aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen/Makefile
AgeCommit message (Collapse)Author
2008-12-23Input: add da9034 touchscreen supportEric Miao
Add support for the built-in touchscreen controller in DA9034 (aka Micco), usually found on platforms with xscale processors. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20Input: add tsc2007 based touchscreen driverKwangwoo Lee
This drive has been tested on ARM9 based SoC - MV86XX. Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-24Input: add support for Wacom W8001 penabled serial touchscreenJaya Kumar
The Wacom W8001 sensor is a sensor device (uses electromagnetic resonance) and it is interfaced via its serial microcontroller to the host. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-23Input: add driver for Atmel integrated touchscreen controllerDan Liang
The AT91SAM9RL SoC integrates a Touchscreen Controller which can trigger ADC conversion periodically. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-07Input: add driver for Tabletkiosk Sahara TouchIT-213 touchscreenClaudio Nieder
Signed-off-by: Claudio Nieder <private@claudio.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-30Input: Add driver for iNexio serial touchscreen.Richard Lemon
Signed-off-by: Richard Lemon <richard@codelemon.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-06-02Input: add HTC Shift Touchscreen DriverPau Oliva Fora
Signed-off-by: Pau Oliva Fora <pau@eslack.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: add support for SuperH MigoR touchscreenMagnus Damm
This is V2 of the MigoR touch screen driver. The chip we interface to is unfortunately a custom designed microcontroller speaking some undocumented protocol over i2c. The board specific code is expected to register this device as an i2c chip using struct i2c_board_info [] and i2c_register_board_info(). [dtor@mail.ru: don't enable touchscreen if there are no users] Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add support for streaming mode on MainstoneMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add chip driver for WM97123 touchscreenMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lars Munch <lars@segv.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add chip driver for WM9712 touchscreenMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Lars Munch <lars@segv.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: WM97xx - add chip driver for WM9705 touchscreenMark Brown
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-04-02Input: add support for WM97xx familty touchscreensMark Brown
Add support for the touchscreen controllers provided by Wolfson Microelectronics WM97xx series chips in both polled and streaming modes. These drivers have been maintained out of tree since 2003. During that time the driver the primary maintainer was Liam Girdwood and a number of people have made contributions including Dmitry Baryshkov, Stanley Cai, Rodolfo Giometti, Russell King, Marc Kleine-Budde, Ian Molton, Vincent Sanders, Andrew Zabolotny, Graeme Gregory, Mike Arthur and myself. Apologies to anyone I have omitted. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by: Mike Arthur <mike.arthur@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-26Input: add support for the HP Jornada 7xx (710/720/728) touchscreenKristoffer Ericson
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-18Input: add driver for Fujitsu serial touchscreensDmitry Torokhov
These serial touchscreens are found on some Fujitsu lifebook P-series laptops, and the B6210. Using this requires a new version of inputattach and doing: inputattach -fjt /dev/ttyS0 Big thanks to Stephen Hemminger for testing it and making it work on his B6210 laptop. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-08Input: move USB touchscreens under drivers/input/touchscreenDmitry Torokhov
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-17Input: add Philips UCB1400 touchscreen driverNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Touchwin serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Touchright serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Penmount serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-13[PATCH] spi: ads7846 driverDavid Brownell
This is a driver for the ADS7846 touchscreen sensor, derived from the corgi_ts and omap_ts drivers. Key differences from those two: - Uses the new SPI framework (minimalist version) - <linux/spi/ads7846.h> abstracts board-specific touchscreen info - Sysfs attributes for the temperature and voltage sensors - Uses fewer ARM-specific IRQ primitives The temperature and voltage sensors show up in sysfs like this: $ pwd /sys/devices/platform/omap-uwire/spi2.0 $ ls bus@ input:event0@ power/ temp1 vbatt driver@ modalias temp0 vaux $ cat modalias ads7846 $ cat temp0 991 $ cat temp1 1177 $ So far only basic testing has been done. There's a fair amount of hardware that uses this sensor, and which also runs Linux, which should eventually be able to use this driver. One portability note may be of special interest. It turns out that not all SPI controllers are happy issuing requests that do things like "write 8 bit command, read 12 bit response". Most of them seem happy to handle various word sizes, so the issue isn't "12 bit response" but rather "different rx and tx write sizes", despite that being a common MicroWire convention. So this version of the driver no longer reads 12 bit native-endian words; it reads 16-bit big-endian responses, then byteswaps them and shifts the results to discard the noise. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!