aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2008-10-16device create: infiniband: convert device_create_drvdata to device_createGreg Kroah-Hartman
Now that device_create() has been audited, rename things back to the original call to be sane. Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-09Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', ↵Roland Dreier
'mlx4', 'mthca' and 'nes' into for-next
2008-10-09RDMA/nes: Fix slab corruptionChien Tung
Referencing cm_node after it is freed via rem_ref_cm_node() causes a slab corruption. There is no need to set cm_node->cm_id to NULL in mini_cm_close(). Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-08IB/mlx4: Set RLKEY bit for kernel QPsVladimir Sokolovsky
Set RLKEY bit in the HW context for kernel QPs so that kernel QPs can use the reserved L_Key for memory reference. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-08RDMA/nes: Correct error_module bit maskChien Tung
error_module is 5 bits wide not 4. The corresponding crit_error_count array is correct with 32 entries. Signed-off-by: Chien Tung <ctung@neteffect.com> -- drivers/infiniband/hw/nes/nes_hw.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-03RDMA/nes: Fix routed RDMA connectionsBob Sharp
Fix routed RDMA connections to destinations where the next hop is not the final destination. Use neigh_*() to properly locate neighbor. Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com>
2008-10-03RDMA/nes: Enhanced PFT management schemeVadim Makhervaks
Change management of perfect filter table to allow enhanced performance applications. Signed-off-by: Vadim Makhervaks <vmakhervaks@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Handle AE bounds violationFaisal Latif
Handle async error NES_AEQE_AEID_AMP_BOUNDS_VIOLATION. Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Limit critical error interruptsChien Tung
Mask off a critical error after 100 critical error interrupts to keep the system "sane". Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Stop spurious MAC interruptsChien Tung
Mask off MAC interrupts on netdev_stop to prevent spurious MAC interrupts on unload/reload of iw_nes. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Correct tso_wqe_lengthChien Tung
Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Fill in firmware version for ethtoolChien Tung
Fill in firmware version for ethtool_drvinfo. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Use ethtool timer valueJohn Lacombe
Use timer value set via ethtool intead of #defines. Signed-off-by: John Lacombe <jlacombe@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Correct MAX TSO frags valueBob Sharp
Use correct define for max TSO fragments. Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Enable MC/UC after changing MTUBob Sharp
Re-enable multicast and unicast after changing MTU. Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Free NIC TX buffers when destroying NIC QPBob Sharp
Signed-off-by: Bob Sharp <bsharp@neteffect.com> Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Fix MDC settingChien Tung
Clear MDC bits before setting them to a new value. Adjust MDC value for 10G. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Add wqm_quanta module optionChien Tung
Add a module parameter wqm_quanta. It controls the number of segments transmitted at a time. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Module parameter permissionsChien Tung
Change permission to 0644 so root can set mpa_version, disable_mpa_crc, send_first, and nes_drv_opt at runtime. Signed-off-by: Sweta Bhatt <sweta.bhatt@einfochips.com> Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/cxgb3: Set active_mtu in ib_port_attrJon Mason
When running ibv_devinfo, the active_mtu returned is garbage. This is due to the field not being populated in the query_port function in the driver. The patch below populates the active_mtu field with a MTU of 2k. It also zeros the struct, so that any new additions to it will return 0. Signed-off-by: Jon Mason <jon@opengridcomputing.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Add support for 4-port 1G HP blade cardChien Tung
Add support for NetEffect 4 port 1G HP blade card. The mapping between physical port and MAC is different from the standup card. Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-30RDMA/nes: Make mini_cm_connect() staticFaisal Latif
Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29IB/mthca: Use pci_request_regions()Roland Dreier
Back in prehistoric (pre-git!) days, the kernel's MSI-X support did request_mem_region() on a device's MSI-X tables, which meant that a driver that enabled MSI-X couldn't use pci_request_regions() (since that would clash with the PCI layer's MSI-X request). However, that was removed (by me!) years ago, so mthca can just use pci_request_regions() and pci_release_regions() instead of its own much more complicated code that avoids requesting the MSI-X tables. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-29IB/ipath: Fix hang on module unloadYannick Cote
Handle the case where posting a send is requested when the link is down. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1117>. Signed-off-by: Yannick Cote <yannick.cote@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20IB: Drop code after return statementJulia Lawall
A break after a return serves no purpose, remove it. Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20IB/ipath: Fix SLID generation for RC/UC QPs when LMC > 0Ralph Campbell
The code to set the source LID in the sent LRH was not setting the low bits if LMC != 0 for RC/UC QPs. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-20IB/ehca: Generate flush status CQ entriesAlexander Schmidt
When a QP goes into error state, it is required that CQ entries with a flush error status are delivered to the application for any outstanding work requests. eHCA does not do this in hardware, so this patch adds software flush CQE generation to the ehca driver. Whenever a QP gets into error state, it is added to the QP error list of its respective CQ. If the error QP list of a CQ is not empty, poll_cq() generates flush CQEs before polling the actual CQ. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop() RDMA/nes: Fix client side QP destroy IB/mlx4: Fix up fast register page list format mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-16Merge branches 'ipoib', 'mlx4' and 'nes' into for-linusRoland Dreier
2008-09-16RDMA/nes: Fix client side QP destroyFaisal Latif
Fix QP not being destroyed properly on the client, which leads to userspace programs hanging on exit. This is a missing chunk from the connection management rewrite in commit 6492cdf3 ("RDMA/nes: CM connection setup/teardown rework"). Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-15IB/mlx4: Fix up fast register page list formatVladimir Sokolovsky
Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-27IB/mlx4: Actually return L_Key and R_Key for fast register MRsVladimir Sokolovsky
Initialize the L_Key and R_Key for memory regions returned from mlx4_ib_alloc_fast_reg_mr(). Otherwise callers just get garbage for the memory keys and can't do anything useful with these MRs. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-15IB/ipath: Fix incorrect check for max physical address in TIDDave Olson
The check for max physical address was incorrect, thus limiting the range of allowed physical addresses. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-15IB/ipath: Fix lost UD send work requestRalph Campbell
If a UD QP has some work requests queued to be sent by the DMA engine followed by a local loopback work request, we have to wait for the previous work requests to finish or the completion for the local loopback work request would be generated out of order. The problem was that the work request queue pointer was already updated so that the request would not be processed when the DMA queue drained. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Discard double CQE for one WRAlexander Schmidt
Under rare circumstances, the ehca hardware might erroneously generate two CQEs for the same WQE, which is not compliant to the IB spec and will cause unpredictable errors like memory being freed twice. To avoid this problem, the driver needs to detect the second CQE and discard it. For this purpose, introduce an array holding as many elements as the SQ of the QP, called sq_map. Each sq_map entry stores a "reported" flag for one WQE in the SQ. When a work request is posted to the SQ, the respective "reported" flag is set to zero. After the arrival of a CQE, the flag is set to 1, which allows to detect the occurence of a second CQE. The mapping between WQE / CQE and the corresponding sq_map element is implemented by replacing the lowest 16 Bits of the wr_id with the index in the queue map. The original 16 Bits are stored in the sq_map entry and are restored when the CQE is passed to the application. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Check idr_find() return valueAlexander Schmidt
The idr_find() function may fail when trying to get the QP that is associated with a CQE, e.g. when a QP has been destroyed between the generation of a CQE and the poll request for it. In consequence, the return value of idr_find() must be checked and the CQE must be discarded when the QP cannot be found. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Repoll CQ on invalid opcodeAlexander Schmidt
When the ehca driver detects an invalid opcode in a CQE, it currently passes the CQE to the application and returns with success. This patch changes the CQE handling to discard CQEs with invalid opcodes and to continue reading the next CQE from the CQ. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Rename goto label in ehca_poll_cq_one()Alexander Schmidt
Rename the "poll_cq_one_read_cqe" goto label to what it actually does, namely "repoll". Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Update qp_state on cached modify_qp()Alexander Schmidt
Since the introduction of the port auto-detect mode for ehca, calls to modify_qp() may be cached in the device driver when the ports are not activated yet. When a modify_qp() call is cached, the qp state remains untouched until the port is activated, which will leave the qp in the reset state. In the reset state, however, it is not allowed to post SQ WQEs, which confuses applications like ib_mad. The solution for this problem is to immediately set the qp state as requested by modify_qp(), even when the call is cached. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULL IB/mlx4: Allow 4K messages for UD QPs mlx4_core: Add ethernet fields to CQE struct IB/ipath: Fix printk format warnings RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 device RDMA/cxgb3: Fix up MW access rights RDMA/cxgb3: Fix QP capabilities RDMA/cma: Remove padding arrays by using struct sockaddr_storage IB/ipath: Use unsigned long for irq flags IPoIB/cm: Set correct SG list in ipoib_cm_init_rx_wr()
2008-08-07Merge branches 'cma', 'cxgb3', 'ipath', 'ipoib', 'mad' and 'mlx4' into for-linusRoland Dreier
2008-08-07IB/mlx4: Allow 4K messages for UD QPsAlex Naslednikov
Current code limits the max message size to 2K for UD QPs, while MTU might be as big as 4K. This patch sets the maximum message size to 4K, which is needed for UD to work correctly on fabrics with a 4K MTU. Signed-off-by: Alex Naslednikov <xalex@mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-06mlx4_core: Add ethernet fields to CQE structYevgeny Petrilin
Add ethernet-related fields to struct mlx4_cqe so that the mlx4_en ethernet NIC driver can share the same definition. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04IB/ipath: Fix printk format warningsAlexander Beregalov
ipath_driver.c:1260: warning: format '%Lx' expects type 'long long unsigned int', but argument 6 has type 'long unsigned int' ipath_driver.c:1459: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_intr.c:358: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:358: warning: format '%Lu' expects type 'long long unsigned int', but argument 6 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 5 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1123: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1130: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1032: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1045: warning: format '%llX' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_iba7220.c:2506: warning: format '%Lu' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 deviceSteve Wise
Running 'ifconfig up' on the cxgb3 interface with iw_cxgb3 loaded causes a deadlock. The rtnl lock is already held in this path. The function fw_supports_fastreg() was introduced in 2.6.27 to conditionally set the IB_DEVICE_MEM_MGT_EXTENSIONS bit iff the firmware was at 7.0 or greater, and this function also acquires the rtnl lock and which thus causes a deadlock. Further, if iw_cxgb3 is loaded _after_ the nic interface is brought up, then the deadlock does not occur and therefore fw_supports_fastreg() does need to grab the rtnl lock in that path. It turns out this code is all useless anyway. The low level driver will NOT allow the open if the firmware isn't 7.0, so iw_cxgb3 can always set the MEM_MGT_EXTENSIONS bit. Simplify... Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cxgb3: Fix up MW access rightsSteve Wise
- MWs don't have local read/write permissions. - Set the MW_BIND enabled bit if a MR has MW_BIND access. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cxgb3: Fix QP capabilitiesSteve Wise
- Set the stag0 and fastreg capability bits only for kernel qps. - QP_PRIV flag is no longer used, so don't set it. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-01Remove newline from the description of module parametersNiels de Vos
Some module parameters with only one line have the '\n' at the end of the description. This is not needed nor wanted as after the description the type (i.e. int) is followed by a newline. Some modules contain a multi-line description, these are not affected by this patch. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 23:44:47 +0000