aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends/dvb-pll.c
AgeCommit message (Collapse)Author
2006-09-26V4L/DVB (4436): Dvb-pll support for MT352/ZL10353 based tuners.Chris Pascoe
Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's expectation that the PLL is directly accessible. On these boards, the PLL is actually hidden behind the demodulator, and as such can only be accessed via the demodulator's interface. It was failing to communicate with the PLL during an attach test and subsequently not connecting the tuner ops. By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility check can be bypassed. Do this for the affected boards. Also fix a possible NULL dereference at sleep time, which would otherwise be exposed by this change. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4386): Convert DVB devices to use dvb_attach()Andrew de Quincey
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4322): Fix dvb-pll autoprobingAndrew de Quincey
Trent Piepho pointed out that the pll test i2c transmission is slightly wrong; it was transmitting a zero length message, and then reading from the PLL. This was wrong; it should only be transmitting a single read i2c message. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4311): Fix possible dvb-pll oopsAndrew de Quincey
Supplying a NULL i2c adapter to dvb_pll_attach is allowed, for example with mt352 demods. However, the pll i2c probe will segfault because it does not check for this. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4294): Fix broken tda665x PLL definition.Andrew de Quincey
It was pointed out on the mailing list that this PLL definition is broken. I went back to the original dibusb driver and confirmed it used to use these settings, as well as consulting the datasheet. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4291): Add dvbpll i2c device check.Andrew de Quincey
Some cards have multiple possible addresses for their PLLs, with no other way to tell if a PLL is present or not apart from probing to see if an i2c device is present. This adds a quick check to see if an i2c device is present at the given i2c address. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a ↵Patrick Boettcher
pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3893): Convert calls from _pllbuf() to _calc_reg()Andrew de Quincey
Johannes Stezenbach suggested this change - definite improvement. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3920): Dvb: rename dvb_pll_tdvs_tua6034 to dvb_pll_lg_tdvs_h06xfMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3885): Convert dvb-pll to be a refactored tunerAndrew de Quincey
Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Remove BUG_ON() and convert to a soft error. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3830): Fix display name for LG TDVS-H06xFMichael Krufky
This patch fixes the display name for LG TDVS-H06xF tuners in both tuner and dvb-pll modules. Changing the names of the actual pll_desc struct and tuner definitions has been held back until after the dvb tuner refactoring gets merged. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-12V4L/DVB (3829): Fix frequency values in the ranges structures of the LG TDVS ↵Rusty Scott
H06xF tuners Frequency range values in the current driver for the LG TDVS H06xF tuners appear to have been a transposing of the 5 in the mid range 160-455 instead of 165-450. This patch corrects the pll programming for these tuners as per the datasheet. Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08V4L/DVB (3411): FE6600 is a Thomson tunerMichael Krufky
- The tuner used in DViCO FusionHDTV DVB-T hybrid is made by Thomson - renamed tuner and dvb_pll structs accordingly Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08V4L/DVB (3408): DViCO FusionHDTV DVB-T Hybrid and ZL10353-based FusionHDTV ↵Chris Pascoe
DVB-T Plus support Add support for the FE6600 tuner used on the DVB-T Hybrid board. Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3267): Add support for the Avermedia 777 DVB-T cardJose Alberto Reguero
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3435): rename cb variable names in tuner structures for global ↵Michael Krufky
consistency - rename cb variable names in tuner structures for global consistency Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3414): rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmvMichael Krufky
- rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmv Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3413): Kill nxt2002 in favor of the nxt200x moduleMichael Krufky
- Kill nxt2002 module in favor of nxt200x. - Repair broken nxt2002 support in the nxt200x module. - Make the flexcop driver use nxt200x instead of the nxt2002 module for the Air2PC 2nd generation PCI card. - Remove the nxt2002 module from cvs and kernel build. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-15V4L/DVB (3389): Samsung TBMV30111IN has 6 entriesMichael Krufky
- Samsung TBMV30111IN has 6 entries Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-12V4L/DVB (3351): adding support for knc1 Tv Star dvb-sRegis Prevot
- Added knc1 tv star dvb-s support with philips tuner sd1878. Signed-off-by: Regis Prevot <regis.prevot@anevia.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-09V4L/DVB (3196): correct Thomson DTT 761x frequency rangesMichael Krufky
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-09[PATCH] dvb: add nxt200x frontend moduleKirk Lapray
* nxt200x.c, nxt200x.h - New frontend module that supports both NXT2002 and NXT2004. So far, only tested on NXT2004. After testing on NXT2002, we should deprecate the nxt2002 module, and implement this one instead on the applicable cards. * get_dvb_firmware: - Added support for the NXT2004 firmware. This firmware works with both the ATI HDTV Wonder and the AVerTVHD MCE a180. This was originally written by Jean-Francois Thibert * dvb-pll.c - Fixed minimum frequency for tuv1236d. It seems that the data sheets are wrong. Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] dvb: add support for plls used by nxt200xKirk Lapray
- Added support for the following: Philips TUV1236D - ATI HDTV Wonder ALPS TDHU2 - AverTVHD MCE A180 Samsung TBMV30111IN - Air2PC ATSC - 2nd generation These will be used in a new NXT200X driver that incorporates the NXT2002 driver and adds support for a couple NXT2004 based cards. Signed-off-by: Kirk Lapray <kirk.lapray@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] dvb: Add support for Air2PC/AirStar 2 ATSC 3rd generation (HD5000)Michael Krufky
Added support for Air2PC/AirStar 2 ATSC 3rd generation (HD5000) Signed-off-by: Taylor Jacob <rtjacob@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-08[PATCH] dvb: lgdt330x frontend: some bug fixes & add lgdt3303 supportMichael Krufky
- Structural changes within lgdt330x driver, framework now supports both chips... tested OK on lgdt3302 and lgdt3303. - Add LG/TUA6034 dvb_pll_desc for ATSC with LG TDVS-H062F & DViCO FusionHDTV5. - Fixed LGDT330X signal strength: For now, always set it to 0. - Corrected LGDT330X boundary condition error in read_snr: dB calculation. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27[PATCH] DVICO Fusion DVB-T1 Tuner (LG-Z201) fixGregory B Frost
It is a small modification to the table that defines the way that the LG-Z201 tuner is controlled for the DVICO Fusion DVB-T1 tuner card. I believe that a mistake was made when the dvb tuner code was reorganised (to use a generic table for the tuner information instead of inline code) and as a result, the DVICO card doesn't tune properly. The modification I have made to the table makes it behave like it did with the old inline tuner code that worked. The patch is on top of the 2.6.12 kernel. Signed-off-by: Gregory B Frost <frosts1@hotkey.net.au> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] v4l: add DVB support for DViCO FusionHDTV3 Gold-TMichael Krufky
- Correct sync byte for MPEG-2 transport stream packets. - Add lgdt3302 as dependency of cx88-dvb in Kconfig. - Add dvb support in v4l for DViCO FusionHDTV3 Gold-T using lgdt3302 frontend. This adds support for a different board from the previous (Gold-Q) patch. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] dvb: frontend: add driver for LGDT3302Mac Michaels
Add support for LGDT3302 (ATSC VSB/QAM) used in DViCO FusionHDTV3 Gold. Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] dvb: frontend: add ALPS TDED4 PLLPatrick Boettcher
Add dvb_pll_desc for ALPS TDED4 used in Nebula USB boxes. Changed the name-field of the FMD1216. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] dvb: frontend: add FMD1216ME PLLPatrick Boettcher
o change dvb-pll desc to take the frequency as parameter for setbw-callback into consideration o added dvb-pll desc for Philips FMD1216ME (needed for cxusb) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] dvb: Add generalized dvb-usb driverJohannes Stezenbach
Add generalized dvb-usb driver which supports a wide variety of devices. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 23:57:21 +0000