same links (eg <hca/port>) as the IP stack does. In the current code, this does not happen when bonding is used and fail-over happened but the IB link used by an already existing session is operating fine. Use the netevent notification for sensing that a change has happened in the IP stack, then scan the rdma-cm ID list to see if there is an ID that is "misaligned" with respect to the IP stack, and deliver RDMA_CM_EVENT_ADDR_CHANGE for this ID. The consumer can act on the event or just ignore it. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-21infiniband: make cm_device use a struct device and not a kobject.Greg Kroah-Hartman
This object really should be a struct device, or at least contain a pointer to a struct device, as it is trying to create a separate device tree outside of the main device tree. This patch fixes this problem. It is needed for the class core rework that is being done in the driver core. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21infiniband: rename "device" to "ib_device" in cm_deviceGreg Kroah-Hartman
This pointer really is a struct ib_device, not a struct device, so name it properly to help prevent confusion. This makes the followon patch in this series much smaller and easier to understand as well. Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-14RDMA/cma: Simplify locking needed for serialization of callbacksOr Gerlitz
The RDMA CM has some logic in place to make sure that callbacks on a given CM ID are delivered to the consumer in a serialized manner. Specifically it has code to protect against a device removal racing with a running callback function. This patch simplifies this logic by using a mutex per ID instead of a wait queue and atomic variable. This means that cma_disable_remove() now is more properly named to cma_disable_callback(), and cma_enable_remove() can now be removed because it just would become a trivial wrapper around mutex_unlock(). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/addr: Keep pointer to netdevice in struct rdma_dev_addrOr Gerlitz
Keep a pointer to the local (src) netdevice in struct rdma_dev_addr, and copy it in as part of rdma_copy_addr(). Use rdma_translate_ip() in cma_new_conn_id() to reduce some code duplication and also make sure the src_dev member gets set. In a high-availability configuration the netdevice pointer can be used by the RDMA CM to align RDMA sessions to use the same links as the IP stack does under fail-over and route change cases. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/core: Add iWARP protocol statistics attributes in sysfsSteve Wise
This patch adds a sysfs attribute group called "proto_stats" under /sys/class/infiniband/$device/ and populates this group with protocol statistics if they exist for a given device. Currently, only iWARP stats are defined, but the code is designed to allow InfiniBand protocol stats if they become available. These stats are per-device and more importantly -not- per port. Details: - Add union rdma_protocol_stats in ib_verbs.h. This union allows defining transport-specific stats. Currently only iwarp stats are defined. - Add struct iw_protocol_stats to define the current set of iwarp protocol stats. - Add new ib_device method called get_proto_stats() to return protocol statistics. - Add logic in core/sysfs.c to create iwarp protocol stats attributes if the device is an RNIC and has a get_proto_stats() method. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/cma: Add missing newlines to printk()sRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Sean Hefty <sean.hefty@intel.com>
2008-07-14IB/core: Reset to error QP state transition is not allowedRalph Campbell
I was reviewing the QP state transition diagram in the IB 1.2.1 spec and the code for qp_state_table[], and noticed that the code allows a QP to be modified from IB_QPS_RESET to IB_QPS_ERR whereas the notes for figure 124 (pg 457) specifically says that this transition isn't allowed. This is a clarification from earlier versions of the IB spec, which were ambiguous in this area and suggested that the RESET to ERR transition was allowed. Fix up the qp_state_table[] to make RESET->ERR not allowed. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/core: Add memory management extensions supportSteve Wise
This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA: Remove subversion $Id tagsRoland Dreier
They don't get updated by git and so they're worse than useless. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14IB/sa: Fail requests made while creating new SM AHMoni Shoua
This patch solves a race that occurs after an event occurs that causes the SA query module to flush its SM address handle (AH). When SM AH becomes invalid and needs an update it is handled by the global workqueue. On the other hand this event is also handled in the IPoIB driver by queuing work in the ipoib_workqueue that does multicast joins. Although queuing is in the right order, it is done to 2 different workqueues and so there is no guarantee that the first to be queued is the first to be executed. This causes a problem because IPoIB may end up sending an request to the old SM, which will take a long time to time out (since the old SM is gone); this leads to a much longer than necessary interruption in multicast traffer. The patch sets the SA query module's SM AH to NULL when the event occurs, and until update_sm_ah() is done, any request that needs sm_ah fails with -EAGAIN return status. For consumers, the patch doesn't make things worse. Before the patch, MADs are sent to the wrong SM so the request gets lost. Consumers can be improved if they examine the return code and respond to EAGAIN properly but even without an improvement the situation is not getting worse. Signed-off-by: Moni Levy <monil@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA: Fix license textSean Hefty
The license text for several files references a third software license that was inadvertently copied in. Update the license to what was intended. This update was based on a request from HP. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>