aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2006-08-03IB/uverbs: Avoid a crash on device hot removeJack Morgenstein
Wait until all users have closed their device context before allowing device unregistration to complete. This prevents a crash caused by referring to stale data structures. A better solution would be to have a way to revoke contexts rather than waiting for userspace to close the context, but that's a much bigger change that will have to wait. For now let's at least avoid the crash. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/ipoib: Remove broken link from Kconfig and documentationOr Gerlitz
Remove references to the IPoIB IETF working group as it has been closed. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/srp: Work around data corruption bug on Mellanox targetsIshai Rabinovitz
Data corruption has been seen with Mellanox SRP targets when FMRs create a memory region with I/O virtual address != 0. Add a workaround that disables FMR merging for Mellanox targets (OUI 0002c9). Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/srp: Fix crash in srp_reconnect_targetIshai Rabinovitz
Protect against srp_reset_device() clearing the req_queue while srp_reconnect_target() is in progress (note that state change at the top of srp_reconnect_target() is not sufficient for this since srp_reset_device() ignores the state). Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/cm: Fix error handling in ib_send_cm_reqSean Hefty
Report error code rather than success (0) on failure allocating timewait_info in ib_send_cm_req(). Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/mthca: Clean up mthca array index maskRoland Dreier
Define a constant MTHCA_ARRAY_MASK to replace repeated uses of (PAGE_SIZE / sizeof (void *) - 1) in mthca array code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-03IB/mthca: Fix mthca_array_clear() thinkoMichael S. Tsirkin
mthca_array_clear() does not clear the slot if the used count is positive. This leads to crashes in mthca_qp_event() since that uses mthca_array_get() to check that the qp is valid. Discovered by Ali Ayoub. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-02[NET] infiniband: Cleanup ib_addr module to use the neteventsTom Tucker
Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24IB/mthca: Initialize max_cmds before debug code prints itRoland Dreier
Read the max_cmds value from the response to the QUERY_FW command before printing out the value, so that the real value goes into the debug output. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24IB/ipoib: Fix packet loss after hardware address updateMichael S. Tsirkin
The neighbour ha field may get updated without destroying the neighbour. In this case, the ha field gets out of sync with the address handle stored in ipoib_neigh->ah, with the result that the ah field would point to an incorrect path, resulting in all packets being lost. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24IB/ipoib: Fix oops with ipoib_debug_mcast setOr Gerlitz
Need to set mcast->ah before debug code dereferences it. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24IB/mad: Validate MADs for spec complianceSean Hefty
Validate MADs sent by userspace clients for spec compliance with C13-18.1.1 (prevent duplicate requests and responses sent on the same port). Without this, RMPP transactions get aborted because of duplicate packets. This patch is similar to that provided by Jack Morgenstein. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24IB/ipath: ipath_skip_sge() can break if num_sge > 1Ralph Campbell
ipath_skip_sge() doesn't exactly duplicate the side effects of ipath_copy_sge() if num_sge > 1 since it doesn't decrement ss->num_sge. This could result in the sg_list being accessed out of bounds. Since ipath_skip_sge() is almost always called with num_sge == 1, the original "optimization" is almost never used. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24IB/ipath: Fix ib_ipath driver to work with SRPRalph Campbell
I am still working on a proposal to remove the phys_to_virt() calls in the ib_ipath driver. In the mean time, this patch allows SRP to work by fixing the R_Key check and conversion from IB address to kernel virtual address. It also returns the correct page size for FMRs. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24IB/ipath: Fix a data corruptionRalph Campbell
This patch fixes a problem where certain error packets are passed to the InfiniBand layer for processing even though the packet actually was received with an error. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-24IB/mthca: Fix SRQ limit event range checkDotan Barak
Mem-free HCAs always keep one spare SRQ WQE, so the SRQ limit cannot be set beyond srq->max - 1. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-23IB/uverbs: Fix lockdep warningsRoland Dreier
Lockdep warns because uverbs is trying to take uobj->mutex when it already holds that lock. This is because there are really multiple types of uobjs even though all of their locks are initialized in common code. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-23IB/uverbs: Fix unlocking in error pathsMichael S. Tsirkin
ib_uverbs_create_ah() and ib_uverbs_create_srq() did not release the PD's read lock in their error paths, which lead to deadlock when destroying the PD. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-07-14[PATCH] IB/core: use correct gfp_mask in sa_queryMichael S. Tsirkin
Avoid bogus out of memory errors: fix sa_query to actually pass gfp_mask supplied by the user to idr_pre_get. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: "Sean Hefty" <mshefty@ichips.intel.com> Acked-by: "Roland Dreier" <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] fmr pool: remove unnecessary pointer dereferenceMichael S. Tsirkin
ib_fmr_pool_map_phys gets the virtual address by pointer but never writes there, and users (e.g. srp) seem to assume this and ignore the value returned. This patch cleans up the API to get the VA by value, and updates all users. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] IB/cm: set private data length for reject messagesIra Weiny
Set private data length for reject messages to the correct size. Fix from openib svn r8483. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] srp: fix fmr error handlingVu Pham
srp_unmap_data assumes req->fmr is NULL if the request is not mapped, so we must clean it out in case of an error. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] IB/addr: gid structure alignment fixMichael S. Tsirkin
The device address contains unsigned character arrays, which contain raw GID addresses. The GIDs may not be naturally aligned, so do not cast them to structures or unions. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] IB/cm: drop REQ when out of memoryMichael S. Tsirkin
If a user of the IB CM returns -ENOMEM from their connection callback, simply drop the incoming REQ - do not attempt to send a reject. This should allow the sender to retry the request. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] IB/mthca: comment fixMichael S. Tsirkin
After recent changes, mthca_wq_init does not actually initialize the WQ as it used to - it simply resets all index fields to their initial values. So, let's rename it to mthca_wq_reset. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] IB/mthca: fix static rate returned by mthca_ah_queryJack Morgenstein
mthca_ah_query returs the static rate of the address handle in internal mthc format. fix it to use rate encoding from enum ib_rate, which is what users expect. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-04[PATCH] mthca: initialize send and receive queue locks separatelyZach Brown
mthca: initialize send and receive queue locks separately lockdep identifies a lock by the call site of its initialization. By initializing the send and receive queue locks in mthca_wq_init() we confuse lockdep. It warns that that the ordered acquiry of both locks in mthca_modify_qp() is recursive acquiry of one lock: ============================================= [ INFO: possible recursive locking detected ] --------------------------------------------- modprobe/1192 is trying to acquire lock: (&wq->lock){....}, at: [<f892b4db>] mthca_modify_qp+0x60/0xa7b [ib_mthca] but task is already holding lock: (&wq->lock){....}, at: [<f892b4ce>] mthca_modify_qp+0x53/0xa7b [ib_mthca] Initializing the locks separately in mthca_alloc_qp_common() stops the warning and will let lockdep enforce proper ordering on paths that acquire both locks. Signed-off-by: Zach Brown <zach.brown@oracle.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03Merge ../scsi-misc-2.6James Bottomley
Conflicts: drivers/scsi/nsp32.c drivers/scsi/pcmcia/nsp_cs.c Removal of randomness flag conflicts with SA_ -> IRQF_ global replacement. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-02[PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: namespace cleanup: replace ips with ipathBryan O'Sullivan
Remove ips namespace from infinipath drivers. This renames ips_common.h to ipath_common.h. Definitions, data structures, etc. that were not used by kernel modules have moved to user-only headers. All names including ips have been renamed to ipath. Some names have had an ipath prefix added. Signed-off-by: Christian Bell <christian.bell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: ignore receive queue size if SRQ is specifiedBryan O'Sullivan
The receive work queue size should be ignored if the QP is created to use a shared receive queue according to the IB spec. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: remove some #if 0 code related to lockable memoryBryan O'Sullivan
Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: fix a bug that results in addresses near 0 being written ↵Bryan O'Sullivan
via DMA We can't tell for sure if any packets are in the infinipath receive buffer when we shut down a chip port. Normally this is taken care of by orderly shutdown, but when processes are terminated, or sending process has a bug, we can continue to receive packets. So rather than writing zero to the address registers for the closing port, we point it at a dummy memory. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: read/write correct sizes through diag interfaceBryan O'Sullivan
We must increment uaddr by size we are reading or writing, since it's passed as a char *, not a pointer to the appropriate size. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: support more models of InfiniPath hardwareBryan O'Sullivan
We do a few more explicit checks for specific models, and now also support the old PathScale serial number style, or new QLogic style. This is backwards compatible with previous versions of software and hardware. That is, older software will see a plausible serial number and correct GUID when used with a new board, while newer software will correctly handle an older board. Signed-off-by: Mike Albaugh <mike.albaugh@qlogic.com> Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: drop the "stats" sysfs attribute groupBryan O'Sullivan
This attribute group made it into the original driver, but should not have. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: purge sps_lid and sps_mlid arraysBryan O'Sullivan
The two arrays only had space for 4 units. Also changed from ipath_set_sps_lid() to ipath_set_lid(); the sps was leftover. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: rC receive interrupt performance changesBryan O'Sullivan
This patch separates QP state used for sending and receiving RC packets so the processing in the receive interrupt handler can be done mostly without locks being held. ACK packets are now sent without requiring synchronization with the send tasklet. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: fixes to performance get counters for IB complianceBryan O'Sullivan
This patch fixes some problems uncovered during IB compliance testing to return the right values for error counters returned by the Performance Get Counters packet. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: check for valid LID and multicast LIDsBryan O'Sullivan
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: removed redundant statementsBryan O'Sullivan
The tail register read became redundant as the result of earlier receive interrupt bug fixes. Drop another unneeded register read. And another line that got duplicated. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: don't confuse the max message size with the MTUBryan O'Sullivan
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: disallow send of invalid packet sizes over UDBryan O'Sullivan
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: fix lost interrupts on HT-400Bryan O'Sullivan
Do an extra check to see if in-memory tail changed while processing packets, and if so, going back through the loop again (but only once per call to ipath_kreceive()). In practice, this seems to be enough to guarantee that if we crossed the clearing of an interrupt at start of ipath_intr with a scheduled tail register update, that we'll process the "extra" packet that lost the interrupt because we cleared it just as it was about to arrive. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: fixed bug 9776 for realBryan O'Sullivan
The problem was that I was updating the head register multiple times in the rcvhdrq processing loop, and setting the counter on each update. Since that meant that the tail register was ahead of head for all but the last update, we would get extra interrupts. The fix was to not write the counter value except on the last update. I also changed to update rcvhdrhead and rcvegrindexhead at most every 16 packets, if there were lots of packets in the queue (and of course, on the last packet, regardless). I also made some small cleanups while debugging this. With these changes, xeon/monty typically sees two openib packets per interrupt on sdp and ipoib, opteron/monty is about 1.25 pkts/intr. I'm seeing about 3800 Mbit/s monty/xeon, and 5000-5100 opteron/monty with netperf sdp. Netpipe doesn't show as good as that, peaking at about 4400 on opteron/monty sdp. Plain ipoib xeon is about 2100+ netperf, opteron 2900+, at 128KB Signed-off-by: olson@eng-12.pathscale.com Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: reduce overhead on receive interruptsBryan O'Sullivan
Also count the number of interrupts where that works (fastrcvint). On any interrupt where the port0 head and tail registers are not equal, just call the ipath_kreceive code without reading the interrupt status, thus saving the approximately 0.25usec processor stall waiting for the read to return. If any other interrupt bits are set, or head==tail, take the normal path, but that has been reordered to handle read ahead of pioavail. Also no longer call ipath_kreceive() from ipath_qcheck(), because that just seems to make things worse, and isn't really buying us anything, these days. Also no longer loop in ipath_kreceive(); better to not hold things off too long (I saw many cases where we would loop 4-8 times, and handle thousands (up to 3500) in a single call). Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: memory management cleanupsBryan O'Sullivan
Made in-memory rcvhdrq tail update be in dma_alloc'ed memory, not random user or special kernel (needed for ppc, also "just the right thing to do"). Some cleanups to make unexpected link transitions less likely to produce complaints about packet errors, and also to not leave SMA packets stuck and unable to go out. A few other random debug and comment cleanups. Always init rcvhdrq head/tail registers to 0, to avoid race conditions (should have been that way some time ago). Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: use vmalloc to allocate struct ipath_devdataBryan O'Sullivan
This is not a DMA target, so no need to use dma_alloc_coherent on it. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: use more appropriate gfp flagsBryan O'Sullivan
This helps us to survive better when memory is fragmented. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[PATCH] IB/ipath: enable freeze mode when shutting down deviceBryan O'Sullivan
Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Michael S. Tsirkin" <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>