aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2007-06-28Input: atkbd - use printk_ratelimit for spurious ACK messagesQi Yong
Signed-off-by: Qi Yong <qiyong@mail.fc-cn.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28Input: atkbd - throttle LED switchingDmitry Torokhov
On some boxes keyboard controllers are too slow to withstand continuous flow of requests to turn keyboard LEDs on and off and start losing some keypresses or even all of them. Delay executing of LED switching request if we had another one within 50 ms thus easing load on the controller. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28Input: i8042 - add HP Pavilion ZT1000 to the MUX blacklistDmitry Torokhov
This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0" messages caused by broken MUX implementation. The box does not have external PS/2 ports and, according to documentation, automatically disables touchpad when an external mouse is plugged into a port replicator, so MUX mode would not work anyway. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-13Input: move input-polldev to drivers/inputDmitry Torokhov
To work around deficiences in Kconfig that allows to "select" a symbol without automatically selecting all dependencies for that symbol move input-polldev from drivers/input/misc to drivers/input thus removing extra dependency on CONFIG_INPUT_MISC. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: i8042 - add ULI EV4873 to noloop listDmitry Torokhov
The box does not implement AUX LOOP command properly and so we can't test for AUX IRQ delivery so blacklist it via DMI and assume that AUX port is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: i8042 - add ASUS P65UP5 to the noloop listDmitry Torokhov
This board does not raise AUX IRQ in response to AUX LOOP command which interferes with our test for proper AUX IRQ wiring. Put it in the blacklist and assume mouse is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: usbtouchscreen - fix fallout caused by move from drivers/usbOndrej Zary
During the move from drivers/usb/input into drivers/input/touchscreen Kconfig variables were shuffled a bit to use a new namespace (CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones. Also noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-03Input: reduce raciness when input handlers disconnectDmitry Torokhov
There is a race between input handler's release() and disconnect() methods: when input handler disconnects it wakes up all regular users and then process to walk user list to wake up async. users. While disconnect() walks the list release() removes elements of the same list causing oopses. While this is not a substibute for proper locking we can reduce odds of getting an oops if we wake up normal readers after walking the list. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-28Input: logips2pp - fix typo in KconfigUwe Bugla
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-28Input: db9 - do not ignore dev2 module parameterDmitry Torokhov
Because of incorrect parameter setup anything passed in dev2=... was always ignored by the driver. See bugzilla #8541. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ads7846 - SPI_CPHA mode bugfixSemih Hazar
In commit [1] the SPI mode is set to 1, but it should be 0. As stated in the commit, ads784x samples the data on the rising edge. SPI mode 1 samples on the falling edge [2] though. The root cause of this is a bug in the omap_uwire code, which treats CPHA=1 incorrectly; so these two bugs cancel each other out on one of the main regression test platforms for this driver. [1] kernel.org GIT 7937e86a70235e1584486654687dc9908a11e00a [2] http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ads7846 - document that it handles tsc2046 tooDavid Brownell
The TSC2046 is an updated version of the ADS7846 ... mention that in the Kconfig helptext and driver source. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: input-polldev - add module infoEric Piel
This is required to load it as a module, as GPL-compatible license is necessary to use workqueues. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ucb1400_ts - use sched_setscheduler()Satoru Takeuchi
Fix Philips UCB1400 driver to use sched_setscheduler() instead of setting the fields of task_struct directly. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ALPS - force stream modeDmitry Torokhov
ALPS appears to need SETSTREAM command after reset, otherwise it does not produce any data. Now that we do not request stream mode by default individual drivers need to take care of it. [Jason Riedy <ejr@cs.berkeley.edu> - fix oops] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: iforce - minor clean-upsJohann Deneux
Signed-off-by: Johann Deneux <johann.deneux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: iforce - fix force feedback not workingJohann Deneux
Use an interrupt URB to send force-feedback data to the device instead of a bulk URB. This was broken since 2.6.18. Signed-off-by: Johann Deneux <johann.deneux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-08Input: logips2pp - add type 72 (PS/2 TrackMan Marble)Peter Samuelson
This is purely cosmetic: this is standard 3-button, no wheel or other such features, so it already _worked_ just fine. This patch suppresses a warning about the unknown model, and changes the printk from "Mouse" to "TrackMan". Signed-off-by: Peter Samuelson <peter@p12n.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-08Input: move USB miscellaneous devices under drivers/input/miscDmitry Torokhov
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08Input: move USB mice under drivers/input/mouseDmitry Torokhov
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08Input: move USB gamepads under drivers/input/joystickDmitry Torokhov
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08Input: move USB touchscreens under drivers/input/touchscreenDmitry Torokhov
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08Input: move USB tablets under drivers/input/tabletDmitry Torokhov
This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-08Input: i8042 - fix AUX port detection with some chipsRoland Scheidegger
The i8042 driver fails detection of the AUX port with some chips, because they apparently do not change the I8042_CTR_AUXDIS bit immediately. This is known to affect at least HP500/HP510 notebooks, consequently the built-in touchpad will not work. The patch will simply reread the value until it gets the expected value or a retry limit is hit, without touching other workaround code in the same area. Signed-off-by: Roland Scheidegger <sroland@tungstengraphics.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
2007-05-07sh: hp6xx driver compile fixes.Kristoffer Ericson
Trivial compilation fixes for the hp6xx drivers. Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-04Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (65 commits) Input: gpio_keys - add support for switches (EV_SW) Input: cobalt_btns - convert to use polldev library Input: add skeleton for simple polled devices Input: update some documentation Input: wistron - fix typo in keymap for Acer TM610 Input: add input_set_capability() helper Input: i8042 - add Fujitsu touchscreen/touchpad PNP IDs Input: i8042 - add Panasonic CF-29 to nomux list Input: lifebook - split into 2 devices Input: lifebook - add signature of Panasonic CF-29 Input: lifebook - activate 6-byte protocol on select models Input: lifebook - work properly on Panasonic CF-18 Input: cobalt buttons - separate device and driver registration Input: ati_remote - make button repeat sensitivity configurable Input: pxa27x - do not use deprecated SA_INTERRUPT flag Input: ucb1400 - make delays configurable Input: misc devices - switch to using input_dev->dev.parent Input: joysticks - switch to using input_dev->dev.parent Input: touchscreens - switch to using input_dev->dev.parent Input: mice - switch to using input_dev->dev.parent ... Fixed up conflicts with core device model removal of "struct subsystem" manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: remove "struct subsystem" as it is no longer needed sysfs: printk format warning DOC: Fix wrong identifier name in Documentation/driver-model/devres.txt platform: reorder platform_device_del Driver core: fix show_uevent from taking up way too much stack
2007-05-04hilkbd: Kill compiler warning and fix comment dyslexiaGeert Uytterhoeven
hilkbd: Kill compiler warning and fix comment dyslexia Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: Atari keyboard and mouse support.Michael Schmitz
Atari keyboard and mouse support. (reformating and Kconfig fixes by Roman Zippel) Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-03Input: aaed2000_kbd - convert to use polldev libraryDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-03Input: synaptics - don't complain about failed resetsDmitry Torokhov
On many laptops (Compaq, HP) the touchpad is so slow responding to reset that keyboard controller times out. The device is reset nonetheless and works fine. Kill the "synaptics reset failed" error; if device is not working then other parts of synaptics_query_hardware() will fail anyway. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-03Input: pull input.h into uinpit.hMike Frysinger
uinput.h relies on structures found in input.h, so pull in the header Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-03Input: evdev - fix some sparse warnings (signedness, shadowing)Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-03Input: drivers/joystick - fix various sparse warningsDmitry Torokhov
Fix various issues pointed by sparse: - module_param_array_named() takes unsigned int as number of parameters argument - shadowing of global variables is not healthy. I think there was once a bug in db9 caused by it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-03Input: force feedback - make sure effect is present before playingDmitry Torokhov
Make sure that requested effect id is not out of range for the device and that effect is present before requesting device to play it. Reported-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-02remove "struct subsystem" as it is no longer neededGreg Kroah-Hartman
We need to work on cleaning up the relationship between kobjects, ksets and ktypes. The removal of 'struct subsystem' is the first step of this, especially as it is not really needed at all. Thanks to Kay for fixing the bugs in this patch. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-01Input: gpio_keys - add support for switches (EV_SW)Roman Moravcik
Signed-off-by: Roman Moravcik <roman.moravcik@gmail.com> Signed-off-by: Paul Sokolovsky <pmiscml@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-01Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
Conflicts: drivers/usb/input/Makefile drivers/usb/input/gtco.c
2007-04-29Input: cobalt_btns - convert to use polldev libraryDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2007-04-29Input: add skeleton for simple polled devicesDmitry Torokhov
input-polldev provides a skeleton for supporting simple input devices that need to be periodically scanned or polled to detect changes in their state. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-29Input: wistron - fix typo in keymap for Acer TM610Eric Piel
This patch fixes typo that prevented PROG2 key from working on Acer Travelmate 610. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-27Input: gameport - do not touch bus's rwsemDmitry Torokhov
The subsystem rwsem is not used by the driver core at all, so there is no point in trying to access it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27Input: serio - do not touch bus's rwsemDmitry Torokhov
The subsystem rwsem is not used by the driver core at all, so there is no point in trying to access it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-25Input: add input_set_capability() helperDmitry Torokhov
Add input_set_capability() helper used to indicate that an input device supports a certain event without need to manipulate bitmaps directly. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-25Input: i8042 - add Fujitsu touchscreen/touchpad PNP IDsDmitry Torokhov
Add PNP IDs for Fujitsu touchscreen/touchpad for AUX port detection to latch onto. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-25Input: i8042 - add Panasonic CF-29 to nomux listDmitry Torokhov
There is no data coming from touchscreen on Panasonic CF-29 notebook unless keyboard controller is in legacy mode. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-25Input: lifebook - split into 2 devicesDmitry Torokhov
Have lifebook protocol register 2 separate input devices - one for the touchscreen reporting absolute coordinates and touches and another one for touchpad reporting relative coordinates and left and right button presses. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-25Input: lifebook - add signature of Panasonic CF-29Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-12Input: lifebook - activate 6-byte protocol on select modelsDmitry Torokhov
It appears that if we turn on 6-byte Lifebook protocol on Panasonic CF-28 its touchpad is left alone and generates standard 3-byte PS/2 data stream with relative packets instead of being converted in 3-byte Lifebook protocol with absolute coordinates - in other words what get what we need to distinguish between touchscreen and touchpad. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-22 16:17:44 +0000