aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: wistron - add support for Acer TravelMate 2424NWXCi Input: wistron - fix setting up special buttons Input: add KEY_BLUETOOTH and KEY_WLAN definitions Input: add new BUS_VIRTUAL bus type Input: add driver for stowaway serial keyboards Input: make input_register_handler() return error codes Input: remove cruft that was needed for transition to sysfs Input: fix input module refcounting Input: constify input core Input: libps2 - rearrange exports Input: atkbd - support Microsoft Natural Elite Pro keyboards Input: i8042 - disable MUX mode on Toshiba Equium A110 Input: i8042 - get rid of polling timer Input: send key up events at disconnect Input: constify psmouse driver Input: i8042 - add Amoi to the MUX blacklist Input: logips2pp - add sugnature 56 (Cordless MouseMan Wheel), cleanup Input: add driver for Touchwin serial touchscreens Input: add driver for Touchright serial touchscreens Input: add driver for Penmount serial touchscreens ...
2006-09-27sh: APM/PM support.Andriy Skulysh
This adds some simple PM stubs and the basic APM interfaces, primarily for use by hp6xx, where the existing userland expects it. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-08-05Input: add driver for Touchwin serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Touchright serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: add driver for Penmount serial touchscreensRick Koch
Signed-off-by: Rick Koch <n1gp@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: elo - add support for non-pressure-sensitive touchscreensShaun Jackman
- Use the touch status bit rather than the pressure bits to distinguish a BTN_TOUCH event. Non-pressure-sensitive touchscreens always report full pressure - Report ABS_PRESSURE information only if the touchscreen supports it Signed-off-by: Shaun Jackman <sjackman@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: elo - fix checksum calculationShaun Jackman
Fix 10-byte protocol checksum calculation and do not discard packet early unless it is missing lead in byte. Signed-off-by: Shaun Jackman <sjackman@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-08-05Input: elo - handle input_register_device() failuresDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-02Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
2006-07-02[PATCH] irq-flags: misc drivers: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01[ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includesThomas Gleixner
Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Include the generic header file instead of the ARM specific one. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26Input: fix potential overflows in driver/input/touchscreenDmitry Torokhov
Change all sprintfs into snprintfs to make sure we won't stomp on data adjacent to our buffers. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-06-25[PATCH] random: remove redundant SA_SAMPLE_RANDOM from touchscreen driversMatt Mackall
The core input layer is already calling add_input_randomness. Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-26[PATCH] ads7846 conversion accuracyDavid Brownell
This improves accuracy of the touchscreen and hwmon sensor readings, addressing an issue noted by Imre Deak: there's an extra bit written before the sample (12 bits) gets written out. It also catches up to various comments, and makes the /proc/interrupts entry sensible again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Imre Deak <imre.deak@nokia.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-04Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3490/1: i.MX: move uart resources to board files [ARM] 3488/1: make icedcc_putc do the right thing [ARM] 3487/1: IXP4xx: Support non-PCI systems [ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macros
2006-04-30[ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macrosMarkus Gutschke
Patch from Markus Gutschke In order to prevent gcc from making incorrect optimizations, all asm() statements that define system calls should report memory as clobbered. Recent versions of the headers for i386 have been changed accordingly, but the ARM headers are still defective. This patch fixes the bug tracked at http://bugzilla.kernel.org/show_bug.cgi?id=6205 Signed-off-by: Markus Gutschke <markus@google.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-26Input: ads7846 - improve filtering for thumb press accuracyImre Deak
Providing more accurate coordinates for thumb press requires additional steps in the filtering logic: - Ignore samples found invalid by the debouncing logic, or the ones that have out of bound pressure value. - Add a parameter to repeat debouncing, so that more then two consecutive good readings are required for a valid sample. Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-26Input: ads7846 - report 0 pressure value along with pen up eventImre Deak
X touchscreen drivers that don't interpret the designated pen up message assume a pen up event from a pressure value 0. For these we generate a pressure 0 message along with the pen up message. Signed-off-by: Imre Deak <imre.deak@nokia.com> Acked-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-11Input: ads7846 - handle IRQs that were latched during disabled IRQsImre Deak
The pen down IRQ will toggle during each X,Y,Z measurement cycle. Even though the IRQ is disabled it will be latched and delivered when after enable_irq. Thus in the IRQ handler we must avoid starting a new measurement cycle when such an "unwanted" IRQ happens. Add a get_pendown_state platform function, which will probably determine this by reading the current GPIO level of the pen IRQ pin. Move the IRQ reenabling from the SPI RX function to the timer. After the last power down message the pen IRQ pin is still active for a while and get_pendown_state would report incorrectly a pen down state. When suspending we should check the ts->pending flag instead of ts->pendown, since the timer can be pending regardless of ts->pendown. Also if ts->pending is set we can be sure that the timer is running, so no need to rearm it. Similarly if ts->pending is not set we can be sure that the IRQ is enabled (and the timer is not). Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-11Input: ads7846 - miscellaneous fixesImre Deak
- Add disable attribute to support device locking mode where unintentional touch event shouldn't wake up the system; - Update comments; - Add missing spin_lock_init; - Do device resume with the lock held; - Do cleanup calls / free memory in the reverse order of initialization. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-11Input: ads7846 - use msleep() instead of udelay() in suspendJuha Yrjola
Sometimes a polling loop had a hard time changing state without pre-emption enabled. Use msleep instead, it's better anyway. Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-11Input: ads7846 - debouncing and rudimentary sample filteringImre Deak
Some touchscreens seem to oscillate heavily for a while after touching the screen.  Implement support for sampling the screen until we get two consecutive values that are close enough. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-11Input: ads7846 - power down ADC a bit laterImre Deak
Submit a seperate request for powering down the ADC in ads7846, doing it after the last read request. Otherwise some of the read values are incorrect. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-11Input: ads7846 - add pen_down sysfs attributeImre Deak
It's handy for userspace diagnostics to see the pen down status, to see whether the touchscreen is "stuck" (shortcircuited). Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-03-26[PATCH] ads7846: sparc32 warning fixAndrew Morton
drivers/input/touchscreen/ads7846.c: In function `ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:207: warning: implicit declaration of function `disable_irq' drivers/input/touchscreen/ads7846.c:209: warning: implicit declaration of function `enable_irq' Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25[PATCH] ads7846 build fixAndrew Morton
sparc32: drivers/input/touchscreen/ads7846.c: In function `ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:206: warning: implicit declaration of function `disable_irq' drivers/input/touchscreen/ads7846.c:208: warning: implicit declaration of function `enable_irq' Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15Input: ads7846 - assorted updatesDavid Brownell
This updates the ads7846 touchscreen driver: - to allow faster clocking (this driver doesn't push sample rates); - bugfixes the conversion of spi_transfer to lists; - some dma-unsafe command buffers are fixed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: ads7846 - convert to to dynamic input_dev allocationDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
2006-01-29Input: make needlessly global code staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-01-19[ARM] Convert request_irq+set_irq_type to request_irq with SA_TRIGGERRussell King
There's no need to have request_irq followed by set_irq_type. Just use request_irq with the appropriate SA_TRIGGER flags. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-16[PATCH] sh: consolidate hp620/hp680/hp690 targets into hp6xxPaul Mundt
Most of the reasons for keeping these separate before was due to hp690 discontig, and since we have a workaround for that now (abusing some shadow space so everything is magically contiguous), there's no reason to keep the targets separate. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[PATCH] spi: use linked lists rather than an arrayVitaly Wool
This makes the SPI core and its users access transfers in the SPI message structure as linked list not as an array, as discussed on LKML. From: David Brownell <dbrownell@users.sourceforge.net> Updates including doc, bugfixes to the list code, add spi_message_add_tail(). Plus, initialize things _before_ grabbing the locks in some cases (in case it grows more expensive). This also merges some bitbang updates of mine that didn't yet make it into the mm tree. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] spi: ads7836 uses spi_driverDavid Brownell
This updates the ads7864 driver to use the new "spi_driver" struct, and includes some minor unrelated cleanup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13[PATCH] spi: ads7846 driverDavid Brownell
This is a driver for the ADS7846 touchscreen sensor, derived from the corgi_ts and omap_ts drivers. Key differences from those two: - Uses the new SPI framework (minimalist version) - <linux/spi/ads7846.h> abstracts board-specific touchscreen info - Sysfs attributes for the temperature and voltage sensors - Uses fewer ARM-specific IRQ primitives The temperature and voltage sensors show up in sysfs like this: $ pwd /sys/devices/platform/omap-uwire/spi2.0 $ ls bus@ input:event0@ power/ temp1 vbatt driver@ modalias temp0 vaux $ cat modalias ads7846 $ cat temp0 991 $ cat temp1 1177 $ So far only basic testing has been done. There's a fair amount of hardware that uses this sensor, and which also runs Linux, which should eventually be able to use this driver. One portability note may be of special interest. It turns out that not all SPI controllers are happy issuing requests that do things like "write 8 bit command, read 12 bit response". Most of them seem happy to handle various word sizes, so the issue isn't "12 bit response" but rather "different rx and tx write sizes", despite that being a common MicroWire convention. So this version of the driver no longer reads 12 bit native-endian words; it reads 16-bit big-endian responses, then byteswaps them and shifts the results to discard the noise. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-09[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] drivers/input/touchscreen: convert to dynamic input_dev allocationDmitry Torokhov
Input: convert drivers/input/touchscreen to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-13[PATCH] SharpSL: Abstract c7x0 specifics from Corgi Touchscreen driverRichard Purdie
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi Touchscreen driver. Use the new functions in corgi_lcd.c via sharpsl.h for hsync handling and pass the IRQ as a platform device resource. Move a function prototype into the w100fb header file where it belongs. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by: Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] w100fb: Update corgi platform code to match new driverRichard Purdie
This patch moves the platform specific Sharp SL-C7x0 LCD code from the w100fb driver into a more appropriate place and updates the Corgi code to match the new w100fb driver. It also updates the corgi touchscreen code to match the new simplified interface available from w100fb. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] Corgi touchscreen: Fix a pmu bugRichard Purdie
Corgi Touchscreen bugfix. If the PMU isn't running, the register needs to be set to a sane value rather than reusing some random value. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] Corgi Touchscreen: Code cleanup / fixesRichard Purdie
Clean up some Corgi Touchscreen logic and merge the repeat calls to w100fb_blanking() in anticipation of the w100fb patch. Fix a pm_message_t reference. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07[PATCH] Corgi Touchscreen: Allow the driver to share the PMURichard Purdie
The Corgi Touchscreen driver uses the PMU as an accurate timing source which conflicts with its usage for performance monitoring. This patch allows it to be shared with other users such as oprofile. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-11Input: elo - fix help in Kconfig (wrong module name)Michael Prokop
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29Input: remove user counters from drivers/input/touchscreen sinceDmitry Torokhov
input core takes care of calling open and close methods only when needed. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-29Input: whitespace fixes in drivers/input/touchscreenDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-05-28Input: gunze - fix out-of-bound array access reported by Adrian Bunk.Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 08:33:05 +0000