aboutsummaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)Author
2008-10-26Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: allow extended partitions on md devices. md: use sysfs_notify_dirent to notify changes to md/dev-xxx/state md: use sysfs_notify_dirent to notify changes to md/array_state
2008-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdevLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits) [PATCH] kill the rest of struct file propagation in block ioctls [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET [PATCH] get rid of blkdev_locked_ioctl() [PATCH] get rid of blkdev_driver_ioctl() [PATCH] sanitize blkdev_get() and friends [PATCH] remember mode of reiserfs journal [PATCH] propagate mode through swsusp_close() [PATCH] propagate mode through open_bdev_excl/close_bdev_excl [PATCH] pass fmode_t to blkdev_put() [PATCH] kill the unused bsize on the send side of /dev/loop [PATCH] trim file propagation in block/compat_ioctl.c [PATCH] end of methods switch: remove the old ones [PATCH] switch sr [PATCH] switch sd [PATCH] switch ide-scsi [PATCH] switch tape_block [PATCH] switch dcssblk [PATCH] switch dasd [PATCH] switch mtd_blkdevs [PATCH] switch mmc ...
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (46 commits) [PATCH] fs: add a sanity check in d_free [PATCH] i_version: remount support [patch] vfs: make security_inode_setattr() calling consistent [patch 1/3] FS_MBCACHE: don't needlessly make it built-in [PATCH] move executable checking into ->permission() [PATCH] fs/dcache.c: update comment of d_validate() [RFC PATCH] touch_mnt_namespace when the mount flags change [PATCH] reiserfs: add missing llseek method [PATCH] fix ->llseek for more directories [PATCH vfs-2.6 6/6] vfs: add LOOKUP_RENAME_TARGET intent [PATCH vfs-2.6 5/6] vfs: remove LOOKUP_PARENT from non LOOKUP_PARENT lookup [PATCH vfs-2.6 4/6] vfs: remove unnecessary fsnotify_d_instantiate() [PATCH vfs-2.6 3/6] vfs: add __d_instantiate() helper [PATCH vfs-2.6 2/6] vfs: add d_ancestor() [PATCH vfs-2.6 1/6] vfs: replace parent == dentry->d_parent by IS_ROOT() [PATCH] get rid of on-stack dentry in udf [PATCH 2/2] anondev: switch to IDA [PATCH 1/2] anondev: init IDR statically [JFFS2] Use d_splice_alias() not d_add() in jffs2_lookup() [PATCH] Optimise NFS readdir hack slightly. ...
2008-10-23[PATCH] dm: kill lookup_device wrapperChristoph Hellwig
Now that lookup_bdev is exported and used by dm just use it directly instead of through a trivial wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21dm: tidy local_initKiyoshi Ueda
This patch tidies local_init() in preparation for request-based dm. No functional change. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm: remove unused flush_allKiyoshi Ueda
This patch removes the DM_WQ_FLUSH_ALL state that is unnecessary. The dm_queue_flush(md, DM_WQ_FLUSH_ALL, NULL) in dm_suspend() is never invoked because: - 'goto flush_and_out' is the same as 'goto out' because the 'goto flush_and_out' is called only when '!noflush' - If r is non-zero, then the code above will invoke 'goto out' and skip this code. No functional change. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm raid1: separate region_hash interface part1Heinz Mauelshagen
Separate the region hash code from raid1 so it can be shared by forthcoming targets. Use BUG_ON() for failed async dm_io() calls. Signed-off-by: Heinz Mauelshagen <hjm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm: mark split bio as clonedMartin K. Petersen
When a bio gets split, mark its fragments with the BIO_CLONED flag. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm crypt: remove waitqueueMilan Broz
Remove waitqueue no longer needed with the async crypto interface. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm crypt: fix async splitMilan Broz
When writing io, dm-crypt has to allocate a new cloned bio and encrypt the data into newly-allocated pages attached to this bio. In rare cases, because of hw restrictions (e.g. physical segment limit) or memory pressure, sometimes more than one cloned bio has to be used, each processing a different fragment of the original. Currently there is one waitqueue which waits for one fragment to finish and continues processing the next fragment. But when using asynchronous crypto this doesn't work, because several fragments may be processed asynchronously or in parallel and there is only one crypt context that cannot be shared between the bio fragments. The result may be corruption of the data contained in the encrypted bio. The patch fixes this by allocating new dm_crypt_io structs (with new crypto contexts) and running them independently. The fragments contains a pointer to the base dm_crypt_io struct to handle reference counting, so the base one is properly deallocated after all the fragments are finished. In a low memory situation, this only uses one additional object from the mempool. If the mempool is empty, the next allocation simple waits for previous fragments to complete. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm crypt: tidy sectorMilan Broz
Prepare local sector variable (offset) for later patch. Do not update io->sector for still-running I/O. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm: remove dm header from targetsMikulas Patocka
Change #include "dm.h" to #include <linux/device-mapper.h> in all targets. Targets should not need direct access to internal DM structures. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm: publish array_too_bigMikulas Patocka
Move array_too_big to include/linux/device-mapper.h because it is used by targets. Remove the test from dm-raid1 as the number of mirror legs is limited such that it can never fail. (Even for stripes it seems rather unlikely.) Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm exception store: fix misordered writesMikulas Patocka
We must zero the next chunk on disk *before* writing out the current chunk, not after. Otherwise if the machine crashes at the wrong time, the "end of metadata" marker may be missing. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2008-10-21dm exception store: refactor zero_areaAlasdair G Kergon
Use a separate buffer for writing zeroes to the on-disk snapshot exception store, make the updating of ps->current_area explicit and refactor the code in preparation for the fix in the next patch. No functional change. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org
2008-10-21dm snapshot: drop unused last_percentMikulas Patocka
The last_percent field is unused - remove it. (It dates from when events were triggered as each X% filled up.) Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-21dm snapshot: fix primary_pe raceMikulas Patocka
Fix a race condition with primary_pe ref_count handling. put_pending_exception runs under dm_snapshot->lock, it does atomic_dec_and_test on primary_pe->ref_count, and later does atomic_read primary_pe->ref_count. __origin_write does atomic_dec_and_test on primary_pe->ref_count without holding dm_snapshot->lock. This opens the following race condition: Assume two CPUs, CPU1 is executing put_pending_exception (and holding dm_snapshot->lock). CPU2 is executing __origin_write in parallel. primary_pe->ref_count == 2. CPU1: if (primary_pe && atomic_dec_and_test(&primary_pe->ref_count)) origin_bios = bio_list_get(&primary_pe->origin_bios); ... decrements primary_pe->ref_count to 1. Doesn't load origin_bios CPU2: if (first && atomic_dec_and_test(&primary_pe->ref_count)) { flush_bios(bio_list_get(&primary_pe->origin_bios)); free_pending_exception(primary_pe); /* If we got here, pe_queue is necessarily empty. */ return r; } ... decrements primary_pe->ref_count to 0, submits pending bios, frees primary_pe. CPU1: if (!primary_pe || primary_pe != pe) free_pending_exception(pe); ... this has no effect. if (primary_pe && !atomic_read(&primary_pe->ref_count)) free_pending_exception(primary_pe); ... sees ref_count == 0 (written by CPU 2), does double free !! This bug can happen only if someone is simultaneously writing to both the origin and the snapshot. If someone is writing only to the origin, __origin_write will submit kcopyd request after it decrements primary_pe->ref_count (so it can't happen that the finished copy races with primary_pe->ref_count decrementation). If someone is writing only to the snapshot, __origin_write isn't invoked at all and the race can't happen. The race happens when someone writes to the snapshot --- this creates pending_exception with primary_pe == NULL and starts copying. Then, someone writes to the same chunk in the snapshot, and __origin_write races with termination of already submitted request in pending_complete (that calls put_pending_exception). This race may be reason for bugs: http://bugzilla.kernel.org/show_bug.cgi?id=11636 https://bugzilla.redhat.com/show_bug.cgi?id=465825 The patch fixes the code to make sure that: 1. If atomic_dec_and_test(&primary_pe->ref_count) returns false, the process must no longer dereference primary_pe (because someone else may free it under us). 2. If atomic_dec_and_test(&primary_pe->ref_count) returns true, the process is responsible for freeing primary_pe. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2008-10-21dm kcopyd: avoid queue shuffleKazuo Ito
Write throughput to LVM snapshot origin volume is an order of magnitude slower than those to LV without snapshots or snapshot target volumes, especially in the case of sequential writes with O_SYNC on. The following patch originally written by Kevin Jamieson and Jan Blunck and slightly modified for the current RCs by myself tries to improve the performance by modifying the behaviour of kcopyd, so that it pushes back an I/O job to the head of the job queue instead of the tail as process_jobs() currently does when it has to wait for free pages. This way, write requests aren't shuffled to cause extra seeks. I tested the patch against 2.6.27-rc5 and got the following results. The test is a dd command writing to snapshot origin followed by fsync to the file just created/updated. A couple of filesystem benchmarks gave me similar results in case of sequential writes, while random writes didn't suffer much. dd if=/dev/zero of=<somewhere on snapshot origin> bs=4096 count=... [conv=notrunc when updating] 1) linux 2.6.27-rc5 without the patch, write to snapshot origin, average throughput (MB/s) 10M 100M 1000M create,dd 511.46 610.72 11.81 create,dd+fsync 7.10 6.77 8.13 update,dd 431.63 917.41 12.75 update,dd+fsync 7.79 7.43 8.12 compared with write throughput to LV without any snapshots, all dd+fsync and 1000 MiB writes perform very poorly. 10M 100M 1000M create,dd 555.03 608.98 123.29 create,dd+fsync 114.27 72.78 76.65 update,dd 152.34 1267.27 124.04 update,dd+fsync 130.56 77.81 77.84 2) linux 2.6.27-rc5 with the patch, write to snapshot origin, average throughput (MB/s) 10M 100M 1000M create,dd 537.06 589.44 46.21 create,dd+fsync 31.63 29.19 29.23 update,dd 487.59 897.65 37.76 update,dd+fsync 34.12 30.07 26.85 Although still not on par with plain LV performance - cannot be avoided because it's copy on write anyway - this simple patch successfully improves throughtput of dd+fsync while not affecting the rest. Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Kazuo Ito <ito.kazuo@oss.ntt.co.jp> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2008-10-21[PATCH] pass fmode_t to blkdev_put()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch mdAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch dmAl Viro
ioctl() doesn't need BKL here Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] beginning of methods conversionAl Viro
To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] introduce __blkdev_driver_ioctl()Al Viro
Analog of blkdev_driver_ioctl() with sane arguments. For now uses fake struct file, by the end of the series it won't and blkdev_driver_ioctl() will become a wrapper around it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] lose unused arguments in dm ioctl callbacksAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] introduce fmode_t, do annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21md: allow extended partitions on md devices.NeilBrown
The new extended partition support provides a much nicer was to have partitions on md devices that the 'mdp' alternate major. We cannot really get rid of 'mdp' at this time, but we can enable extended partitions as that will probably make life easier for sysadmins. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-21md: use sysfs_notify_dirent to notify changes to md/dev-xxx/stateNeilBrown
The 'state' file for a device reports, for example, when the device has failed. Changes should be reported to userspace ASAP without the possibility of blocking on low-memory. sysfs_notify does have that possibility (as it takes a mutex which can be held across a kmalloc) so use sysfs_notify_dirent instead. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-21md: use sysfs_notify_dirent to notify changes to md/array_stateNeilBrown
Now that we have sysfs_notify_dirent, use it to notify changes to md/array_state. As sysfs_notify_dirent can be called in atomic context, we can remove the delayed notify and the MD_NOTIFY_ARRAY_STATE flag. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n libiscsi: fix locking in iscsi_eh_device_reset libiscsi: check reason why we are stopping iscsi session to determine error value [SCSI] iscsi_tcp: return a descriptive error value during connection errors [SCSI] libiscsi: rename host reset to target reset [SCSI] iscsi class: fix endpoint id handling [SCSI] libiscsi: Support drivers initiating session removal [SCSI] libiscsi: fix data corruption when target has to resend data-in packets [SCSI] sd: Switch kernel printing level for DIF messages [SCSI] sd: Correctly handle all combinations of DIF and DIX [SCSI] sd: Always print actual protection_type [SCSI] sd: Issue correct protection operation [SCSI] scsi_error: fix target reset handling [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted [SCSI] scsi_dh_alua: remove REQ_NOMERGE [SCSI] lpfc 8.2.8 : update driver version to 8.2.8 [SCSI] lpfc 8.2.8 : Add MSI-X support [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED ...
2008-10-16Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: fix input truncation in safe_delay_store() md: check for memory allocation failure in faulty personality md: build failure due to missing delay.h md: Relax minimum size restrictions on chunk_size. md: remove space after function name in declaration and call. md: Remove unnecessary #includes, #defines, and function declarations. md: Convert remaining 1k representations in linear.c to sectors. md: linear.c: Make two local variables sector-based. md: linear: Represent dev_info->size and dev_info->offset in sectors. md: linear.c: Remove broken debug code. md: linear.c: Remove pointless initialization of curr_offset. md: linear.c: Fix typo in comment. md: Don't try to set an array to 'read-auto' if it is already in that state. md: Allow metadata_version to be updated for externally managed metadata. md: Fix rdev_size_store with size == 0
2008-10-16md: fix input truncation in safe_delay_store()Dan Williams
safe_delay_store() currently truncates the last character of input since it tells strlcpy that the buffer can only hold 'len' characters, off by one. sysfs already null terminates the buffer, so just increase the last argument to strlcpy. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-16md: check for memory allocation failure in faulty personalitySven Wegener
It's a fault injection module, but I don't think we should oops here. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Neil Brown <neilb@suse.de>
2008-10-15md: build failure due to missing delay.hStephen Rothwell
Today's linux-next build (powerpc ppc64_defconfig) failed like this: drivers/md/raid1.c: In function 'sync_request': drivers/md/raid1.c:1759: error: implicit declaration of function 'msleep_interruptible' make[3]: *** [drivers/md/raid1.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/md/raid10.c: In function 'sync_request': drivers/md/raid10.c:1749: error: implicit declaration of function 'msleep_interruptible' make[3]: *** [drivers/md/raid10.o] Error 1 drivers/md/md.c: In function 'md_do_sync': drivers/md/md.c:5915: error: implicit declaration of function 'msleep' Caused by commit 6caa3b0bbdb474647f6bdd8a958ffc46f78d8d58 ("md: Remove unnecessary #includes, #defines, and function declarations"). I added the following patch. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13[SCSI] block: separate failfast into multiple bits.Mike Christie
Multipath is best at handling transport errors. If it gets a device error then there is not much the multipath layer can do. It will just access the same device but from a different path. This patch breaks up failfast into device, transport and driver errors. The multipath layers (md and dm mutlipath) only ask the lower levels to fast fail transport errors. The user of failfast, read ahead, will ask to fast fail on all errors. Note that blk_noretry_request will return true if any failfast bit is set. This allows drivers that do not support the multipath failfast bits to continue to fail on any failfast error like before. Drivers like scsi that are able to fail fast specific errors can check for the specific fail fast type. In the next patch I will convert scsi. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13md: Relax minimum size restrictions on chunk_size.NeilBrown
Currently, the 'chunk_size' of an array must be at-least PAGE_SIZE. This makes moving an array to a machine with a larger PAGE_SIZE, or changing the kernel to use a larger PAGE_SIZE, can stop an array from working. For RAID10 and RAID4/5/6, this is non-trivial to fix as the resync process works on whole pages at a time, and assumes them to be wholly within a stripe. For other raid personalities, this restriction is not needed at all and can be dropped. So remove the test on chunk_size from common can, and add it in just the places where it is needed: raid10 and raid4/5/6. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: remove space after function name in declaration and call.NeilBrown
Having function (args) instead of function(args) make is harder to search for calls of particular functions. So remove all those spaces. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: Remove unnecessary #includes, #defines, and function declarations.NeilBrown
A lot of cruft has gathered over the years. Time to remove it. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: Convert remaining 1k representations in linear.c to sectors.Andre Noll
This patch renames hash_spacing and preshift to spacing and sector_shift respectively with the following change of semantics: Case 1: (sizeof(sector_t) <= sizeof(u32)). ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In this case, we have sector_shift = preshift = 0 and spacing = 2 * hash_spacing. Hence, the index for the hash table which is computed by the new code in which_dev() as sector / spacing equals the old value which was (sector/2) / hash_spacing. Note also that the value of nb_zone stays the same because both sz and base double. Case 2: (sizeof(sector_t) > sizeof(u32)). ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (aka the shifting dance case). Here we have sector_shift = preshift + 1 and spacing = 2 * hash_spacing during the computation of nb_zone and curr_sector, but spacing = hash_spacing in which_dev() because in the last hunk of the patch for linear.c we shift down conf->spacing (= 2 * hash_spacing) by one more bit than in the old code. Hence in the computation of nb_zone, sz and base have the same value as before, so nb_zone is not affected. Also curr_sector in the next hunk stays the same. In which_dev() the hash table index is computed as (sector >> sector_shift) / spacing In view of sector_shift = preshift + 1 and spacing = hash_spacing, this equals ((sector/2) >> preshift) / hash_spacing which is the value computed by the old code. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: linear.c: Make two local variables sector-based.Andre Noll
This is a preparation for representing also the remaining fields of struct linear_private_data as sectors. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: linear: Represent dev_info->size and dev_info->offset in sectors.Andre Noll
Rename them to num_sectors and start_sector which is more descriptive. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: linear.c: Remove broken debug code.Andre Noll
conf->smallest_size is undefined since day one of the git repo.. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: linear.c: Remove pointless initialization of curr_offset.Andre Noll
Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: linear.c: Fix typo in comment.Andre Noll
Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: Don't try to set an array to 'read-auto' if it is already in that state.NeilBrown
'read-auto' is a variant of 'readonly' which will switch to writable on the first write attempt. Calling do_md_stop to set the array readonly when it is already readonly returns an error. So make sure not to do that. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: Allow metadata_version to be updated for externally managed metadata.NeilBrown
For externally managed metadata, the 'metadata_version' sysfs attribute is really just a channel for user-space programs to communicate about how the array is being managed. It can be useful for this to be changed while the array is active. Normally changes to metadata_version are not permitted while the array is active. Change that so that if the metadata is externally managed, the metadata_version can be changed to a different flavour of external management. Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-13md: Fix rdev_size_store with size == 0Chris Webb
Fix rdev_size_store with size == 0. size == 0 means to use the largest size allowed by the underlying device and is used when modifying an active array. This fixes a regression introduced by commit d7027458d68b2f1752a28016dcf2ffd0a7e8f567 Cc: <stable@kernel.org> Signed-off-by: Chris Webb <chris@arachsys.com> Signed-off-by: NeilBrown <neilb@suse.de>
2008-10-12raid, fastboot: hide RAID autodetect option if MD is compiled as a moduleAlan Jenkins
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-12raid: make RAID autodetect default a KConfig optionArjan van de Ven
RAID autodetect has the side effect of requiring synchronisation of all device drivers, which can make the boot several seconds longer (I've measured 7 on one of my laptops).... even for systems that don't have RAID setup for the root filesystem (the only FS where this matters). This patch makes the default for autodetect a config option; either way the user can always override via the kernel command line. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: NeilBrown <neilb@suse.de>
2008-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm: detect lost queue dm: publish dm_vcalloc dm: publish dm_table_unplug_all dm: publish dm_get_mapinfo dm: export struct dm_dev dm crypt: avoid unnecessary wait when splitting bio dm crypt: tidy ctx pending dm crypt: fix async inc_pending dm crypt: move dec_pending on error into write_io_submit dm crypt: remove inc_pending from write_io_submit dm crypt: tidy write loop pending dm crypt: tidy crypt alloc dm crypt: tidy inc pending dm exception store: use chunk_t for_areas dm exception store: introduce area_location function dm raid1: kcopyd should stop on error if errors handled dm mpath: remove is_active from struct dm_path dm mpath: use more error codes Fixed up trivial conflict in drivers/md/dm-mpath.c manually.
2008-10-10dm: detect lost queueAlasdair G Kergon
Detect and report buggy drivers that destroy their request_queue. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Stefan Raspl <raspl@linux.vnet.ibm.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org>