aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/Kconfig
AgeCommit message (Collapse)Author
2008-12-23Input: add da9034 touchscreen supportEric Miao
Add support for the built-in touchscreen controller in DA9034 (aka Micco), usually found on platforms with xscale processors. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20Input: add tsc2007 based touchscreen driverKwangwoo Lee
This drive has been tested on ARM9 based SoC - MV86XX. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-24Input: add support for Wacom W8001 penabled serial touchscreenJaya Kumar
The Wacom W8001 sensor is a sensor device (uses electromagnetic resonance) and it is interfaced via its serial microcontroller to the host. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-10-22Merge branch 'for-rmk' of git://git.android.com/kernel into develRussell King
2008-10-21[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfigEric Miao
Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-19mfd: further unbork the ucb1400 ac97_bus dependenciesAndrew Morton
Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
2008-08-20[ARM] 5184/1: Split ucb1400_ts into core and touchscreenMarek Vašut
This patch splits ucb1400_ts into ucb1400_ts and ucb1400_core. Since this chip supports more features than only touchscreen, it was necessary to prepare it for feature addition. The previous functionality is preserved by applying this patch. [Build fixes for non-ARM by Stephen Rothwell and Takashi Iwai] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-29Input: wm97xx - enable sub-drivers by defaultMark Brown
Currently the support for each WM97xx touchscreen model is compiled out by default, meaning that the default configuration when the driver is built is for it to support no hardware. This is suboptimal and leads to problems like distribution kernels shipping a non-functional driver. Change the default to support all controllers and update the help text to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-23Input: add driver for Atmel integrated touchscreen controllerDan Liang
The AT91SAM9RL SoC integrates a Touchscreen Controller which can trigger ADC conversion periodically. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreenClaudio Nieder
Signed-off-by: Claudio Nieder <private@claudio.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: Add driver for iNexio serial touchscreen.Richard Lemon
Signed-off-by: Richard Lemon <richard@codelemon.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-02Input: add HTC Shift Touchscreen DriverPau Oliva Fora
Signed-off-by: Pau Oliva Fora <pau@eslack.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: add support for SuperH MigoR touchscreenMagnus Damm
This is V2 of the MigoR touch screen driver. The chip we interface to is unfortunately a custom designed microcontroller speaking some undocumented protocol over i2c. The board specific code is expected to register this device as an i2c chip using struct i2c_board_info [] and i2c_register_board_info(). [dtor@mail.ru: don't enable touchscreen if there are no users] Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add support for streaming mode on MainstoneMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add chip driver for WM97123 touchscreenMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lars Munch <lars@segv.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add chip driver for WM9712 touchscreenMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lars Munch <lars@segv.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add chip driver for WM9705 touchscreenMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: add support for WM97xx familty touchscreensMark Brown
Add support for the touchscreen controllers provided by Wolfson Microelectronics WM97xx series chips in both polled and streaming modes. These drivers have been maintained out of tree since 2003. During that time the driver the primary maintainer was Liam Girdwood and a number of people have made contributions including Dmitry Baryshkov, Stanley Cai, Rodolfo Giometti, Russell King, Marc Kleine-Budde, Ian Molton, Vincent Sanders, Andrew Zabolotny, Graeme Gregory, Mike Arthur and myself. Apologies to anyone I have omitted. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-14Input: improve Kconfig help entries for HP Jornada devicesKristoffer Ericson
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-22Input: usbtouchscreen - add support for GoTop tablet devicesJerrold Jones
Add support for GoTop Super_Q2/GogoPen/PenPower tablets to usbtouchscreen. Protocol discovery was done by Yick Yan Lam. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-12Input: usbtouchscreen - add support for GeneralTouch devicesIlya Frolov
Signed-off-by: Ilya Frolov <zeylie@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-26Input: add support for the HP Jornada 7xx (710/720/728) touchscreenKristoffer Ericson
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-04Input: usbtouchscreen - add support for IdealTEK URTC1000Ondrej Zary
This patch adds support for IdealTEK URTC1000 touchscreen controllers. Documentation can be downloaded at: http://projects.tbmn.org/cgi-bin/trac.cgi/wiki/urtc-1000 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-18Input: add driver for Fujitsu serial touchscreensDmitry Torokhov
These serial touchscreens are found on some Fujitsu lifebook P-series laptops, and the B6210. Using this requires a new version of inputattach and doing: inputattach -fjt /dev/ttyS0 Big thanks to Stephen Hemminger for testing it and making it work on his B6210 laptop. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: usbtouchscreen - add support for IRTOUCHSYSTEMS touchscreensOndrej Zary
This patch adds support for IRTOUCHSYSTEMS (or UNITOP) infrared touchscreens. The touchscreen sends data in 8-byte packets. BYTE 0 - unknown meaning, seen only one value: 0x54 BYTE 1 - unknown meaning, 3 lowest bits indicate touch state values seen: 0x81, 0x82 or 0x83 bit 0 = set if the screen is touched and was not touched before (touch bit 1 = set if the screen is touched and was touched (dragging) bit 2 = set if the touch was ended (release) BYTES 2 and 3 - X position, high-order-byte first, range = 0 to 0x0FFF BYTES 4 and 5 - Y position, high-order-byte first, range = 0 to 0x0FFF BYTE 6 - unknown meaning, seen only one value: 0xFF BYTE 7 - unknown meaning, seen only one value: 0x00 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - SPI_CPHA mode bugfix Input: ads7846 - document that it handles tsc2046 too Input: input-polldev - add module info Input: ucb1x00-ts - remove commented out code Input: ucb1400_ts - use sched_setscheduler() Input: ALPS - force stream mode Input: iforce - minor clean-ups Input: iforce - fix force feedback not working Input: adbhid - do not access input_dev->private directly Input: logips2pp - add type 72 (PS/2 TrackMan Marble)
2007-05-22Input: ads7846 - document that it handles tsc2046 tooDavid Brownell
The TSC2046 is an updated version of the ADS7846 ... mention that in the Kconfig helptext and driver source. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-15missing dependencies for USB drivers in inputAl Viro
stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Input: move USB touchscreens under drivers/input/touchscreenDmitry Torokhov
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-10Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
2007-01-18Input: ads7846 - be more compatible with the hwmon frameworkDavid Brownell
- Hook up to hwmon * show sensor attributes only if hwmon is present * ... and the board's reference voltage is known * otherwise be just a touchscreen - Report voltages per hwmon convention * measure in millivolts * voltages are named in[0-8]_input (ugh) * for 7846 chips, properly range-adjust vBATT/in1_input Battery measurements help during recharge monitoring. On OSK/Mistral, the measured voltage agreed with a multimeter to several decimal places. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-12-12[PATCH] remove config ordering/dependency between ucb1400-ts and sound subsystemNicolas Pitre
Commit 2d4ba4a3b9aef95d328d74a17ae84f8d658059e2 introduced a dependency that was never meant to exist when the ac97_bus.c module was created. Move ac97_bus.c up the directory hierarchy to make sure it is built when selected even if sound is configured out so things work as originally intended. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] ucb1400_ts depends SND_AC97_BUSRandy Dunlap
This driver is an AC97 codec according to its help text. However, if SOUND is disabled, the "select SND_AC97_BUS" still inserts that into the .config file: # # Sound # # CONFIG_SOUND is not set CONFIG_SND_AC97_BUS=m Even if the config software followed dependency chains on selects, we should try to limit usage of "select" to library-type code that is needed (e.g., CRC functions) instead of bus-type support. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-17Input: add Philips UCB1400 touchscreen driverNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Touchwin serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Touchright serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Penmount serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-16[PATCH] sh: consolidate hp620/hp680/hp690 targets into hp6xxPaul Mundt
Most of the reasons for keeping these separate before was due to hp690 discontig, and since we have a workaround for that now (abusing some shadow space so everything is magically contiguous), there's no reason to keep the targets separate. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[PATCH] spi: ads7846 driverDavid Brownell
This is a driver for the ADS7846 touchscreen sensor, derived from the corgi_ts and omap_ts drivers. Key differences from those two: - Uses the new SPI framework (minimalist version) - <linux/spi/ads7846.h> abstracts board-specific touchscreen info - Sysfs attributes for the temperature and voltage sensors - Uses fewer ARM-specific IRQ primitives The temperature and voltage sensors show up in sysfs like this: $ pwd /sys/devices/platform/omap-uwire/spi2.0 $ ls bus@ input:event0@ power/ temp1 vbatt driver@ modalias temp0 vaux $ cat modalias ads7846 $ cat temp0 991 $ cat temp1 1177 $ So far only basic testing has been done. There's a fair amount of hardware that uses this sensor, and which also runs Linux, which should eventually be able to use this driver. One portability note may be of special interest. It turns out that not all SPI controllers are happy issuing requests that do things like "write 8 bit command, read 12 bit response". Most of them seem happy to handle various word sizes, so the issue isn't "12 bit response" but rather "different rx and tx write sizes", despite that being a common MicroWire convention. So this version of the driver no longer reads 12 bit native-endian words; it reads 16-bit big-endian responses, then byteswaps them and shifts the results to discard the noise. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-13[PATCH] SharpSL: Abstract c7x0 specifics from Corgi Touchscreen driverRichard Purdie
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi Touchscreen driver. Use the new functions in corgi_lcd.c via sharpsl.h for hsync handling and pass the IRQ as a platform device resource. Move a function prototype into the w100fb header file where it belongs. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-11Input: elo - fix help in Kconfig (wrong module name)Michael Prokop
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!