aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2009-08-09Input: combine hil_kbd and hil_ptr driversDmitry Torokhov
hil_kbd and hil_ptr look like twins so it makes sense to combine them into a single driver. [deller@gmx.de: add MODULE_ALIAS() entry for mouse] Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: hil_kbd - prepare for merging with hil_ptrDmitry Torokhov
Rename functions and variables from [hil_]kbd to [hil_]dev in preparation of merging hil_kbd and hil_ptr. Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-09Input: hil_kbd - switch to use completion instead of semaphoreDmitry Torokhov
Stop abusing semaphore for waiting, use completion instead. Also handle errors from input_register_device. Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-08Input: wistron_btns - switch to using dev_pm_opsDmitry Torokhov
Also start using 'bool' where it makes sense. Tested-by: Giuseppe Mazzotta <g.mazzotta@iragan.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: serio - don't use serio->write() directlyDmitry Torokhov
We have a nice wrapper for that. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-05Input: hgpk - forced recalibration for the OLPC touchpadPaul Fox
The OLPC XO laptop incorporates a combination touchpad/tablet device which unfortunately requires frequent recalibration. The driver will force this automatically when various suspicious behaviors are observed, and the user can recalibrate manually (with a special keyboard sequence). There's currently no way, however, for an external program to cause recalibration. We can not use the reconnect capability which is already available in /sys because full reset of the touchpad takes 1.1 - 1.2 secons which is too long. This patch creates a new node in /sys which, when written with '1', will force a touchpad recalibration; no other writes (or reads) of this node are supported. Signed-off-by: Paul Fox <pgf@laptop.org> Acked-by: Andres Salomon <dilinger@collabora.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-04Input: tsc2007 - check if I2C communication works during probeRichard Röjfors
Check the result when sending the power down command to the controller. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-04Input: tsc2007 - make get_pendown_state platform callback optionalDmitry Torokhov
In cases when get_pendown_state callback is not available have the driver to fallback on pressure calculation to determine if the pen is up. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-27Input: usbtouchscreen - add support for e2i touchscreen controllerFlorian Echtler
This patch adds support for the e2i touchscreen controller used in the Mimo 740 (and probably in other e2i touchscreen products). Tested on Mimo 740. Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - do not read coordinates during probeRichard Röjfors
Don't read coordinates during probe of the driver, just power down the controller and wait for interrupts. Signed-off-by: Richard Röjfors<richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - make init/exit platform hw callbacks optionalRichard Röjfors
Make init_platform_hw and exit_platform_hw callbacks optional since they are not needed on all platforms. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - properly shut off interrupts/delayed workDmitry Torokhov
Properly shut off interrupts/delayed work by free-ing IRQ first and then ensuring that enable/disable is balanced. Also add __devinit/__devexit markings, restore poll delay/period scheduling logic, make sure we call exit_platform_hw() method when probe fails. Tested-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: tsc2007 - remove HR timerRichard Röjfors
Since it's not allowed to do synchronous I2C in the HR timer callback context we have to switch to using the global workqueue. The work is scheduled every 1ms when polling rather than 5 us. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: pxa27x_keypad - switch to using dev_pm_opsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: serio - switch to using dev_pm_opsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-26Input: i8042 - switch to using dev_pm_opsDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-24Input: gpio_keys - swtich to dev_pm_opsMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-23Input: bf54x-keys - convert printk() to dev_*()Mike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-23Input: add Blackfin rotary input driverMichael Hennerich
This driver handles the Blackfin on-chip rotary peripheral. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-22Input: pxa27x_keypad - remove extra clk_disableDmitry Torokhov
clk_disable() in remove method is not needed since we already have clk_disable in pxa27x_keypad_close(). Also make sure the driver uses resource_size() and helpers from include/input/matrix_keypad.h Tested-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-22Merge commit 'v2.6.31-rc4' into nextDmitry Torokhov
2009-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add force relese key quirk for Soltech TA12 Input: fix EVIOCGNAME/JSIOCGNAME regression Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525 Input: pcspkr - switch driver to dev_pm_ops Input: xpad - don't resend successfully sent outgoing requests Input: wistron_btns - recognize Maxdata Pro 7000 notebooks
2009-07-21Input: sh_keysc - allow modifying keymap from userspaceDmitry Torokhov
Adjust the driver so EVIOCGKEYCODE/EVIOCSKEYCODE work. Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-20Input: wm97xx - add possibility to control the GPIO_STATUS shiftMarek Vasut
This patch allows tweaking the behaviour of GPIO_STATUS register shift quirk that's in wm97xx-core. The problem with GPIO_STATUS register being shifted by one doesn't appear on all hardware it seems and causes problems with accelerated touchscreen drivers on Palm hardware. Therefore an accelerated touchscreen driver can select if the shift is/isn't happening on the hardware. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-20Input: wm97xx - add Palm support to Mainstone accelerated touchMarek Vasut
This patch refactors the Mainstone accelerated touch code a little and adds support for interrupt driven touchscreen on Palm LifeDrive, TX and Tungsten T5. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-20Input: atkbd - add force relese key quirk for Soltech TA12Jerone Young
Netbooks based on the Soltech TA12 do not send a key release for volume keys causing Linux to think the key is constantly being pressed forever. Added quirk data for forced release keys. BugLink: https://bugs.launchpad.net//bugs/397499 Signed-off-by: Jerone Young <jerone.young@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-13Input: fix EVIOCGNAME/JSIOCGNAME regressionDaniel Mack
Commit 3d5cb60e ("Input: simplify name handling for certain input handles") introduced a regression for the EVIOCGNAME/JSIOCGNAME ioctl. Before this, patch, the platform device's name was given back to userspace which was good to identify devices. After this patch, the device is ("event%d", minor) which is not descriptive at all. This fixes the behaviour by taking dev->name. Reported-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Daniel Mack <daniel@caiaq.de> Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: w90p910_ts - use clk APIWan ZongShun
Now that clk API is available on ARM we can use it in the driver. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: ucb1400_ts - fix a misleading function nameHans J. Koch
The driver for UCB1400 touchscreen controllers contains a function named ucb1400_ts_pen_down(), but it returns 0 if the pen is down and 1 if it's up. This causes confusion, especially since it's used as a boolean truth value later in the code. This patch renames it. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: atkbd - add forced release keys quirk for FSC Amilo Pi 3525Simon Davie
This patch enables forced releasing of the Fn+Volume hotkeys on the Fujitsu Siemens Amilo Pi 3525 notebook. Signed-off-by: Simon Davie <nexx@nexxdesign.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: pcspkr - switch driver to dev_pm_opsFrans Pop
Gets rid of the following warning: Platform driver 'pcspkr' needs updating - please use dev_pm_ops Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: xpad - don't resend successfully sent outgoing requestsMichael Gruber
This avoids an infinite loop. Signed-off-by: Michael Gruber <lists.mg@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-12Input: wistron_btns - recognize Maxdata Pro 7000 notebooksGiuseppe Mazzotta
This patch adds DMI information to automatically load the correct layout for the Maxdata Pro 7000X/DX notebook models. Such notebooks are clones of Fujitsu Amilo V2000, the hook for the v2000 is being used and I have tested that perfectly works. The immediate result of integrating this patch is that the five special buttons will work on these specific notebook models and that the RF killswitch will not be activated after suspend. This patch definitively obsoletes the fsam7400 module which I was still needing to enable wifi and to fix the RF killswitch suspend problem; in the current 2.6.30 kernel it is necessary to load the wistron_btns module with options 'force=1 keymap=1557/MS2141', which was not anyway a complete workaround. Signed-off-by: Giuseppe Mazzotta <g.mazzotta@iragan.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_mouse - use standard driver registration method Input: mark serio and i8042 as suspended when hibernating too Input: add support for generic GPIO-based matrix keypad Input: arrange keyboards alphabetically Input: gpio-keys - avoid possibility of sleeping in timer function Input: gpio-keys - revert 'change timer to workqueue' Input: dm355evm_keys - fix kconfig symbol names Input: wacom - add DTF720a support and fix rotation on Intuos3 Input: i8042 - more reset quirks for MSI Wind-clone netbooks
2009-07-07Input: usbtouchscreen - support for JASTEC/DigiTech DTR-02U USB touch ↵Jim Persson
controllers Add support for the JASTEC/DigiTech DTR-02U USB touch screen controllers. Signed-off-by: Jim Persson <jim-linux@nurd.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-07Input: use resource_size when allocating resourcesJulia Lawall
Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-07Input: gpio_mouse - use standard driver registration methodSaeed Bishara
This patch is needed when the gpio's became available only at late stages, for example, when using i2c gpio expander. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-07Input: mark serio and i8042 as suspended when hibernating tooThadeu Lima de Souza Cascardo
Serio ports are not being restarted any longer because resume operations after hibernate do nothing, since the device has not been marked as suspended. This happens because suspend is only considering the SUSPEND event but not the FREEZE event. Note that this driver has still to migrate to dev_pm_ops, but this fixes this particular bug now. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-03Update Yoichi Yuasa's e-mail addressYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-29Input: add support for generic GPIO-based matrix keypadEric Miao
Original patch by Marek Vasut, modified by Eric in: 1. use delayed work to simplify the debouncing 2. combine col_polarity/row_polarity into a single active_low field 3. use a generic bit array based XOR algorithm to detect key press/release, which should make the column assertion time shorter and code a bit cleaner 4. remove the ALT_FN handling, which is no way generic, the ALT_FN key should be treated as no different from other keys, and translation will be done by user space by commands like 'loadkeys'. 5. explicitly disable row IRQs and flush potential pending work, and schedule an immediate scan after resuming as suggested by Uli Luckas 6. incorporate review comments from many others Patch tested on Littleton/PXA310 (though PXA310 has a dedicate keypad controller, I have to configure those pins as generic GPIO to use this driver, works quite well, though), and Sharp Zaurus model SL-C7x0 and SL-C1000. [dtor@mail.ru: fix error unwinding path, support changing keymap from userspace] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Trilok Soni <soni.trilok@gmail.com> Reviewed-by: Uli Luckas <u.luckas@road.de> Reviewed-by: Russell King <linux@arm.linux.org.uk> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-29Input: arrange keyboards alphabeticallyDmitry Torokhov
Hopefully it will reduce conflicts when merging patches. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-29Input: dm355evm_keys - use threaded IRQsDavid Brownell
Convert the dm355evm keys driver to use IRQ threading instead of a private workqueue. IRQ threads were added to Linux after this driver was written, and in this case fit what the driver needs. (Although the non-shared thread costs more runtime memory.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: gpio-keys - avoid possibility of sleeping in timer functionJani Nikula
The gpio_get_value function may sleep, so it should not be called in a timer function. Move gpio_get_value calls to workqueue. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: gpio-keys - revert 'change timer to workqueue'Jani Nikula
This reverts commit 0b346838c5862bfe911432956a106d602535d030. This commit breaks GPIO debouncing by replacing the original mod_timer with schedule_delayed_work in the interrupt handler. The latter does not kick the timer further on GPIO line changes as it should to perform debouncing. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: wacom - add DTF720a support and fix rotation on Intuos3Ping Cheng
This patch adds DTF720a support and fixes an Intuos3 rotation pen out-proximity bug. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-28Input: i8042 - more reset quirks for MSI Wind-clone netbooksYan Li
When testing Moblin on various netbooks, we've got reports that many MSI Wind clones need the i8042 reset quirks for the keyboard and/or touchpad's proper function. Signed-off-by: Yan Li <yan.i.li@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
2009-06-19Input: add driver for Synaptics I2C touchpadMike Rapoport
This driver supports Synaptics I2C touchpad controller on eXeda mobile device. Unfortunaltely it only works in relative mode and thus is not comaptible with Xorg Synaptics driver. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19Input: synaptics - add support for reporting x/y resolutionTero Saarni
Synaptics uses anisotropic coordinate system. On some wide touchpads vertical resolution can be twice as high as horizontal which causes unequal sensitivity on x/y directions. Add support for reading the resolution with EVIOCGABS ioctl. Signed-off-by: Tero Saarni <tero.saarni@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-16Merge branch 'akpm'Linus Torvalds
* akpm: (182 commits) fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset fbdev: *bfin*: fix __dev{init,exit} markings fbdev: *bfin*: drop unnecessary calls to memset fbdev: bfin-t350mcqb-fb: drop unused local variables fbdev: blackfin has __raw I/O accessors, so use them in fb.h fbdev: s1d13xxxfb: add accelerated bitblt functions tcx: use standard fields for framebuffer physical address and length fbdev: add support for handoff from firmware to hw framebuffers intelfb: fix a bug when changing video timing fbdev: use framebuffer_release() for freeing fb_info structures radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb? s3c-fb: CPUFREQ frequency scaling support s3c-fb: fix resource releasing on error during probing carminefb: fix possible access beyond end of carmine_modedb[] acornfb: remove fb_mmap function mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF mb862xxfb: restrict compliation of platform driver to PPC Samsung SoC Framebuffer driver: add Alpha Channel support atmel-lcdc: fix pixclock upper bound detection offb: use framebuffer_alloc() to allocate fb_info struct ... Manually fix up conflicts due to kmemcheck in mm/slab.c
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 18:43:50 +0000