aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2007-09-23IB/mlx4: Fix data corruption triggered by wrong headroom marking orderJack Morgenstein
This is an addendum to commit 0e6e7416 ("IB/mlx4: Handle new FW requirement for send request prefetching"). We also need to handle prefetch marking properly for S/G segments, or else the HCA may end up processing S/G segments that are not fully written and end up sending the wrong data. This can actually cause data corruption in practice, especially on systems with relatively slow CPUs (where the HCA is more likely to prefetch while the CPU is in the middle of writing a work request into memory). We write S/G segments in reverse order into the WQE, in order to guarantee that the first dword of all cachelines containing S/G segments is written last (overwriting the headroom invalidation pattern). The entire cacheline will thus contain valid data when the invalidation pattern is overwritten. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: SRQ fixes to enable IPoIB CM IB/ehca: Fix Small QP regressions
2007-08-31IB/ehca: SRQ fixes to enable IPoIB CMJoachim Fenkes
Fix ehca SRQ support so that IPoIB connected mode works: - Report max_srq > 0 if SRQ is supported - Report "last wqe reached" asynchronous event when base QP dies; this is required by the IB spec and IPoIB CM relies on receiving it when cleaning up. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-31IB/ehca: Fix Small QP regressionsStefan Roscher
The new Small QP code had a few bugs that would also make it trigger for non-Small QPs. Fix them. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-31cxgb3 - Fix dev->priv usageDivy Le Ray
cxgb3 used netdev_priv() and dev->priv for different purposes. In 2.6.23, netdev_priv() == dev->priv, cxgb3 needs a fix. This patch is a partial backport of Dave Miller's changes in the net-2.6.24 git branch. Without this fix, cxgb3 crashes on 2.6.23. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15IB/mlx4: Incorrect semicolon after if statementIlpo Järvinen
A stray semicolon makes us inadvertently ignore the value of err. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-07IPoIB: Fix leak in ipoib_transport_dev_init() error pathJack Morgenstein
ipoib_transport_dev_init() calls ipoib_cm_dev_init(), so it needs to call ipoib_cm_dev_cleanup() to unwind that on the error path. Found by Dotan Barak of Mellanox. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mlx4: Fix opcode returned in RDMA read completionVu Pham
Current code has a cut-and-paste error and returns IB_WC_SEND when it should return IB_WC_RDMA_READ. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/srp: Add OUI for new Cisco targetsRaghava Kondapalli
New Cisco IB SRP targets use the Cisco OUI 00-1b-0d but still need the Topspin workarounds. Add this OUI to srp_target_is_topspin(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/srp: Wrap OUI checking for workarounds in helper functionsRoland Dreier
Wrap the checking for Mellanox and Topspin OUIs to decide whether to use a workaround into helper functions. This will make it cleaner to add a new OUI to check (as we need to do now that some targets with a Cisco OUI still need the Topspin workarounds). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03RDMA/cxgb3: Always call low level send function via cxgb3_ofld_send()Steve Wise
This avoids deadlocks. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB: Move the macro IB_UMEM_MAX_PAGE_CHUNK() to umem.cDotan Barak
After moving the definition of struct ib_umem_chunk from ib_verbs.h to ib_umem.h there isn't any reason for the macro IB_UMEM_MAX_PAGE_CHUNK to stay in ib_verbs.h. Move the macro to umem.c, the only place where it is used. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: Fix address handle leak in mad_rmppSean Hefty
The address handle associated with dual-sided RMPP direction switch ACKs is never destroyed. Free the AH for ACKs which fall into this category. Problem was reported by Dotan Barak <dotanb@dev.mellanox.co.il>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: agent_send_response() should be voidHal Rosenstock
Nothing looks at the return value of agent_send_response(), so there's no point in returning anything. Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: Fix memory leak in switch handling in ib_mad_recv_done_handler()Hal Rosenstock
If agent_send_response() returns an error, we shouldn't do anything differently than if it succeeds; setting response to NULL just means that the response buffer gets leaked. Signed-off-by: Suresh Shelvapille <suri@baymicrosystems.com> Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: Fix error path if response alloc fails in ib_mad_recv_done_handler()Hal Rosenstock
If ib_mad_recv_done_handler() fails to allocate response, then it just printed a warning and continued, which leads to an oops if the MAD is being handled for a switch device, because the switch code uses response without checking for NULL. Fix this by bailing out of the function if the allocation fails. Signed-off-by: Suresh Shelvapille <suri@baymicrosystems.com> Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/sa: Don't need to check for default P_Key twiceRoland Dreier
Now that ib_find_pkey() ignores the membership bit of P_Keys, there's no need for ib_sa to look for both 0x7fff and 0xffff in a port's P_Key table. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/core: Ignore membership bit in ib_find_pkey()Moni Shoua
ib_find_pkey() is used as a replacement for ib_find_cached_pkey(), and the original function ignored the membership bit when searching for a P_Key, so ib_find_pkey() should ignore the bit too. In particular, IPoIB turns on the P_Key membership bit of limited membership P_Keys when creating a child interface and looks for the full membership P_key. This broke if a port was a partial member of a partition when IPoIB switched from ib_find_cached_pkey() to ib_find_pkey(), and this change fixes things again. Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-31in-string typos of "error"Eddy L O Jansson
One patch for two trivial typos of 'error' with three R's, appearing in message strings. There's a bunch more of the same in comments, not dealt with here. Signed-off-by: Eddy L O Jansson <eddy@klopper.net> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: Workaround problem of errormask register being overwritten IB/ipath: Fix some issues with buffer cancel and sendctrl register update IB/ipath: Use faster put_tid_2 routine after initialization IB/ipath: Remove unsafe fastrcvint code from interrupt handler IB/ehca: Move extern declarations from .c files to .h files IB/mlx4: Whitespace fix IB/ehca: Fix include order to better match kernel style mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structure
2007-07-30IB/ipath: Workaround problem of errormask register being overwrittenDave Olson
On some system hardware, we are seeing moderately common cases of the chip errormask register being overwritten due to a chip bug in iba6120 that is triggered by a vendor-specific PCIe broadcast message. This patch merely checks periodically, and corrects it if needed (the overwrite can cause us to not get error and hardware error interrupts). Also, make dd->ipath_errormask the one, true canonical source for kr_errormask, and remove references to ipath_ignorederrs as it is currently unused. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30IB/ipath: Fix some issues with buffer cancel and sendctrl register updateDave Olson
There was confused use of INFINIPATH_S_PIOBUFAVAILUPD (value) and IPATH_S_PIOBUFAVAILUPD (bit position). Also, some callers of ipath_cancel_sends() need kr_sendctrl restored, and some want to do it later. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30IB/ipath: Use faster put_tid_2 routine after initializationDave Olson
At one time the ipath_minrev field was initialized prior to the ipath_init_iba6120_funcs call, but that is no longer the case, so the slower put_tid routine was always being used. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-30IB/ipath: Remove unsafe fastrcvint code from interrupt handlerDave Olson
The fastrcvint code's purpose was to avoid reading the interrupt status if kernel packets were in the receive queue (to reduce overhead). Because intstatus was not read, we could miss the error interrupt bit indicating freeze mode, since it only delivers a single interrupt, even if still pending after intclear is written. This patch removes that unsafe optimization. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-29Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (28 commits) [SCSI] mpt fusion: Changes in mptctl.c for logging support [SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support [SCSI] mpt fusion: Changes in mptscsih.c for logging support [SCSI] mpt fusion: Changes in mptbase.c for logging support [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events() [SCSI] bsg: Fix build for CONFIG_BLOCK=n [SCSI] aacraid: fix Sunrise Lake reset handling [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking [SCSI] add easyRAID to the no report luns blacklist [SCSI] advansys: lindent and other large, uninteresting changes [SCSI] aic79xx, aic7xxx: Fix incorrect width setting [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes [SCSI] aacraid: draw line in sand, sundry cleanup and version update [SCSI] iscsi_tcp: Turn off bounce buffers [SCSI] libiscsi: fix cmd seqeunce number checking [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template [SCSI] libiscsi: make sure session is not blocked when removing host [SCSI] libsas: Remove PCI dependencies [SCSI] simscsi: convert to use the data buffer accessors ...
2007-07-29Remove fs.h from mm.hAlexey Dobriyan
Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-28IB/ehca: Move extern declarations from .c files to .h filesHoang-Nam Nguyen
Make sure declarations stay in sync with definitions by keeping all extern declarations in common .h files. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-28IB/mlx4: Whitespace fixRoland Dreier
Remove extra dumb-looking blank line that snuck in somehow. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-28IB/ehca: Fix include order to better match kernel styleHoang-Nam Nguyen
Include <rdma/...> headers after <asm/...> headers. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-28RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structureTom Tucker
Fix a crash if the driver has to wait for a QP reference to be dropped when destroying the QP. Signed-off-by: Ethan Burns <eaburns@iol.unh.edu> Acked-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-27[SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host templateMike Christie
This prevents the iscsi modules from being unloaded while there are active mounts from an iscsi target. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20IB/ehca: Support small QP queuesStefan Roscher
eHCA2 supports QP queues that can be as small as 512 bytes. This greatly reduces memory overhead for consumers that use lots of QPs with small queues (e.g. RDMA-only QPs). Apart from dealing with firmware, this code needs to manage bite-sized chunks of kernel pages, making sure that no kernel page is shared between different protection domains. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
2007-07-20IB/ehca: Make internal_create/destroy_qp() staticJoachim Fenkes
They're only used in ehca_qp.c, so make them static to that file. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/ehca: Move ehca2ib_return_code() out of lineHoang-Nam Nguyen
ehca2ib_return_code() is not used in any fast path, and making it non-inline saves ~1.5K of code. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/ehca: Generate async event when SRQ limit reachedHoang-Nam Nguyen
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/ehca: Support large page MRsHoang-Nam Nguyen
Add support for MR pages larger than 4K on eHCA2. This reduces firmware memory consumption. If enabled via the mr_largepage module parameter, the MR page size will be determined based on the MR length and the hardware capabilities -- if the MR is >= 16M, 16M pages are used, for example. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/mlx4: Fix error path in create_qp_common()Roland Dreier
The error handling code at err_wrid in create_qp_common() does not handle a userspace QP attached to an SRQ correctly, since it ends up in the else clause of the if statement. This means it tries to kfree() the uninitialized qp->sq.wrid and qp->rq.wrid pointers. Fix this so we only free the wrid arrays for kernel QPs. Pointed out by Michael S. Tsirkin <mst@dev.mellanox.co.il>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/mthca: Change command token on timeoutMichael S. Tsirkin
The FW command token is currently only updated on a command completion event. This means that on command timeout, the same token will be reused for new command, which results in a mess if the timed out command *does* eventually complete. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/ipath: Remove ipath_layer dead codeArthur Jones
The ipath_layer.[ch] code was an attempt to provide a single interface for the ipath verbs and ipath_ether code to use. As verbs functionality increased, the layer's functionality became insufficient and the verbs code broke away to interface directly to the driver. The failed attempt to get ipath_ether upstream was the final nail in the coffin and now it sits quietly in a dark kernel.org corner waiting for someone to notice the smell and send it along to it's final resting place. Roland Dreier was that someone -- this patch expands on his work... Signed-off-by: Arthur Jones <arthur.jones@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20IB/mlx4: Fix leaks in __mlx4_ib_modify_qpFlorin Malita
Temporarily allocated struct mlx4_qp_context *context is leaked by several error paths. The patch takes advantage of the return value 'err' being preinitialized to -EINVAL. Spotted by Coverity (CID 1768). Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18IB/mthca: Simplify use of size0 in work request postingRoland Dreier
Current code sets size0 to 0 at the start of work request posting functions and then handles size0 == 0 specially within the loop over work requests. Change this so size0 is set along with f0 the first time through the loop (when nreq == 0). This makes the code easier to understand by making it clearer that f0 and size0 are always initialized if nreq != 0 without having to know that size0 == 0 implies nreq == 0. Also annotate size0 with uninitialized_var() so that this doesn't introduce a new compiler warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-18IB/mthca: Factor out setting WQE UD segment entriesRoland Dreier
Factor code to set UD entries out of the work request posting functions into inline functions set_tavor_ud_seg() and set_arbel_ud_seg(). This doesn't change the generated code in any significant way, and makes the source easier on the eyes. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-18IB/mthca: Factor out setting WQE remote address and atomic segment entriesRoland Dreier
Factor code to set remote address and atomic segment entries out of the work request posting functions into inline functions set_raddr_seg() and set_atomic_seg(). This doesn't change the generated code in any significant way, and makes the source easier on the eyes. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-18IB/mlx4: Factor out setting other WQE segmentsRoland Dreier
Factor code to set remote address, atomic and datagram segments out of mlx4_ib_post_send() into small helper functions. This doesn't change the generated code in any significant way, and makes the source easier on the eyes. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-18IB/mlx4: Factor out setting WQE data segment entriesRoland Dreier
Factor code to set data segment entries out of mlx4_ib_post_send() into set_data_seg(). This cleans up the code and lets the compiler do a better job -- on x86_64: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-16 (-16) function old new delta mlx4_ib_post_send 1598 1582 -16 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-18IB/mthca: Factor out setting WQE data segment entriesRoland Dreier
Factor code to set data segment entries out of the work request posting functions into inline functions mthca_set_data_seg() and mthca_set_data_seg_inval(). This makes the code more readable and also allows the compiler to do a better job -- on x86_64: add/remove: 0/0 grow/shrink: 0/6 up/down: 0/-69 (-69) function old new delta mthca_arbel_post_srq_recv 373 369 -4 mthca_arbel_post_receive 570 562 -8 mthca_tavor_post_srq_recv 520 508 -12 mthca_tavor_post_send 1344 1330 -14 mthca_arbel_post_send 1481 1467 -14 mthca_tavor_post_receive 792 775 -17 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17IB/mlx4: Return receive queue sizes for userspace QPs from query QPRoland Dreier
Return the receive queue sizes for both userspace QPs and kernel Qps (not just kernel QPs) from mlx4_ib_query_qp(). Also zero the send queue sizes for userspace QPs to avoid a possible information leak, and set the max_inline_data for kernel QPs to 0 since inline sends are not supported for kernel QPs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17RDMA/cma: Remove local write permission from QP access flagsDotan Barak
Local write permission makes no sense as part of the QP access flags, since the access flags only control what the remote end of the connection is allowed to do. Remove the code in the RDMA CM that initializes qp_access_flags with IB_ACCESS_LOCAL_WRITE. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Acked-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 11:44:39 +0000