aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2008-09-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop() RDMA/nes: Fix client side QP destroy IB/mlx4: Fix up fast register page list format mlx4_core: Set RAE and init mtt_sz field in FRMR MPT entries
2008-09-16Merge branches 'ipoib', 'mlx4' and 'nes' into for-linusRoland Dreier
2008-09-16IPoIB: Fix deadlock on RTNL between bcast join comp and ipoib_stop()Yossi Etigin
Taking rtnl_lock in ipoib_mcast_join_complete() causes a deadlock with ipoib_stop(). We avoid it by scheduling the piece of code that takes the lock on ipoib_workqueue instead of executing it directly. This works because we only flush the ipoib_workqueue with the RTNL not held. The deadlock happens because ipoib_stop() calls ipoib_ib_dev_down() which calls ipoib_mcast_dev_flush(), which calls ipoib_mcast_free(), which calls ipoib_mcast_leave(). The latter calls ib_sa_free_multicast(), and this waits until the multicast completion handler finishes. This handler is ipoib_mcast_join_complete(), which waits for the rtnl_lock(), which was already taken by ipoib_stop(). This bug was introduced in commit a77a57a1 ("IPoIB: Fix deadlock on RTNL in ipoib_stop()"). Signed-off-by: Yossi Etigin <yosefe@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-16RDMA/nes: Fix client side QP destroyFaisal Latif
Fix QP not being destroyed properly on the client, which leads to userspace programs hanging on exit. This is a missing chunk from the connection management rewrite in commit 6492cdf3 ("RDMA/nes: CM connection setup/teardown rework"). Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-09-15IB/mlx4: Fix up fast register page list formatVladimir Sokolovsky
Byte swap the addresses in the page list for fast register work requests to big endian to match what the HCA expectx. Also, the addresses must have the "present" bit set so that the HCA knows it can access them. Otherwise the HCA will fault the first time it accesses the memory region. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-27IB/mlx4: Actually return L_Key and R_Key for fast register MRsVladimir Sokolovsky
Initialize the L_Key and R_Key for memory regions returned from mlx4_ib_alloc_fast_reg_mr(). Otherwise callers just get garbage for the memory keys and can't do anything useful with these MRs. Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-19Merge branches 'ipath' and 'ipoib' into for-linusRoland Dreier
2008-08-19IPoIB: Fix deadlock on RTNL in ipoib_stop()Roland Dreier
Commit c8c2afe3 ("IPoIB: Use rtnl lock/unlock when changing device flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which is run from the ipoib_workqueue. However, ipoib_stop() (which is run inside rtnl_lock()) flushes this workqueue, which leads to a deadlock if the join task is pending. Fix this by simply not flushing the workqueue from ipoib_stop(). It turns out that we really don't care about workqueue tasks running during or after ipoib_stop(), as long as we make sure to flush the workqueue before unregistering a netdev. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1114>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-15IB/ipath: Fix incorrect check for max physical address in TIDDave Olson
The check for max physical address was incorrect, thus limiting the range of allowed physical addresses. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-15IB/ipath: Fix lost UD send work requestRalph Campbell
If a UD QP has some work requests queued to be sent by the DMA engine followed by a local loopback work request, we have to wait for the previous work requests to finish or the completion for the local loopback work request would be generated out of order. The problem was that the work request queue pointer was already updated so that the request would not be processed when the DMA queue drained. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12Merge branches 'ehca' and 'ipoib' into for-linusRoland Dreier
2008-08-12IB/ehca: Discard double CQE for one WRAlexander Schmidt
Under rare circumstances, the ehca hardware might erroneously generate two CQEs for the same WQE, which is not compliant to the IB spec and will cause unpredictable errors like memory being freed twice. To avoid this problem, the driver needs to detect the second CQE and discard it. For this purpose, introduce an array holding as many elements as the SQ of the QP, called sq_map. Each sq_map entry stores a "reported" flag for one WQE in the SQ. When a work request is posted to the SQ, the respective "reported" flag is set to zero. After the arrival of a CQE, the flag is set to 1, which allows to detect the occurence of a second CQE. The mapping between WQE / CQE and the corresponding sq_map element is implemented by replacing the lowest 16 Bits of the wr_id with the index in the queue map. The original 16 Bits are stored in the sq_map entry and are restored when the CQE is passed to the application. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Check idr_find() return valueAlexander Schmidt
The idr_find() function may fail when trying to get the QP that is associated with a CQE, e.g. when a QP has been destroyed between the generation of a CQE and the poll request for it. In consequence, the return value of idr_find() must be checked and the CQE must be discarded when the QP cannot be found. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Repoll CQ on invalid opcodeAlexander Schmidt
When the ehca driver detects an invalid opcode in a CQE, it currently passes the CQE to the application and returns with success. This patch changes the CQE handling to discard CQEs with invalid opcodes and to continue reading the next CQE from the CQ. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Rename goto label in ehca_poll_cq_one()Alexander Schmidt
Rename the "poll_cq_one_read_cqe" goto label to what it actually does, namely "repoll". Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-12IB/ehca: Update qp_state on cached modify_qp()Alexander Schmidt
Since the introduction of the port auto-detect mode for ehca, calls to modify_qp() may be cached in the device driver when the ports are not activated yet. When a modify_qp() call is cached, the qp state remains untouched until the port is activated, which will leave the qp in the reset state. In the reset state, however, it is not allowed to post SQ WQEs, which confuses applications like ib_mad. The solution for this problem is to immediately set the qp state as requested by modify_qp(), even when the call is cached. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-08IPoIB/cm: Use vmalloc() to allocate rx_ringsDavid J. Wilder
There are users that are running UDP applications that require a large receive queue size in order to get good performance. To prevent allocation failures for rx_rings when using non-SRQ mode and large recv_queue_size (1K or larger), use vmalloc() instead of kcalloc() to alocate rx_rings. Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULL IB/mlx4: Allow 4K messages for UD QPs mlx4_core: Add ethernet fields to CQE struct IB/ipath: Fix printk format warnings RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 device RDMA/cxgb3: Fix up MW access rights RDMA/cxgb3: Fix QP capabilities RDMA/cma: Remove padding arrays by using struct sockaddr_storage IB/ipath: Use unsigned long for irq flags IPoIB/cm: Set correct SG list in ipoib_cm_init_rx_wr()
2008-08-07Merge branches 'cma', 'cxgb3', 'ipath', 'ipoib', 'mad' and 'mlx4' into for-linusRoland Dreier
2008-08-07IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULLJulien Brunel
In case of error, the function ib_create_send_mad() returns an ERR pointer, but never returns a NULL pointer. So testing the return value for error should be done with IS_ERR, not by comparing with NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @correct_null_test@ expression x,E; statement S1, S2; @@ x = ib_create_send_mad(...) <... when != x = E if ( ( - x@p2 != NULL + ! IS_ERR ( x ) | - x@p2 == NULL + IS_ERR( x ) ) ) S1 else S2 ...> ? x = E; // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-07IB/mlx4: Allow 4K messages for UD QPsAlex Naslednikov
Current code limits the max message size to 2K for UD QPs, while MTU might be as big as 4K. This patch sets the maximum message size to 4K, which is needed for UD to work correctly on fabrics with a 4K MTU. Signed-off-by: Alex Naslednikov <xalex@mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-06mlx4_core: Add ethernet fields to CQE structYevgeny Petrilin
Add ethernet-related fields to struct mlx4_cqe so that the mlx4_en ethernet NIC driver can share the same definition. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04IB/ipath: Fix printk format warningsAlexander Beregalov
ipath_driver.c:1260: warning: format '%Lx' expects type 'long long unsigned int', but argument 6 has type 'long unsigned int' ipath_driver.c:1459: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_intr.c:358: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:358: warning: format '%Lu' expects type 'long long unsigned int', but argument 6 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 5 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1123: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1130: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1032: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1045: warning: format '%llX' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_iba7220.c:2506: warning: format '%Lu' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 deviceSteve Wise
Running 'ifconfig up' on the cxgb3 interface with iw_cxgb3 loaded causes a deadlock. The rtnl lock is already held in this path. The function fw_supports_fastreg() was introduced in 2.6.27 to conditionally set the IB_DEVICE_MEM_MGT_EXTENSIONS bit iff the firmware was at 7.0 or greater, and this function also acquires the rtnl lock and which thus causes a deadlock. Further, if iw_cxgb3 is loaded _after_ the nic interface is brought up, then the deadlock does not occur and therefore fw_supports_fastreg() does need to grab the rtnl lock in that path. It turns out this code is all useless anyway. The low level driver will NOT allow the open if the firmware isn't 7.0, so iw_cxgb3 can always set the MEM_MGT_EXTENSIONS bit. Simplify... Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cxgb3: Fix up MW access rightsSteve Wise
- MWs don't have local read/write permissions. - Set the MW_BIND enabled bit if a MR has MW_BIND access. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cxgb3: Fix QP capabilitiesSteve Wise
- Set the stag0 and fastreg capability bits only for kernel qps. - QP_PRIV flag is no longer used, so don't set it. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04RDMA/cma: Remove padding arrays by using struct sockaddr_storageRoland Dreier
There are a few places where the RDMA CM code handles IPv6 by doing struct sockaddr addr; u8 pad[sizeof(struct sockaddr_in6) - sizeof(struct sockaddr)]; This is fragile and ugly; handle this in a better way with just struct sockaddr_storage addr; [ Also roll in patch from Aleksey Senin <alekseys@voltaire.com> to switch to struct sockaddr_storage and get rid of padding arrays in struct rdma_addr. ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-01Remove newline from the description of module parametersNiels de Vos
Some module parameters with only one line have the '\n' at the end of the description. This is not needed nor wanted as after the description the type (i.e. int) is followed by a newline. Some modules contain a multi-line description, these are not affected by this patch. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-30IB/ipath: Use unsigned long for irq flagsVegard Nossum
A few functions in the ipath driver incorrectly use unsigned int to hold irq flags for spin_lock_irqsave(). This patch was generated using the Coccinelle framework with the following semantic patch: The semantic patch I used was this: @@ expression lock; identifier flags; expression subclass; @@ - unsigned int flags; + unsigned long flags; ... <+... ( spin_lock_irqsave(lock, flags) | _spin_lock_irqsave(lock) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | read_lock_irqsave(lock, flags) | _read_lock_irqsave(lock) | read_unlock_irqrestore(lock, flags) | _read_unlock_irqrestore(lock, flags) | write_lock_irqsave(lock, flags) | _write_lock_irqsave(lock) | write_unlock_irqrestore(lock, flags) | _write_unlock_irqrestore(lock, flags) | spin_lock_irqsave_nested(lock, flags, subclass) | _spin_lock_irqsave_nested(lock, subclass) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | _raw_spin_lock_flags(lock, flags) | __raw_spin_lock_flags(lock, flags) ) ...+> Cc: Ralph Campbell <ralph.campbell@qlogic.com> Cc: Julia Lawall <julia@diku.dk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-30IPoIB/cm: Set correct SG list in ipoib_cm_init_rx_wr()Roland Dreier
wr->sg_list should be set to the sge pointer passed in, not priv->cm.rx_sge. Reported-by: Hoang-Nam Nguyen <HNGUYEN@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver files mlx4_core: Add VLAN tag field to WQE control segment struct RDMA/nes: CM connection setup/teardown rework IPoIB: Correct help text for INFINIBAND_IPOIB_DEBUG IPoIB/cm: Connected mode is no longer EXPERIMENTAL RDMA/ucm: BKL is not needed for ib_ucm_open() RDMA/ucma: BKL is not needed for ucma_open()
2008-07-26Merge branches 'bkl-removal', 'ipoib', 'mlx4' and 'nes' into for-linusRoland Dreier
2008-07-26dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25mlx4: Update/add Mellanox Technologies copyright lines to mlx4 driver filesJack Morgenstein
Update existing Mellanox copyright lines to 2008, and add such lines to files where they are missing. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24RDMA/nes: CM connection setup/teardown reworkFaisal Latif
Major rework of CM connection setup/teardown. We had a number of issues with MPI applications not starting/terminating properly over time. With these changes we were able to run longer on larger clusters. * Remove memory allocation from nes_connect() and nes_cm_connect(). * Fix mini_cm_dec_refcnt_listen() when destroying listener. * Remove unnecessary code from schedule_nes_timer() and nes_cm_timer_tick(). * Functionalize mini_cm_recv_pkt() and process_packet(). * Clean up cm_node->ref_count usage. * Reuse skbs if available. Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24IPoIB: Correct help text for INFINIBAND_IPOIB_DEBUGRoland Dreier
The help text for INFINIBAND_IPOIB_DEBUG refers to "ipoib_debugfs," which no longer exists. Correct this to talk about the files under debugfs that are really created. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24IPoIB/cm: Connected mode is no longer EXPERIMENTALRoland Dreier
Connected mode is now tested and used by lots of people. No need to hide it under CONFIG_EXPERIMENTAL. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24RDMA/ucm: BKL is not needed for ib_ucm_open()Roland Dreier
Remove explicit cycle_kernel_lock() call and document why the code is safe. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24RDMA/ucma: BKL is not needed for ucma_open()Roland Dreier
Remove explicit lock_kernel() calls and document why the code is safe. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: MAINTAINERS: Remove Glenn Streiff from NetEffect entry mlx4_core: Improve error message when not enough UAR pages are available IB/mlx4: Add support for memory management extensions and local DMA L_Key IB/mthca: Keep free count for MTT buddy allocator mlx4_core: Keep free count for MTT buddy allocator mlx4_code: Add missing FW status return code IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg mlx4_core: Add module parameter to enable QoS support RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes IPoIB: Include err code in trace message for ib_sa_path_rec_get() failures IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one() IB/ehca: Release mutex in error path of alloc_small_queue_page() IB/ehca: Use default value for Local CA ACK Delay if FW returns 0 IB/ehca: Filter PATH_MIG events if QP was never armed IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event
2008-07-24Merge branches 'bkl-removal', 'cma', 'ehca', 'for-2.6.27', 'mlx4', 'mthca' ↵Roland Dreier
and 'nes' into for-linus
2008-07-23Merge branch 'cpus4096-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) NR_CPUS: Replace NR_CPUS in speedstep-centrino.c cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP NR_CPUS: Replace NR_CPUS in cpufreq userspace routines NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target cpumask: Provide a generic set of CPUMASK_ALLOC macros cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr Revert "cpumask: introduce new APIs" cpumask: make for_each_cpu_mask a bit smaller net: Pass reference to cpumask variable in net/sunrpc/svc.c ... Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
2008-07-23IB/mlx4: Add support for memory management extensions and local DMA L_KeyRoland Dreier
Add support for the following operations to mlx4 when device firmware supports them: - Send with invalidate and local invalidate send queue work requests; - Allocate/free fast register MRs; - Allocate/free fast register MR page lists; - Fast register MR send queue work requests; - Local DMA L_Key. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22IB/mthca: Keep free count for MTT buddy allocatorRoland Dreier
MTT entries are allocated with a buddy allocator, which just keeps bitmaps for each level of the buddy table. However, all free space starts out at the highest order, and small allocations start scanning from the lowest order. When the lowest order tables have no free space, this can lead to scanning potentially millions of bits before finding a free entry at a higher order. We can avoid this by just keeping a count of how many free entries each order has, and skipping the bitmap scan when an order is completely empty. This provides a nice performance boost for a negligible increase in memory usage. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_segRoland Dreier
Make the struct name consistent with other WQE segment struct types defined in <linux/mlx4/qp.h>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributesDotan Barak
Remove IB_ACCESS_LOCAL_WRITE from qp.qp_access_flags because this attribute is only used to set remote permissions. Signed-off-by: Dotan Barak <dotanba@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22IPoIB: Include err code in trace message for ib_sa_path_rec_get() failuresOr Gerlitz
Print the return code of ib_sa_path_rec_get() if it fails to help debug errors. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-22IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one()Ralph Campbell
If update_sm_ah() fails, it leaves the port's sm_ah as NULL. Then if the device or module is removed, ib_sa_remove_one() will dereference a NULL pointer when it calls kref_put(). Fix this by testing if sm_ah is NULL before dropping the reference. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>