aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2008-11-11V4L/DVB (9524): af9013: fix bug in status readingroel kluin
- ! has a higher precedence than & Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9316): s5h1411: Power down s5h1411 when not in useDevin Heitmueller
Power down the s5h1411 demodulator when not in use (on the Pinnacle 801e, this brings idle power from 123ma down to 84ma). Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Acked-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9315): s5h1411: Skip reconfiguring demod modulation if already at ↵Devin Heitmueller
the desired modulation If we are already at the desired modulation, there is no need to reconfigure the demod (at a tuning time cost) Note that this change revealed that although the datasheet says the demod starts out in VSB-8 mode, the first tuning was failing consistently unless we went through the work of setting the registers. So add a field to denote this case so we always do the enable_frontend call, even if the first tuning request is for VSB-8. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9314): s5h1411: Perform s5h1411 soft reset after tuningDevin Heitmueller
If you instruct the tuner to change frequencies, it can take up to 2500ms to get a demod lock. By performing a soft reset after the tuning call (which is consistent with how the Pinnacle 801e Windows driver behaves), you get a demod lock inside of 300ms Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9313): s5h1411: Add the #define for an existing supporting I/FSteven Toth
s5h1411: Add the #define for an existing supporting I/F Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9312): s5h1411: Remove meaningless codeSteven Toth
s5h1411: Remove meaningless code Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9311): s5h1411: bugfix: Setting serial or parallel mode could ↵Steven Toth
destroy bits Adding a serialmode function to read/and/or/write the register for safety. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9310): s5h1411: read_status() locking detection fixes.Steven Toth
This includes new bit definitions for previously unknown bits. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9309): s5h1411: I/F related bugfix for 3.25 and remove spurious defineSteven Toth
This should improve performance. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9308): s5h1411: Improvements to the default registersSteven Toth
s5h1411: Improvements to the default registers Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilationIgor M. Liplianin
Remove warning message during cx88-dvb compilation. Also fixes double underline in function and struct names. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be constGeert Uytterhoeven
| drivers/media/dvb/frontends/cx24116.c:573: warning: passing argument 3 of 'cx24116_writeregN' discards qualifiers from pointer target type Make the `data' input pointer parameter of cx24116_writeregN() const to kill the warning. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9270): cx24116: optimise emulated auto-pilotChristophe Thommeret
Christophe divulged the following: "Since 8PSK (and higher mod) signals are very likely to have pilot symbols, pilot_auto should start with pilot_on for 8PSK. And since QPSK signals are unlikely to have pilot, pilot_auto should start with pilot_off for QPSK. Without the patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~900ms with patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~100ms " This patch does as Cristophe asks. In emulated auto-pilot we choose pilot-on for tuning PSK_8 and pilot-off for tuning QPSK. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9260): cx24123: Checkpatch complianceSteven Toth
cx24123: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9259): s5h1411: Checkpatch complianceSteven Toth
s5h1411: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9258): s5h1409: Checkpatch complianceSteven Toth
s5h1409: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9257): cx24116: Checkpatch compliance #3Steven Toth
cx24116: Checkpatch compliance #3 Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9256): cx22702: Checkpatch complianceSteven Toth
cx22702: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9255): tda10048: Checkpatch complianceSteven Toth
tda10048: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9254): cx24116: Checkpatch compliance #2Steven Toth
cx24116: Checkpatch compliance #2 Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9253): cx24116: Checkpatch complianceSteven Toth
cx24116: Checkpatch compliance Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by ↵Steven Toth
default. cx24116: Change the default SNR units back to percentage by default. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.Steven Toth
I've retained the older percentage code after discussing this with Darron Broad, but made the ESNO option default. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16Steven Toth
... and cleanup any drivers using them. I've also removed NBC_QPSK and modified the cx24116 driver to check the delivery_type also, removing some excess namespace baggage. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.Igor M. Liplianin
Add support for DvbWorld USB cards with STV0288 demodulator. Those cards use Earda EDS-1547 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9175): Remove NULL pointer in stb6000 driver.Igor M. Liplianin
Remove NULL pointer in stb6000 driver, as it raises error for DvbWorld USB card. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator.Igor M. Liplianin
Allow custom inittab for ST STV0288 demodulator, as it is needed for DvbWorld USB card. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the ↵Darron Broad
cx24116 demod. Add some sanity checking to data input via S2API to the cx24116 demod. This patch is valid for both s2-mfe and s2. It was found when testing KAFFEINE with S2API support that invalid modulation modes amongst other parameters were being delivered to the demod. In order to debug this sanity checking has been added. An example session would involve kaffeine setting QAM_AUTO when querying DVB-T, then later when trying to tune to DVB-S this cached value would be presented in error. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9149): hvr950q: led feedback based on snrMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9146): af901x: fix some compiler errors and warningsAntti Palosaari
- cast firmware data to u8 - remove cpu_to_le16 from switch-case label Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9145): af901x: clean-upAntti Palosaari
- remove unnecessary #undef's Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9105): correct Makefile symbol for stv0288 frontendJanne Grunau
Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9026): Add support for ST STV0288 demodulator and cards with it.Igor M. Liplianin
Add support for ST STV0288 demodulator and cards with it, such as TeVii S420. Patch is co-authored with Georg Acher <acher@baycom.de> Signed-off-by: Georg Acher <acher@baycom.de> Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9017): Add support for Silicon Laboratories SI2109/2110 demodulators.Igor M. Liplianin
Add support for Silicon Laboratories SI2109/2110 demodulator and cards with it, such as DvbWorld PCI2002. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9015): S2API: cx24116 register description fixes.Darron Broad
From the author: Here is a simple patch detailing some reverse engineered register detail lost in my latest merge. The comments in the code refer to this register but it is never defined. This corrects this. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9014): History update: MPEG initialization in cx24116.Igor M. Liplianin
Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. For example, HVR4000 uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG stream was broken on that cards for symbol rates > 30000 kSyms/s. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9013): S2API: cx24116 Rolloff changes, sysctls cleanup, isl power ↵Darron Broad
changes. Remove the debugging sysctls. Rolloff was broken, not it works as expected and has been tested in kaffeine. Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9011): S2API: A number of cleanusp from the last 24 months.Darron Broad
I was given these changes by Darron Broad and Igor Liplianin and represent a series of patches they've been making to the cx24116 driver over the last two years. Changes for handling symbolrates >30Ksps Tone handling changes. Diseqc support. Sleep support, shutting down the clocks correctly. Cleanup on ROLL_OFF and PILOT support. *** ST - We need to cleanup the sysclt control, this is abnormal in a demod driver. We should work towards understanding the missing API's and ensure we have them in S2API. *** Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9004): S2API: Implement GET/SET handing to the demodsSteven Toth
The frontends will be notified (if they chose) of all _get and _set commands so they can help determine result or action. Results are now returned to userspace correctly. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8996): S2API: typedefs replaced, _SEQ_'s removed, fixed 16 command ↵Steven Toth
arrays replaced After discussion the following changes were made: 1. Removed the typedefs in frontend.h, use structures. 2. In the frontend.h, remove the 16 command limit on the API and switch to a flexible variable length API. For practical reasons a #define limits this to 64, this should be discussed. 3. Changed dvb-core ioctl handing to deal with variable sequences of commands. tune-v0.0.3.c is required to use this API, it contains the interface changes. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8995): S2API: tv_ / TV_ to dtv_ / DTV_ namespace changesSteven Toth
The group preferred dtv_ over tv_, this implements it. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8994): Adjust MPEG initialization in cx24116Igor M. Liplianin
Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8993): cx24116: Fix lock for high (above 30000 kSyms) symbol ratesIgor M. Liplianin
cx24116: Fix lock for high (above 30000 kSyms) symbol rates Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8986): cx24116: Adding DVB-S2 demodulator supportSteven Toth
Adds support for the COnexant cx24116 DVB-S2 demodulator. TODO: checkpatch cleanup. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8973): af9013: fix compile error coming from u64 divAntti Palosaari
- fix compile error coming from u64 div Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8971): initial driver for af9013 demodulatorAntti Palosaari
- initial driver for the Afatech AF9013 demodulator Signed-off-by: Antti Palosaari <crope@iki.fi> [mchehab.redhat.com: having a global var called 'debug' is not a good idea. rename it to af9013_debug] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8946): dib7000m: fix powerpc build errorHans Verkuil
The dib7000m_i2c_enumeration() function is not used by any public drivers, however some prototype board use it. So '#if 0' for now, but don't remove it. Thanks to Patrick Boettcher for clarifying this. Cc: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8906): v4l-dvb: fix assorted sparse warningsHans Verkuil
Fix sparse warnings. None are serious, but cutting down on these helps find future serious sparse warnings/errors. Redid the av7710.c patch based on a suggestion by Oliver Endriss. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8890): budget: Add callback to load firmware for the TDHD1 tunerOliver Endriss
Supply callback to load firmware for the TDHD1 tuner (using request_firmware). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8888): budget: Support Activy DVB-T with TDHD1 tunerOliver Endriss
Support Fujitsu-Siemens Activy DVB-T card rev AL (ALPS TDHD1-204A tuner). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 08:40:40 +0000