aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2008-04-21IB/ipath: Correct capitalization "IntX" -> "INTx"Roland Dreier
Match what the PCI specification uses. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Remove tests of PCI_MSI in ipath_iba7220.cRoland Dreier
The PCI MSI interface is stubbed out properly so that all the functions just return failure if PCI_MSI=n, so there's no reason to have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Remove dependency on PCI_MSI || HT_IRQRoland Dreier
Before IBA7220 support was added, the ipath driver didn't support any hardware unless PCI_MSI and/or HT_IRQ was enabled. However, the IBA7220 can generate INTx interrupts, so it makes sense to allow the driver to be build even if PCI_MSI=n and HT_IRQ=n. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Build IBA7220 code unconditionallyRoland Dreier
The new IBA7220 code added a call to ipath_init_iba7220_funcs() that is compiled unconditionally, but only built the IBA7220 code if PCI_MSI is enabled. Fix this by building the IBA7220 file unconditonally. This fixes build breakage when PCI_MSI=n, HT_IRQ=y and INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>: drivers/built-in.o: In function `ipath_init_one': ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs' Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Remove reference to dev->class_dev ↵Roland Dreier
Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in build") inadvertently added core to set dev->class_dev.dev back into ib_ipath. This is completely redundant since commit 1912ffbb ("IB: Set class_dev->dev in core for nice device symlink"), which removed class_dev setting from low-level drivers, and also will break the build when class_dev is removed completely from struct ib_device. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21IB/ipath: Fix module parameter description for disable_smaPaul Bolle
Describe disable_sma parameter with its name rather than the internal ib_ipath_disable_sma variable name, so that the description shows up properly in modinfo. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21RDMA/nes: Remove unneeded function declarationsRoland Dreier
Remove redundant static declarations of functions that are defined before they are used in the source. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits) SCSI: convert struct class_device to struct device DRM: remove unused dev_class IB: rename "dev" to "srp_dev" in srp_host structure IB: convert struct class_device to struct device memstick: convert struct class_device to struct device driver core: replace remaining __FUNCTION__ occurrences sysfs: refill attribute buffer when reading from offset 0 PM: Remove destroy_suspended_device() Firmware: add iSCSI iBFT Support PM: Remove legacy PM (fix) Kobject: Replace list_for_each() with list_for_each_entry(). SYSFS: Explicitly include required header file slab.h. Driver core: make device_is_registered() work for class devices PM: Convert wakeup flag accessors to inline functions PM: Make wakeup flags available whenever CONFIG_PM is set PM: Fix misuse of wakeup flag accessors in serial core Driver core: Call device_pm_add() after bus_add_device() in device_add() PM: Handle device registrations during suspend/resume block: send disk "change" event for rescan_partitions() sysdev: detect multiple driver registrations ... Fixed trivial conflict in include/linux/memory.h due to semaphore header file change (made irrelevant by the change to mutex).
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19IB: rename "dev" to "srp_dev" in srp_host structureGreg Kroah-Hartman
This sets us up to be able to convert the srp_host to use a struct device instead of a class_device. Based on a original patch from Tony Jones, but split up into this piece by Greg. Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Reviewed-by: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19IB: convert struct class_device to struct deviceTony Jones
This converts the main ib_device to use struct device instead of struct class_device as class_device is going away. Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-18Convert asm/semaphore.h users to linux/semaphore.hMatthew Wilcox
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-16IB/iser: Don't change itt endiannessErez Zilber
The itt field in struct iscsi_data is not defined with any particular endianness. open-iscsi should use it as-is without byte-swapping it. This fixes sparse warnings coming from doing ntohl(hdr->itt). Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Update module version and release dateJack Morgenstein
The mlx4_ib driver is stable enough for production use, so bump the version number to 1.0 to indicate this. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IPoIB: Handle case when P_Key is deleted and re-added at same indexRoland Dreier
If a P_Key is deleted and then re-added at the same index, then IPoIB gets confused because __ipoib_ib_dev_flush() only checks whether the index is the same without checking whether the P_Key was present, so the interface is stopped when the P_Key is deleted, but the event when the P_Key is re-added gets ignored and the interface never gets restarted. Also, switch to using ib_find_pkey() instead of ib_find_cached_pkey() everywhere in IPoIB, since none of the places that look for P_Keys are in a fast path or in non-sleeping context, and in general we want to kill off the whole caching infrastructure eventually. This also fixes consistency problems caused because some IPoIB queries were cached and some were uncached during the window where the cache was not updated. Thanks to Venkata Subramonyam <vsubramo@cisco.com> for debugging this problem and testing this fix. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/iser: Release connection resources on RDMA_CM_EVENT_DEVICE_REMOVAL eventErez Zilber
When a RDMA_CM_EVENT_DEVICE_REMOVAL event is raised, iSER should release the connection resources. This is necessary when the IB HCA module is unloaded while open-iscsi is still running. Currently, iSER just BUG()s. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ehca: Support all ibv_devinfo values in query_device() and query_port()Stefan Roscher
Also, introduce a few inline helper functions to make the code more readable. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/nes: Free IRQ before killing taskletRoland Dreier
Move the free_irq() call in nes_remove() to before the tasklet_kill(); otherwise there is a window after tasklet_kill() where a new interrupt can be handled and reschedule the tasklet, leading to a use-after-free crash. Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mthca: Update module version and release dateJack Morgenstein
The ib_mthca driver has been stable for a while, so bump the version number to 1.0 to indicate this. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Update QP state if query QP succeedsDotan Barak
If the QP was moved to another state (such as SQE) by the hardware, then after this change the user won't have to set the IBV_QP_CUR_STATE mask in order to execute modify QP in order to recover from this state. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mthca: Update QP state if query QP succeedsDotan Barak
If the QP was moved to another state (such as SQE) by the hardware, then after this change the user won't have to set the IBV_QP_CUR_STATE mask in order to execute modify QP in order to recover from this state. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/amso1100: Add check for NULL reply_msg in c2_intr()Tom Tucker
Fix a place where we might dereference a NULL pointer; this fixes Coverity CID 1392. On inspection I also found a place where we could attempt to kmem_cache_free() a NULL pointer, so fix this too. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Add support for resizing CQsVladimir Sokolovsky
Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/mlx4: Add support for modifying CQ moderation parametersEli Cohen
Signed-off-by: Eli Cohen <eli@mellnaox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IPoIB: Support modifying IPoIB CQ event moderationEli Cohen
This can be used to tune at run time the parameters controlling the event (interrupt) generation rate and thus reduce the overhead incurred by handling interrupts resulting in better throughput. Since IPoIB uses a single CQ for both RX and TX, RX is chosen to dictate configuration for both RX and TX. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/core: Add support for modify CQEli Cohen
Add support for modifying CQ parameters for controlling event generation moderation. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IPoIB: Add basic ethtool supportEli Cohen
Just add the infrastructure so we can add functionality later. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16RDMA/amso1100: Add support for "send with invalidate" work requestsRoland Dreier
Handle IB_WR_SEND_WITH_INV work requests. This resurrects a patch sent long ago by Mikkel Hagen <mhagen@iol.unh.edu>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/core: Add support for "send with invalidate" work requestsRoland Dreier
Add a new IB_WR_SEND_WITH_INV send opcode that can be used to mark a "send with invalidate" work request as defined in the iWARP verbs and the InfiniBand base memory management extensions. Also put "imm_data" and a new "invalidate_rkey" member in a new "ex" union in struct ib_send_wr. The invalidate_rkey member can be used to pass in an R_Key/STag to be invalidated. Add this new union to struct ib_uverbs_send_wr. Add code to copy the invalidate_rkey field in ib_uverbs_post_send(). Fix up low-level drivers to deal with the change to struct ib_send_wr, and just remove the imm_data initialization from net/sunrpc/xprtrdma/, since that code never does any send with immediate operations. Also, move the existing IB_DEVICE_SEND_W_INV flag to a new bit, since the iWARP drivers currently in the tree set the bit. The amso1100 driver at least will silently fail to honor the IB_SEND_INVALIDATE bit if passed in as part of userspace send requests (since it does not implement kernel bypass work request queueing). Remove the flag from all existing drivers that set it until we know which ones are OK. The values chosen for the new flag is not consecutive to avoid clashing with flags defined in the XRC patches, which are not merged yet but which are already in use and are likely to be merged soon. This resurrects a patch sent long ago by Mikkel Hagen <mhagen@iol.unh.edu>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Update copyright dates for files changed in 2008Ralph Campbell
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: add calls to new 7220 code and enable in buildDave Olson
This patch adds the initialization calls into the new 7220 HCA files, changes the Makefile to compile and link the new files, and code to handle send DMA. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Misc changes to prepare for IB7220 introductionArthur Jones
The patch adds a number of minor changes to support newer HCAs: - New send buffer control bits - New error condition bits - Locking and initialization changes - More send buffers Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: User mode send DMAArthur Jones
A new file which allows the IBA7220 send DMA engine to be used from userland. The routines here are not linked in yet, that will happen in a follow-on patch... Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: User mode send DMA header fileArthur Jones
A new header file which allows the IBA7220 send DMA engine to be used from userland. The definitions here are not used yet, that will happen in a follow-on patch... Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Add code for IBA7220 send DMAJohn Gregor
The IBA7220 HCA has a new feature to DMA data to the on chip send buffers instead of or in addition to the host CPU doing the data transfer. This patch adds code to support the send DMA queue. Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Add IBA7220-specific SERDES initialization dataRalph Campbell
This patch adds binary data to initialize the IB SERDES. Signed-off-by: Michael Albaugh <Michael.Albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Support for SerDes portion of IBA7220Michael Albaugh
The control and initialization of the SerDes blocks of the IBA7220 is sufficiently complex to merit a separate file. Signed-off-by: Michael Albaugh <Michael.Albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: HCA-specific code to support IBA7220Ralph Campbell
This patch adds the HCA-specific code for the IBA7220 HCA. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Isolate 7220-specific contentMichael Albaugh
This patch adds a new ASIC-specific header file for the HCAs using the IBA7220. Signed-off-by: Michael Albaugh <Michael.Albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Header file changes to support IBA7220Ralph Campbell
This is part of a patch series to add support for a new HCA. This patch adds new fields to the header files. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Fix up error handlingRalph Campbell
This patch makes chip reset more robust and reduces lock contention between user and kernel TID register updates. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Fix check for no interrupts to reliably fallback to INTxDave Olson
Newer HCAs support MSI interrupts and also INTx interrupts. Fix the code so that INTx can be reliably enabled if MSI interrupts are not working. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Enable reduced PIO update for HCAs that support it.Dave Olson
Newer HCAs have a threshold counter to reduce the number of DMAs the chip makes to update the PIO buffer availability status bits. This patch enables the feature. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Set LID filtering for HCAs that support it.Dave Olson
Whenever the LID is set, notify the HCA specific code so that the appropriate HW registers can be updated. Also log the info on the console at low priority. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Add support for IBTA 1.2 HeartbeatDave Olson
This patch adds code to enable/disable the IBTA 1.2 heartbeat for testing if the HCA supports it. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Make link state transition code ignore (transient) link recoveryDave Olson
The hardware-based recovery doesn't need any intervention, and in a few cases we can get a bit confused about state and skip steps such as turning off the link state LED when we consider recovery to be "down". So ignore this transition, and either we recover in hardware, or we transition to down, and will handle it then. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Add support for 7220 receive queue changesRalph Campbell
Newer HCAs have a HW option to write a sequence number to each receive queue entry and avoid a separate DMA of the tail register to memory. This patch adds support for these changes. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Fix some white space and code style issuesRalph Campbell
This patch makes some white space changes and minor non-functional changes to more closely match the code in OFED-1.3. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-16IB/ipath: Allow old and new diagnostic packet formatsMichael Albaugh
This patch checks for old and new format writes to send a packet via the diagnostic interface. Signed-off-by: Michael Albaugh <Michael.Albaugh@Qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 10:11:22 +0000