aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2006-03-20IB/mthca: Query SRQ srq_limit fixesEli Cohen
Fix endianness handling of srq_limit: it is big-endian in the context structure, so we need to swab it before returning it. Also add support for srq_limit query for Tavor (non-MemFree) HCAs. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Correct reported SRQ size in MemFree case.Dotan Barak
MemFree devices need to reserve one shared receive queue (SRQ) work request for internal use, so the capacity returned from the create_srq and query_srq methods should be srq->max - 1. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Coverity fix to mthca_init_eq_table()Roland Dreier
Fix bug found by coverity: the loop body never executed, because it was doing for (i = 0; i < MTHCA_EQ_CMD; ++i), but MTHCA_EQ_CMD is 0. The correct loop bound is MTHCA_NUM_EQ, to loop over all EQs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Update firmware versionsRoland Dreier
Update known firmware versions in driver's table to the latest releases. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Optimize large messages on Sinai HCAsEli Cohen
Sinai (one-port PCI Express) HCAs get improved throughput for messages bigger than 80 KB in DDR mode if memory keys are formatted in a specific way. The enhancement only works if the memory key table is smaller than 2^24 entries. For larger tables, the enhancement is off and a warning is printed (to avoid silent performance loss). Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Use an enum for HCA page sizeIshai Rabinovitz
Use a named enum for the HCA's internal page size, rather than having magic values of 4096 and shifts by 12 all over the code. Also, fix one minor bug in EQ handling: only one HCA page is mapped to the HCA during initialization, but a full kernel page is unmapped during cleanup. This might cause problems when PAGE_SIZE != 4096. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Check alternate P_Key index when setting alternate pathDotan Barak
Check that the alternate P_Key index is in range when setting the alternate path for a QP. Also make a cosmetic touch up to the debug message printed when the main P_Key index is out of range. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Add support for send work request fence flagDotan Barak
Add support for IB_SEND_FENCE flag in post_send methods. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Implement query_ah methodJack Morgenstein
Implement query_ah (except for AVs which are in HCA memory). This is needed to implement RMPP duplicate session detection on sending side (extraction of DGID/DLID and GRH flag from address handle). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Write FW commands through doorbell pageEli Cohen
This patch is checks whether the HCA supports posting FW commands through a doorbell page (user access region 0, or "UAR0"). If this is supported, the driver maps UAR0 and uses it for FW commands. This can be controlled by the value of a writable module parameter fw_cmd_doorbell. When the parameter is 0, the commands are posted through HCR using the old method; otherwise if HCA is capable commands go through UAR0. This use of UAR0 to post commands eliminates the need for polling the "go" bit prior to posting a new command. Since reading from a PCI device is much more expensive then issuing a posted write, it is expected that issuing FW commands this way will provide better CPU utilization. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Return actual capacity from create_srqDotan Barak
Have mthca's create_srq method return the actual capacity of the SRQ that gets created. Also update comments in <rdma/ib_verbs.h> to clarify that this is what is expected from ib_create_srq(). Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Bump driver version and release dateRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Support for query QP and SRQEli Cohen
Implement the query_qp and query_srq methods in mthca. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Convert to use ib_modify_qp_is_ok()Roland Dreier
Use ib_modify_qp_is_ok() in mthca, and delete the big table of attributes for queue pair state transitions. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Generate SQ drained events when requestedRoland Dreier
Add low-level driver support to ib_mthca so that consumers can request a "send queue drained" event be generated when a transiton to the SQD state completes. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB: Enable FMR pool user to set page sizeOr Gerlitz
This patch allows the consumer to set the page size of "pages" mapped by the pool FMRs, which is a feature already existing in the base verbs API. On the cosmetic side it changes ib_fmr_attr.page_size field to be named page_shift. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Add modify_device method to set node descriptionRoland Dreier
Add a modify_device method to mthca, which implements setting the node description. This makes the writable "node_desc" sysfs attribute work for Mellanox HCAs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Whitespace cleanupsRoland Dreier
Remove trailing whitespace and fix indentation that with spaces instead of tabs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Add device-specific support for resizing CQsRoland Dreier
Add low-level driver support for resizing CQs (both kernel and userspace) to mthca. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Get rid of might_sleep() annotationsRoland Dreier
The might_sleep() annotations in mthca are silly -- they all occur shortly before calls that will end up in core functions like kmalloc() that will print the same warning in an unsafe context anyway. In fact, beyond cluttering the source, we're actually bloating text with CONFIG_DEBUG_SPINLOCK_SLEEP and/or CONFIG_PREEMPT_VOLUNTARY set. With both options set, getting rid of the might_sleep()s saves a lot: add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-171 (-171) function old new delta mthca_pd_alloc 132 109 -23 mthca_init_cq 969 946 -23 mthca_mr_alloc 592 568 -24 mthca_pd_free 67 42 -25 mthca_free_mr 219 194 -25 mthca_free_cq 570 545 -25 mthca_fmr_alloc 742 716 -26 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-20IB/mthca: Make functions that never fail return voidRoland Dreier
The function mthca_free_err_wqe() can never fail, so get rid of its return value. That means handle_error_cqe() doesn't have to check what mthca_free_err_wqe() returns, which means it can't fail either and doesn't have to return anything either. All this results in simpler source code and a slight object code improvement: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-10 (-10) function old new delta mthca_free_err_wqe 83 81 -2 mthca_poll_cq 1758 1750 -8 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-02-13IB/mthca: bump driver version and release dateRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-02-10IB/mthca: Don't print debugging info until we have all valuesRoland Dreier
When debugging is enabled, the mthca_QUERY_DEV_LIM() firmware command function prints out some of the device limits that it queries. However the debugging prints happen before all of the fields are extracted from the firmware response, so some of the values that get printed are uninitialized junk. Move the prints to the end of the function to fix this. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30IB/mthca: Semaphore to mutex conversionsRoland Dreier
Convert semaphores to mutexes in mthca. Leave firmware command interface poll_sem and event_sem as semaphores. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30IB/mthca: Don't cancel commands on a signalMichael S. Tsirkin
We have run into the following problem: if a task receives a signal while in the process of e.g. destroying a resource (which could be because the relevant file was closed) mthca could bail out from trying to take a command interface semaphore without performing the appropriate command to tell hardware that the resource is being destroyed. As a result we see messages like ib_mthca 0000:04:00.0: HW2SW_CQ failed (-4) In this case, hardware could access the resource after the memory has been freed, possibly causing memory corruption. A simple solution is to replace down_interruptible() by down() in command interface activation. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> [ It's also not safe to bail out on multicast table operations, since they may be invoked on the cleanup path too. So use down() for mcg_table.sem too. ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-30IB/mthca: Relax UAR size checkMichael S. Tsirkin
There are some cards around that have UAR (user access region) size different from 8 MB. Relax our sanity check to make sure that the PCI BAR is big enough to access the UAR size reported by the device firmware instead. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-21IB/mthca: Use correct GID in MADs sent on port 2Michael S. Tsirkin
mthca_create_ah() includes the port number in the GID index. The reverse needs to be done in mthca_read_ah(). Noted by Hal Rosenstock. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Initialize grh_present before using itMichael S. Tsirkin
build_mlx_header() was using sqp->ud_header.grh_present before it was initialized by mthca_read_ah(). Furthermore, header->grh_present is set by ib_ud_header_init, so there's no need to set it again in mthca_read_ah(). Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Cosmetic: use the ALIGN macroMichael S. Tsirkin
Use the ALIGN macro to simplify some rounding code. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Fix memory leaks in error handlingJack Morgenstein
Fix memory leaks in mthca_create_qp() and mthca_create_srq() error handling. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-12IB/mthca: Fix memory leak of multicast group structuresIshai Rabinovitz
Convert "/ (1 << lg)" to ">> lg" for a slight code size reduction. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24) function old new delta mthca_map_cmd 613 589 -24 Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-10IB: Add node_guid to struct ib_deviceSean Hefty
Add a node_guid field to struct ib_device. It is the responsibility of the low-level driver to initialize this field before registering a device with the midlayer. Convert everyone to looking at this field instead of calling ib_query_device() when all they want is the node GUID, and remove the node_guid field from struct ib_device_attr. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: Factor common MAD initialization codeRoland Dreier
Factor out common code for initializing MAD packets, which is shared by many query routines in mthca_provider.c, into init_query_mad(). add/remove: 1/0 grow/shrink: 0/4 up/down: 16/-44 (-28) function old new delta init_query_mad - 16 +16 mthca_query_port 521 518 -3 mthca_query_pkey 301 294 -7 mthca_query_device 648 641 -7 mthca_query_gid 453 426 -27 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: kzalloc conversionsRoland Dreier
Convert kmalloc()/memset(,0,) pairs to kzalloc(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: prevent event queue overrunMichael S. Tsirkin
I am seeing EQ overruns in SDP stress tests: if the CQ completion handler arms a CQ, this could generate more EQEs, so that EQ will never get empty and consumer index will never get updated. This is similiar to what we have with command interface: /* * cmd_event() may add more commands. * The card will think the queue has overflowed if * we don't tell it we've been processing events. */ However, for completion events, we *don't* want to update the consumer index on each event. So, perform EQ doorbell coalescing: allocate EQs with some spare EQEs, and update once we run out of them. The value 0x80 was selected to avoid any performance impact. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-09IB/mthca: fix page shift calculation in mthca_reg_phys_mr()Michael S. Tsirkin
For all pages except possibly the last one, the byte beyond the buffer end must be page aligned. Therefore, when computing the page shift to use, OR the end addresses of the buffers as well as the start addresses into the mask we check. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
2006-01-08[PATCH] fix more missing includesTim Schmielau
Include fixes for 2.6.14-git11. Should allow to remove sched.h from module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390. Probably more to come since I haven't yet checked the other archs. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06IB/mthca: Add support for automatic path migration (APM)Dotan Barak
Add code to modify QP operation to handle setting alternate paths for connected QPs. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: Fill in vendor_err field in completion with errorMichael S. Tsirkin
Fill vendor_err field in completion with error. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: multiple fixes for multicast group handlingJack Morgenstein
Multicast group management fixes: . Fix leak of mailbox memory in error handling on multicast group operations. . Free AMGM indices at detach and in attach error handling. . Fix amount to shift for aligning next_gid_index in mailbox: it starts at bit 6, not bit 5. . Allocate AMGM index after end of MGM table, in the range num_mgms to multicast table size - 1. Add some BUG_ON checks to catch cases where the index falls in the MGM hash area. . Initialize the list of QPs in a newly-allocated group from AMGM to 0 This is necessary since when a group is moved from AMGM to MGM (in the case where the MGM entry has been emptied of QPs), the AMGM entry is not reset to 0 (and we don't want an extra command to do that). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: fix for RTR-to-RTS transition in modify QPJack Morgenstein
PKEY_INDEX is not a legal parameter in the RTR->RTS transition. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: fix for SQEr-to-RTS transition in modify QPJack Morgenstein
Fixes to SQEr->RTS transition in modify_qp: 1. The flag IB_QP_ACCESS_FLAGS is optional for UC qps 2. The SQEr state is not supported for RC qps Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-06IB/mthca: max_inline_data handling tweaksJack Morgenstein
Fix a case where copying max_inline_data from a successful create_qp capabilities output to create_qp input could cause EINVAL error: mthca_set_qp_size must check max_inline_data directly against max_desc_sz; checking qp->sq.max_gs is wrong since max_inline_data depends on the qp type and does not involve max_sg. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05IB/mthca: create_eq with size not a power of 2Michael S. Tsirkin
Fix mthca_create_eq for when the EQ size is not a power of 2. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05IB/mthca: check port validity in modify_qpJack Morgenstein
Modify_qp should check that the physical port number provided is a legal value. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-05IB/mthca: check return value in mthca_dev_lim callJack Morgenstein
Check error return on call to mthca_dev_lim for Tavor (as is done for memfree). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-04IB/mthca: fix WQE size calculation in create-srqJack Morgenstein
Thinko: 64 bytes is the minimum SRQ WQE size (not the maximum). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15IB/mthca: Fix corner cases in max_rd_atomic value handling in modify QPJack Morgenstein
sae and sre bits should only be set when setting sra_max. Further, in the old code, if the caller specifies max_rd_atomic = 0, the sre and sae bits are still set, with the result that the QP ends up with max_rd_atomic = 1 in effect. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-12-15IB/mthca: Fix IB_QP_ACCESS_FLAGS handling.Jack Morgenstein
This patch corrects some corner cases in managing the RAE/RRE bits in the mthca qp context. These bits need to be zero if the user requests max_dest_rd_atomic of zero. The bits need to be restored to the value implied by the qp access flags attribute in a previous (or the current) modify-qp command if the dest_rd_atomic variable is changed to non-zero. In the current implementation, the following scenario will not work: RESET-to-INIT set QP access flags to all disabled (zeroes) INIT-to-RTR set max_dest_rd_atomic=10, AND set qp_access_flags = IB_ACCESS_REMOTE_READ | IB_ACCESS_REMOTE_ATOMIC The current code will incorrectly take the access-flags value set in the RESET-to-INIT transition. We can simplify, and correct, this IB_QP_ACCESS_FLAGS handling: it is always safe to set qp access flags in the firmware command if either of IB_QP_MAX_DEST_RD_ATOMIC or IB_QP_ACCESS_FLAGS is set, so let's just set it to the correct value, always. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 05:50:26 +0000