aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2006-09-26V4L/DVB (4457): Remove dib3000-common-modulePatrick Boettcher
removing the dib3000-common-module. The common stuff is not common anymore - it will be only used by the 3000mb-driver. A new 3000mc/p-driver will be added which will share common stuff with dib7000. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB: Update for MT2060 to use dvb_tuner_opsOlivier DANET
new tuner api minor fixes for tuning Signed-off-by: Olivier DANET <odanet@caramail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4454): Corrected debugging output of the mt2060Patrick Boettcher
When debugging was disabled at lot of empty lines where printed anyway. Reported by Rolf Ahrenberg and Sergei Haller. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB: MT2060: Code cleanups, adding to new build-mechanismPatrick Boettcher
Some minor code cleanups and added the MT2060 to new v4l-dvb-build-system, preliminarily under dvb/frontends. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4451): MT2060: IF1 Offset from EEPROM, several updatesPatrick Boettcher
- AGC gain set to 3 - The tuning sequence has been changed to match the DibCom driver ( from I2C spy captures ) - For LITE-ON adapters : The IF1 frequency is now tuned according to the calibration values stored in EEPROM. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Olivier DANET <odanet@caramail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB: Cleanups for mt2060-integrationPatrick Boettcher
- some coding style fixes for newly added mt2060 - moved agc-config from fixed values in dib3000mc to configurable ones - whitespace clean-ups for usb-id-file Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB: Adding support for MT2060 and thus for some DVB-USB-devices based on itOlivier DANET
- MT2060 tuner driver - Added support for some USB DVB-T devices based on Dib3000P Signed-off-by: Olivier DANET <odanet@caramail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4436): Dvb-pll support for MT352/ZL10353 based tuners.Chris Pascoe
Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's expectation that the PLL is directly accessible. On these boards, the PLL is actually hidden behind the demodulator, and as such can only be accessed via the demodulator's interface. It was failing to communicate with the PLL during an attach test and subsequently not connecting the tuner ops. By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility check can be bypassed. Do this for the affected boards. Also fix a possible NULL dereference at sleep time, which would otherwise be exposed by this change. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4435): HW algoYeasah Pell
Change this card to use HW ALGO tuning Signed-off-by: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4434): Change BER configYeasah Pell
Change the bit error counter configuration to be the actual BER. Originally it was reporting UCB. Signed-off-by: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4433): Soft decision thresholdYeasah Pell
Set the Soft decision threshold properly for the specified FEC Signed-off-by: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4428): Fix tda826x detectionAndrew de Quincey
The tda826x detection was (correctly) cleaned up earlier, but unfortunately changing the number of received i2c messages from 2 -> 1 was missed. This fixes it. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4424): Add missing dvb-pll Kconfig infrastructureAndrew de Quincey
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4405): Add missing KConfig I2C dependenciesAndrew de Quincey
This was breaking the build if i2c was not previously set Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4403): Use dprintk in tda826x.Andrew de Quincey
As opposed to printk() at the moment, which will fill logs uselessly Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4401): Disable tda10086 debug by default.Andrew de Quincey
Left on by accident. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4400): Tda826x: Remove 0-byte I2C write; put tuner_ops info in ↵Trent Piepho
static struct Remove the 0-byte write that precedes 2-byte read. Move initialize the info field in the static tuner_ops definition, so that it doesn't need to be done manually. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4396): Add drivers for tda10086 + tda826x chipsAndrew de Quincey
TDA10086 is a new DVB-S demodulator TDA826x is a DVB-S Silicon Tuner Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4389): Remove duplication _release() op.Andrew de Quincey
I added a duplicate method during one of the previous dvb_attach attempts. This removes the unnecessary duplication. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4387): Add Kconfig infrastructure for dvb_attachAndrew de Quincey
Allow it to be en/disabled Disable it in < 2.6.17 due to symbol_xxx() bug Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4386): Convert DVB devices to use dvb_attach()Andrew de Quincey
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4384): Remove remaining static function callsAndrew de Quincey
Rewrote _write() calls to use write() op. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4383): Convert SEC drivers to new frontend APIAndrew de Quincey
Convert SEC drivers to new frontend API Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4608b): i2c deps fix on DVBAndrew de Quincey
Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4322): Fix dvb-pll autoprobingAndrew de Quincey
Trent Piepho pointed out that the pll test i2c transmission is slightly wrong; it was transmitting a zero length message, and then reading from the PLL. This was wrong; it should only be transmitting a single read i2c message. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4311): Fix possible dvb-pll oopsAndrew de Quincey
Supplying a NULL i2c adapter to dvb_pll_attach is allowed, for example with mt352 demods. However, the pll i2c probe will segfault because it does not check for this. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4294): Fix broken tda665x PLL definition.Andrew de Quincey
It was pointed out on the mailing list that this PLL definition is broken. I went back to the original dibusb driver and confirmed it used to use these settings, as well as consulting the datasheet. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4291): Add dvbpll i2c device check.Andrew de Quincey
Some cards have multiple possible addresses for their PLLs, with no other way to tell if a PLL is present or not apart from probing to see if an i2c device is present. This adds a quick check to see if an i2c device is present at the given i2c address. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-10[PATCH] release_firmware() fixesMagnus Damm
Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30V4L/DVB (4289): Missing statement in drivers/media/dvb/frontends/cx22700.cEric Sesterhenn
Stumbled over this because of coverity (id #492), seems like we are missing a return statement here and fail to do proper bounds checking. If this assumption is false we should at least change the identation to make it clear Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30V4L/DVB (4284): Cx24123: fix set_voltage function according to the specsSaqeb Akhter
The set_voltage function in cx24123.c was corrected to match how it is described in the CX24123 specs, producing the correct behaviour for cards that require it. Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Saqeb Akhter <johoja@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30typo fixes: bandwith -> bandwidthAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-25V4L/DVB (4122): Lgdt330x: fix missing line in VSB snr decoding logicMac Michaels
- fix missing line in VSB snr decoding logic for lgdt3303 Signed-off-by: Mac Michaels <wmichaels@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a ↵Patrick Boettcher
pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4032): Fix Pinnacle 300iAndrew de Quincey
I had broken the mt352 tuning when a non-directly connected PLL was used - uncommon, but this is what is used on the pinnacle card. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4013): Change the sweeprate for TT C1500 using QAM64Per Dalén
This patch changes the sweeprate for TT C1500 using QAM64. It has been proven to work using QAM64 at a SRate of 6875 for the two Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4012): Fix cx24123 diseqcAndrew de Quincey
Rework diseqc support to be more in line with the other demod drivers. Fix Nova-S-Plus/Nova-SE2 diseqc. Cleanup API. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3984): Fix CI interface on KNC1 DVBT and DVBC cardsAndrew de Quincey
These cards need special handling for CI - reinitialising the frontend device when the CI module is reset. Additionally the tda10021 needs to be set into a different transport stream mode when a CI module is present. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3935): Add missing pll gate control callsAndrew de Quincey
I'd missed some of these out, breaking the av7110 tuning. I then checked for more and added them in where necessary. They may not actually be necessary in all these locations, but if not, they'll simply have no effect. Add small delay to stv0299 pll gate control to fix tuning problems. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3934): Support new dvb-ttusb-budget boards with stv0297Thomas Kaiser
Added config switch to stv0297 to control i2c STOP during write behaviour. Update frontend init in dvb-ttusb-budget. Enable i2c STOP on other users of stv0297. Signed-off-by: Thomas Kaiser <linux-dvb AT kaiser-linux.li> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3933): Add isl6421 moduleAndrew de Quincey
Driver for the ISL6421 LNB chip Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3932): Convert lnbp21 to a moduleAndrew de Quincey
Convert lnbp21.h into a linux kernel module. Fix up previous users to use it. Convert dvb-ttusb-budget to use it. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3894): Fix tda10046 tuningAndrew de Quincey
I'd missed the i2c gate ctrl function out of the tda10046, so tuning didn't work Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3893): Convert calls from _pllbuf() to _calc_reg()Andrew de Quincey
Johannes Stezenbach suggested this change - definite improvement. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3920): Dvb: rename dvb_pll_tdvs_tua6034 to dvb_pll_lg_tdvs_h06xfMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3900): Rename fe_lgh06xf.h to lg_h06xf.hMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3890): Add support for non-attached tuners to zl10353Andrew de Quincey
Add no_tuner setting like in mt352. Update to use correct tuner API calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3889): Sort out support for non-attached tuners on mt352Andrew de Quincey
Make it use set_params/pllbuf as appropriate so it works with dvb_pll_attach()ed tuners. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 23:35:18 +0000