aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/keyboard
AgeCommit message (Collapse)Author
2008-06-30Input: atkbd - fix HP 2133 not sending release event for video switchJiri Kosina
Video switch key on HP 2133 doesn't send release event, so we have to create workaround similar to what we do for Dell Latitude, i.e. perform DMI match for the system and generate 'false' release event ourselves, so that userspace doesn't think that the key is stuck forever. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-17Merge branch 'for-linus' into nextDmitry Torokhov
Conflicts: drivers/input/mouse/appletouch.c
2008-06-02Input: pxa27x_keypad - add wakeup supportEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-02Input: atkbd - use ushort instead of uchar keymapDmitry Torokhov
Since some of the keycodes defined in input.h have values greater than 255 we should use unsigned shorts in keymaps. Tested-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-28Input: pxa27x_keypad - miscellaneous fixesAntonio Ospite
1. Set input bits for direct keys codes 2. Set input bits for rotary encoder codes only if rotary encoder is enabled 3. Enable EV_REL only if rotary encoder is enabled and rel_codes are set up Signed-off-by: Antonio Ospite <ao2@openezx.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-28Input: atkbd - mark keyboard as disabled when suspending/unloadingDmitry Torokhov
This will shut off garbage that may come from KBD port during resume. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-20Input: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: gpio-keys debouncing supportDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: wacom - add support for Cintiq 20WSX Input: ucb1400_ts - IRQ probe fix Input: at32psif - update MODULE_AUTHOR with new email Input: mac_hid - add lockdep annotation to emumousebtn Input: i8042 - fix incorrect usage of strncpy and strncat Input: bf54x-keys - add infrastructure for keypad wakeups Input: add MODULE_ALIAS() to hotpluggable platform modules Input: drivers/char/keyboard.c - use time_after Input: fix ordering in joystick Makefile Input: wm97xx-core - support use as a wakeup source Input: wm97xx-core - use IRQF_SAMPLE_RANDOM Input: wm97xx-core - only schedule interrupt handler if not already scheduled Input: add Zhen Hua driver Input: aiptek - add support for Genius G-PEN 560 tablet Input: wacom - implement suspend and autosuspend Input: xpad - set proper buffer length for outgoing requests Input: omap-keypad - fix build warning Input: gpio_keys - irq handling cleanup Input: add PS/2 serio driver for AVR32 devices Input: put ledstate in the keyboard notifier ...
2008-04-24Input: bf54x-keys - add infrastructure for keypad wakeupsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-24Input: add MODULE_ALIAS() to hotpluggable platform modulesKay Sievers
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable "input" platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-21Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (212 commits) [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver [ARM] pxa: V4L2 soc_camera driver for PXA270 [ARM] pxa: restrict availability of pxa2xx PCMCIA drivers [ARM] 5005/1: BAST: Fix kset_name initialiser [ARM] 4967/1: Adds functions to set clkout rate for Samsung S3C2410 [ARM] 4988/1: Add GPIO lib support to the EP93xx [ARM] Add initial sparsemem support [ARM] pxa: initialise PXA devices before platform init code [ARM] 5002/1: tosa: add two more leds [ARM] 5004/1: Tosa: make several unreferenced structures static. [ARM] 5003/1: Shut up sparse warnings [ARM] 4977/2: soc - pxa2xx-ac97 - Add missing clk_enable() [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line [ARM] 4974/1: Drop unused leds-tosa. [ARM] 4973/1: Tosa: use leds-gpio driver. [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks [ARM] pxa: lubbock: move mis-placed SPI info [ARM] 4970/1: tosa: correct gpio used for wake up. [ARM] 4966/1: magician: add MFP pin configuration ...
2008-04-19Merge branch 'omap2-upstream' into develRussell King
2008-04-19[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.heric miao
two reasons: 1. GPIO namings and their mode definitions are conceptually not part of the PXA register definitions 2. this is actually a temporary move in the transition of PXA2xx to use MFP-alike APIs (as what PXA3xx is now doing), so that legacy code will still work and new code can be added in step by step Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-18Fix sh_keysc double freeMagnus Damm
Avoid double free situation from happening by removing input_free_device() after input_unregister_device(). Suggested by Dmitry Torokhov. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: SuperH KEYSC platform driverMagnus Damm
Add a platform driver for the SuperH KEYSC block. The driver expects to get mode, timing information and keypad layout from the board code as platform data. The board code is resonsible for pin configuration. Both sh7343 and sh7722 should be supported, but only the sh7722 processor has been tested so far. SH_KEYSC_MODE_3 is yet to be tested. Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-15Input: omap-keypad - fix build warningDavid Brownell
Fix the following build warning: drivers/input/keyboard/omap-keypad.c: In function 'omap_kp_probe': drivers/input/keyboard/omap-keypad.c:418: warning: 'row_idx' is used uninitialized in this function drivers/input/keyboard/omap-keypad.c:421: warning: 'col_idx' is used uninitialized in this function These variables are useful when cpu_is_omap24xx(), and otherwise just for useless cleanup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-15Input: gpio_keys - irq handling cleanupDavid Brownell
Cleanup IRQ handling in gpio_keys: bail after handling the IRQ, and report IRQ_NONE if we never handle it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: tosakbd - fix suspendDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: locomokbd - add 'off' button support for Sharp Collie/PoodleHelge Deller
Enables the Sharp Zaurus Collie and Poodle devices to be turned off by pressing the "Cancel" button for a few seconds (as designed by Sharp). Additional small cleanups: - removal of unused #defines and variables - add missing __devinit/__devexit/__devinitconst annotations - reorganized copyright notice Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-20Input: pxa27x - fix keypad KPC macrosSamuel Ortiz
We want to mask (key_number - 1), not key_number. The current implementation works fine for all values but the maximum one, i.e. 8. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - also enable on PXA3xxEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - add debounce_interval to the keypad platform dataEric Miao
Currently, only one debounce_interval is introduced for both direct and matrix keys. This is true in most cases, although the keypad controller supports different debounce for direct/matrix keys. Some platforms do require this to be tuned, instead of the default reset value of 100ms. Rotary encoder will always use zero debounce time for now to achieve certain sensitivity. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQEric Miao
1. use ioremap() for registers access, this improves the portability of the driver (e.g. same IP on different processor with different I/O memory range), and make it possible to remove those registers definition in pxa-regs.h as PXA is undergoing a clean-up of that header file 2. use device specific IRQ instead of hardcoded IRQ_KEYPAD, same reason as above 3. clean up the error handling path in _probe() 4. remove DRIVER_NAME and use pdev->name when necessary, we don't actually need a constant string literals Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - enable rotary encoders and direct keysEric Miao
1. Rotary encoder events can be configured either as relative events as the legacy code does or as any specified key code, this is useful on some platform which uses the rotary keys as KEY_{UP/DOWN/LEFT/RIGHT} 2. Add support for direct keys, the corresponding keycodes for each direct key can now be specified within the platform data 3. Remove the direct/rotary key detection code from the IRQ handler to dedicated functions to improve readability Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce pxa27x_keypad_config()Eric Miao
Introduce pxa27x_keypad_config() for keypad registers configuration and remove the reg_kpc, reg_kprec from platform data structure so that configurations of keypad registers can be centralized to a single function. It can also be re-used when resuming. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce driver structure and use KEY() to define ↵Eric Miao
matrix keys 1. Introduce the "struct pxa27x_keypad" structure for driver specific information, such as "struct clk", generated matrix key codes and so on 2. Use KEY() macro to define matrix keys, instead of original 8x8 map this makes definition easier with keypad where keys are sparse 3. Keep a generated array in "struct pxa27x_keypad" for fast lookup 4. Separate the matrix scan into a dedicated function for readability and report only those keys whose state has been changed, instead of report all states 5. Make use of KPAS to decide the faster path if only one key has been detected Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - remove pin configuration from the driverEric Miao
The pin configurations will slowly be moved to the board specific code at initialization thus to make the driver more generic. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)Eric Miao
The controller should really be called keypad, and also align the naming of functions and structures to use "pxa27x_keypad" as prefix, instead of "pxakbd". Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: remove duplicate includesAndre Haupt
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: add Tosa keyboard driverDmitry Baryshkov
Add keyboard support on tosa (Sharp Zaurus SL-6000x). Largely based on patches by Dirk Opfer. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: drop redundant includes of moduleparam.hJulia Lawall
Drop #include <linux/moduleparam.h> in files that also include linux/module.h, since module.h includes moduleparam.h already. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: atkbd - remove unneeded synchronize_sched()Dmitry Torokhov
atkbd_disable() provides all necessary synchronization with atkbd_interrupt(). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: atkbd - properly handle special keys on Dell LatitudesGiel de Nijs
Most of Fn+F? special keys on (at least) the Dell Latitude laptops don't generate a hardware key release event so the driver has to generate one. Signed-off-by: Giel de Nijs <giel@caffeinetrip.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-14Input: improve Kconfig help entries for HP Jornada devicesKristoffer Ericson
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-03Input: spitzkbd - fix suspend key handlingRichard Purdie
The spitz keyboard driver reports KEY_SUSPEND events but doesn't register its use of this event in the keybit bitfield, breaking input events for this key. This patch fixes that by registering the key in the keybit bitfield. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-12-14Input: jornada680_kbd - fix default keymapKristoffer Ericson
This patch fixes the HP Jornada 6xx keyboard default keymap which had some bad keymap values. This resulted in wrong key being returned when pressed (for example, key 'y' returned 'r'). Also, while we are at it lets arrange the include files in alphabetical order. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-11-27Input: bf54x-keys - keypad does not exist on BF544 partsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-11-21Input: gpio-keys - request and configure GPIOsHerbert Valerio Riedel
Currently, gpio_keys.c assumes the GPIOs to be already properly configured; this patch changes gpio-keys to perform explicit calls to gpio_request() and gpio_configure_input(). This matches the behaviour of leds-gpio. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - apply idle reset logic to all touchpads Input: usbtouchscreen - add support for GoTop tablet devices Input: bf54x-keys - return real error when request_irq() fails Input: i8042 - export i8042_command()
2007-10-22Input: bf54x-keys - return real error when request_irq() failsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
2007-10-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: use full RCU API Input: remove tsdev interface Input: add support for Blackfin BF54x Keypad controller Input: appletouch - another fix for idle reset logic HWMON: hdaps - switch to using input-polldev Input: add support for SEGA Dreamcast keyboard Input: omap-keyboard - don't pretend we support changing keymap Input: lifebook - fix X and Y axis range Input: usbtouchscreen - add support for GeneralTouch devices Input: fix open count handling in input interfaces Input: keyboard - add CapsShift lock Input: adbhid - produce all CapsLock key events Input: ALPS - add signature for ThinkPad R61 Input: jornada720_kbd - send MSC_SCAN events Input: add support for the HP Jornada 7xx (710/720/728) touchscreen Input: add support for HP Jornada 7xx onboard keyboard Input: add support for HP Jornada onboard keyboard (HP6XX) Input: ucb1400_ts - use schedule_timeout_uninterruptible Input: xpad - fix dependancy on LEDS class Input: auto-select INPUT for MAC_EMUMOUSEBTN option ... Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from a class device to a device and converting to use input-polldev created a few apparently trivial clashes..
2007-10-15Atari keyboard: incorporate additional review commentsGeert Uytterhoeven
Atari keyboard: incorporate additional review comments: o Kill reference to source file name o Return error value from input_register_device() instead of -ENOMEM Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13m68k: Atari input drivers cleanupGeert Uytterhoeven
m68k: Atari input drivers cleanup: - memleak on failed init/register of input devices fixed - correct keycodes table (Atari keycodes are almost, but not entirely, equal to Linux keycodes). Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Input: add support for Blackfin BF54x Keypad controllerMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
Conflicts: drivers/macintosh/adbhid.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 17:40:06 +0000