aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2008-12-30IB/mlx4: Fix reading SL field out of cqe->sl_vidRoland Dreier
Commit f780a9f1 ("mlx4_core: Add ethernet fields to CQE struct") introduced a bug in how wc->sl is set in mlx4_ib_poll_one() -- since cqe->sl_vid is a big-endian value, the shift must be done after converting to host endianness. This bug was found using sparse endianness checking. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-26net: Fix warning fallout from recent NAPI interface changes.David S. Miller
When we removed the network device argument from several NAPI interfaces in 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces.") several drivers now started getting unused variable warnings. This fixes those up. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-24Merge branches 'cma', 'ehca', 'ipath', 'iser', 'mlx4' and 'nes' into for-nextRoland Dreier
2008-12-24IB/mlx4: Set ownership bit correctly when copying CQEs during CQ resizeJack Morgenstein
When resizing a CQ, when copying over unpolled CQEs from the old CQE buffer to the new buffer, the ownership bit must be set appropriately for the new buffer, or the ownership bit in the new buffer gets corrupted. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-24RDMA/nes: Remove tx_free_listFaisal Latif
There is no lock protecting tx_free_list thus causing a system crash when skb_dequeue() is called and the list is empty. Since it did not give any performance boost under heavy load, remove it to simplify the code. Replace get_free_pkt() with dev_alloc_skb() to allocate MAX_CM_BUFFER skb for connection establishment/teardown as well as MPA request/response. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22mlx4_core: Add support for multiple completion event vectorsYevgeny Petrilin
When using MSI-X mode, create a completion event queue for each CPU. Report the number of completion EQs in a new struct mlx4_caps member, num_comp_vectors, and extend the mlx4_cq_alloc() interface with a vector parameter so that consumers can specify which completion EQ should be used to report events for the CQ being created. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-21IB/ehca: Remove redundant test of vpageJulia Lawall
vpage is checked not to be NULL just after it is initialized at the beginning of each loop iteration. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ehca: Replace modulus operations in flush error completion pathStefan Roscher
With the latest flush error completion patch we introduced modulus operation to calculate the next index within a qmap. Based on comments from other mailing lists we decided to optimize this operation by using an addition and an if-statement instead of modulus, even though this is on the error path. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Add locking for interrupt use of ipath_pd contexts vs freeDave Olson
Fixes timing race resulting in panic. Not a performance sensitive path. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Fix spi_pioindex valueDave Olson
ipath_piobufbase was a single value offset, but is multiple values on newer chips, so use only the 32 bits for the 2K buffers (4K buffers are currently used only by the driver). Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Only do 1X workaround on rev1 chipsDave Olson
Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Don't count IB symbol and link errors unless link is UPDave Olson
Implement the ignoring of ibsymbol errors and linkrecover errors while the link is at less than INIT (long needed), to get accurate counts. Particularly an issue when doing non-IBTA DDR negotiation with chips from vendors that do not support IBTA mode negotiation. If the driver is unloaded, and there is a delta, the adjusted counters are written back to the chip, so they stay adjusted across driver reload. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Check return value of dma_map_single()Ralph Campbell
This fixes an obvious oversight where the return value is not checked for error. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05IB/ipath: Fix PSN of send WQEs after an RDMA read resendRalph Campbell
The PSN of the first packet after an RDMA read is based on the size of the RDMA read request. This is calculated correctly for the WQE sent after the first request message but not on subsequent requests if the RDMA read is resent. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Cleanup warningsChien Tung
Wrap NES_DEBUG and assert macros with do while (0) to avoid ambiguous else. No one is using sk_buff * returned from form_cm_frame(), so drop the return. drop_packet() should not be incrementing reset counter on receiving a FIN. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Add loopback check to make_cm_node()Chien Tung
Check for loopback connection in make_cm_node(). Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Check cqp_avail_reqs is empty after locking the listFaisal Latif
Between the first empty list check and locking the list, the list can change. Check it again after it is locked to make sure the list is still not empty. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Fix TCP compliance test failuresFaisal Latif
ANVL testing showed we are not handling all cm_node states during connection establishment. Add missing state handlers and fix sequence number send reset in handle_tcp_options(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Forward packets for a new connection with stale APBVT entryFaisal Latif
Under heavy traffic, there is a small windows when an APBVT entry is not yet removed and a new connection is established. Packets for the new connection are dropped until APBVT entry is removed. This patch will forward the packets instead of dropping them. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Avoid race between MPA request and reset event to rdma_cmFaisal Latif
In passive open, after indicating MPA request to rdma_cm, an incoming RST would fire a reset event to rdma_cm causing it to crash, since the current state is not connected. The solution is to wait for nes_accept() or nes_reject() before firing the reset event. If nes_accept() or nes_reject() is already done, then the reset event will be fired when RST is processed. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Lock down connected_nodes list while processing itFaisal Latif
While processing connected_nodes list, we would release the lock when we need to send reset to remote partner. That created a window where the list can be modified. Change this into a two step process: place nodes that need processing on a local list then process the local list. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-05RDMA/nes: Cleanup cqp_request list usageFaisal Latif
Use nes_free_cqp_request() instead of open coding. Change some continue to break in nes_cm_timer_tick, because send_entry used to be a list processed in a loop (so continue went to the next item). Now it is a single item, so using break is correct. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ixgbe/ixgbe_main.c drivers/net/smc91x.c
2008-12-01IB/ipath: Improve UD loopback performance by allocating temp array only onceRalph Campbell
Receive work queue entries are checked for L_Key validity, and pointers to the memory region structure are saved in an allocated structure. For UD loopback packets, this structure is allocated and freed for each packet. This patch changes that to allocate/free during QP creation and destruction. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-01IB/ipath: Fix pointer-to-pointer thinko in ipath_fs.cMichael Ellerman
The return from lookup_one_len() is assigned to *dentry, so that's what we should be checking with IS_ERR(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-01IB/ehca: Fix locking for shca_list_lockJoachim Fenkes
shca_list_lock is taken from softirq context in ehca_poll_eqs, so we need to lock IRQ safe elsewhere. Found by lockdep. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-01Merge branches 'ehca' and 'mlx4' into for-linusRoland Dreier
2008-12-01IB/mlx4: Fix MTT leakage in resize CQJack Morgenstein
When resizing a CQ, MTTs associated with the old CQE buffer were not freed. As a result, if any app used resize CQ repeatedly, all MTTs were eventually exhausted, which led to all memory registration operations failing until the driver is reloaded. Once the RESIZE_CQ command returns successfully from FW, FW no longer accesses the old CQ buffer, so it is safe to deallocate the MTT entries used by the old CQ buffer. Finally, if the RESIZE_CQ command fails, the MTTs allocated for the new CQEs buffer also need to be de-allocated. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1416>. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-01IB/ehca: Fix problem with generated flush work completionsStefan Roscher
This fix enables ehca device driver to generate flush work completions even if the application doesn't request completions for all work requests. The current implementation of ehca will generate flush work completions for the wrong work requests if an application uses non signaled work completions. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-01IB/ehca: Change misleading error message on memory hotplugJoachim Fenkes
The error message printed when the eHCA driver prevents memory hotplug is misleading -- the user might think that hot-removing the lhca, hotplugging memory, then hot-adding the lhca again will work, but it actually doesn't. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-24infiniband: Kill directly reference of netdev->privWang Chen
This use of netdev->priv is wrong. The right way is: alloc_netdev() with no memory for private data. make netdev->ml_priv to point to c2_dev. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/isdn/i4l/isdn_net.c fs/cifs/connect.c
2008-11-12Merge branches 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mlx4' and 'nes' into for-nextRoland Dreier
2008-11-12RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface)Steve Wise
When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-11IB/ehca: Remove reference to special QP in case of port activation failureStefan Roscher
If the initialization of a special QP (e.g. AQP1) fails due to a software timeout, we have to remove the reference to that special QP struct from the port struct to stop the driver from accessing the QP, since it will be/has been destroyed by the caller, eg in this case ib_mad. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-05IB/mlx4: Set umem field to NULL in mlx4_ib_alloc_fast_reg_mr()Vladimir Sokolovsky
Set mr->umem to NULL in mlx4_ib_alloc_fast_reg_mr(). Otherwise ib_dereg_mr() may invoke ib_umem_release() on a random pointer value and get an oops. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-02RDMA/nes: Mitigate compatibility issue regarding PCIe write creditsChien Tung
Under heavy load, there is an compatibility issue regarding PCIe write credits with certain chipsets. It can be mitigated by limiting read requests to 256 Bytes. This workaround is always enabled for Tbird2 on Gladius. We also add a module parameter to enable workaround for non-Gladius cards. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-02RDMA/nes: Fix CQ allocation scheme for multicast receive queue appsVadim Makhervaks
Fix CQ allocation for multicast receive queue applications. Before this patch, the CQ was not lined up with the right NIC. Signed-off-by: Vadim Makhervaks <vadim.makhervaks@intel.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-02RDMA/nes: Correct handling of PBL resourcesChien Tung
* Roll back allocated structures on failures. * Use GFP_ATOMIC instead of GFP_KERNEL since we are holding a lock. * Acquire nesadapter->pbl_lock when modifying PBL counters. * Decrement PBL counters on deallocation. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-02RDMA/nes: Reindent mis-indented spinlocksIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-11-01RDMA/cxgb3: Fix too-big reserved field zeroing in iwch_post_zb_read()Roland Dreier
The array wqe->read.reserved has only two entries, but iwch_post_zb_read() sets [0], [1], and [2], which is one too many. This is harmless since it runs into the next field, rem_stag, which is initialized correctly immediately after, but we might as well get things right, especially since it makes the code smaller. This was spotted by the Coverity checker (CID 2475). Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Steve Wise <swise@opengridcomputing.com>
2008-10-31drivers: replace NIPQUAD()Harvey Harrison
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29net: easy removals of HIPQUAD using %pI4 formatHarvey Harrison
As a bonus, removes some unnecessary byteswapping. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29net: replace %p6 with %pI6Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28infiniband: use %p6 for printing message idsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27IB/ipath: Fix RDMA write with immediate copy of last packetRalph Campbell
When the last packet of a RDMA write with immediate is received, the next receive work queue entry ID should be used to generate a completion entry. The code was incorrectly resetting part of the state used to copy the last packet. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Reject dynamic memory add/remove when ehca adapter is present IB/ehca: Fix reported max number of QPs and CQs in systems with >1 adapter IPoIB: Set netdev offload features properly for child (VLAN) interfaces IPoIB: Clean up ethtool support mlx4_core: Add Ethernet PCI device IDs mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC mlx4_core: Multiple port type support mlx4_core: Ethernet MAC/VLAN management mlx4_core: Get ethernet MTU and default address from firmware mlx4_core: Support multiple pre-reserved QP regions Update NetEffect maintainer emails to Intel emails RDMA/cxgb3: Remove cmid reference on tid allocation failures IB/mad: Use krealloc() to resize snoop table IPoIB: Always initialize poll_timer to avoid crash on unload IB/ehca: Don't allow creating UC QP with SRQ mlx4_core: Add QP range reservation support RDMA/ucma: Test ucma_alloc_multicast() return against NULL, not with IS_ERR()
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 20:17:36 +0000