aboutsummaryrefslogtreecommitdiff
path: root/drivers/isdn/hisax
AgeCommit message (Collapse)Author
2008-11-30tricky one: hisax sectionsAl Viro
a) hisax_init_pcmcia() needs to be defined only if we have CONFIG_HOTPLUG (no PCMCIA support otherwise) and can be declared __devinit. b) HiSax_inithardware() can go __init c) hisax_register() is passing to checkcard() full-blown hisax_cs_setup_card(): checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card); The problem with it is that * hisax_cs_setup_card() is __devinit * hisax_register() is not * hisax_cs_setup_card() is a switch from hell, calling a lot of setup_some_weirdcard() depending on card->typ. _These_ are also __devinit. However, in hisax_register() we have card->typ equal to ISDN_CTYPE_DYNAMIC, which reduces hisax_cs_setup_card() to "nevermind all that crap, just do nothing and return 2". So we add a trimmed-down callback doing just that and passed to checkcard() by hisax_register(). _This_ is non-init (we can stand the impact on .text size). Voila - no section warnings from drivers/isdn Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23pcmcia: deprecate CS_SUCCESSDominik Brodowski
Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: pcmcia_config_loop() improvement by passing vccDominik Brodowski
By passing the current Vcc setting to the pcmcia_config_loop callback function, we can remove pcmcia_get_configuration_info() calls from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: pcmcia_config_loop() default CIS entry handlingDominik Brodowski
Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: pcmcia_config_loop() ConfigIndex unificationDominik Brodowski
Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in the pcmcia_config_loop() callback function. Therefore, factor it out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: use pcmcia_loop_config in ISDN pcmcia driversDominik Brodowski
Use the config loop helper in ISDN pcmcia drivers. CC: Karsten Keil <kkeil@suse.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-26pnp: fix the fcpnp_driver declaration to only exist if CONFIG_PNP=yDavid Howells
Fix the fcpnp_driver declaration to only exist if CONFIG_PNP=y as it's only accessed in that case. The PNP=n variant was added by 30d55e71a81b1f5a8136f191dc9f4c21f18e77e6 ("hisax: depend on CONFIG_PNP, not __ISAPNP__") Fixes an unused variable warning. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Rename WARN() to WARNING() to clear the namespaceArjan van de Ven
We want to use WARN() as a variant of WARN_ON(), however a few drivers are using WARN() internally. This patch renames these to WARNING() to avoid the namespace clash. A few cases were defining but not using the thing, for those cases I just deleted the definition. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Greg KH <greg@kroah.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28hisax: depend on CONFIG_PNP, not __ISAPNP__Bjorn Helgaas
The PNP driver interfaces depend on CONFIG_PNP, so test that rather than __ISAPNP__. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28isdn: fix obvious cut-and-paste error in st5481_usb.cRobert P. J. Day
Fix a rather obvious cut-and-paste error, where earlier code for the controller URB got somehow mixed in with code for the interrupt URB. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28isdn: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21Merge branch 'irq-cleanups-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'irq-cleanups-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] minor irq handler cleanups drivers/char: minor irq handler cleanups [PPC] minor irq handler cleanups [BLACKFIN] minor irq handler cleanups [SPARC] minor irq handler cleanups ARM minor irq handler cleanup: avoid passing unused info to irq
2008-04-20[ISDN] minor irq handler cleanupsJeff Garzik
- reference irq number in CardState structure - remove now-unused 'intno' argument from rs_interrupt_elsa() - cs->irq_func() should be defined using standard irq_handler_t - add KERN_DEBUG to printk() where appropriate Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-20[ISDN] Hisax: eliminate many unnecessary references to CardType[]Jeff Garzik
For the vast majority of CardType[card->typ] uses (but not all!), the string is constant for each driver. Therefore, we may replace CardType[card->typ] with the actual string describing the driver, making each printk() a bit more simple. This also has the nice, intended side effect of greatly reducing external references to hisax global CardType[]. This will be of value once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-20[ISDN] HiSax: modularization prepJeff Garzik
Pass a function pointer into the core HiSax probe function checkcard(), in order to facilitate modular drivers passing in their own setup routines. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-03-04hisax_fcpcipnp: move request_irq later in probeKyle McMartin
After a quick glance at the code, we're getting the DEBUG_SHIRQ spurious interrupt before we have the adapter template filled in. Real interrupts appear to be turned on by fcpci*_init(), so move request_irq until just before that. Signed-off-by: Kyle McMartin <kmcmartin@redhat.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09isdn: fix section mismatch warning for ISACVerSam Ravnborg
Fix following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x19723): Section mismatch in reference from the function ISACVersion() to the variable .devinit.data:ISACVer WARNING: drivers/isdn/hisax/built-in.o(.text+0x2005b): Section mismatch in reference from the function setup_avm_a1_pcmcia() to the function .devinit.text:setup_isac() ISACVer were only used from function annotated __devinit so add same annotation to ISACVer. One af the fererencing functions missed __devinit so add it and kill an additional warning. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09isdn: fix section mismatch warnings from hisax_cs_setup_cardSam Ravnborg
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x722): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_teles3() WARNING: drivers/isdn/hisax/built-in.o(.text+0x72c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_s0box() WARNING: drivers/isdn/hisax/built-in.o(.text+0x736): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_telespci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x747): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_avm_pcipnp() WARNING: drivers/isdn/hisax/built-in.o(.text+0x74e): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_elsa() WARNING: drivers/isdn/hisax/built-in.o(.text+0x755): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_diva() WARNING: drivers/isdn/hisax/built-in.o(.text+0x75c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sedlbauer() WARNING: drivers/isdn/hisax/built-in.o(.text+0x763): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_s() WARNING: drivers/isdn/hisax/built-in.o(.text+0x76a): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcpci() WARNING: drivers/isdn/hisax/built-in.o(.text+0x771): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcsx() WARNING: drivers/isdn/hisax/built-in.o(.text+0x778): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_niccy() WARNING: drivers/isdn/hisax/built-in.o(.text+0x77f): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_bkm_a4t() WARNING: drivers/isdn/hisax/built-in.o(.text+0x786): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sct_quadro() WARNING: drivers/isdn/hisax/built-in.o(.text+0x78d): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_gazel() WARNING: drivers/isdn/hisax/built-in.o(.text+0x794): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_w6692() WARNING: drivers/isdn/hisax/built-in.o(.text+0x79b): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_u() WARNING: drivers/isdn/hisax/built-in.o(.text+0x7a2): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_enternow_pci() checkcard() are the only user of hisax_cs_setup_card(). And checkcard is only used during init or when hot plugging ISDN devices. So annotate hisax_cs_setup_card() with __devinit. checkcard() is used by exported functions so it cannot be annotated __devinit. Annotate it with __ref so modpost ignore references to _devinit section. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09isdn: fix section mismatch warnings in isac.c and isar.cSam Ravnborg
Fix the following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b276): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b286): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x1fec7): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21669): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x21671): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2991e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x29936): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2993e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisar() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e026): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e02e): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:initisac() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37813): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:clear_pending_isac_ints() WARNING: drivers/isdn/hisax/built-in.o(.text+0x37823): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:initisac() initisar(), initisac() and clear_pending_isac_ints() were all used via a cardmsg fnction - which may be called ouside __devinit context. So remove the bogus __devinit annotation of the above three functions to fix the warnings. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-09isdn: fix section mismatch warning in hfc_sx.cSam Ravnborg
Fix the following warning: WARNING: drivers/isdn/hisax/built-in.o(.text+0x35818): Section mismatch in reference from the function hfcsx_card_msg() to the function .devinit.text:inithfcsx() hfcsx_card_msg() may be called outside __devinit context. Following the program logic is looks like the CARD_INIT branch will only be taken under __devinit context but to be consistent remove the __devinit annotation of inithfcsx() so we do not mix non-__devinit and __devinit code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-07[ISDN]: fix section mismatch warning in enpci_card_msgSam Ravnborg
Fix following warnings: WARNING: drivers/isdn/hisax/built-in.o(.text+0x3cf50): Section mismatch in reference from the function enpci_card_msg() to the function .devinit.text:Amd7930_init() WARNING: drivers/isdn/hisax/built-in.o(.text+0x3cf85): Section mismatch in reference from the function enpci_card_msg() to the function .devinit.text:Amd7930_init() enpci_card_msg() can be called outside __devinit context referenced function should not be annotated __devinit. Remove annotation of Amd7930_init to fix this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-06cleanup after APUS removalAdrian Bunk
After the APUS removal, some code can be removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29isdn: bootup crash fixIngo Molnar
got this HiSax bootup crash on a "make randconfig" bzImage bootup: Calling initcall 0xc0bb1320: HiSax_init+0x0/0x380() HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (kernel) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: HFC-S driver Rev. 1.10.2.4 HFCS: defined at 0x500 IRQ 5 HZ 250 Teles 16.3c: IRQ 5 count 0 HFCS: resetting card Teles 16.3c: IRQ 5 count 0 Teles 16.3c: IRQ(5) getting no interrupts during init 1 HFCS: resetting card ------------[ cut here ]------------ kernel BUG at include/linux/timer.h:145! invalid opcode: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.24-rc3 #2045) EIP: 0060:[<c063afbf>] EFLAGS: 00010286 CPU: 0 EIP is at hfcs_card_msg+0x15f/0x180 EAX: c0cf2e5c EBX: 000000f2 ECX: 00000000 EDX: ffff1193 ESI: f76e8000 EDI: f76e8000 EBP: f7c23ec4 ESP: f7c23eac DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f7c22000 task=f7c0e000 task.ti=f7c22000) Stack: 00000000 f7c23ec4 c011703b 00000002 f76e8000 00000000 f7c23ef8 c060c3e5 c0a7c9c0 c0a315dc 00000005 00000001 00000000 f7c23f34 00000000 c0b5c9c0 f7c23f34 00000000 c0f5a8e0 f7c23f80 c0bb154f 00000000 00000001 c0a9b5b9 Call Trace: [<c010339a>] show_trace_log_lvl+0x1a/0x40 [<c0103469>] show_stack_log_lvl+0xa9/0xe0 [<c010355f>] show_registers+0xbf/0x200 [<c01037a4>] die+0x104/0x220 [<c0103943>] do_trap+0x83/0xc0 [<c0103ca8>] do_invalid_op+0x88/0xa0 [<c083621a>] error_code+0x6a/0x70 [<c060c3e5>] checkcard+0x4a5/0x620 [<c0bb154f>] HiSax_init+0x22f/0x380 [<c0b867b7>] kernel_init+0x97/0x2a0 [<c0102f87>] kernel_thread_helper+0x7/0x20 ======================= Code: e8 43 ae ff 8b 57 3c 85 d2 0f 84 ef fe ff ff b8 a0 99 ad c0 b9 02 00 00 00 e8 ce 11 ae ff 83 c4 0c b8 00 00 00 00 5b 5e 5f c9 c3 <0f> 0b eb fe 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 EIP: [<c063afbf>] hfcs_card_msg+0x15f/0x180 SS:ESP 0068:f7c23eac Kernel panic - not syncing: Attempted to kill init! The box has no HiSax card installed. the reason for the crash is add_timer() done on an already running timer. This happens because for some reason CARD_INIT is called twice. this patch works this problem around by using mod_timer() - this gets a booting system - but it would be nice to figure out why CARD_INIT is done twice. the ISDN config section (generated via make randconfig) is this: # # ISDN feature submodules # # CONFIG_ISDN_DRV_LOOP is not set CONFIG_ISDN_DIVERSION=y # # ISDN4Linux hardware drivers # # # Passive cards # CONFIG_ISDN_DRV_HISAX=y # # D-channel protocol features # CONFIG_HISAX_EURO=y CONFIG_DE_AOC=y # CONFIG_HISAX_NO_SENDCOMPLETE is not set # CONFIG_HISAX_NO_LLC is not set # CONFIG_HISAX_NO_KEYPAD is not set CONFIG_HISAX_1TR6=y CONFIG_HISAX_NI1=y CONFIG_HISAX_MAX_CARDS=8 # # HiSax supported cards # CONFIG_HISAX_16_0=y # CONFIG_HISAX_16_3 is not set # CONFIG_HISAX_TELESPCI is not set CONFIG_HISAX_S0BOX=y # CONFIG_HISAX_AVM_A1 is not set CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_IX1MICROR2=y CONFIG_HISAX_DIEHLDIVA=y # CONFIG_HISAX_ASUSCOM is not set # CONFIG_HISAX_TELEINT is not set CONFIG_HISAX_HFCS=y # CONFIG_HISAX_SEDLBAUER is not set CONFIG_HISAX_SPORTSTER=y # CONFIG_HISAX_MIC is not set # CONFIG_HISAX_NETJET is not set # CONFIG_HISAX_NETJET_U is not set # CONFIG_HISAX_NICCY is not set # CONFIG_HISAX_ISURF is not set # CONFIG_HISAX_HSTSAPHIR is not set # CONFIG_HISAX_BKM_A4T is not set # CONFIG_HISAX_SCT_QUADRO is not set # CONFIG_HISAX_GAZEL is not set # CONFIG_HISAX_HFC_PCI is not set # CONFIG_HISAX_W6692 is not set # CONFIG_HISAX_HFC_SX is not set # CONFIG_HISAX_DEBUG is not set # # HiSax PCMCIA card service modules # # # HiSax sub driver modules # CONFIG_HISAX_ST5481=y CONFIG_HISAX_HFCUSB=y # CONFIG_HISAX_HFC4S8S is not set CONFIG_HISAX_FRITZ_PCIPNP=y CONFIG_HISAX_HDLC=y # # Active cards # CONFIG_ISDN_DRV_ICN=m CONFIG_ISDN_DRV_PCBIT=m CONFIG_ISDN_DRV_SC=y # CONFIG_ISDN_DRV_ACT2000 is not set CONFIG_HYSDN=m # CONFIG_ISDN_DRV_GIGASET is not set # CONFIG_ISDN_CAPI is not set CONFIG_PHONE=y CONFIG_PHONE_IXJ=m Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Karsten Keil <kkeil@suse.de> Cc: Kai Germaschewski <kai@germaschewski.name> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05i4l: errors with assignments in ifRoel Kluin
Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05PCI: Add Kconfig option to disable deprecated pci_find_* APIJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-14hisax: hfc_usb: update to current CVS versionMartin Bachem
- killed paranoid NULL Pointer check - human readable LED states - support for "Eicon DIVA USB 4.0" (0x071d/0x1005) Signed-off-by: Martin Bachem <info@colognechip.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14more trivial signedness fixes in driversAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14long vs. unsigned long - low-hanging fruits in driversAl Viro
deal with signedness of the stuff passed to set_bit() et.al. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13fallout from elsa setup splitAl Viro
... and yes, caller wants it to return int. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[ISDN] HiSax diva: split setup into three smaller functionsJeff Garzik
Just code movement, and the glue to call the new functions. Preparation for hotplug APIs. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-12[ISDN] HiSax sedlbauer: move ISAPNP and PCI code into functions of their ownJeff Garzik
Prep for hotplug API conversion. Just code movement (+glue). Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-12[ISDN] HiSax elsa: split huge setup function into four smaller functionsJeff Garzik
Prep for hotplug API conversion. Just code movement (+glue). Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-12[ISDN] HiSax avm_pci: split setup into three smaller functionsJeff Garzik
Preparation for new ISA/PNP/PCI APIs. Just code movement, and the glue to call the new functions. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-12[ISDN] Remove CONFIG_PCI ifdefs from 100% PCI source codeJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-21hisax: update hfc_usb driverMartin Bachem
This fixes handling of USB ISO completion error -EXDEV and includes several other changes to current CVS version at isdn4linux.de (changes in debug flags, style of code remarks, etc) Signed-off-by: Martin Bachem <info@colognechip.com> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21Use menuconfig objects - CONFIG_ISDN_I4LTilman Schmidt
Remove a menu statement and several dependencies from the Kconfig files in the drivers/isdn tree as they have become unnecessary by the transformation of CONFIG_ISDN from "menu, config" into "menuconfig". (Modified version of a patch originally proposed by Jan Engelhardt.) Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Jan Engelhardt <jengelh@computergmbh.de> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18ISDN HiSax: uninitialized return in hisax_cs_setupFlorin Malita
Coverity (1792) spotted a possibly uninitialized return value in case of kmalloc() failure: 1116 static int hisax_cs_setup(int cardnr, struct IsdnCard *card, 1117 struct IsdnCardState *cs) 1119 int ret; 1120 1121 if (!(cs->rcvbuf = kmalloc(MAX_DFRAME_LEN_L1, GFP_ATOMIC))) { 1122 printk(KERN_WARNING "HiSax: No memory for isac rcvbuf\n"); 1123 ll_unload(cs); 1124 goto outf_cs; ... 1165 outf_cs: 1166 kfree(cs); 1167 card->cs = NULL; 1168 return ret; The straightforward solution would be to just add the missing initialization but hardcoding the return value in the out_cs branch (only taken on failure) seems to work just as well and it allows killing a couple of other lines too. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17[ISDN] HiSax hfc_pci: minor cleanupsJeff Garzik
* trim trailing whitespace * remove CONFIG_PCI ifdefs, this driver is always PCI (Kconfig enforced) * remove return statements at the tail of a function * remove indentation levels by returning an error code immediately. Makes the code much more readable, and easier to update to PCI hotplug API. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17[ISDN] HiSax bkm_a4t: split setup into two smaller functionsJeff Garzik
No behavior changes, just code movement. Prep for PCI hotplug API. Well, CONFIG_PCI useless ifdef was removed. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17[ISDN] HiSax enternow: split setup into 3 smaller functionsJeff Garzik
No behavior changes, just code movement. Prep for PCI hotplug API. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17[ISDN] HiSax netjet_u: split setup into 3 smaller functionsJeff Garzik
No behavior changes, just code movement. Prep for PCI hotplug API. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17[ISDN] HiSax netjet_s: code movement, prep for hotplugJeff Garzik
1) Remove CONFIG_PCI ifdefs. PCI is required in Kconfig. 2) Break up setup_netjet_s() into three separate internal functions. This helps facilitate upcoming use of PCI hotplug API, and in addition makes the code much easier to follow. No code is changed, just moved around. I even kept the out-of-favor "return(0)" style used in the current source code. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17[ISDN] HiSax: move card state alloc/setup code into separate functionsJeff Garzik
Just code movement. No code changes or cleanups besides that which is required to call the new functions from the old code site. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17[ISDN] HiSax: move card setup into separate functionJeff Garzik
No behavior changes, just code movement. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-17sane irq initialization in sedlbauer hisaxKarsten Keil
The interrupts schould be disabled until the driver is ready and the IRQ function was registered. Thanks to Bastian Friedrich and Thomas Voegtle for spotting this. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Bastian Friedrich <bastian@bastian-friedrich.de> Signed-off-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Mismatching declarations of revision strings in HiSaxDavid Woodhouse
The {l1,l2,l3,lli,tei}_revision strings in the HiSax driver are 'const', but have a mismatching declaration as 'extern char *' in config.c. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-11PCI: Change all drivers to use pci_device->revisionAuke Kok
Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-23HiSax: fix error checking for hisax_register()]Alan Stern
This patch (as875) adds error-checking to the callers of hisax_register(). It also changes an error pathway in that routine, making it return an error code rather than 0. This fixes Bugzilla #7960. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Karsten Keil <kkeil@suse.de> Cc: Martin Bachem <info@colognechip.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Fix occurrences of "the the "Michael Opdenacker
Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>