aboutsummaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)Author
2009-12-01md: revert incorrect fix for read error handling in raid1.NeilBrown
commit 4706b349f was a forward port of a fix that was needed for SLES10. But in fact it is not needed in mainline because the earlier commit dd00a99e7a fixes the same problem in a better way. Further, this commit introduces a bug in the way it interacts with the automatic read-error-correction. If, after a read error is successfully corrected, the same disk is chosen to re-read - the re-read won't be attempted but an error will be returned instead. After reverting that commit, there is the possibility that a read error on a read-only array (where read errors cannot be corrected as that requires a write) will repeatedly read the same device and continue to get an error. So in the "Array is readonly" case, fail the drive immediately on a read error. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2009-11-13md/raid5: Allow dirty-degraded arrays to be assembled when only party is ↵NeilBrown
degraded. Normally is it not safe to allow a raid5 that is both dirty and degraded to be assembled without explicit request from that admin, as it can cause hidden data corruption. This is because 'dirty' means that the parity cannot be trusted, and 'degraded' means that the parity needs to be used. However, if the device that is missing contains only parity, then there is no issue and assembly can continue. This particularly applies when a RAID5 is being converted to a RAID6 and there is an unclean shutdown while the conversion is happening. So check for whether the degraded space only contains parity, and in that case, allow the assembly. Signed-off-by: NeilBrown <neilb@suse.de>
2009-11-13Don't unconditionally set in_sync on newly added device in raid5_reshapeNeilBrown
When a reshape finds that it can add spare devices into the array, those devices might already be 'in_sync' if they are beyond the old size of the array, or they might not if they are within the array. The first case happens when we change an N-drive RAID5 to an N+1-drive RAID5. The second happens when we convert an N-drive RAID5 to an N+1-drive RAID6. So set the flag more carefully. Also, ->recovery_offset is only meaningful when the flag is clear, so only set it in that case. This change needs the preceding two to ensure that the non-in_sync device doesn't get evicted from the array when it is stopped, in the case where v0.90 metadata is used. Signed-off-by: NeilBrown <neilb@suse.de>
2009-11-13md: allow v0.91 metadata to record devices as being active but not in-sync.NeilBrown
This is a combination that didn't really make sense before. However when a reshape is converting e.g. raid5 -> raid6, the extra device is not fully in-sync, but is certainly active and contains important data. So allow that start to be meaningful and in particular get the 'recovery_offset' value (which is needed for any non-in-sync active device) from the reshape_position. Signed-off-by: NeilBrown <neilb@suse.de>
2009-11-12md: factor out updating of 'recovery_offset'.NeilBrown
Each device has its own 'recovery_offset' showing how far recovery has progressed on the device. As the only real significance of this is that fact that it can be stored in the metadata and recovered at restart, and as only 1.x metadata can do this, we were only updating 'recovery_offset' to 'curr_resync_completed' when updating v1.x metadata. But this is wrong, and we will shortly make limited use of this field in v0.90 metadata. So move the update into common code. Signed-off-by: NeilBrown <neilb@suse.de>
2009-11-06md/raid5: make sure curr_sync_completes is uptodate when reshape startsNeilBrown
This value is visible through sysfs and is used by mdadm when it manages a reshape (backing up data that is about to be rearranged). So it is important that it is always correct. Current it does not get updated properly when a reshape starts which can cause problems when assembling an array that is in the middle of being reshaped. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-11-06md: don't clear endpoint for resync when resync is interrupted.NeilBrown
If a 'sync_max' has been set (via sysfs), it is wrong to clear it until a resync (or reshape or recovery ...) actually reached that point. So if a resync is interrupted (e.g. by device failure), leave 'resync_max' unchanged. This is particularly important for 'reshape' operations that do not change the size of the array. For such operations mdadm needs to monitor the reshape taking rolling backups of the section being reshaped. If resync_max gets cleared, the reshape can get ahead of mdadm and then the backups that mdadm creates are useless. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-31Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: async_tx: fix asynchronous raid6 recovery for ddf layouts async_pq: rename scribble page async_pq: kill a stray dma_map() call and other cleanups md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning raid6/async_tx: handle holes in block list in async_syndrome_val md/async: don't pass a memory pointer as a page pointer. md: Fix handling of raid5 array which is being reshaped to fewer devices. md: fix problems with RAID6 calculations for DDF. md/raid456: downlevel multicore operations to raid_run_ops md: drivers/md/unroll.pl replaced with awk analog md: remove clumsy usage of do_sync_mapping_range from bitmap code md: raid1/raid10: handle allocation errors during array setup. md/raid5: initialize conf->device_lock earlier md/raid1/raid10: add a cond_resched Revert "md: do not progress the resync process if the stripe was blocked"
2009-10-19md/raid6: kill a gcc-4.0.1 'uninitialized variable' warningDan Williams
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-10-16dm snapshot: allow chunk size to be less than page sizeMikulas Patocka
Allow the snapshot chunk size to be smaller than the page size The code is now capable of handling this due to some previous fixes and enhancements. As the page size varies between computers, prior to this patch, the chunk size of a snapshot dictated which machines could read it: Snapshots created on one machine might not be readable on another. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm snapshot: use unsigned integer chunk sizeMikulas Patocka
Use unsigned integer chunk size. Maximum chunk size is 512kB, there won't ever be need to use 4GB chunk size, so the number can be 32-bit. This fixes compiler failure on 32-bit systems with large block devices. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm snapshot: lock snapshot while supplying statusMikulas Patocka
This patch locks the snapshot when returning status. It fixes a race when it could return an invalid number of free chunks if someone was simultaneously modifying it. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm exception store: fix failed set_chunk_size error pathMikulas Patocka
Properly close the device if failing because of an invalid chunk size. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm snapshot: require non zero chunk size by end of ctrMikulas Patocka
If we are creating snapshot with memory-stored exception store, fail if the user didn't specify chunk size. Zero chunk size would probably crash a lot of places in the rest of snapshot code. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm: dec_pending needs locking to save error valueKiyoshi Ueda
Multiple instances of dec_pending() can run concurrently so a lock is needed when it saves the first error code. I have never experienced actual problem without locking and just found this during code inspection while implementing the barrier support patch for request-based dm. This patch adds the locking. I've done compile, boot and basic I/O testings. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm: add missing del_gendisk to alloc_dev error pathZdenek Kabelac
Add missing del_gendisk() to error path when creation of workqueue fails. Otherwice there is a resource leak and following warning is shown: WARNING: at fs/sysfs/dir.c:487 sysfs_add_one+0xc5/0x160() sysfs: cannot create duplicate filename '/devices/virtual/block/dm-0' Cc: stable@kernel.org Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm log: userspace fix incorrect luid cast in userspace_ctrAndrew Morton
mips: drivers/md/dm-log-userspace-base.c: In function `userspace_ctr': drivers/md/dm-log-userspace-base.c:159: warning: cast from pointer to integer of different size Cc: stable@kernel.org Cc: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm snapshot: free exception store on init failureJonathan Brassow
While initializing the snapshot module, if we fail to register the snapshot target then we must back-out the exception store module initialization. Cc: stable@kernel.org Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16dm snapshot: sort by chunk size to fix raceMikulas Patocka
Avoid a race causing corruption when snapshots of the same origin have different chunk sizes by sorting the internal list of snapshots by chunk size, largest first. https://bugzilla.redhat.com/show_bug.cgi?id=182659 For example, let's have two snapshots with different chunk sizes. The first snapshot (1) has small chunk size and the second snapshot (2) has large chunk size. Let's have chunks A, B, C in these snapshots: snapshot1: ====A==== ====B==== snapshot2: ==========C========== (Chunk size is a power of 2. Chunks are aligned.) A write to the origin at a position within A and C comes along. It triggers reallocation of A, then reallocation of C and links them together using A as the 'primary' exception. Then another write to the origin comes along at a position within B and C. It creates pending exception for B. C already has a reallocation in progress and it already has a primary exception (A), so nothing is done to it: B and C are not linked. If the reallocation of B finishes before the reallocation of C, because there is no link with the pending exception for C it does not know to wait for it and, the second write is dispatched to the origin and causes data corruption in the chunk C in snapshot2. To avoid this situation, we maintain snapshots sorted in descending order of chunk size. This leads to a guaranteed ordering on the links between the pending exceptions and avoids the problem explained above - both A and B now get linked to C. Cc: stable@kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-10-16md/async: don't pass a memory pointer as a page pointer.NeilBrown
md/raid6 passes a list of 'struct page *' to the async_tx routines, which then either DMA map them for offload, or take the page_address for CPU based calculations. For RAID6 we sometime leave 'blanks' in the list of pages. For CPU based calcs, we want to treat theses as a page of zeros. For offloaded calculations, we simply don't pass a page to the hardware. Currently the 'blanks' are encoded as a pointer to raid6_empty_zero_page. This is a 4096 byte memory region, not a 'struct page'. This is mostly handled correctly but is rather ugly. So change the code to pass and expect a NULL pointer for the blanks. When taking page_address of a page, we need to check for a NULL and in that case use raid6_empty_zero_page. Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md: Fix handling of raid5 array which is being reshaped to fewer devices.NeilBrown
When a raid5 (or raid6) array is being reshaped to have fewer devices, conf->raid_disks is the latter and hence smaller number of devices. However sometimes we want to use a number which is the total number of currently required devices - the larger of the 'old' and 'new' sizes. Before we implemented reducing the number of devices, this was always 'new' i.e. ->raid_disks. Now we need max(raid_disks, previous_raid_disks) in those places. This particularly affects assembling an array that was shutdown while in the middle of a reshape to fewer devices. md.c needs a similar fix when interpreting the md metadata. Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md: fix problems with RAID6 calculations for DDF.NeilBrown
Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md/raid456: downlevel multicore operations to raid_run_opsDan Williams
The percpu conversion allowed a straightforward handoff of stripe processing to the async subsytem that initially showed some modest gains (+4%). However, this model is too simplistic and leads to stripes bouncing between raid5d and the async thread pool for every invocation of handle_stripe(). As reported by Holger this can fall into a pathological situation severely impacting throughput (6x performance loss). By downleveling the parallelism to raid_run_ops the pathological stripe_head bouncing is eliminated. This version still exhibits an average 11% throughput loss for: mdadm --create /dev/md0 /dev/sd[b-q] -n 16 -l 6 echo 1024 > /sys/block/md0/md/stripe_cache_size dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 ...but the results are at least stable and can be used as a base for further multicore experimentation. Reported-by: Holger Kiehl <Holger.Kiehl@dwd.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md: drivers/md/unroll.pl replaced with awk analogVladimir Dronnikov
drivers/md/unroll.pl replaced by awk script to drop build-time dependency on perl Signed-off-by: Vladimir Dronnikov <dronnikov@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md: remove clumsy usage of do_sync_mapping_range from bitmap codeNeilBrown
and replace with vfs_fsync which is much neater (but wasn't exported, or even in existence at the time the code was written). Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md: raid1/raid10: handle allocation errors during array setup.NeilBrown
Both raid1 and raid10 create a mempool during startup. If the 'alloc' function for this mempool fails, unplug_slaves is called. If that happens when the pool is being initialised, unplug_slaves will try to use the 'conf' structure that isn't filled in yet, and badness will happen. So ensure that unplug_slaves doesn't get called unless we know that the conf structure if fully initialised. Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md/raid5: initialize conf->device_lock earlierDan Williams
Deallocating a raid5_conf_t structure requires taking 'device_lock'. Ensure it is initialized before it is used, i.e. initialize the lock before attempting any further initializations that might fail. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16md/raid1/raid10: add a cond_reschedNeilBrown
During 'check' of a raid1 or raid10 it is possible for the management thread to spend a lot of time running 'memcmp' on blocks from different devices, so make sure the thread has a chance to schedule. raid5d already has a cond_resched (in process_stripe). Reported-By: Lee Howard <faxguy@howardsilvan.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-16Revert "md: do not progress the resync process if the stripe was blocked"NeilBrown
This reverts commit df10cfbc4d7ab93260d997df754219d390d62a9d. This patch was based on a misunderstanding and risks introducing a busy-wait loop. So revert it. Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-10-06block: Seperate read and write statistics of in_flight requests v2Nikanth Karthikesan
Commit a9327cac440be4d8333bba975cbbf76045096275 added seperate read and write statistics of in_flight requests. And exported the number of read and write requests in progress seperately through sysfs. But Corrado Zoccolo <czoccolo@gmail.com> reported getting strange output from "iostat -kx 2". Global values for service time and utilization were garbage. For interval values, utilization was always 100%, and service time is higher than normal. So this was reverted by commit 0f78ab9899e9d6acb09d5465def618704255963b The problem was in part_round_stats_single(), I missed the following: if (now == part->stamp) return; - if (part->in_flight) { + if (part_in_flight(part)) { __part_stat_add(cpu, part, time_in_queue, part_in_flight(part) * (now - part->stamp)); __part_stat_add(cpu, part, io_ticks, (now - part->stamp)); With this chunk included, the reported regression gets fixed. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> -- Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-04Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits) Revert "Seperate read and write statistics of in_flight requests" cfq-iosched: don't delay async queue if it hasn't dispatched at all block: Topology ioctls cfq-iosched: use assigned slice sync value, not default cfq-iosched: rename 'desktop' sysfs entry to 'low_latency' cfq-iosched: implement slower async initiate and queue ramp up cfq-iosched: delay async IO dispatch, if sync IO was just done cfq-iosched: add a knob for desktop interactiveness Add a tracepoint for block request remapping block: allow large discard requests block: use normal I/O path for discard requests swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL fs/bio.c: move EXPORT* macros to line after function Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs cciss: fix build when !PROC_FS block: Do not clamp max_hw_sectors for stacking devices block: Set max_sectors correctly for stacking devices cciss: cciss_host_attr_groups should be const cciss: Dynamically allocate the drive_info_struct for each logical drive. cciss: Add usage_count attribute to each logical drive in /sys ...
2009-10-04Revert "Seperate read and write statistics of in_flight requests"Jens Axboe
This reverts commit a9327cac440be4d8333bba975cbbf76045096275. Corrado Zoccolo <czoccolo@gmail.com> reports: "with 2.6.32-rc1 I started getting the following strange output from "iostat -kx 2": Linux 2.6.31bisect (et2) 04/10/2009 _i686_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 10,70 0,00 3,16 15,75 0,00 70,38 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 18,22 0,00 0,67 0,01 14,77 0,02 43,94 0,01 10,53 39043915,03 2629219,87 sdb 60,89 9,68 50,79 3,04 1724,43 50,52 65,95 0,70 13,06 488437,47 2629219,87 avg-cpu: %user %nice %system %iowait %steal %idle 2,72 0,00 0,74 0,00 0,00 96,53 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 6,68 0,00 0,99 0,00 0,00 92,33 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 avg-cpu: %user %nice %system %iowait %steal %idle 4,40 0,00 0,73 1,47 0,00 93,40 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 100,00 sdb 0,00 4,00 0,00 3,00 0,00 28,00 18,67 0,06 19,50 333,33 100,00 Global values for service time and utilization are garbage. For interval values, utilization is always 100%, and service time is higher than normal. I bisected it down to: [a9327cac440be4d8333bba975cbbf76045096275] Seperate read and write statistics of in_flight requests and verified that reverting just that commit indeed solves the issue on 2.6.32-rc1." So until this is debugged, revert the bad commit. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-02dm/connector: Only process connector packages from privileged processesPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02connector/dm: Fixed a compilation warningPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-02connector: Provide the sender's credentials to the callbackPhilipp Reisner
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Acked-by: Lars Ellenberg <lars.ellenberg@linbit.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-23Merge branch 'next' of ↵NeilBrown
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into for-linus
2009-09-23md: raid-1/10: fix RW bits manipulationDmitry Monakhov
Recently Jens has changed bio_rw_flagged() logic by following commit 1f98a13f623e0ef666690a18c1250335fc6d7ef1. Now it returns bool instead of int. This broke raid1/raid10 RW bits manipulation logic. One of visible result is BUG_ON triggering due to empty barrier here scsi_lib.c:1108 scsi_setup_fs_cmnd() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23md: remove unnecessary memset from multipath.NeilBrown
Recent commit bbba809e96539672f775a3d70102657d05816a5b replaced mempool_create_kzalloc_pool with mempool_create_kmalloc_pool plus a memset. This memset is not needed (and we didn't need kzalloc in the first place). Ever field of the allocated structure (struct multipath_bh) is initialised immediately except retry_list, and memset does not initial a list_head anyway. To remove the memset. Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23md: report device as congested when suspendedNeilBrown
This should writeback from coming when the device is temporarily suspended. Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23md: Improve name of threads created by md_register_threadNeilBrown
The management thread for raid4,5,6 arrays are all called mdX_raid5, independent of the actual raid level, which is wrong and can be confusion. So change md_register_thread to use the name from the personality unless no alternate name (like 'resync' or 'reshape') is given. This is simpler and more correct. Cc: Jinzc <zhenchengjin@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23md: remove sparse warnings about lock context.NeilBrown
There was a real error here on a failure path where we incorrectly call rcu_read_unlock. Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23md: remove sparse waring "symbol xxx shadows an earlier one"NeilBrown
Rename some variable and remove some duplicate definitions to avoid there warnings. None of them are actual errors. Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
2009-09-22md: avoid use of broken kzalloc mempoolSage Weil
The kzalloc mempool does not re-zero items that have been used and then returned to the pool. Manually zero the allocated multipath_bh instead. Acked-by: Neil Brown <neilb@suse.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22const: make block_device_operations constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21trivial: fix typo "for for" in multiple filesAnand Gadiyar
trivial: fix typo "for for" in multiple files Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-19Driver-Core: extend devnode callbacks to provide permissionsKay Sievers
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-16md/raid6: cleanup ops_run_compute6_2Dan Williams
Neil says: "It is correct as it stands, but the fact that every branch in the 'if' part ends with a 'return' isn't immediately obvious, so it is clearer if we are explicit about the if / then / else structure." Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-16md/raid6: eliminate BUG_ON with side effectDan Williams
As pointed out by Neil it should be possible to build a driver with all BUG_ON statements deleted. It's bad form to have a BUG_ON with a side effect. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-14Merge branch 'for-2.6.32' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.32' of git://git.kernel.dk/linux-2.6-block: (29 commits) block: use blkdev_issue_discard in blk_ioctl_discard Make DISCARD_BARRIER and DISCARD_NOBARRIER writes instead of reads block: don't assume device has a request list backing in nr_requests store block: Optimal I/O limit wrapper cfq: choose a new next_req when a request is dispatched Seperate read and write statistics of in_flight requests aoe: end barrier bios with EOPNOTSUPP block: trace bio queueing trial only when it occurs block: enable rq CPU completion affinity by default cfq: fix the log message after dispatched a request block: use printk_once cciss: memory leak in cciss_init_one() splice: update mtime and atime on files block: make blk_iopoll_prep_sched() follow normal 0/1 return convention cfq-iosched: get rid of must_alloc flag block: use interrupts disabled version of raise_softirq_irqoff() block: fix comment in blk-iopoll.c block: adjust default budget for blk-iopoll block: fix long lines in block/blk-iopoll.c block: add blk-iopoll, a NAPI like approach for block devices ...