aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)Author
2007-04-26Revert "[POWERPC] Rename get_property to of_get_property: drivers"Paul Mackerras
This reverts commit d05c7a80cf39ae7d0f8d0c3e47c93d51fcd393d3, which included changes which should go via other subsystem maintainers.
2007-04-13[POWERPC] Rename get_property to of_get_property: driversStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] get_property returns constStephen Rothwell
This just tidies up some of the remains. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26IB/mthca: Fix thinko in init_mr_table()Michael S. Tsirkin
Commit c20e20ab ("IB/mthca: Merge MR and FMR space on 64-bit systems") swapped the number of MTTs and MPTs when initializing the MR table. As a result, we get a kernel oops when the number of MTT segments allocated exceeds 0x20000. Noted by Troy Benjegerdes <troy@scl.ameslab.gov>, and reproduced by Dotan Barak <dotanb@mellanox.co.il>. This fixes https://bugs.openfabrics.org/show_bug.cgi?id=490 Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-26RDMA/cxgb3: Fix resource leak in cxio_hal_init_ctrl_qp()Steve Wise
This was spotted by the Coverity checker (CID 1554). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IB/ehca: Make scaling code work without CPU hotplugJoachim Fenkes
eHCA scaling code must not depend on register_cpu_notifier() if CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()Steve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IB/ipath: Check return value of lookup_one_lenBryan O'Sullivan
This fixes kernel.org bug 8003. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-14[PATCH] fix ipath_dma_free_coherent() prototypeAl Viro
method gets u64, not dma_addr_t Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06RDMA/cxgb3: Fix MR permission problemsSteve Wise
Fix memory region permission problems: - remove useless and redundant iwch_mem_perms enum. - create ib_to_tpt_access_rights() for mapping ib access rights to T3 TPT permissions. - create ib_to_mwbind_access_rights() for mapping ib access rights to T3 MWBIND WR permissions. - fix up the mem reg code to utilize the new functions. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Don't reuse skbs that are non-linear or clonedSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Squelch logging AE errorsSteve Wise
Only print one AE error for a given connection in the kernel log. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Stop EP timer when MPA exchange is aborted by peerSteve Wise
Stop the endpoint timer when the MPA exchange is aborted by the peer. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Move QP to error on destroy if the state is IDLESteve Wise
Change iwch_destroy_qp() to always move the QP to ERROR and let iwch_modify_qp() decide what to do. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Fixes for "normal close" failuresSteve Wise
Fixes for "normal close" failures: - Start normal close timer when moving to CLOSING state. - Handle ABORTING state in close_con_rpl(). - Stop timer correctly on abort during a normal close. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Fix build on sparc64David Miller
cxgb3 uses dma_alloc_coherent() et al. thus needs linux/dma-mapping.h include in order to build reliably. Noticed on sparc64. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Don't use mm after it's freed in iwch_mmap()Steve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-06RDMA/cxgb3: Start ep timer on a MPA rejectSteve Wise
If the consumer rejects the connection we end up under-referencing the endpoint structure. The fix is to call iwch_ep_disconnect() instead of the low level disconnect functions so that the endpoint close timer is started correctly. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-01IB/mthca: Fix error path in mthca_alloc_memfree()Roland Dreier
The garbled logic in mthca_alloc_memfree() causes it to return 0, even if it fails to allocate all doorbell records. Fix it to return -ENOMEM when it fails. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-01IB/ehca: Fix sync between completion handler and destroy cqHoang-Nam Nguyen
This patch fixes two issues reported by Roland Dreier and Christoph Hellwig: - Mismatched sync/locking between completion handler and destroy cq We introduced a counter nr_events per cq to track number of irq events seen. This counter is incremented when an event queue entry is seen and decremented after completion handler has been called regardless if scaling code is active or not. Note that nr_callbacks tracks number of events assigned to a cpu and both counters can potentially diverge. The sync between running completion handler and destroy cq is done by using the global spin lock ehca_cq_idr_lock. - Replace yield by wait_event on the counter above to become zero. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23RDMA/cxgb3: Stop the EP Timer on BAD CLOSESteve Wise
Stop the ep timer in ec_status() if the status indicates a bad close. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-23RDMA/cxgb3: cleanupsAdrian Bunk
- don't mark static functions in C files as inline - gcc should know best whether inlining makes sense - never compile the unused cxio_dbg.c - make the following needlessly global functions static: - cxio_hal.c: cxio_hal_clear_qp_ctx() - iwch_provider.c: iwch_get_qp() - remove the following unused global functions: - cxio_hal.c: cxio_allocate_stag() - cxio_resource.: cxio_hal_get_rhdl() - cxio_resource.: cxio_hal_put_rhdl() Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-20IB/mthca: Make 2 functions staticAdrian Bunk
This patch makes the needlessly global functions mthca_tavor_write_mtt_seg() and mthca_arbel_write_mtt_seg() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) Documentation/kernel-docs.txt update. arch/cris: typo in KERN_INFO Storage class should be before const qualifier kernel/printk.c: comment fix update I/O sched Kconfig help texts - CFQ is now default, not AS. Remove duplicate listing of Cris arch from README kbuild: more doc. cleanups doc: make doc. for maxcpus= more visible drivers/net/eexpress.c: remove duplicate comment add a help text for BLK_DEV_GENERIC correct a dead URL in the IP_MULTICAST help text fix the BAYCOM_SER_HDX help text fix SCSI_SCAN_ASYNC help text trivial documentation patch for platform.txt Fix typos concerning hierarchy Fix comment typo "spin_lock_irqrestore". Fix misspellings of "agressive". drivers/scsi/a100u2w.c: trivial typo patch Correct trivial typo in log2.h. Remove useless FIND_FIRST_BIT() macro from cardbus.c. ...
2007-02-17Various typo fixes.Robert P. J. Day
Correct mis-spellings of "algorithm", "appear", "consistent" and (shame, shame) "kernel". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-16IB/ipath: Make ipath_map_sg() staticRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16RDMA/cxgb3: Remove Open Grid Computing copyrights in iw_cxgb3 driverSteve Wise
Remove the Open Grid Computing copyright. It shouldn't be there. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16RDMA/cxgb3: Fail posts synchronously when in TERMINATE stateSteve Wise
For T3B devices, mark user QP in error once we transition to TERMINATE. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/ehca: Change query_port() to return LINK_UP instead UNKNOWNHoang-Nam Nguyen
Set the port phys state as returned from ehca_query_port() to LINK_UP. ehca actually represents a logical HCA, whose phys/link state always is LINK_UP. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/ehca: Allow en/disabling scaling code via module parameterHoang-Nam Nguyen
Allow users to en/disable scaling code when loading ib_ehca module, rather than requiring the module to be rebuilt to change the setting. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/ehca: Fix race condition/locking issues in scaling codeHoang-Nam Nguyen
Fix a race condition in find_next_cpu_online() and some other locking issues in ehca scaling code. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/ehca: Rework irq handlerHoang-Nam Nguyen
Rework ehca interrupt handling to avoid/reduce missed irq events. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/mthca: Fix allocation of ICM chunks in coherent memoryRoland Dreier
The change to allow allocating ICM chunks from coherent memory did not increment the count of sg entries properly, so a chunk that required more than allocation would not be mapped properly by the HCA. Fix this by adding the missing increment of chunk->nsg. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/mthca: Allow the QP state transition RESET->RESETDotan Barak
RESET->RESET is an allowed QP state transition, so mthca should handle it correctly, by just returning success without involving the firmware. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-14[PATCH] Scheduled removal of SA_xxx interrupt flags fixupsThomas Gleixner
The obsolete SA_xxx interrupt flags have been used despite the scheduled removal. Fixup the remaining users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Roland Dreier <rolandd@cisco.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Dave Airlie <airlied@linux.ie> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-13Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Always fill MTTs from CPU IB/mthca: Merge MR and FMR space on 64-bit systems IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs IB/mthca: Give reserved MTTs a separate cache line IB/mthca: Fix reserved MTTs calculation on mem-free HCAs RDMA/cxgb3: Add driver for Chelsio T3 RNIC IB: Remove redundant "_wq" from workqueue names RDMA/cma: Increment port number after close to avoid re-use IB/ehca: Fix memleak on module unloading IB/mthca: Work around gcc bug on sparc64 IPoIB: Connected mode experimental support IB/core: Use ARRAY_SIZE macro for mandatory_table IB/mthca: Use correct structure size in call to memset()
2007-02-12IB/mthca: Always fill MTTs from CPUMichael S. Tsirkin
Speed up memory registration by filling in MTTs directly when the CPU can write directly to the whole table (all mem-free cards, and to Tavor mode on 64-bit systems with the patch I posted earlier). This reduces the number of FW commands needed to register an MR by at least a factor of 2 and speeds up memory registration significantly. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12IB/mthca: Merge MR and FMR space on 64-bit systemsMichael S. Tsirkin
For Tavor, we currently reserve separate MPT and MTT space for FMRs to avoid abusing the vmalloc space on 32 bit kernels. No such problem exists on 64 bit kernels so let's not do it there. This way we have a shared pool for MR and FMR resources, used on demand. This will also make it possible to write MTTs for regular regions directly from driver. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUsMichael S. Tsirkin
We allocate the MTT table with alloc_pages() and then do pci_map_sg(), so we must call pci_dma_sync_sg() after the CPU writes to the MTT table. This works since the device will never write MTTs on mem-free HCAs, once we get rid of the use of the WRITE_MTT firmware command. This change is needed to make that work, and is an improvement for now, since it gives FMRs a chance at working. For MPTs, both the device and CPU might write there, so we must allocate DMA coherent memory for these. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12IB/mthca: Give reserved MTTs a separate cache lineMichael S. Tsirkin
MTTs are allocated in non-cache-coherent memory, so we must give reserved MTTs their own cache line, to prevent both device and CPU from writing into the same cache line at the same time. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12IB/mthca: Fix reserved MTTs calculation on mem-free HCAsMichael S. Tsirkin
The reserved_mtts field has different meaning in Tavor and Arbel, so we are wasting mtt entries on memfree. Fix the Arbel case to match Tavor semantics. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12RDMA/cxgb3: Add driver for Chelsio T3 RNICSteve Wise
Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-12[PATCH] mark struct file_operations const 3Arjan van de Ven
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] Transform kmem_cache_alloc()+memset(0) -> kmem_cache_zalloc().Robert P. J. Day
Replace appropriate pairs of "kmem_cache_alloc()" + "memset(0)" with the corresponding "kmem_cache_zalloc()" call. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Roland McGrath <roland@redhat.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Acked-by: Joel Becker <Joel.Becker@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jan Kara <jack@ucw.cz> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10IB/ehca: Fix memleak on module unloadingAkinobu Mita
Percpu data is not freed on module unloading. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10IB/mthca: Work around gcc bug on sparc64David Howells
For some reason gcc-3.4.5 on sparc64 does: WARNING: "____ilog2_NaN" [drivers/infiniband/hw/mthca/ib_mthca.ko] undefined! Points to note: (1) The asm volatile flush/flushw are just markers for viewing what comes out in the assembly; removing them has no effect on the result. (2) Changing almost anything else in dwh__mthca_arbel_init_srq_context() or dwh__mthca_alloc_srq() causes the problem to go away. The compiler command line issued by the kernel build is: /opt/crosstool/gcc-3.4.5-glibc-2.3.6/sparc64-unknown-linux-gnu/bin/sparc64-unknown-linux-gnu-gcc -fno-strict-aliasing -fno-common -Os -m64 -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wa,--undeclared-regs -pg -fno-omit-frame-pointer -fno-optimize-sibling-calls -fasynchronous-unwind-tables -g -c -o drivers/infiniband/hw/mthca/.tmp_mthca_srq.o drivers/infiniband/hw/mthca/mthca_srq.c This can be reduced to this whilst still retaining the problem: /opt/crosstool/gcc-3.4.5-glibc-2.3.6/sparc64-unknown-linux-gnu/bin/sparc64-unknown-linux-gnu-gcc -m64 -c -o drivers/infiniband/hw/mthca/mthca_srq.o drivers/infiniband/hw/mthca/mthca_srq.c -Os Removing -Os or changing it to -O or -O0 thru -O6 gets rid of the problem. This patch to the kernel code fixes the problem: Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10IB/mthca: Use correct structure size in call to memset()Roland Dreier
When clearing the ib_ah_attr parameter in to_ib_ah_attr(), use sizeof *ib_ah_attr instead of sizeof *path. Pointed out by Jack Morgenstein <jackm@mellanox.co.il>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04IB/ehca: Remove obsolete prototypesHoang-Nam Nguyen
Remove prototypes for functions that don't exist. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04IB/ehca: Remove use of do_mmap()Hoang-Nam Nguyen
This patch removes do_mmap() from ehca: - Call remap_pfn_range() for hardware register block - Use vm_insert_page() to register memory allocated for completion queues and queue pairs - The actual mmap() call/trigger is now controlled by user space, ie. libehca Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-04IB: Return qp pointer as part of ib_wcMichael S. Tsirkin
struct ib_wc currently only includes the local QP number: this matches the IB spec, but seems mostly useless. The following patch replaces this with the pointer to qp itself, and updates all low level drivers and all users. This has the following advantages: - Ability to get a per-qp context through wc->qp->qp_context - Existing drivers already have the qp pointer ready in poll cq, so this change actually saves a tiny bit (extra memory read) on data path (for ehca it would actually be expensive to find the QP pointer when polling a CQ, but ehca does not support SRQ so we can leave wc->qp as NULL for ehca) - Users that need the QP number can still get it through wc->qp->qp_num Use case: In IPoIB connected mode code, I have a common CQ shared by multiple QPs. To track connection usage, I need a way to get at some per-QP context upon the completion, and I would like to avoid allocating context object per work request just to stick a QP pointer into it. With this code, I can just use wc->qp->qp_context. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 12:19:10 +0000