aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/ttpci/budget-av.c
AgeCommit message (Collapse)Author
2007-04-27V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE ↵Hartmut Birr
V1.0 card Make the inversion setting configurable. The KNC ONE V1.0 uses non inverted setting for the inversion and add the KNC ONE V1.0 card. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5543): Tda10023: Add support for frontend TDA10023Hartmut Birr
Add support for the frontend TDA10023 and add cards that need the tda10023. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Georg Acher <acher@in.tum.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-CHartmut Birr
Remove the polarity switching of the clock for the DVB-C cards in budget-av.c. This hack is no longer necessary because the saa7146 can do the job to remove the additional FEC bytes from the TS. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21V4L/DVB (5189): Budget-av: Call saa7146_vv_release on exitMarco Schluessler
Call saa7146_vv_release on exit. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4921): Budget-av, budget-ci: Fix MC1 register programmingHartmut Birr
Remove bogus read during MC1 programming. A '1' bit could never be cleared using the old code. Use MASK_xx macros. Signed-off-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4918): Budget-av: Add delay for frontend power-onHartmut Birr
Added a delay to give the frontend a little bit time for power-on. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4916): Av7110,budget,budget-ci,budget-av: Use interrupt mode for ↵Oliver Endriss
I2C transfers Use interrupt mode for I2C transfers. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4867): Whitespace cleanupMichael Krufky
- adhere to 80-column limit - replace some spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4855): Support KNC1 DVBC cards with alternative tda10021 i2c addressAndrew de Quincey
For some reason, some of these cards have the tda10021 configured to a different address. This adds support for such cards Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4833): Patch for SATELCO EasyWatch PCI (DVB-C)Thomas Hamm
Add support for Satelco EasyWatch PCI DVBC cards Signed-off-by: Thomas Hamm <thhamm@t-online.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4607): Port budget-av to use the new tua6100 driverAndrew de Quincey
Port budget-av to use the new tua6100 driver Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4501): Add support for knc one dvb-s plus with 1894:0011Christoph Pfister
Apparently there are two types of knc1 dvb-s plus cards with different tuners (as for the knc1 dvb-s ones). This patch adds support for those cards with subsystem id 1894:0011. Successfully tested by: Benjamin Weber <benny1990@gmail.com> Signed-off-by: Christoph Pfister <christophpfister@gmail.com> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4500): Fix KNC1 DVBC supportAndrew de Quincey
This actually needs the same configuration as the other DVBC cards; simply no one had managed to test before to find out. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4391): Refactor dvb_detach calls into a single dvb_frontend_detach ↵Andrew de Quincey
function. Remove buggy dvb_detach() macro and replace with unified dvb_frontend_detach() call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26V4L/DVB (4386): Convert DVB devices to use dvb_attach()Andrew de Quincey
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29V4L/DVB (4323): [budget/budget-av/budget-ci/budget-patch drivers] fixed DMA ↵Oliver Endriss
start/stop code Fix bug reported by Andrew de Quincey: After cold boot the saa7146 DMA did not start if the demuxer was opened before the frontend has locked to the signal. DMA transfers will be started now if (and only if) the frontend is locked and data should be sent to the demuxer. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30V4L/DVB (4277): Fix CI interface on PRO KNC1 cardsAndrew de Quincey
The original driver had a restriction that if a card as an saa7113 chip, then it cannot have a CI interface. This is not the case. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30V4L/DVB (4276): Fix CI on old KNC1 DVBC cardsAndrew de Quincey
These cards do not need the tda10021 configuration change when data is streamed through a CAM module. This disables it for these ones. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4073): Support for new version of Satelco EasyWatch DVB-S lightLothar Englisch
This patch adds support for Satelco EasyWatch DVB-S light card, a clone of the KNC 1, with PCI subsystem ID 1894:001e Signed-off-by: Lothar Englisch <Lothar.Englisch@lycos.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a ↵Patrick Boettcher
pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3984): Fix CI interface on KNC1 DVBT and DVBC cardsAndrew de Quincey
These cards need special handling for CI - reinitialising the frontend device when the CI module is reset. Additionally the tda10021 needs to be set into a different transport stream mode when a CI module is present. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3895): Additional frontend_init safety checksAndrew de Quincey
Don't try and set the tuner ops if the demod was not detected. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3877): Convert ttpci/budget-av to refactored tuner codeAndrew de Quincey
Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3805): Fix KNC1 card frontend detectionAndrew de Quincey
Since I reordered the CI/frontend detection, it turns out the frontend needs to have a GPIO set to power it on; otherwise frontend init fails. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-12V4L/DVB (3740): Fix oops in budget-av with CIAndrew de Quincey
Now that the CI code reinitialises the frontend, need to move the CI initialisation to after the frontend init in order to ensure the frontend is always in a good state. Fixes an oops caused by the frontend being NULL as well. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-02V4L/DVB (3673): Fix budget-av CAM resetAndrew de Quincey
Unfortunately on the budget-av board, the CAM reset line is tied to the frontend reset line, so resetting the CAM also zaps the frontend. This breaks the tda1004x at least, and causes it to fail to tune until the budget-av module is reloaded. This patch adds an exported function to dvb_frontend that allows a card to forcibly reinitialise a frontend. The budget-av now does this on CAM reset, which corrects this problem. since they do not tie the CAM reset line to the frontend reset line. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-27V4L/DVB (3377): Support for Satelco EasyWatch DVB-S lightThilo Berger
Support for Satelco EasyWatch DVB-S light. Signed-off-by: Thilo Berger <thilo_berger@gmx.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-12V4L/DVB (3351): adding support for knc1 Tv Star dvb-sRegis Prevot
- Added knc1 tv star dvb-s support with philips tuner sd1878. Signed-off-by: Regis Prevot <regis.prevot@anevia.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-11V4L/DVB (3344a): Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris
Conversions from kmalloc+memset to k(z|c)alloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-09V4L/DVB (3218): Whitespace cleanupsMichael Krufky
- minor whitespace cleanups Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2454): Port code for SU1278/SH2 (TUA6100) from pre-refactored codeAndrew de Quincey
- Port code for SU1278/SH2 (TUA6100) from pre-refactored code Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2428): Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI moduleAndrew de Quincey
- Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI module Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-01[PATCH] DVB: Fixed DiSEqC timing for saa7146-based budget cardsOliver Endriss
Fixed DiSEqC timing for saa7146-based budget cards (speed-up ioctls using SAA7146_I2C_SHORT_DELAY) Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] dvb: stv0299: reduce i2c xfer and set register 0x12 from inittabOliver Endriss
stv0299_set_frontend(): reduced number of i2c transfers, set register 0x12 from inittab Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] dvb: Remove broken stv0299 enhanced tuning codeAndrew de Quincy
Remove broken stv0299 enhanced tuning code Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] dvb: budget-av: enable frontend on KNC1 Plus cardsAndrew de Quincey
Enable frontend on KNC plus cards. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] dvb: budget-av: fixes for CI interfaceAndrew de Quincey
Fixes for CI interface. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] dvb: frontend: stv0299: pass i2c bus to pll callbackAndreas Oberritter
Pass a pointer to the i2c bus to the pll callbacks (stv0299 only). It was not possible to tell which i2c bus should be used if an adapter has multiple frontends on multiple i2c buses. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] dvb: fix kobject names (no slashes)Julian Scheel
The / in the driver name (budget dvb /w video in) is not a valid character for device names - removed it, now it works! Same for ttusb-budget. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] dvb: ttpci: budget-av / tu1216 fix for QAM128Johannes Stezenbach
Fix for QAM128 in VHF band suggested by Timo Helkiö. Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07[PATCH] dvb: frontend: tda1004x updateHartmut Hackmann
o added config options for IF frequency and AGC o support DSP boot from on board eeprom o added pll sleep call Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: budget-av: CI fixesJohannes Stezenbach
- remove enable_ci, ci interface is assumed to be present if the saa7113 is not found. - reduce the delay when checking for saa7113 - clean up the cam reset according to specifications - turn off Vcc to the cam slot if cam is removed or fails reset - remove cam reset in ciintf_init - clean up printks (KERN_) - move gpio setting into saa7113_init - clean up unreadable frontend_init (Kenneth Aafloy) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: modified dvb_register_adapter() to avoid kmalloc/kfreeJohannes Stezenbach
Modified dvb_register_adapter() to avoid kmalloc/kfree. Drivers have to embed struct dvb_adapter into their private data struct from now on. (Andreas Oberritter) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] dvb: add support for KNC-1 cardsJohannes Stezenbach
Support KNC-1 Plus DVB-T and similar KNC-1 cards (Alexander Riedel) Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 12:51:18 +0000