aboutsummaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2006-09-28IB/ipath: Support new PCIE device, QLE7142Bryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Set CPU affinity earlyBryan O'Sullivan
This change moves around port assignment so that it happens before any memory is allocated. This allows memory to be allocated on an appropriate CPU, which improves performance for users of /dev/ipath. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Fix EEPROM read when driver is compiled with -OsBryan O'Sullivan
The EEPROM is read via programmable I/O pins. When the driver is compiled -Os, the CPU can speculatively read the I/O value before it is valid. This patch fixes the problem. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Fix and recover TXE piobuf and PBC parity errorsBryan O'Sullivan
We can sometimes trigger parity errors due to processor speculative reads to our write-combined memory (mostly seen on Woodcrest). Add a stats counter for these. Factored out the sendbuffererror buffer cancellation code so it can be used in the new handling; suppress likely subsequent error messages if within two jiffies of the cancellation. Also restore 2 dropped TXE lines on hwe_bitsextant noticed while debugging. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Change HT CRC message to indicate how to resolve problemBryan O'Sullivan
The system must be powercycled to clear a HT CRC error; reloading the driver is not enough. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Clean up module exit codeBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Call mtrr_del with correct argumentsBryan O'Sullivan
We were passing 0 for base and length, which worked on older kernels, but it doesn't seem to any longer. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Flush RWQEs if access error or invalid error seenBryan O'Sullivan
If the receiver goes into the error state, we need to flush the posted receive WQEs. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Improved support for PowerPCBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Drop unnecessary "(void *)" castsBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Support multiple simultaneous devices of different typesBryan O'Sullivan
Prior to this change, the driver was not able to support a HT and PCIE card simultaneously present in the same machine. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Fix mismatch in shifts and masks for printing debug infoBryan O'Sullivan
Fixed mismatch in linkstate/trainingstate shifts and masks in the IPATH_IBSTATE_MASK macro. It kept some linktrainingstates from being printed correctly in debug; no functionality issue unless I misread the code. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Fix compiler warnings and errors on non-x86_64 systemsBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Print more informative parity error messagesBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Ensure that PD of MR matches PD of QP checking the RkeyBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: RC and UC should validate SLID and DLIDBryan O'Sullivan
This is required for IB conformance (spec ch. 9.6.1.5). Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Only allow complete writes to flashBryan O'Sullivan
Don't allow a write to the eeprom from ipathfs unless the write is exactly 128 bytes and starts at offset 0. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Count SRQs properlyBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Lock and count allocated CQs properlyBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Clean up handling of GUID 0Bryan O'Sullivan
Respond with an error to the SM if our GUID is 0, and don't allow the user to set our GUID to 0. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Unregister from IB core earlyBryan O'Sullivan
This gives upper-level protocols a chance to unregister while the device is still usable. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Support revision 2 InfiniPath PCIE devicesBryan O'Sullivan
This also entailed a little GPIO-interrupt general cleanup. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Driver support for userspace sharing of HW contextsBryan O'Sullivan
This allows multiple userspace processes to share a single hardware context in a master/slave arrangement. It is backwards binary compatible with existing userspace. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Fix memory leak if allocation failsBryan O'Sullivan
If the second allocation failed, the first structure allocated in this routine was not freed. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/ipath: Limit # of packets sent without an ACK receivedBryan O'Sullivan
The sender requests an ACK every 1/2 MB to avoid retransmit timeouts that were causing MVAPICH mod_bw to fail after a predictable number of sends. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/iser: Fix the description of iSER in KconfigErez Zilber
Fix the description of iSER in Kconfig. It is not accurate. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/iser: DMA unmap unaligned for RDMA data before touching itErez Zilber
iSER uses the DMA mapping api to map the page holding the SCSI command data to the HCA DMA address space. When the command data is not aligned for RDMA, the data is copied to/from an allocated buffer which in turn is used for executing this command. The pages associated with the command must be unmapped before being touched. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28IB/iser: Have iSER data transaction object point to iSER connErez Zilber
iSER uses a data transaction object (struct iser_dto) as part of its IB data descriptors (struct iser_desc) management. It also uses a hierarchy of connection structures pointing to each other. A DTO may exist even after the iscsi_iser connection pointed by it is destroyed (eg one that is bound to a post receive buffer which was flushed by the IB HW). Hence DTOs need point to the lowest connection, which is struct iser_conn. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28RDMA/amso1100: Fix memory leak in c2_reg_phys_mr()Roland Dreier
If the allocation of mr fails, then c2_reg_phys_mr() leaks the page_list array it allocated earlier. This was Coverity CID #1413. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28RDMA/amso1100: Fix error path in c2_llp_accept()Eric Sesterhenn
Another NULL dereference spotted by the Coverity checker (cid #1395): In case we can't alloc the vq_req, we goto bail1, where we call vq_req_free(c2dev, vq_req); which then dereferences vq_req. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Acked-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-27RDMA/amso1100: Fix compile warningsRoland Dreier
Make sure all 64-bit quantities are cast to unsigned long long when printed with "%ll" printk formats. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-27[PATCH] inode-diet: Eliminate i_blksize from the inode structureTheodore Ts'o
This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] inode_diet: Replace inode.u.generic_ip with inode.i_privateTheodore Ts'o
The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Judith Lebzelter <judith@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] Really ignore kmem_cache_destroy return valueAlexey Dobriyan
* Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26MSI: Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HTBrice Goglin
0x08 is the HT capability, while PCI_CAP_ID_HT_IRQCONF would be the subtype 0x80 that mpic_scan_ht_pic() uses. Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HT. And by the way, use it in the ipath driver instead of defining its own HT_CAPABILITY_ID. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-23Merge mulgrave-w:git/linux-2.6James Bottomley
Conflicts: include/linux/blkdev.h Trivial merge to incorporate tag prototypes.
2006-09-23Merge mulgrave-w:git/scsi-misc-2.6James Bottomley
Conflicts: drivers/scsi/iscsi_tcp.c drivers/scsi/iscsi_tcp.h Pretty horrible merge between crypto hash consolidation and crypto_digest_...->crypto_hash_... conversion Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23[PATCH] missing includes from infiniband mergeAl Viro
indirect chains of includes are arch-specific and can't be relied upon... (hell, even attempt to build it for itanic would trigger vmalloc.h ones; err.h triggers on e.g. alpha). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-22IB: Fix typo in kerneldoc for ib_set_client_data()Krishna Kumar
Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IPoIB: Add some likely/unlikely annotations in hot pathEli Cohen
Signed-off-by: Eli Cohen <eli@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IPoIB: Remove unused include of vmalloc.hDotan Barak
IPoIB doesn't use anything from <linux/vmalloc.h>, so don't include it. Signed-off-by: Dotan Barak <dotanb@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IPoIB: Rejoin all multicast groups after a port eventEli Cohen
When ipoib_ib_dev_flush() is called because of a port event, the driver needs to rejoin all multicast groups, since the flush will call ipoib_mcast_dev_flush() (via ipoib_ib_dev_down()). Otherwise no (non-broadcast) multicast groups will be rejoined until the networking core calls ->set_multicast_list again, and so multicast reception will be broken for potentially a long time. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IPoIB: Create MCGs with all attributes required by RFCRoland Dreier
RFC 4391 ("Transmission of IP over InfiniBand (IPoIB)") says: If the IB multicast group does not already exist, one must be created first with the IPoIB link MTU. The MGID MUST use the same P_Key, Q_Key, SL, MTU, and HopLimit as those used in the broadcast-GID. The rest of attributes SHOULD follow the values used in the broadcast-GID as well. However, the current IPoIB driver is only setting the attributes required by the InfiniBand spec to create a multicast group, so in particular the MTU and HopLimit are not being set. Add these attributes when creating MCGs, and also set the Rate attribute, since IPoIB pays attention to that attribute as well. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/iser: INFINIBAND_ISER depends on INETRoland Dreier
iSER won't build without CONFIG_INET enabled, so make Kconfig reflect that. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Simplify calls to mthca_cq_clean()Roland Dreier
If a QP has separate send and receive CQs, then the send CQ will never have receive completions from that QP in it. So when cleaning the send CQ, there's no need to pass in an SRQ pointer, even if the QP is attached to an SRQ. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/mthca: Recover from catastrophic errorsJack Morgenstein
Trigger device remove and then add when a catastrophic error is detected in hardware. This, in turn, will cause a device reset, which we hope will recover from the catastrophic condition. Since this might interefere with debugging the root cause, add a module option to suppress this behaviour. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/cm: Do not track remote QPN in timewait stateMichael S. Tsirkin
Do not track remote QPN in TimeWait state, since QP is not connected. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/sa: Require SA registrationMichael S. Tsirkin
Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IPoIB: Refactor completion handlingRoland Dreier
Split up ipoib_ib_handle_wc() into ipoib_ib_handle_rx_wc() and ipoib_ib_handle_tx_wc() to make the code easier to read. This will also help implement NAPI in the future. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-22IB/iser: Do not use FMR for a single dma entry sgErez Zilber
Fast Memory Registration (fmr) is used to register for rdma an sg whose elements are not linearly sequential after dma mapping. The IB verbs layer provides an "all dma memory MR (memory region)" which can be used for RDMA-ing a dma linearly sequential buffer. Change the code to use the dma mr instead of doing fmr when dma mapping produces a single dma entry sg. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>