aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2007-07-10Input: aiptek - tolerate newlines in sysfs filesRene van Paassen
Now echo "some value" > /sys/......./somefile is also acceptable. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct the tool switching codeRene van Paassen
Now the old tool is remembered, and reset when a new tool is selected via the sysfs files. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use only absolute misc reportsRene van Paassen
To get an on - off reporting for proximity, absolute misc reports are used. The mixture of absolute and relative reports is awkward Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - put sensible warnings in probeRene van Paassen
Added warnings to the points where the tablet probe may fail Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use set_bit instead of bitwise orRene van Paassen
Have to use set_bit since some bit values are over 32, and bitwise or won't work on these. To be safe for the future too, use set_bit for all input dev capabilities Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - fix relative mode parsingMark Vytlacil
Corrections to relative mode, was looking at wrong byte Signed-off-by: Mark Vytlacil <mrv@wi.rr.com> Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - fixed mouse button definesRene van Paassen
Mouse button defines tested the wrong bits, now fixed Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct the proximity and validity checksRene van Paassen
Calculation of proximity bit and of data valid bits were reversed for stylus reports. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct documentation on reportsRene van Paassen
Small fix that corrects the documentation on the report byte format produced by the mouse Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use array to list all buttonsDmitry Torokhov
When setting up input device use an array to list all the buttons instead of setting every bit separately. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - kill aiptek_convert_from_2s_complement()Dmitry Torokhov
There is no reason to do that, just tell the compiler that we are dealing with signed values in buffer, that's it. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use maps in attributesDmitry Torokhov
Use maps to convert for strings to internal constants and vice versa in aiptek's sysfs attribute methods instead of open-coding it. This results in smaller code that is also easier to maintain. [Rene: fix a typo - stylys instead of stylus] Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - do not check for NULL in attribute methodsDmitry Torokhov
It makes no sense to check for NULL in attribute methods - we do usb_set_intfdata before creating attributes and once attributes have been removed we are guaranteed to not be called. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use attribute groupDmitry Torokhov
Use attribute group to simplify error handling and reduce code. [Rene: add missing NULL to properly terminate aiptek_attributes] Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - remove vendor and product attributes from sysfsDmitry Torokhov
They are already exported by input core; there is no need to do it twice. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - do not try to export associated event deviceDmitry Torokhov
Do not try to export via sysfs associated event device - it does not work when evdev is a module that is loaded after aiptek; also it pokes too deply into input core internals. Userspace should rely on udev to set up permanent device name for the tablet. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: psmouse - add support for Cortron PS/2 TrackballsAristeu Rozanski
Cortron PS/2 Trackballs (700-0001A) report the 4th button using the 4th bit of the first packet (yes, it breaks the standard PS/2 protocol). This patch adds an extra protocol to generate BTN_SIDE based on the 4th bit. There's no way to detect those trackballs using any kind of special sequence, thus the protocol must be activated explicitely by writing into 'protocol' sysfs attribute: echo -n "cortps" > /sys/devices/platform/i8042/serio1/protocol Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - add Xbox360 gamepad rumble supportJan Kratochvil
Implementation is using force feedback support for memoryless devices. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - add support for Xbox 360 gamepadJan Kratochvil
Xbox 360 gamepad is slightly different then the previous model so it has its own version of process_packet method. Detection of this new device relies on USB_DEVICE_INTERFACE_PROTOCOL macro. This device got vendor specific subclass so it can't be matched with USB_INTERFACE_INFO and we need only one interface protocol from four availaible. It means USB_DEVICE can't be used either. Added xpad360_btn structure with additional buttons for x360 gamepad. Added xtype into xpad_device structure to distinguish between different types of xbox devices. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document some of keycodes Input: add a new EV_SW SW_RADIO event, for radio switches on laptops Input: serio - take drv_mutex in serio_cleanup() Input: atkbd - use printk_ratelimit for spurious ACK messages Input: atkbd - throttle LED switching Input: i8042 - add HP Pavilion ZT1000 to the MUX blacklist
2007-06-29Input: serio - take drv_mutex in serio_cleanup()Dmitry Torokhov
We need to take serio->drv_mutex in serio_cleanup() to prevent the function from being called while driver is in the middle of attaching to a serio port. Such situation can happen with i8042 and atkbd drivers if user rapidly presses Ctrl-Alt-Del during system startup, and leads to kernel oops. Reported-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28Input: atkbd - use printk_ratelimit for spurious ACK messagesQi Yong
Signed-off-by: Qi Yong <qiyong@mail.fc-cn.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28Input: atkbd - throttle LED switchingDmitry Torokhov
On some boxes keyboard controllers are too slow to withstand continuous flow of requests to turn keyboard LEDs on and off and start losing some keypresses or even all of them. Delay executing of LED switching request if we had another one within 50 ms thus easing load on the controller. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28Input: i8042 - add HP Pavilion ZT1000 to the MUX blacklistDmitry Torokhov
This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0" messages caused by broken MUX implementation. The box does not have external PS/2 ports and, according to documentation, automatically disables touchpad when an external mouse is plugged into a port replicator, so MUX mode would not work anyway. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-20x86_64: Quieten Atari keyboard warnings in KconfigAndi Kleen
Not directly related to x86, but I got tired of seeing these warnings on every kconfig update when building on a non m68k box: drivers/input/keyboard/Kconfig:170:warning: 'select' used by config symbol 'KEYBOARD_ATARI' refers to undefined symbol 'ATARI_KBD_CORE' drivers/input/mouse/Kconfig:182:warning: 'select' used by config symbol 'MOUSE_ATARI' refers to undefined symbol 'ATARI_KBD_CORE' I moved the definition of ATARI_KBD_CORE into drivers/input/keyboard/Kconfig so it's always seen by Kconfig. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: move input-polldev to drivers/input Input: i8042 - add ULI EV4873 to noloop list Input: i8042 - add ASUS P65UP5 to the noloop list Input: usbtouchscreen - fix fallout caused by move from drivers/usb
2007-06-13Input: move input-polldev to drivers/inputDmitry Torokhov
To work around deficiences in Kconfig that allows to "select" a symbol without automatically selecting all dependencies for that symbol move input-polldev from drivers/input/misc to drivers/input thus removing extra dependency on CONFIG_INPUT_MISC. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: i8042 - add ULI EV4873 to noloop listDmitry Torokhov
The box does not implement AUX LOOP command properly and so we can't test for AUX IRQ delivery so blacklist it via DMI and assume that AUX port is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: i8042 - add ASUS P65UP5 to the noloop listDmitry Torokhov
This board does not raise AUX IRQ in response to AUX LOOP command which interferes with our test for proper AUX IRQ wiring. Put it in the blacklist and assume mouse is present. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-12Input: usbtouchscreen - fix fallout caused by move from drivers/usbOndrej Zary
During the move from drivers/usb/input into drivers/input/touchscreen Kconfig variables were shuffled a bit to use a new namespace (CONFIG_TOUCHSCREEN) while usbtouchscreen was still using old ones. Also noticed by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: fix pxa27x keyboard driver [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking [ARM] 4421/1: AT91: Value of _KEY fields. [ARM] Solve buggy smp_processor_id() usage [ARM] 4422/1: Fix default value handling in gpio_direction_output (PXA) [ARM] 4419/1: AT91: SAM9 USB clocks check for suspending [ARM] 4418/1: AT91: Number of programmable clocks differs [ARM] 4392/2: Do not corrupt the SP register in compressed/head.S
2007-06-05[ARM] pxa: fix pxa27x keyboard driverRussell King
CKEN macro definitions no longer contains the bit number; remove it from usages in the pxa27x keyboard driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: reduce raciness when input handlers disconnect Input: ucb1x00 - do not access input_dev->private directly Input: logips2pp - fix typo in Kconfig Input: db9 - do not ignore dev2 module parameter
2007-06-03Input: reduce raciness when input handlers disconnectDmitry Torokhov
There is a race between input handler's release() and disconnect() methods: when input handler disconnects it wakes up all regular users and then process to walk user list to wake up async. users. While disconnect() walks the list release() removes elements of the same list causing oopses. While this is not a substibute for proper locking we can reduce odds of getting an oops if we wake up normal readers after walking the list. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-30[ARM] Fix some section mismatch warningsRussell King
The following patch fixes these section mismatch warnings: WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state') WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions') WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit') WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info') WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event') WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted') Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-28Input: logips2pp - fix typo in KconfigUwe Bugla
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-28Input: db9 - do not ignore dev2 module parameterDmitry Torokhov
Because of incorrect parameter setup anything passed in dev2=... was always ignored by the driver. See bugzilla #8541. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - SPI_CPHA mode bugfix Input: ads7846 - document that it handles tsc2046 too Input: input-polldev - add module info Input: ucb1x00-ts - remove commented out code Input: ucb1400_ts - use sched_setscheduler() Input: ALPS - force stream mode Input: iforce - minor clean-ups Input: iforce - fix force feedback not working Input: adbhid - do not access input_dev->private directly Input: logips2pp - add type 72 (PS/2 TrackMan Marble)
2007-05-22Input: ads7846 - SPI_CPHA mode bugfixSemih Hazar
In commit [1] the SPI mode is set to 1, but it should be 0. As stated in the commit, ads784x samples the data on the rising edge. SPI mode 1 samples on the falling edge [2] though. The root cause of this is a bug in the omap_uwire code, which treats CPHA=1 incorrectly; so these two bugs cancel each other out on one of the main regression test platforms for this driver. [1] kernel.org GIT 7937e86a70235e1584486654687dc9908a11e00a [2] http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ads7846 - document that it handles tsc2046 tooDavid Brownell
The TSC2046 is an updated version of the ADS7846 ... mention that in the Kconfig helptext and driver source. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: input-polldev - add module infoEric Piel
This is required to load it as a module, as GPL-compatible license is necessary to use workqueues. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ucb1400_ts - use sched_setscheduler()Satoru Takeuchi
Fix Philips UCB1400 driver to use sched_setscheduler() instead of setting the fields of task_struct directly. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: ALPS - force stream modeDmitry Torokhov
ALPS appears to need SETSTREAM command after reset, otherwise it does not produce any data. Now that we do not request stream mode by default individual drivers need to take care of it. [Jason Riedy <ejr@cs.berkeley.edu> - fix oops] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: iforce - minor clean-upsJohann Deneux
Signed-off-by: Johann Deneux <johann.deneux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Input: iforce - fix force feedback not workingJohann Deneux
Use an interrupt URB to send force-feedback data to the device instead of a bulk URB. This was broken since 2.6.18. Signed-off-by: Johann Deneux <johann.deneux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-05-22Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix dreamcast build for IRQ changes. sh: Fix clock multiplier on SH7722. sh: Wire up kdump crash kernel exec in die(). sh: sr.bl toggling around idle sleep. sh: disable genrtc support. fs: Kill sh dependency for binfmt_flat. sh: Disable psw support for R7785RP. sh: Fix page size alignment in __copy_user_page(). sh: Fix up various compile warnings for SE boards. sh: Wire up signalfd/timerfd/eventfd syscalls. sh: revert addition of page fault notifiers spelling fixes: arch/sh/ input: hp680_ts compile fixes. sh: landisk: Header cleanups. sh: landisk: rtc-rs5c313 support. sh: Kill off pmb slab cache destructor. sh: Fix up psw build rules for r7780rp. sh: Shut up compiler warnings in __do_page_fault().
2007-05-15missing dependencies for USB drivers in inputAl Viro
stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-14input: hp680_ts compile fixes.Kristoffer Ericson
Trivial fix to follow the DECLARE_WORK changes, this makes the HD64461 touchscreen driver work properly again. As pointed out by David Howells. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-11Input: evdev - fix overflow in compat_ioctlKenichi Nagai
When exporting input device bitmaps via compat_ioctl on BIG_ENDIAN platforms evdev calculates data size incorrectly. This causes buffer overflow if user specifies buffer smaller than maxlen. Signed-off-by: Kenichi Nagai <kenichi3.nagai@toshiba.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-10Fix ixp4xx compile errorFrederik Deweerdt
drivers/input/misc/ixp4xx-beeper.c: In function 'ixp4xx_spkr_event': drivers/input/misc/ixp4xx-beeper.c:54: error: 'input_dev' undeclared (first use in this function) drivers/input/misc/ixp4xx-beeper.c:54: error: (Each undeclared identifier is reported only once drivers/input/misc/ixp4xx-beeper.c:54: error: for each function it appears in.) Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>