aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/ehca/hcp_if.c
AgeCommit message (Collapse)Author
2008-07-14IB/ehca: In case of lost interrupts, trigger EOI to reenable interruptsStefan Roscher
During corner case testing, we noticed that some versions of ehca do not properly transition to interrupt done in special load situations. This can be resolved by periodically triggering EOI through H_EOI, if EQEs are pending. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23IB/ehca: Move high-volume debug output to higher debug levelsJoachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-13IB/ehca: Fix lock flag variable location, bump version numberJoachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-12-12IB/ehca: Serialize HCA-related hCalls if necessaryJoachim Fenkes
Several pSeries firmware versions share a rare locking issue in the HCA-related hCalls. Check for a feature flag that indicates the issue being fixed and serialize all HCA hCalls if not. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Serialize MR alloc and MR free hvCallsJoachim Fenkes
Some firmware levels exhibit a race condition between H_ALLOC_RESOURCE(MR) and H_FREE_RESOURCE(MR). Work around this problem by locking these hvCalls against each other. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Print return codes as signed decimal integersJoachim Fenkes
...because -12 is easier to read than FFFFFFF4. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Refactor hvcall tracingJoachim Fenkes
Change hvcall trace output towards better readability: reg numbers instead of argument numbers, return code as signed decimal instead of unsigned hex. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-28IB/ehca: Move extern declarations from .c files to .h filesHoang-Nam Nguyen
Make sure declarations stay in sync with definitions by keeping all extern declarations in common .h files. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/ehca: Support small QP queuesStefan Roscher
eHCA2 supports QP queues that can be as small as 512 bytes. This greatly reduces memory overhead for consumers that use lots of QPs with small queues (e.g. RDMA-only QPs). Apart from dealing with firmware, this code needs to manage bite-sized chunks of kernel pages, making sure that no kernel page is shared between different protection domains. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
2007-07-20IB/ehca: Support large page MRsHoang-Nam Nguyen
Add support for MR pages larger than 4K on eHCA2. This reduces firmware memory consumption. If enabled via the mr_largepage module parameter, the MR page size will be determined based on the MR length and the hardware capabilities -- if the MR is >= 16M, 16M pages are used, for example. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17IB/ehca: Fix warnings issued by checkpatch.plHoang-Nam Nguyen
Run the existing ehca code through checkpatch.pl and clean up the worst of the coding style violations. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ehca: Lock renaming, static initializersJoachim Fenkes
- Rename all spinlock flags to "flags", matching the vast majority of kernel code. - Move hcall_lock into the only file it's used in. - Replaced spin_lock_init() and friends with static initializers for global variables. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ehca: add Shared Receive Queue supportJoachim Fenkes
Support SRQs on eHCA2. Since an SRQ is a QP for eHCA2, a lot of code (structures, create, destroy, post_recv) can be shared between QP and SRQ. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ehca: QP code restructuring in preparation for SRQJoachim Fenkes
- Replace init_qp_queues() by a shorter init_qp_queue(), eliminating duplicate code. - hipz_h_alloc_resource_qp() doesn't need a pointer to struct ehca_qp any longer. All input and output data is transferred through the parms parameter. - Change the interface to also support SRQ. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-24IB/ehca: Fix number of send WRs reported for new QPStefan Roscher
Due to a typo, the driver was reporting the wrong number of "actual send WRs" after ehca_create_qp(). Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14IB/ehca: Serialize hypervisor calls in ehca_register_mr()Stefan Roscher
Some pSeries hypervisor versions show a race condition in the allocate MR hCall. Serialize this call per adapter to circumvent this problem. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-04-24IB/ehca: Implement modify_portJoachim Fenkes
Add "Modify Port" verb support to eHCA driver. The IB communication manager needs this to set the IsCM port capability bit when initializing. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/ehca: Add driver for IBM eHCA InfiniBand adaptersHeiko J Schick
Add a driver for IBM GX bus InfiniBand adapters, which are usable with some pSeries/System p systems. Signed-off-by: Heiko J Schick <schickhj.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 11:29:12 +0000